Converting hex to dec
Hi everybody,
I want to join this two numbers and convert them from hex to dec. I have tried using joint and conversion but I still couldn't work it. In the following screen shot I took it suppose to be 3E8 in hex which equals to 1000 in dec. I need suggestion from you how to approach this.
Thanks
Solved!
Go to Solution.
SOBGA wrote:
As I was reading all the answers about converting Hex to Dec,I found out that many of you are making it so complicated.To make it easier for a learner or beginner,this is what it takes:
Open a blank VI
Click on numeric control
Right click on the same numeric control
Scroll down to "Representation"
Click on "U8"
Go to numeric indicator and repeat step 4 and 5
Then right click again on numeric control
Scroll down to "Properties" and click
Click on "Data entry",if necessary,change the minimum and maximum
Pass to "Display format"
Click on "Hexadecimal" then you are done.The rest is to go on the block diagram to wire the numeric control to the numeric indicator and it works.
You can do the same process reverse for dec to hex.But you must know that what we did for "numeric control" on (Hex to Dec) will be done to "numeric indicator" on (Dec to Hex).This same process can apply to octal and binary without the use of complicated array,string while loop and so on...
I'm a beginner in Labview and I understand that you need to explain more to understand better.
If you really read all of the comments, you would see that Altenbach already stated this (saying it is just a cosmetic property for the indicator).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Hi,
Can some one let me know how to Convert Hex to Dec in Numbers.
When ever I type Hex 00E0 it will appear in the cell like this 0.00E+00 ,who do i fix this.
Thanks
Ashan-+-+-+-+-+-+-+-
Entering the Help and Terms of Use area you will read:
*What is Apple Discussions and how can it help me?*
Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages_.
I have a question or issue—how do I search for answers? _ It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.
-+-+-+-+-+-+-+-
Taking care of that, you would already know the response.
Using the really cumbersome keystring "convert AND hex" as described in the forum's help returns two entries.
One is you question.
The other is: http://discussions.apple.com/thread.jspa?messageID=7242325
which gives a link to:
http://discussions.apple.com/thread.jspa?messageID=7078123
Yvan KOENIG (from FRANCE jeudi 24 juillet 2008 09:19:34) -
Java code to convert - Hex to Dec
I'ld like to convert an Integer or a String from hexadecimal format to a decimal format;
For example: 30 give 0; 50 give P and so on.
Can any one help me sending to me a java code that do it please?
Thanx a lotThis doesn't convert hex to decimal, but it does convert hex to the character representation, which is what it sounds like you want. At any rate, given "30" it will print "0" and given "50" it will print "P". Also, given "P" it will print "is invalid".
try
int in = Integer.parseInt(s, 16);
Character ch = new Character((char)in); // should validate range here
System.out.println("In: " + s + ", out: " + ch);
catch (NumberFormatException e)
System.out.println("In: " + s + " is invalid.");
} -
Packages that convert hex to dec
hi,
i have a table posicional which has large object on it..the column grarep(graphical representation) and attr_posn contains hexadecimal value of coordinates that is used in automated mapping
SQL>DESCRIBE POSICIONAL;
Name Null Type
class_id NUMBER(10)
class_memb NUMBER(10)
codigo NUMBER(10)
simbolo NUMBER(10)
xmin NUMBER(10)
ymin NUMBER(10)
xmax NUMBER(10)
grarep BLOB
attr_posn BLOB
usuario VARCHAR2(30)
fecha DATE
texto VARCHAR2(50)
--Once i query grarep and attr_posn
SQL>SELECT grarep from posicional;
Column or attribute type cannot be displayed by SQL
--I made a function blobtochar to be able to view the data on grarep and attr_posn
CREATE OR REPLACE FUNCTION Blobtochar (field_name IN BLOB)
RETURN VARCHAR2 IS
OutputStr VARCHAR2(32767);
-- OutputStr LONG;
AmtToRead NUMBER:=4000;
Position NUMBER:=1;
LENGTH NUMBER;
BEGIN
LENGTH := DBMS_LOB.GETLENGTH(field_name);
LOOP
OutputStr := OutputStr || DBMS_LOB.SUBSTR(field_name, AmtToRead, Position);
Position := Position + AmtToRead;
LENGTH := LENGTH - 4000;
EXIT WHEN LENGTH < 4000;
END LOOP;
RETURN OutputStr;
END Blobtochar;
SQL>SELECT blobtochar(grarep) from posicional
--now i can view the data in grarep..
