Converting HD NTSC to HD PAL

Hi!
I have a 5 minute video that was created in HD (1920X1080) and it is in NTSC (29.97fps) and I need to get it to the UK for their local use. Is there anyway that I can out put directly in FCP from NTSC to PAL or can I use Compressor to do it? If so how? If not what applications or process can I go about getting it converted?
Thank you.
Kelvin

your best bet is to take it to a facilities house that have dedicated standards conversion hardware
if you can't stretch to that then the Natress Standards Conversion plugins do an excellent job
if you have no budget at all then Compressor also does an excellent job if somewhat slowly
failing that then yes, you can export a PAL copy using Export > Quicktime Conversion (but it won't be particularly pretty)
i beleive the freeware JES Deinteracer also claims to do a good job of standards conversion ... i have no experience of using it for such, and do not know if it offers any advantage over the quicktime conversion method, but you may wish to try it

Similar Messages

How to convert my NTSC project to PAL?

Hi! I'd like know how i can convert my ntsc project into PAL.
I need finish a DVD for my client take to ANGOLA and there is PAL system.It is possible? My Encore is 2.0.
Or It is possible put my NTSC movie into PAL project and let encore transcode the movie? Thank you very much and sorry my english.

You have several options.
1 - Create a new PAL project in Premiere Pro. Capture your footage in the usual manner, and as soon as it is in the project, hit the ENTER key to render it.
2 - Create an NTSC project in Premiere Pro, capture to NTSC DV footage, and export it out again.
Close project.
Create new PAL project, import the NTSC clip & then interpret/conform the footage to the project settings.
3 - Set up an NTSC project, capture footage, export to PAL DV or MPEG-2 from Premiere.
4 - Use TMPGEnc Xpress 4 - it's standards conversion is very good.
5 - Use ProCoder, as Ruud suggests
6 - Use CCE SP if you have it.
I'd try as many different ways as you can, and view the lot to see what looks the best.

Can Compressor convert my NTSC video to PAL?

I am trying to convert my NTSC footage to PAL. I was given a tip that the key is in the compressing stage and then use Studio Pro and burn a PAL DVD. Is this correct?
Thanks so much!!!! it really helps!!!

i saw you on the other forum.., you got fobbed off to this one.., actually you can 'convert' to PAL in both DVD Pro and Compressor..,
if you can use either at all you already know it.., do you know where the settings are in compressor.., (is your compressor working??).., an you load settings and assign a sourse and a destination.., if you ca do those things you can already 'convert.'
what ever, assuming compressor is working on your puter, open compressor and save a project name (give the project a name.) now in the
hit 'add file' (the icon, top left)
go to the settings/destination window (the window that covers the bottom left of your screen)
click the triangle that says 'apple'
click the triangle that says 'DVD best quality 120 minutes (if thats how long you want it.., as long as your movie is under this time your OK)'
drag that setting to the long strip in the window above (top right), check the sourse so you know where the file is going.
look in the inspector window and click the icon, second from the right, this is your encoding settings.
click, video format; change the setting to PAL.., check the frame rate has changed to 25fps
back at the window, top right, you will see 'submit.'.., hit that and it will send the job to the render window.., watch the magic
the same can be done from the inspector in DVD pro.
if this was too confusing, sorry, .., there must be some tuts somewhere.., try 'larry jordons' web site, or maybe 'peachpit.com'..??
M:)

Final Cut Pro X how do you convert HD NTSC to SD PAL DVD

Aloha,
I have edited a video and wanting to export to PAL SD DVD. The video was shoot in NTSC HD and edited in the same format. When I select share / DVD I do not see the option to select export to PAL. I always export to SD DVD's but they default to NTSC so I never gave it much though until today....
Please advise and thanks!
Frederick

Aloha Tom,
Thanks for your feedback. I will give it a try and see if the clients have any problems playing the DVD. I have read a post that indicated PAL players can play NTSC DVD's, which is great!
I also wanted to be 100% sure that FCPX DOES NOT have the option to do this and you made it perfectly clear.
Thank you,
Frederick

Converting an NTSC DVD to PAL DVD

Does anybody have any idea how you'd go about changing
an NTSC DVD into a PAL DVD? It's not copyrighted, and
the conversion doesn't have to happen in DVDSP.
It can be done with Toast or other software.
I'd be interested in what you think is the easiest way?
Thanks.

Hi Brvideo
I had a similar query a couple of weeks ago.
The link is here..
http://discussions.info.apple.com/webx128@@.68ba3040
(Oct 02 2005). The advice from Houghts in this thread was bang on - it worked brilliantly.
Additionally as mentioned in the original query - the shareware mpeg2works is also supposed to be able to do this. I can't say one way or the other as I haven't used it but you'll see at the mpeg2works forum on their own website that in some cases it hasn't worked so well.
The QT DV/MpegStreamClip method certainly worked well for me and the quality was surprisingly good. Good Luck with it.

