Converting from UTM meter to latitude,longitude in oracle

I am trying to write a procedure which takes in utm data and converts to latitude,longitude
mostly on the net i am getting some formulas for conversion with no proper explanation.
Can any of you suggest any previously written oracle procedure or other help.
UTM data is available in a column, i convert the data into lat,long and take the lat
from easting in deg,minustes,seconds and likewise longitude from northing.
there are some methods like using excel or in java, but i want to do it in Oracle.
Please help as i am looking for suggestions and help.

Hi,
you should ask in the SPATIAL forum. This is a spatial conversion and Oracle has functions for these. In the SPATIAL forum there are the experts (I'm not).
See Spatial
Herald ten Dam
http://htendam.wordpress.com

Similar Messages

Latitude/Longitude on Oracle Locator

Hi, I'm using Oracle Locator
I'm trying to select latitude and longitude through this query
SELECT t.X AS LATITUDE, t.Y AS LONGITUDE
FROM geo.cultura c,
TABLE(SDO_UTIL.GETVERTICES(c.geometry)) t;
but the numbers are coming from different 90 and -90
A example: X=343819,495658682 and Y=7382918,56758273
Is there a command to convert those numbers?
Thank you very much!

Hi,
SDO_UTIL.GETVERTICES returns the coordinates of the vertices of the geometry. If your coordinate system is other than geodetic coordinates then you need transformation.
For example
SELECT t.X AS LATITUDE, t.Y AS LONGITUDE
FROM spl_major_villages c,
TABLE(SDO_UTIL.GETVERTICES(SDO_CS.TRANSFORM(c.geom, 0.005, 8307))) t;
Sujnan

CONVERTING X,Y TO LATITUDE,LONGITUDE VICE VERSA

hi,
i need formula for converting x,y coordinates to latitude ,longitude and vice versa,
CAN ANYBODY HELP ME IN THIS?

There is no standard formula for such conversions, as converting from one coordinate system to another is often a complex mathematical formula. What you need to do is track down (via the internet) the mathematical formula you require for your conversion and then apply that formula as SQL or PL/SQL code. You can pretty much do any mathematics in Oracle code, but firstly you need to know the maths required (and so would we if you expect us to help you).

How convert degree to meter?

Hi
After plenty of time to seek, I haven't still found the way for convert degree to meter,
I would to compare the distance between two points on my map, it works and it shows me the distance in degree but it would be better to have the distance in meter
thanks
paco

yes it's about coordinate
it's the entrance I reade some cordinate with latitude et and longitude , but I would like distance a the end in meter

Mediator To Spring Error-Could not convert from java interface to interface

Hi,
I have a requirement to using a Spring component and my composite application would be File Read -> Mediator -> Spring Component -> File Write.
I have to read a file and using mediator map the same to the Spring input and write the Spring component output to a file.
I have created a Java interface ( Package Name - transformtospring , Interface Name - TransformInterface) and also created a Java Class ( TransformImpl ) which implements the Interface in this package. Saved all these artifacts in SCA-INF/src folder of the application.
My Spring Bean configuration file is as follows ( saved the file in the same folder as composite.xml )
<?xml version="1.0" encoding="windows-1252" ?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:util="http://www.springframework.org/schema/util"
xmlns:jee="http://www.springframework.org/schema/jee"
xmlns:lang="http://www.springframework.org/schema/lang"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:sca="http://xmlns.oracle.com/weblogic/weblogic-sca"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://www.springframework.org/schema/util http://www.springframework.org/schema/util/spring-util-2.5.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd http://www.springframework.org/schema/jee http://www.springframework.org/schema/jee/spring-jee-2.5.xsd http://www.springframework.org/schema/lang http://www.springframework.org/schema/lang/spring-lang-2.5.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd http://www.springframework.org/schema/tool http://www.springframework.org/schema/tool/spring-tool-2.5.xsd http://xmlns.oracle.com/weblogic/weblogic-sca META-INF/weblogic-sca.xsd">

<bean class="transformtospring.TransformImpl" name="TransformBean"/>
<sca:service name="TransformService" target="TransformBean"
type="transformtospring.TransformImpl"/>
</beans>
I have created a Spring Context which uses the above Spring Configuration. When i tried to map the mediator output to Spring , i'm getting an error shown below.
" Could not convert from java interface to interface type wsdl . Exception=java.lang.ClassNotFoundException transformtospring.TransformImpl "
Please do let me know where exactly i'm doing wrong.
Regards,
Sri.