--for example
SQL>SELECT class_memb, blobtochar(grarep) FROM posicional WHERE class_memb=111025648;
blobtochar(grarep)
00000001000000010000000606D4E833074B69EC06D4E91F074CO18406D50C58074C031E
HERES MY QUESTION,
1.how can i convert this hexadecimal coordinates so that when i query, a decimal value will appear instead of hex. this hex values are the lines in the map.heres the info about the hex value above. we need to parse or cut the hex into 8..
00000001
00000001
00000006 ==>number of coordinates(ranging from 1-F, this example means 6)
06D4E833 ==> X1
074B69EC ==> Y1
06D4E91F ==> X2
074CO184 ==> Y2
06D50C58 ==> X3
074C031E ==> Y3
connecting 4 coordinates/2points/ will make 1 line
connecting 6 coordinates/3points/ will make 2 lines
connecting 8 coordinates/4points/ will make 3 lines
connecting 10 coordinates/5points/ will make 4lines
connecting 12 coordinates/6points/ will make 5lines
connecting 14 coordinates/7points/ will make 6lines
and so on..
In the example above there are 6 coordinates
point(X1Y1), point(X2Y2), and point(X3Y3). Connecting all 3 points will make 2 lines). computing the total length by phytagorean therorem
LINE1 length=square root of X2-X1 squared + Y2-Y1 squared
LINE2 length=square root of X3-X2 squared + Y3-Y2 squared
total length = LINE1 + LINE2
how can i implement this so that when i query specific grarep and attr_posn, a computed total length in decimal value will appear instead of hex..thanksYou might enjoy reading the SQL Reference manual. Chapter 2 deals with datatypes and numeric format models - for 9i the reference you need is http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/sql_elements4a.htm#34512
-
Convert Access Module to SQL Function - Hex To Dec conversion
I need to convert an Access Module to a SQL Function but not sure how to successfully accomplish this.
The module has several different functions to convert hexadecimal numbers to decimal and vice versa. I am not sure if I needed to break out each module function into a seperate function in SQL or not. Any help would be appreciated.
Here is the actual module that needs to be converted:
Public Function MEID_DecToHex(mMEIDDec As String) As String
'Dim mMEIDDec As String
Dim mManNum As Double
Dim mSerialNum As Double
Dim mMEIDHex As String
Dim mManHex As String
Dim mSerialHex As String
'mMEIDDec = "268435457304109828"
'*** Check MEID digits, make sure it is 18 digits else return invalid
If Len(mMEIDDec) = 18 Then
'*** 18 digit decimal code: 1st 10 digits is for the Manufacturer and last 8 digits is for the Serial Number
mManNum = Left(mMEIDDec, 10)
mSerialNum = Right(mMEIDDec, 8)
'*** Convert MEID Dec to Hex
mManHex = DecToHex(mManNum)
mManHex = fntPad(mManHex, "0", 8)
mSerialHex = DecToHex(mSerialNum)
mSerialHex = fntPad(mSerialHex, "0", 6)
MEID_DecToHex = mManHex & mSerialHex
ElseIf Len(mMEIDDec) = 11 Then
'*** 11 digit decimal code: 1st 3 digits is for the Manufacturer and last 8 digits is for the Serial Number
mManNum = Left(mMEIDDec, 3)
mSerialNum = Right(mMEIDDec, 8)
'*** Convert MEID Dec to Hex
mManHex = DecToHex(mManNum)
mManHex = fntPad(mManHex, "0", 2)
mSerialHex = DecToHex(mSerialNum)
mSerialHex = fntPad(mSerialHex, "0", 6)
MEID_DecToHex = mManHex & mSerialHex