DV-NTSC Project to PAL DVD

Here is what I intend to do:
Create a copy of the project file project_pal.fcp
In project_pal.fcp change easy setting to DV-PAL
Export sequences to quicktime
Use compressor to convert to DVD ready files
Author DVD w/ DVDSP
My questions are:
Where in here to I need to change any additional setting to make the DVD PAL ready? Is there anything in compressor or DVDSP I need to change or will exporting from a PAL project get that done?
Thanks!

Converting from NTSC to PAL is not a trivial bit of transcoding. There are disparate frame rates as well as different frame sizes. You can't just drop in a NTSC file in a PAL timeline and get good results.
There are three good ways to do it.
1. Purchase and use Graeme Nattress's Standards Convert plug in to convert the NTSC timeline to PAL on export within FCP.
or
2. Use Compressor's Advanced features to convert the exported NTSC file to PAL.
or
3. Take the file to a post house that can do a hardware based standard conversion.
Once you have the file in a PAL format, author a PAL disk and burn it within DVDSP.
Of course, the disk should be region free.
x

Help - NTSC Anamorphic to PAL Anamorphic ...?

I have NTSC footage which I export with the settings below and which work fine.
My question is about PAL export. What settings do I used for PAL
in terms of frame rate, canvas size etc etc...?
Unfortunately I have no PAL monitor so can't test it. :s

You need to convert from NTSC standard to PAL.
The cheapest way is using Compressor, take a look at the article below:
http://www.macworld.com/article/49306/2006/02/marchcreate.html
However, a great solution is [Nattress|http://www.nattress.com/Products/standardsconversion/standardsconvers ion.htm]

Editing PAL wmv clip and converting to NTSC

I have a 50 min clip (given to me by a client) which was captured in PAL, edited, and compressed as .wmv file; the audio rate is 44.1KHz, square pixel ratio. I need to edit in FCP and convert to NTSC. I've tried rendering in FCP after it's imported, converting to NTSC before bringing it in (probably at the wrong settings), and changing the sequence settings.
I can view it fine in the viewer, but once I put it in the timeline, the sound is completely unsynched (probably the 44.1 thing), which is why I changed the sequence settings to 44.1.
I did find the macworld article from March '06 on how to successfully transfer to PAL using Compressor 2 and will use that. Here's the link for those who want it:
http://www.macworld.com/2006/02/secrets/marchcreate/index.php
Here's my question, do I first transfer the huge clip through flip4mac to make it a .mov, or do I put it through compressor? Or, do I edit it down to the 7 - 1 minute clips I actually need from the clip, export those using ???? and then do the other conversions?

Do you think the out of sync sound is due to the
44.1KHz as opposed to 48KHz?
No.
I did try changing the
sequence settings to 44.1 bringing the exact clips
in, and then rendering (which should convert from
.wmv), but it was still out of sync. Doing it that
way, should I make the sequence settings 44.1KHz but
leave it PAL until I later do the compressor
conversion?
I'd use flip4Mac to get the files to .mov's... then edit in PAL. Export the PAL sequence to compressor for the NTSC conversion.
I think once you get them to .mov's you're possibly home free with the sync problem. FCP just doesn't support wmv's... so that could be the sync problem.
Jerry

Converting ntsc dvd to pal for web

hi , i am based in uk and I have a dvd that apparently is ntsc as it plays in my dvd player and says ntsc region, it plays on the computer to.
I want to take small segments from it to convert to web format , add titles etc and upload to youtube.\
trouble is i cant rip the files to use in final cut pro, tried media streamclip but that produces jerky unusable files with random drop out and colours
I then thought play it realtime into fcp , it will play going by a firewire into capture and i see it but when capturing it stops every few seconds saying there is dropout I unchecked report on droped frames, and abourt on dropout. and capturing without deck control. i then tried to go through my dv camera but that doesnt see the picture only the sound.
I thought I could copy the dvd but it wont work either on my dvd recorder or with toast.
any suggestions how I can do this? does it need converting first if so how?
I am only using a few minutes of at least 90 minutes of footage .
thankyou
ade

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

NEWBIE- CONVERTING NTSC PROJECT TO PAL USING COMPRESSOR (?)

Hi all- thanks for any help you can offer.
I am taking a project(instructional dvd) with six chapters that I have completed in NTSC. I was told that if I want to now go to PAL, that I could go back to final cut pro 5, make quicktime movies of each chapter then put them in compressor with pal settings and make mpeg2's out of them. Then I create a new dvd studio pro project in pal and go from there. When I did that (IS that the way to go?) it seemed as if compressor took waaaay too little time to compress the chapter. Just looking for some advice on the most sure fire way (short of importing and re-editing all my clips in final cut) to convert my ntsc quicktime movies to a pal format that I can use to make a pal dvd.
Thanks so much
suz6
g5 quad Mac OS X (10.4.9) final cut studio fcp 5/ pro dvd studio pro 4

