Converting from standard to advanced

Simple question (or so I thought it would have been a simple question before I decided to mess with Leopard Server).
If I convert a working standard configuration server to advanced to enable some additional features which can't be done in standard, will I break anything?
I'm running file sharing, iCal server, OD (by default), Web, VPN. All I really want to do is turn iCal SSL on so I can have folks use calendaring remotely, but that isn't an option on the standard config.
Thanks,
sid.

I believe that you should be fine to migrate to advanced.
BUT you can not go back to standard once you have migrated.
I would suggest backup all config, before doing the change and if possible clone your std config to a 2nd hdd. Do the upgrade and ensure all services work.
If you would like to go back to STD - rather insert cloned drive and boot off that.

Similar Messages

Audio lost when converting from standard to widescreen

I have been working on an iMovie project for about two weeks and just noticed that there was an option for widescreen vs standard mode. I read through the instructions and it said that one can convert to widescreen at any time in a project. I converted to widescreen and when I did I seem to have lost 2/3 of the audio in the clips. But its strange because the clips are clearly there - the ducking still works, the audio clip title are there, but there's no sound. I am hoping that there's a simply fix and that I don't need to reconstruction the movie. HELP! Please.
Thanks
David Trachtenberg, Berkeley, Californai

I resolved the issue. I googled the issue and the answer was right there. Turns out that one audio clip (out of dozens in the project) was somehow corrupted. A small yellow triangle was the indication. Once I deleted that clip all of the other audio came back into the project. I simply pasted a fresh version of that audio clip into the project and the all was not lost.

Converting from standard CC plan to Student CC plan

I am a current CC member (basic photography plan @ $10/month). My wife recently enrolled in college and needs the full CC membership (Illustrator). Do have to cancel and re-start or can they simply change my plan over to the student plan?

YOU can not change your plan at all... but SHE may start an Education subscription
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
When you buy an Education subscription, the terms you "click to agree" should be clear about the first/later years
-One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
Redemption Code https://creative.adobe.com/educard
ID Proof http://www.adobe.com/store/au_edu/academic_id.html

How to find out the date of license conversion (from Standard to Datacenter)?

I had problems with Microsoft licensing and i need to find out, when my servers was converted from Standard to be Datacenter ?
All my servers was standard, now it's Datacenter and i need to know from when it's Datacenter ???

What I really mean is that I have EA with Microsoft and I'm eligible for example 10 Standard and 5 Datacenter.
During Microsoft auditing they found that I have installed 10 Datacenter and 5 Standard, which is not original design, so obviously someone from my team converted 5 servers from Standard to Datacenter.
My question here that I need to know when exactly my servers where converted, so I can know who converted it as this mistake costs my company a lot!
I need to know time and data when my server was converted from Standard to Datacenter edition? May be it's recorded in registry or somewhere i can find using PowerShell or something, the same Idea of finding out Installation date using this command:
"([WMI]'').ConvertToDateTime((Get-WmiObjectWin32_OperatingSystem).InstallDate)"
Ah, that helps me understand, thanks.
If you installed Standard, and then used DISM /Online /Set-Edition.....
http://technet.microsoft.com/en-us/library/jj574204.aspx
this should be logged in the DISM logfile: %windir%\Logs\DISM
https://technet.microsoft.com/en-us/library/ee851579(v=ws.10).aspx
You may also find some details in the Windows event logs (if you still have that history available).
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I was informed i need to purchase standard 11 or standard 12 (?) in order to make word files converted from pdf editable. how do i do this?

i was informed i need to purchase standard 11 or standard 12 from adobe in order to make files converted from pdf to word using the recently bought and installed adobe pdf exporter file. how/where do i do this?