Hi All,
I could able to work this one out now !!!
But i'm having an issue mapping the input to this service. The method signature for the service is as follows:
public byte[] processData(byte[] input) throws Throwable{
So the input for this Service is a byte array. Now i'm mapping the data from a File Input ( Read File - opaqueElement ) to this service directly ( using mediator ).
Now when i have looked into the message in the Enterprise Manager, following is the message structure from Read File input to the service.
<message>
<properties>
<property name="tracking.compositeInstanceId" value="10009"/>
<property name="tracking.ecid" value="bcd04297e25136e7:4869a9c:13316255efc:-8000-0000000000001f79"/>
<property name="tracking.conversationId" value="TJ9PCcbtu3S0DA0GuxsGx13RYUb1NxHNndfk2PC8ukk."/>
</properties>
<parts>
<part name="parameters">
<ns0:processCollaboration>
<arg0>PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz48bnMwOkFkZDJJbnB1dCAgeG1s bnM6eHNpPSdodHRwOi8vd3d3LnczLm9yZy8yMDAxL1hNTFNjaGVtYS1pbnN0YW5jZScgeG1sbnM6 bnMwPSd1ay5jby5qZHdpbGxpYW1zLkFkZDJJbnB1dCcgeHNpOnNjaGVtYUxvY2F0aW9uPSd1ay5j by5qZHdpbGxpYW1zLkFkZDJJbnB1dCByZXF1ZXN0LnhzZCcPG5zMDpudW0xPjEwPC9uczA6bnVt MT48bnMwOm51bTI+MTY8L25zMDpudW0yPjwvbnMwOkFkZDJJbnB1dD4=+</arg0>
</ns0:processCollaboration>
</part>
</parts>
</message>
and the corresponding response message ( No output ) back from the service is:
<message>
<properties>
<property name="tracking.compositeInstanceId" value="10009"/>
<property name="tracking.ecid" value="bcd04297e25136e7:4869a9c:13316255efc:-8000-0000000000001f79"/>
<property name="componentName" value="ProcessCollab"/>
<property name="tracking.conversationId" value="TJ9PCcbtu3S0DA0GuxsGx13RYUb1NxHNndfk2PC8ukk."/>
<property name="compositeDN" value="default/CollaborationToSpring!1.0*soa_a8da1da7-f98f-4935-8d20-da9e7bc003cc"/>
</properties>
<parts>
<part name="parameters">
<processCollaborationResponse>
<return/>
</processCollaborationResponse>
</part>
</parts>
</message>
I have included System.out statements in my Java class , but its not printing anything in the logs.
I'm under the impression that the underlying infrastructure ( mediator ) transparently encodes and decodes data from base64Binary to java byte array. So could anyone help me on this !!!
Regards,
Sri.

ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth

Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.

hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind.

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I convert from pdf to word? I see an option to do so, however, when I click on it, Ia box opens...

when I try to convert from pdf to word, a box opens and suggests I am to click on (select) the file I want to convert. It sounds all well but it does not work. I really really just want my files back in word, all of them, no matter, because after having to reinstall windows 7 (done by techs) and me having to re-download all my HP drivers, and tools, and other software, which I imagine included adobe reader, now I see some pdf files won't open. It says, "access denied" and boy that really makes me wantt o scream. I am the ONLY user, it is my notebook, I am the administrator so I can't figure out why some files open and some don't. I can't ascertain any difference.
I would be grateful for any help. This has become just too exhausting. After reinstalling sooooooooo much, then to have to go through this with what is a free application? I say I think not.
This should NEVER happen with any free application and boy there is NO help to be found. They blow you off the phone fast telling you it's a free application. Then why are you putting in this kind of stuff that it won't open? This is NOT a shared notebook, it's mine. I am the only user, personal use.
HP probook, if anyone needs that info.
Please, will someone help?
I would be so grateful.
thanks,
Gina

Gee, Pat, this is a real big help.
Nobody could possibly think anyone would ask for help without first trying to fix the issue oneself. Or maybe you do. I have opened the file and looked under security. I have changed it to owner-notebook (which is what the techs called me) and clicked accept but geepers it didn't work.
Maybe someone else has an idea.
Take Ownership of a File or Folder
The above should be a link. At least I copied and pasted the link. I did what was stated in there. It isn't like brain surgery. But it is not working. I ended up being able to open some pdf files after transferring them from one partition category to another. I wish it was that easy as you seem to think.
Thanks for the help. Have a great year.

