Converting from LabView 4.0 to 9.0
I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
Attachments:
gj18i.llb 247 KB
Hey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1) for me! Thx
Attachments:
lgy1m.llb 73 KB
Similar Messages
-
Convert from LabVIEW 2011 to LabVIEW 9.0
Please convert from LabVIEW 2011 to LabVIEW 9.0
Attachments:
Watlow Vis.zip 76 KBLooks like somebody forgot to attach the zip file. Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Watflow.zip 57 KB -
Converting from LabView 4.0 to 8.5
I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?
Hi EKY,
converted to LV7.1 - should be ok now
But: there's a "missing dll"-error. You have to check this in LV8.5.
There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
TC081_LV71.LLB 29 KB -
Down convert from LabView 9.0 to 8.6
I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
Thank you.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel_LM6.vi 26 KBOnce again, saved in 8.0
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read_Value_From_Excel_LM6_nijams.vi 36 KB -
Convert from Labview 5.1 to labview8.6
Hello Everyone,
Can any one please convert this vi from labview 5.1 to labview 8.6 or labview 2009
Thanks in advance
Nadim
[email protected]
Attachments:
4-Channel Power Spectrum with estimate.vi 750 KBHi,
Here it is in LV 8 but there are some VI's missing (DAQ)
Kees
Attachments:
4-Channel Power Spectrum with estimate.vi 402 KB -
Please Convert from LabView 2013 to 2011
Hello, Could someone please convert these VIs from LV13 to 11 please?
Thanks,
Laura
Solved!
Go to Solution.
Attachments:
Syringe Pumps New.zip 953 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Syringe Pumps New.zip 364 KB -
Convert from LabVIEW 5 to LabVIEW 2014
hi,
I could not open VI. Could you convert this vi to LabVIEW 2014
Attachments:
mslumsrs.vi 432 KB
mslumsrs.vi 432 KBThat's okay. You can't.
The message about the duplicate post is some forum housekeeping to save people's time responding to this message in the event the other message is already answered. It just directs everyone to the first thread in case they stumble across this one first. -
I need a vi converted from LabVIEW 9.0 to 8.6 or 7.1
I have a few vis that need to be saved to an earlier version. These are in version 9.0 and I need them in 8.6 to open them. It would be better if I could get them in 7.1.
Solved!
Go to Solution.
Attachments:
Grab_continuously_new.vi 380 KB
Mikrotron.llb 337 KBI converted them into 8.6, I was missing a few dependancies (mvfgi5.dll) so I just ignored them.
Attachments:
Grab_Continuously_New_86.zip 390 KB -
Convert from LabView 6.1 to LabView 6.0
Can anyone kindly save this VI's in 6.0 version. I do not have LV 6.1 and these VI's are written in LV 6.1 version.
Thanks,
Kishor
[email protected]
Attachments:
High_Speed_Data_Logger.llb 154 KBIt appears to be one of the example programs provided and as far as I know, it's there in 6.0 (it's a lot older than that I believe). From the help menu, select Find Examples and then go to Hardware Input and Output>DAQ>Solutions. High Speed Data Reader and High Speed Data Logger should both be there.
-
Need to convert to labview 11 from labview 12
hello
I need to convert the following Labview 12 VIs to Labview 11.
thank you in advance
Attachments:
QAM Demodulation.vi 30 KB
QAM Modulation.vi 30 KB
rx QAM.vi 57 KBThe conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Please Convert tktds5xx from LabView 2012 to LabView 2011.
I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip 777 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip 529 KB -
Vi converted from LV2009 to 7.1
Hey guys,
I need 2 files converted from LabView 2009 to version 7.1. Can someone do it for me? Thanks a lot.
Cheers,
Andrey
Attachments:
initialization.vi 14 KB
final.vi 42 KBPlease post in the Downconvert Requests Thread. Thanks. That thread gets followed more closely, but be aware that your request may take a while to do since you are asking to go through several versions.
-
Downconver​t from Labview 8.0 to 7.1
Hi!
I need these files down-converted from Labview 8.0 to 7.1. Thanks in Advance!
Solved!
Go to Solution.
Attachments:
Fast_Scan_CV_8_0.zip 159 KBattached
Attachments:
Fast Scan CV 7.1.zip 149 KB -
I can't convert .vi from labview 5.0 to 8.6
I'm tring to convert a labview project from 5.0 version to 8.6 version. I know that direct conversion is not possible. I saw at this link:
http://zone.ni.com/devzone/cda/tut/p/id/8387
that conversion is possible by intermediate comnversion with 8.0 version (I have it).
Unlikely somethings wrong happen when I try to open my original labview 5.0 .vi with 8.0 version.
Do someone know alternative version to convert my project????
thanks in advance
A.
Attachments:
scrivemoo.vi 116 KBalbs wrote:
this is strange because I open it without problems with labview 5.0. I try to attach it again
thanks
There is still a problem with that VI. Are you sure it's written in LV 5. I get the error which is shown below. But PLEASE move this conversion to HERE
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012 -
Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011
Hello,
can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
Thank you very much for your support.
Solved!
Go to Solution.
Attachments:
TCPIP_Nagle_algorithm.zip 63 KBAdditionally I am sorry that I have put my post in LabVIEW and not under Version Conversion
Maybe you are looking for
-
JoltConnectionPool can not start in weblogic server
Hi I am trying to run the sample Tuxedo provided application which uses Servlets or Ejb. Now the Tuxedo Server has been configured and running properly. I have WebLogic Server installed and had created the JoltSessionPool with name "MAJoltConnectionP
-
How can video of interactive pdf show on Ipad?
Created an interactive pdf in InDesign with a video at the end, H.264 mp4 for Ipad size. THe video will show on the computer but will not show on the Ipad. Downloaded Adobe Reader 10.3 it can see it but will not play. Any ideas of how to get the vide
-
I'm currently working on an XL Photo Book using iPhoto 11. I know iPhoto says I can create a max of 100 pages. I wonder, is this 50 pages double sided or actually 100 pages double sided? Secondly, I read some older threads about image quality and OT
-
Hello ppl, I have 2 internal tables. I want to write a select query to select 2 fields from one internal table and 1 field from another internal table. These 3 fields will be selected in a third internal table. Fields to be selected: gt_mast-matnr
-
Which SP stack to install for EP 7 and BP XSS for ERP 2005
Hello, I installed portal EP 7 and ERP 2005 both SR2 I also installed the XSS BP in the portal Now I want to install sp-stacks but I have the following dilema which sp-stack do I install a) for ERP 2005 b) for the EP 7 c) for the XSS BP Please, advis