Currently the Acrobat version is "XI" (no "12").
With Acrobat XI installed:
"File - Save As Other" --- from here you pick the supported file format for the export.
If a PDF has content that is the output of a scanner then that output (as is the case for All scanners' output) is a picture of text and not real text.
During an export all that can be processed is the picture. As a picture of text is not text it is understandable why Word (or other word processors) cannot edit the content.
So, for such, prior to export run Acrobat's OCR and save.
The export will be of the OCR content.
Do expect to do clean of the text, spelling, punctuation, layout etc.
This may be minor. This may be major. But, there will be some.
Adobe as some online subscription services that can take a "proper" PDF (NOT all are eh) and export to supported file formats.
Two are "ExportPDF" and "PDF Pack".
Be well...

Is there a way to upgrade from standard configuration to workgroup...

...without rebuilding the server?

I actually meant can you upgrade the initial standard configuration that you choose at setup to the next option which is workgroup. The next choice after that is advanced. I did figure it out though. If you're in a standard config and you try and open server admin it asks you if you want to convert to the advanced config. There's apparently no way to upgrade from standard to workgroup.
Thanks for the tip about standalone server though!

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to delete records from standard maintenance view

Dear Sir/Madam,
        i want to delete records from standard view " v_mmim_rep_cust "
This is a standard maintenance view , used in MBLB report.
here i found the records with different report name but same fields as shown below...
REPORT             TABLE NAME     FIELD NAME
RM07DOCS         MKPF                 BKTXT
RM07DOCS         MKPF                 BLDAT
RM07DOCS         MKPF                 BUDAT
RM07DOCS         MSEG                 ANLN1
RM07DOCS         MSEG                 ANLN2
RM07DOCS         MSEG                 APLZL
YRM07DOCS         MKPF                 BKTXT
YRM07DOCS         MKPF                 BLDAT
YRM07DOCS         MKPF                 BUDAT
YRM07DOCS         MSEG                 ANLN1
YRM07DOCS         MSEG                 ANLN2
YRM07DOCS         MSEG                 APLZL
I WANT TO DELETE THE RECORDS FROM THE VIEW WITH REPORT = YRM07DOCS.
PLEASE HELP ME.
Thanks in Advance,
Dastagiri.

Dear Sir,
      when i did so , it displays a message that " entry mseg zeile must not be deleted ".
hense i went through writing a program to delete the records from table mmim_rep_cust
but it says that record not found.
program logic :
delete from mmim_rep_cust
    where report in report
      and TABNAME in TABNAME.
if sy-subrc = 0.
write ' RECORDS DELETED SUCCESSFULLY'.
else.
write ' RECORD NOT FOUND'.
endif.
please guide me to delete the records from the view.
Thanks in advance,
Dastagiri.

Calling a Web service from Standard OAF Page.

Hi All,
how to call a webservice page from Standard OAF Page and get back the response from that webservice.
Can anyone please give me the process how to do it.Can anyone please provide code it will helpful to me.
Not using any PL/SQL API's.only through web services how to do it?.
Thanks in Advance.
Regards,
Ajay.

look in the tutorial the web-client example or the dii interface example... and read all about jaxrpc ...
bye
J

How to preserve data when converting a Standard DSO into a Write Optimized

Hi,
I'm looking for proven strategies for preserving data when converting a standard DSO into a write optimized DSO. The data has to be dropped before the new DSO is transported into the environment.
1. The DSO is currently in synch with a cube,
2. The PSA does not have all the data which is in the DSO.
3. Data volume is incredibly high for a full reload from ECC, so we'd like to avoid that option.
Appreciate any help!