Else
MEID_DecToHex = "Invalid"
End If
End Function
Public Function MEID_HexToDec(mMEIDHex As String) As String
'Dim mMEIDDec As String
Dim mManNum As String
Dim mSerialNum As String
'Dim mMEIDHex As String
Dim mManDec As String
Dim mSerialDec As String
'mMEIDHex = "a000001937b27a"
' Remove any spaces befor or after the string
mMEIDHex = Trim(mMEIDHex)
'*** Check MEID digits, make sure it is 14 digits else return invalid
If Len(mMEIDHex) = 14 Then
'*** 14 hexadecimal digits: 1st 8 digits is for the Manufacturer and last 6 digits is for the Serial Number
mManNum = Left(mMEIDHex, 8)
mSerialNum = Right(mMEIDHex, 6)
'*** Convert MEID Hex to Dec
mManDec = HexToDec(mManNum)
mManDec = fntPad(mManDec, "0", 10)
mSerialDec = HexToDec(mSerialNum)
mSerialDec = fntPad(mSerialDec, "0", 8)
MEID_HexToDec = mManDec & mSerialDec
ElseIf Len(mMEIDHex) = 8 Then
'*** 8 digit Hex code: 1st 2 digits is for the Manufacturer and last 6 digits is for the Serial Number
mManNum = Left(mMEIDHex, 2)
mSerialNum = Right(mMEIDHex, 6)
'*** Convert MEID Dec to Hex
mManDec = HexToDec(mManNum)
mManDec = fntPad(mManDec, "0", 3)
mSerialDec = HexToDec(mSerialNum)
mSerialDec = fntPad(mSerialDec, "0", 8)
MEID_HexToDec = mManDec & mSerialDec
Else
MEID_HexToDec = "Invalid"
End If
End FunctionTry link
you can create & use CLR function
or you can simply convert on fly refer below link
http://blog.sqlauthority.com/2010/02/01/sql-server-question-how-to-convert-hex-to-decimal/
http://blog.sqlauthority.com/2012/07/26/sql-server-answer-how-to-convert-hex-to-decimal-or-int/
decimal to hex
http://stackoverflow.com/questions/13643729/decimal-to-hex-conversion-in-sql-server-2008 -
Dear all ,
I have to convert char to dec , my requirement is to covert 12344434 to 123444.34 .
note i don't want 12344434 to 12344434.00 .
Thanks in advance
DebeshYou can try like this.
DATA : v_tot_len TYPE i,
v_off_len TYPE i.
DATA : v_off_text(50) TYPE c,
v_dec_text(2) TYPE c,
v_fin_text(50) TYPE c.
PARAMETERS : p_input TYPE text20 OBLIGATORY.
START-OF-SELECTION.
v_tot_len = STRLEN( p_input ).
v_off_len = v_tot_len - 2.
v_off_text = p_input+0(v_off_len).
v_dec_text = p_input+v_off_len(2).
CONCATENATE v_off_text v_dec_text INTO v_fin_text SEPARATED BY '.'.
Here I am inputting the text to be converted. -
Converting from a DEC protocol to Intel protocol
How to do convert from a DEC Double precision floating point to Intel Double precision floating point or any designated number in the DEC protocol to Intel protocol.
Hi Tbone,
For the most part, including the term "DEC" on this exchange is effective in limiting the number of responses you will get.
Conversion of number types between different platforms can usaually be handled by byte swaps, word swaps and type casting depending what you are coming from and what platform you are running on.
If you need additional help, please indicate what data you have and what it should equal and the contributors here can help you figure out the details.
Ben
BTW: What kind of DEC ie 8, 10, 11, 20, VAX, Alpha, Rainbow?
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Converting Hex to Integer Value
I'm trying to convert hex code to the corresponding integer, which can then be used to display a character.