Hi:
Read this recent post in Compressor forum:
http://discussions.apple.com/thread.jspa?threadID=1015451&tstart=0
Hope that helps !
Alberto

Converting NTSC footage to PAL with compressor 4

Hello, Please can some angel help.
I have PAL and NTSC footage. I want the end output to be PAL.
I have compressor 4. What settings, step by step do I select to change the NTSC footage to PAL.
There is info. on the web all relating to old versions of compresor where there seems to have existing a helpful NTSC/DVD setting where compressor made it clear the setting you needed. This is not an option on Compressor 4 so I am hitting a brick wall.
I would greatly appreciate some advice here.
Thank you
Nicola

What formats are your source files? What format (aside from PAL standard) do you want your output file (s) to be?
Russ

NTSC vs. PAL: asset question

Hoping this will be a trivial question for someone, since my DSP 4 documentation doesn't seem to have much to say about it...
I'm planning to produce a series of DVDs whose content will consist of a large number of video assets (2000+). Currently, these assets are in NTSC MPEG-2 format, with corresponding audio assets in either AC3 or AIFF. My question is: what do I need to do in order to produce a complimentary series of PAL DVDs with this content, given that DSP doesn't appear capable of importing NTSC video assets into PAL projects directly?
Now that I'm on an Intel-based machine, I've sent in my upgrade fee for the latest version of Final Cut Studio (which of course includes DSP), so I'll have that at my disposal. Does this software provide a batch-friendly means for me to do what I'm attempting, or do I need additional tools?
TIA for any advice.
PowerBook G4 Mac OS X (10.4.8)

You will need to convert NTSC assets to PAL assets to do it properly (including menus). Compressor does conversion and there is also other software, such as www.Nattress.com, which does conversion.
The quickest (but may not be best) is to run the assets in bulk through Compressor (but this will also depend on whether you have the Final Cut files still).
2,000 video files is daunting, so try to stay as organized as possible
Also as an aside, more people who use PAL (ex-U.S.) have the ability to play NTSC as compared to the U.S. which is more NTSC centric, so you may want to keep that in mind depending on the project, the audience and whether you will need a PAL version.

HD NTSC to Anamorphic PAL question

I have compressed a 1280 x 720 HD NTSC sequence into an H264. Now I'm converting it to PAL through Compressor. And to try and maintain the 16.9 Ratio I'm trying the Settings : HD NTSC to Anamorphic PAL. But I don't know if it will come out "Squezed" and if in Europe they have TVs that "unsqueeze" the image? I don't know either how a 16.9 image looks in 4,3 in case I have to redo the conversion? Does anybody have any experience or knowledge in this, and could help me?
Thank you very much.

Thank you Nick, I hear you. Unfortunately I'm up against 2 obstacles: time and money. This is a (very) limited budget operation, and I can only send up to 2 Gb via YouSendit to several places in Europe, instead of a DVD via Fedex. But I will follow your advice of redoing the conversion to PAL at the source of 1280 x 720, and then compress the resultin PAL via H264 ( ProRes 422, which I tried, was too big) to end with a less that 2Gb file hopefully.

URGENT -NTSC DVD to PAL DVD

Dear Friends
I have a specific question regarding the creation of a
PAL DVD. I am using DVD STudio Pro 1.5 and my editing program is Final Cut 3.0.
Do I need to recreate my (NTSC) video in Final Cut Pro for PAL?
Or can I change it to PAL in DVD Studio Pro?
The reason that I 'm asking is that sometimes my DVDs don't play overseas. This has happened to
me in France as well as Wales.
Thanks so much.
Mary

Hi Mary,
If you need DVD's that ALWAYS play you need to convert your source material to PAL. You also need to create menu's etc. that are the correct size.
However if you just need 80% or 90% compatibility ALL standalone PAL DVD players will play NTSC discs (region coding aside). They output a signal with PAL color space and NTSC frame rate and resolution. Most PAL TV's manufactured since about mid 1990 can play that signal.
Mitch

NTSC destined for PAL.. Best workflow

Hi Gurus,
My guy shot in NTSC DV on a Z1 accidently (I'm in Australia).. the resulting DVD will have to be in PAL..
Is it best to do all the editing in NTSC and then convert the finished movie to PAL via compressor, and then author a PAL DVD..?
or.. Is it best (as I am tempted) to capture the whole (short) tape and and send convert it to PAL and then reimport that into a PAL project.. I'd prefer this as I'm going to be doing more work for this client in the future, and I would prefer all future projects to be done in PAL (including the shooting!!)
or is there another option?.. I mean I could just drop the NTSC asset in a PAL sequence, but would that be as high a quality?
Thanks in advance..
Pete

Just a quick question that is on topic of this thread hope that is ok? What were the results like when using compressor to do the NTSC to PAL conversion. We have used Nattress in the past with OK results but not great, movement can look jerky. (Source Digibeta)
Didn''t realise compressor had the conversion capability. Love to hear how you got on.

Converting HD NTSC to HD PAL

Similar Messages

Maybe you are looking for