Hi Gregg,
have you considered just deleting the data? I know that sounds simple, but it might be a valid solution.
If the DSO is just receiving new data (e.g. FI documents), you can continue to deliver a logically correct delta to the cube.
Should that not be possible and you really want all data that you currently have in your DSO1 in the write optimized future of it, then how about this:
- Create a new DSO2 same structure as DSO1
- Load all data into that
- Delete all data from your DSO1 and import the transport to make it write optimized
- Load all data back into you now write optimized DSO1 from DSO2
The problem you have then, is that all data that you have already loaded into your cube is due to be delivered as a delta from DSO1 again.
Depending on your transformation / update rules that might or might not be a problem.
Best,
Ralf

Unable to switch screen mode from standard: PS CS5

Full screen with or without menus is grayed out in the view menu and the view dropdown selector from the menu bar. I have quit and re-entered PS and have reset all workspaces to default. I have checked that I'm working in 64 bit. I still cannot switch screen mode from standard. Last update was to 12.04. Last extension installed was photokit sharpener.
Thanks for any help. (PS, how do I reset preferences file on a mac?)
Cathy
Pertinent info:
Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
Operating System: Mac OS 10.6.7
System architecture: Intel CPU Family:6, Model:37, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 3200 MHz
Built-in memory: 4096 MB
Free memory: 2353 MB
Memory available to Photoshop: 3698 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-1.6.26
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5670 OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915203
Video Card Memory: 501 MB

Ahh, I knew it was probably something simple. No I didn't have a doc open since I was just working with prefs and trying to set desktop color. Banging my head now on my desk. Bam! So dumb ...
Thanks so much for solving my problem.

Convert from PSE10 to Lightroom - metadata concerns

After one too many frustrations with PSE, I've been looking for an alternative program. I don't care about editing - metadata (Organizer type features) are my focus. I looked at a few non-Adobe programs - a big problem with them is I can't import my PSE10 catalog, with 12,000 photos. On the PSE forum, the most common advice was to go to Lightroom, so I was holding out hope for that. However, I've played with the LR 5 trial for half a day now, and as far as I can tell, it doesn't make good use of the PSE catalog either! This is very disappointing for me, but I'm wondering if some of you folks can show me things I'm missing.
I'm looking into to converting from PSE10 to LR 5 on a Windows 7 machine. I have about 12,000, half TIFs from scanned images and half JPGs from digital cameras. As I said, I only care about metadata management. My focus is genealogy, so getting the original dates of scanned pictures captured is very important, and these often are only roughly known.
My main issue is that it seems to me that LR is taking the metadata from the photo files, not the catalog. I used the LR feature "Upgrade Photoshop Elements Catalog". The reason I say this is for two reasons:
(1) When PSE10 writes tags to files, it adds to any tags that are already there. So although PSE10 shows only the updated set of tags in the GUI, the photo files have both old and new tags. After doing the LR Upgrade PSE Catalog, I'm seeing old and new tags. It appears to be ignoring what is in the catalog and looking at the file. (As far as I know, the old tags are not present in the PSE catalog anymore, so it can't be looking at the converted catalog.)
(2) PSE10 allow you to tag photos with incomplete dates (e.g. no time, no day and/or no month). But if PSE10 has an incomplete date, it won't write it to the file (very annoying for working with historical photos). But LR does not show these partial dates, it only shows complete dates. In this case, I'm not sure if LR is showing the metadata in the photo files, or if it dropped the PSE10 catalog date info during the "Upgrade".
So my main question is, am I missing something with regards to the import, or am I correct in my impression that this "Upgrade PSE Catalog" isn't doing much of anything? (ExifTool shows all the metadata in the photo files -- much more complete than LR for that matter -- so what am I gaining by importing the PSE catalog into LR?)
A couple other miscellaneous questions if I may:
-- In PSE10, there is a notes field in the metadata, which goes into XMP-album in the photo files. Does LR not support this? As far as I can tell, LR supports only a few XMP namespaces, with no support for others.
-- In LR in the Folder pane, I have no scroll bar, so I can only see the first few entries. This seems to be a serious bug to me. Or am I missing something?
-- It appears in LR that one cannot show your entire catalog in the main pane sorted by folder then by file name. Is this correct? (This also seems to be a major drawback to me!)
-- When I try to change the date of a photo (Edit Capture Time in LR), it forces you to enter a complete date/time, unlike PSE10. Overall, it is much easier to manage these dates in PSE, it seems. Does LR handle incomplete dates to any level?
-- When I did my PSE import/"Upgrade", it assigned the wrong file names to some of my photos (it used file names from other photos in the catalog). Is this a known issue?
I imagine I have a very unusual vantage point, but at this point it seems that PSE is far superior to LR! And I'm not happy with PSE10!! Anyways, thanks in advance for your input. Sorry about the long post - wasn't sure if I should divide it up or not.
Bill