For example I have the code.
int i = 0xE7;
System.out.println(i);
System.out.write(i)This produces the output as expected with the first output outputting 231, and the second line outputting the corresponding character.
My problem comes when trying to make it so the hex code is variable.
For example, I receive an output of 7
This output is then the last digit of the hex code (so i check if needs to be converted to a, b etc.) then try and combine it with the prefix 0xE to create the hex code.
I'm not quite sure how to do this bit as I cant carry out
num = 7;
hex = "0xE"+num;
int i = hex;as the last line doesn't calculate due to hex being a string.
Many thanks for your help.leesto wrote:
The char array is currently being created using:
char [] hexchar = "0123456789ABCDEF".toCharArray();
Look this is OK, you need to do nothing but just the following:
// I am using the very first example you provided
// i is the index for the char
String hex = "0E" + hexchar;
Integer.parseInt(hex, 16);
System.out.println(i); -
How to convert hex string to time stamp?
Hello everyone..
I am currently working on a project in which I have to read the data from a unit and display that data using LabVIEW. I am using serial communication for reading the data. The read data is in hex format.
Now, I want to convert this hex string to a time stamp value. I am reading total 16 bytes. How to convert this hex data to a time stamp value. I have developed a VI. But I want to know that the displayed time stamp is correct or not? Or suggest me some other solution.
I am using LabVIEW 2011.
Thanks & Regards,
Manisha
Attachments:
Test.vi 7 KBHi mancan,
As Iam using LV2009 Iam unable to open your example.Anyway for converting hex to time stamp
Thanks as kudos only -
Convert hex to Decimal and keep leading zeros..
Hi,
I hope you can help?
How to convert hex to Decimal and keep leading zeros
I read 002C, hex, and I want to convert it to 0044 decimal.
sscanf (MyNum, "%4x", &DecNum); will only give me 44.
It have been working up till I started to get leading zeros.
We will always have a 4 digit hex input in a range
We must have the leading 00 in this case.
How is this best done?
Thanks for the help
Simon
Solved!
Go to Solution.Hi,
I don't really understand your problem. Is this stuff what you need ?
int main (int argc, char *argv[])
const char MyNum[] = "002C";
int DecNum;
sscanf (MyNum, "%4x", &DecNum);
printf ("%04d", DecNum);
getchar ();
return 0;
"0044" appears on standard output when printf function executes... -
Cannot be converted in type DEC,CURR - longtext
Dear,
When we are loading the data to the targets, we are getting the errors in the Transfer rules like mentioned bellow
Info source 0EC_CS_1 (Transaction Data for Consolidation)
Status (tab) :
Technical : Collection in source system ended
Processing Step : Processing End
Details (tab):
Processing end : Errors occurred
Error records written to application log
Error in an arithmetic operation in record 1
Record 1 :Contents 00 0.0000000 from field PCNT1 cannot be converted in type DEC ->longtext
Info source 0CO_OM_CCA_9 (Cost Centers: Actual Costs with Delta E)
Record 39952:Contents 048624.95- 1 from field SWF cannot be converted in type CURR ->longtext
Kindly help.
Thanks & Regards,
Kiran A
Edited by: Kiran A on Mar 21, 2010 10:23 AM
Edited by: Kiran A on Mar 21, 2010 11:36 AMHi,
It is sure some where in transferrules the mapping wasdone wrongly , like char --char of info object but in ur case some where data element is not same for field and info object.
check throughly transfer rules correctly field level and infoobject mapping and activate.
it is some where currency and unit fields the difference is there for data elements
Thanks&Regards,
Sathish
Edited by: sathish kakumudi on Mar 21, 2010 4:01 PM -
Convertion Hex String to 32bits Decimal floating point??
Hi,
I would like to know how to convert hexa like: 416b0ac3 in decimal 32bits floating-point. The result of this string is suppose to be 14.690127.
So i must be able to do:
From 32-bit Hexadecimal Representation To Decimal Floating-Point
Thanks for your support
RiderMerlinRiderMerlin
You can use the typecast function to do this.