How do you stop DNG Converter from embedding Adobe's ACR default settings instead of custom settings?

I notice that the new version of Adobe DNG Converter (8.6, and maybe earlier) appears to place Adobe's ACR defaults in the converted file. Thus, the converted files open up in Bridge with an indication that they already have settings made, and, hence, ACR does not apply the custom camera settings. One has to Clear Settings first in Bridge, then open in ACR.
This behavior is new, perhaps to 8.6. But it's presence defeats the purpose of having custom Camera Defaults.
Is there any way to prevent DNG Converter from installing settings?

ssprengel wrote:
What do you mean by “custom camera settings”? Do you mean you’ve changed the Camera Raw defaults for a particular camera and those aren’t being seen until you do a Reset? Or do you mean some sort of Nikon-settings that Adobe never looks at?
Also at what point in the workflow are you converting these files, just after copying them to your hard-disk and before touching them with any other Adobe software, or after they’ve been adjusted in Nikon software, or after they’ve been adjusted in Bridge/ACR, initially as NEFs?
I mean my custom camera defaults that are set by the Save New Camera Defaults for a given camera.
My workflow is to take my original raw files first into Adobe DNG Converter. I then open the folder in Bridge. At this point I notice that my original raw files remain unaltered (there is no "settings" icon in the top right corner – circle with two lines and up-arrows – in the image's thumbnail), but the converted dng's (otherwise untouched and unopened in ACR) have a "settings" icon. When I open the original raw file in ACR, it opens using my custom camera defaults. When I open the otherwise virgin dng in ACR, it opens using the Adobe defaults (the same defaults that would be employed if no custom camera default had been set).
This behavior is new. DNGs formed by earlier versions of the DNG Converter did not apply any settings to the converted file, and when they opened in Bridge, they were given the custom camera settings.
In order to retain the old (and proper) behavior, I now have to take the just-converted documents into Bridge, select them, and immediately apply Develop Settings/Clear Settings. That gets rid of the settings that have been installed by the DNG Converter (as well as the "settings" icon on the thumbnail).
I notice there is a new feature in Adobe DNG Converter 8.6, namely, a panel-specific toggle between the settings and the default settings. This indicates to me the likelihood that Adobe has been making some alterations with the settings that is having unintended consequences. It clearly is not proper for DNG Converter to be adding (installing) settings, because that prevents the custom camera default settings from being applied, and hence defeats the purpose of the custom camera default settings.