This is a reply to the post from John R. Ellis...
You mentioned "Adobe has never bothered to fix...". Note that the last post by Michel B in this thread
http://www.elementsvillage.com/forums/showthread.php?t=78779&page=2
indicates that PSE11 can handle this.
You say "After importing.... I used ExifTool to append..." Did you do this file by file, or with a script? A Perl script? (The reason I ask is that I would have to learn Perl, so I would have to decide how much this means to me...)
Regarding your suggestion to use fake dates
"(e.g. "1970" => "1/1/1970 00:00:00")"
I've been aware of this since I read it in your psedbtool material a year or two ago, but I've resisted making such changes. When dealing with historical photos, you want the ambiguity. In fact, you'd like to use things like "About 1970" and such. I wish the photo metadata community would get on board with that.
Regarding your point about catalog conversion, for me it sounds like it would be just as good to import the photo files directly. (Better for me, I think, since converting the catalog seems to lose the folder hierarchy in the LR Folder view for some reason. However, if I'm going to import the photo files directly, then LR has no advantage for me over any other program that I can see. The ExifTool GUI utility does a much better job with the metadata in general - the key drawback for me being the fact that you have to type out the keywords each time you want to add one to photo. Looking at the ACDSee Pro trial, that appears to handle metadata better than any of the Adobe products - the critical drawback being that it uses its proprietary XMP namespaces, meaning interoperability issues. LR has drawbacks for me, such as not being able to sort by folder than filename in the main view pane and the lack of support for other XMP namespaces (and the Folder pane scrollbar thing). So at this point I'm in a state of depression. As far as I can tell, I only have a partial solution to my problems - upgrade from PSE10 to PSE11. Truly a depressing notion!!

Convert from timestamp to date in a table

Hi All,
I have a table in oracle 10g r2.
I want to convert from time-stamp to date in a column of my table.
The table contain 10 million records.Please help me out with the easiest way to proceed.
Thanks in advance
USR0072

Add a date column to the table
run an UPDATE statement to update the date column from the timestamp column
mark the timestamp column unused (or drop the column)

Convert from oracle to access

Dear all,
Is there any tool to convert from oracle to access?
Thanks for advance !
chara

I will describe two ways here.
1) By toad
Toad outputs the result in a grid. You can save it as csv file and then can import in access database.
2) By sql* plus spooling
SQL> set heading off
SQL> spool dept.txt
SQL> select 'Dept Number,Dept Name,Location' from dual
2 union all
3 select deptno||','||dname||','||loc from dept;
SQL> spool off
Now you got dept.txt as csv file. Import this file in access database.

Convert from dictionary to local managed?

Hi all,
Good day!
when we convert from dictionary to local managed is it dependant on CPU or no of extent?
Thanks in advance
Elina

How are you converting the tablespaces? 8 hours seems excessive if you are using dbms_space_admin.TABLESPACE_MIGRATE_TO_LOCAL , I have seen situations where creating new locally managed tablespaces and moving the objects accross takes a long time as the old extnets are deallocated from the UET$ table and added to FET$. in these cases the speed of an individual CPU core is the limiting factor as SMON handles the deallocation of extents.
If this is the case then migratig the tablespace to locally managed using dbms_space_admin then migrating to a new tablespace may be faster, if not then can you post what method you are uing to migrate and the version of the database
Chris

Converting from standard to advanced

Similar Messages

Maybe you are looking for