Converting from 2D to 3D not working for me

I am trying to follow the tutorial "Converting from 2D to 3D" and it is 'not working for me.'  When I open the image 'archer...' I do not get layers, but only the background image, and consequently no 3DAxis widget appears.
This is my first try at this, and I am stuck trying to figure out what is wrong.
I am running Adobe Photoshop CS4 Extended, version 11.01 on Vista, with 4GB of RAM, 500GB HD
Processor speed 2200MHz
NVIDIA GeForce 7100
Memory available to PS 3255MB
Memory used by PS 70 percent
If anybody could please point me in the right direction, I would greatly appreciate it!
christian

it can work with the Background layer just fine, go to 3d->New Shape from Layer->Cone (or whatever) and then select one of the 3D tools and it should appear. Note though that OpenGL drawing must be enabled in Edit->Preferences->Performance to be able to see it.
Using the 3D Axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

Similar Messages

  • Converting from MP3 to AAC not working

    When I try to convert any of my songs in iTunes I get an error message saying: "An unknown error occurred (0x77686174)." This only happens when trying to convert to AAC. I have tried to convert to AIFF, and Apple Loseless Encoder and it works. I have also tried the default 128kbps and many others. Can anyone help?

    When I try to convert any of my songs in iTunes I get an error message saying: "An unknown error occurred (0x77686174)."
    hi killbrad!
    hmmm. i've seen posts on this topic. see:
    http://ipodgarage.com/phpBB2/viewtopic.php?t=494&sid=79e818827474b53cfdab3c8b619 aa0e2
    i've also seen toonz say (my fault for any misreading of her post) that it's a QT error message saying something like "codec not found". so if the workarounds aren't helpful for you, we could try a careful standalone QT reinstall. see:
    http://discussions.apple.com/message.jspa?messageID=1157322#1157322
    keep us posted.
    love, b

  • FA segment derivation from business area substitution not working for AFABN

    Hello Gurus,
    I have a FA substitution of Field 'segment' is substituted by Field BSEG-GSBER.
    But its not picking the Business area as Segment for the 'AFABN' postings.
    Thanks for your early reply.
    Thanks and regards.
    Gopa

    Hi, AFABF it's depriciation?
    Try do it with tcode obbh.
    And if you have some problems with substitution simulate it for  inspection

  • Converting from aiff to mpg not working

    I followed the instructions provided here: http://support.apple.com/kb/ht1550
    to convert an aiff file to an mp3 file, but after I do the converstion the file is still an aiff. I do a 'get info' and it says it is an aiff file, and also I try dragging it to my desktop and it an aiff file.
    I originally created the file in garageband and imported it into itunes. The file is 20 minutes long.
    Strangely I can convert a short song of 3 minutes successfully from aiff to mg3.
    Any ideas of what could be happening here and how to fix it?

    iTunes converts but makes a new file and also leaves the original.

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • Continuity not working for iWork from iPhone to Mac

    Continuity not working for iWork. When I open numbers on my mac it can be continued to iPhone, however if I open numbers on iPhone the extended dock for numbers is not showing on mac please help!
    Iphone 5s iOS 8.0.2
    MacBook Air on Yosemite

    If you mean photo stream, that's because they only remain in iCloud for 30 days (even though your last 1000 photo stream photos remain on your iOS devices until you delete them).  When you first enable photo stream, you only get the photos from the last 39 days as older photos are no longer in iCloud.
    If you want to stream your old photo stream photos to iPhoto, add them to a shared photo stream on your phone and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99.  Alternatively, you can import them using your usb cable as explained here: http://support.apple.com/kb/HT4083.

  • I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
    Mylenium

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Half Day LOP / Unpaid Absence not working for payroll india

    Dear Gurus,
    I have created Unpaid leave which is working correctly when we maintain full day absence in infotype 2001.
    But it is not working for partial absence ie, half day.
    I would really appreciate if you help me out on this issue.
    Thanks,
    Rajesh Badita

    Dear Venkey / Rajesh,
    My issue is resolved. We have tried with Custom PCR which will convert absence days into hours. With this we are able to achieve the desired result.
    Copied from standard PCR "INP1" to "ZNP1" and modified "/801 partial period factor 1" logic. Below is the PCR for your kind reference.
    RTE=TKSOLL
    RTE*8
    RTE-TSAU**
    RTE/8
    RTE*KGENAU
    RTE/TKDIVI
    ADDWT *
    Kindly go through the below link which is very useful. Hence closing the thread. Thanks for your valuable inputs.
    http://wiki.sdn.sap.com/wiki/display/sandbox/PCRmodificationincaseofHalfdayUnpaidLeave(LOP),IndiaPayroll
    Thanks & Regards,
    Rajesh Badita
    Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:05 AM
    Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:08 AM

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • After Upgradation BPF is not working for some users

    Hi All,
    We have recently upgraded from BPC 5.1 to 7MS SP7.  we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
    Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF  does not work for other users except for the first two people who first  used it. Other users have the same rights as the ones who can access the tasks.
    when they  click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does  not getting any thing.
    Any inputs ??

    Hi,
    Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
    If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
    Hope this will drive you to a potential solution.
    Best Regards,
    Patrick

Maybe you are looking for