Applescript to convert from AW6 spreadsheets to Excel

I have an iMac (iMac12,2) running OS 10.9.1 with applications of Pages’09 (4.3), Pages (5.0.1), Numbers’09 (2.3) and Numbers (3.0.1) available.
One of my laptops is a MBA (MacBookAir1,1) that I have kept at 10.6.8 with applications Appleworks (6.2.2) and Appleworks (6.6.9) available.
Recently, I converted many CWWP documents from AW6 into Pages. This was done on the iMac with an Applescript that copied a file (AnyDocumentCWWP) to the desktop as a file named AWV6, opened AWV6 with Pages’09, saved the result as AWV6.Pages, applied the creation date and modify dates of the original to AWV6.Pages, moved the new AWV6.Pages to the original directory and moved the original file to the trash, renamed AWV6.Pages to the original filename (excluding extension). The Pages version of the original document does not preserve the formatting of the CWWP, but the content was now discoverable with Spotlight. Since I was primarily concerned with the content, I would consider the conversion effort successful enough.
I performed the same sort of process on the iMac with CWSS documents converting from AW6 into Numbers. Here the results were less successful. I discovered that many of the converted spreadsheets had cells where the cell contained the last calculated value in substitute for the formula originally present -or- Numbers was unable to open the CWSS spreadsheet due to size limitations. Neither problem occurs when the file is converted on the MBA by Appleworks into an Excel format. For those CWSS files that did not properly convert to Numbers, I would like to perform a conversion to Excel.
When a given spreadsheet is manually opened on the MBA with either version of Appleworks, one can “Save as” using several formats of Excel. That operation will preserve the formula which cannot be recognized in Numbers’09. An example of this issue is when a spreadsheet has a cell that contains a formula with the function “ISNUMBER”. When I manually open a CWSS in Appleworks (either 6.2 version), I can Save As Excel Win 97 … or Excel Mac 98 … creating an XLS file that preserves the formula.
I have attempted two techniques with Applescript to be able to convert my CWSS documents into XLS format. Neither seem to work.
The first technique is very similar to a few lines extracted from a canned script found on http://macscripter.net/viewtopic.php?id=8296 the relevant code is:
set theSprTranslator to "Excel Win 97, 2000, XP 2002 spr"
tell application "System Events" to set mfpath to get path of disk item ("~/desktop/" as string)
set newfile to (mfpath & "AWV6" as string)
set NewFilename to AWV6XLS
tell application "AppleWorks 6"
    activate
    open newFile -- alias reference is ok
    save using translator theSprTranslator with NewFilename and replace
    close front document without saving
end tell
When this did not work, I attempted a scripted GUI solution as a second option. The GUI code I had found at http://stackoverflow.com/questions/17348326/applescript-to-save-an-appleworks-do cument-wont-compile-end-tell-vs-end-easy is:
tell application "System Events"
         tell process "AppleWorks"
                 click menu item "Save As…" of menu "File" of menu bar 1
                 click menu button "File Format" of window "Save : AppleWorks 6"
                 click menu item "Excel Mac 5 spreadsheet" of menu 1 of menu button "File Format" of window "Save : AppleWorks 6"
                 keystroke return
         end tell
end tell
Unfortunately there is no “File Format” menu button, after a bit of further research, I discovered UI Browser and wrote my own Applescript equivalent:
set mytempwork1 to AWV6
set theSprTranslator to “Excel Win 97, 2000, XP 2002 spr”
tell application "Finder" to open file (mytempwork1 as string) of the desktop
tell application "System Events"
    tell process "AppleWorks"
        click menu item "Save As…" of menu "File" of menu bar 1
        tell text field 1 of window "Save : AppleWorks 6"
            set value to "XX" & mytempwork1
        end tell
        click pop up button 1 of group 1 of window "Save : AppleWorks 6"
        click menu item theSprTranslator
        —click radio button 2 of group 1 of window "Save : AppleWorks 6"
        —delay 3
        —click radio button 1 of group 1 of window "Save : AppleWorks 6"
    end tell
end tell
tell application "System Events"
    tell process "AppleWorks"
        delay 10 — <<<<<IF YOU CLICK ON THE BUTTON WHILE IN THIS DELAY, THE SCRIPT WILL BEHAVE PROPERLY
        click button "Save" of window "Save : AppleWorks 6"
        delay 1
    end tell
end tell
This GUI script behaves almost as I would like. It seems to ignore the setting of the “pop up button 1” unless I actually intervene while the script is running and I click on the button. When I do so, the script runs as intended.
Is there a way to force Appleworks to recognize the Applescripted value of the “clicked” menu item?

Hello
As far as I know, there's no need to resort to GUI scripting. The problem in exporting in AppleScript is that AppleWorks 6 only accepts typeChar (TEXT) data as translator name while AppleScript string has become always being represented as typeUnicodeText (utxt) since OS X 10.5. This makes passing translator name to save command difficult but there's a workaround method as shown in the sample code below. The |TEXT|() handler does the job. Tested with AppleWorks 6.2.4 under 10.6.8.
main()
on main()
    set export_translator to "Excel Mac 98, 2001 spreadsheet"
        "Excel Mac 5 spreadsheet"
        "Excel Mac 98, 2001 spreadsheet"
        "Excel Win 5 spreadsheet"
        "Excel Win 97, 2000, XP 2002 spr"
    set export_translator_TEXT to my |TEXT|(export_translator)
    set src to (path to desktop)'s POSIX path & "in.cwk"
    set dst to (path to desktop)'s POSIX path & "out.xls"
    set srca to src as POSIX file as alias
    set dsta to touch(dst) as POSIX file as alias
    tell application "AppleWorks 6"
        --return export translators
        open srca
        tell document 1
            if document kind = spreadsheet document then
                save in dsta using translator export_translator_TEXT
            end if
            close saving no
        end tell
    end tell
end main
on touch(f)
    do shell script "touch " & f's quoted form
    return f
end touch
on |TEXT|(u)
        string u : source text
        return data : «data TEXT...» representing u converted to MACROMAN encoding
    do shell script "u=" & u's quoted form & "; printf '%s' \"$u\" | iconv -f UTF-8 -t MACROMAN | xxd -p"
    run (run script "
script
    «data TEXT" & result & "»
end script")
end |TEXT|
Hope this helps,
H

How do I convert from PAL to NTSC in compressor?