David
Message Edited by David Crawford on 09-06-2006 03:31 PM
Attachments:
Typecast to Single.jpg 6 KB -
Is there an easy way to convert a HEX file format or string to ASCII format? It's easy to convert ASCII to HEX using using "toHexString" but how do you convert HEX back to ASCII?
Integer.parseInt(hexString, 16);
-
Converting byte from dec to hex
Hi All,
I'm having a problem converting byte from decimal to hex - i need the following result:
if entered 127 (dec), the output should be 7f (hex).
The following method fails, of course because of NumberFormatException.
private byte toHexByte(byte signedByte)
int unsignedByte = signedByte;
unsignedByte &= 0xff;
String hexString = Integer.toHexString(unsignedByte);
BigInteger bigInteger = new BigInteger(hexString);
//byte hexByte = Byte.parseByte(hexString);
return bigInteger.byteValue();
}get numberformatexception because a lot of hex digits cannot be transformed into int just like that (ie f is not a digit in decimal) heres some code that i used for a pdp11 assembler IDE... but this is for 16-bit 2s complement in binary/octal/decimal/hex , might be useful for reference as example though
public static String getBase(short i, int base){
String res = (i>=0)? Integer.toString((int)i,base)
: Integer.toString((int)65536+i,base) + " ("+Integer.toString((int)i,base)+")";
StringBuffer pad= new StringBuffer();
for(int x = 0; x < 16 - res.length() ; x++){
pad.append("0");
res = pad.toString() + res;
return res;
} -
How to convert hex into a string value
hei evryone!
can anyone please help me on how to convert a hex value into a string suppose.. Example i want to convert 4275646479 which is a hex value, into a string "BUDDY"? how will i do that???
Any suggestion, tutorial site would be appreciated?
Thx!something like this will convert string to byte[]
e.g.
you want to convert following.
656667 => ABC
String toConvert = "656667";
byte[] returnVal = String2byteArr (toConvert );
String FinalStr = new String(returnVal);
public static byte[] String2byteArr(String Result)
byte[] byteRet = new byte[Result.length()/2];
int k=0;
for (int j=0; j<(Result.length()); j+=2)
try
Integer I = new Integer (0);
I = I.decode ("0x"+Result.substring(j, j+2));
int i = I.intValue ();
if (i > 127)
i = i - 256;
byteRet[k++] = new Integer(i).byteValue();
catch(Exception e)
System.err.println(e);
return byteRet;
}// String2byteArr
Hope this will help you, So that i can get 3$ (:-)
Avi
Maybe you are looking for
-
Method to find version of EHS WWI server
Hello Experts, I'm trying to find out EHS WWI server version by tcode CG5Z [in SAP 4.7] -> Utilities - test server. It gives a popup with WWI server details.-- [WWIRFCSV-Version : EH&S WWI 3.2 ASCII Running as Windows Service This RFC library belongs
-
To add a field in tcode VL01NO
HI, I have a requirement of adding a field (LIPS-LICHV - Vendor Batch Number) in the tcode VL01NO, in screen "Delivery W/O reference. Create: Overvirew" under the tab 'Item Over view" at the item level. I could not find any user/screen exit to do thi
-
Halo around guys head in Illustrator. He's not an angel.
I'm trying to use a photo cut-out (with paths) in Illustrator CS4 from PS CS4 and am having trouble. The photo I'm attempting to export is a bust and, when I pull the .eps into Illustrator, I've got a bit of white that shows around the gentlemans
-
Hi all, I am doing the scenarios File-File with FCC. My source file is as follows. But it is not picking the Empty lines which are there in the source file So My structure as follows: MT_BNK01 1..1 RECORD 0..Unbound --Record_data 0..Unbound So in
-
Why won't this work even though it does on another page?
Hi, I am using XML to populate dynamic data. The Editor/Back-End will load the data no problem. When update is clicked the info is sent to a PHP script and the new xml is written to the file. However, on the front-end, main page, I use the same code,