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

To convert the 25fps PAL file to a 29.97fps file staying within the ProRes codec:
• Open up compressor. In the Settings window select: Apple>Formats>Quicktime>ProRes 422
• Select the "Duplicate Selected Setting" icon in the upper left of the Settings window
• This creates duplicate of the preset that you can edit
• Select the preset copy and, in Inspector, give it a new name (something like ProRes PAL>NTSC)
• In Encoder>Video Settings>Frame rate - and change the frame rate to 29.97
• In Frame Controls> turn them on and set Resize Filter and Rate Conversion to BETTER. (If so set them to BEST, be prepared for a long wait)
• In the Geometry tab, set the Frame Size to 720x480 (you don't say if the file is 16:9 or 4:3)
• Submit the file and go have dinner. Depending on the length of the file, it may take hours.
Have fun.
x

Converting from a Business View connection to a non-Business View Error

I have CR 2008 report with SP1. The report has a sub report. The main report is based off of a BV but the sub report is using an ODBC connection. When I try to update the ODBC connection I recieve an error message telling me that:
Quote:
"Converting from a Business View connection to a non-Business View connection is not supported."
I am do not want to update the BusinessView just the ODBC connection for the subreport.

Hi Michael,
When you try to update both the Business views and ODBC connection you will be prompted for those errors.
You need to break the link in the report and update the connections individually.
Thanks,
Naveen.

Converting from a Business View connection to a non-Business View connectio

I have a report on our Crystal Reports Server that I need to move to a machine with Crystal Reports XI installed and no connection to the Business Objects Server.
When I create an ODBC connection pointing to the same table and then try to use Set Datasource Location to Update the Data Source I get an errormessage:
Converting from a Business View connection to a non-Business View connection is not supported.
What can I do? It is a complex report that I don't want to take the time and energy to rewrite.
Thank You for any answers.
<a href="http://farm4.static.flickr.com/3234/2942702182_72365cc04f_o.jpg">Screen Shot</a>

Hello Brundibar,
I recommend to post this query to the [Universe Designer and Business Views Designer|Semantic Layer; forum.
This forum is dedicated to topics related to the universes and business views.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Universe Designer and Business Views Designer queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Load failed due to Overflow converting from 853156+16

Hi All,
Load is getting failed from one DSO to another DSO with following error message. and its AP AR load
Runtime error while executing rule -> see long text
Message no. RSTRAN301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from '8.85315e+16'
The error was triggered at the following point in the program:
Z_BFOD_A_AR_LOOKUP_ITEM_E 278
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level node of
the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Thanks,
Asim

Hey,
Ask the developer that wrote the end routine to check the code where the error occurs. First check if too much data is transferred and if it can be reduced. Then also check if the object needs to be extended 460652 - Extending key figures in BW.
Regards,
Michael

DTP Request Error: "Overflow converting from ''" (Executing rule)

Hi,
I have an error for every dataset in my dtp:
Anyone an idea?
Error Ercords Display says:
Runtime error while executing rule
Longtext:
Diagnosis
     An error occurred while executing a transformati
     The exact error message is:
     Overflow converting from ''
     The error was triggered at the following point i
     GPD5DB2R35UPL1XXBS1ICKUVG8O 2313
System Response
     Processing the data record has been terminated.
Procedure
     The following additional information is included in the hig
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error

Hi,
It seems that there is a error in transformation routine. Are you filling any internal table or converting any data type in the routine. Go to ST22 it will show you dump and give you line at which error is coming OR if you click on the message in DTP monitor it will divert you to the errorneous line.
Regards,
Viren

Converting from UTM meter to latitude,longitude in oracle

Similar Messages

Maybe you are looking for