Converting HP_TOOLS or HP_RECOVERY partition as logical partition
Hi,
I have HP elitebook 8470w notebook.
Its partitions are as below :
System
C:
HP_TOOLS
HP_RECOVERY
All abvoe 4 are primary partition and there is one logical parition. Now I want to create some other partition, reducing size of C: drive via Easus Partition Magic software.
But it prevents me, messaging to convert an existed primary partition to logical one. It is wise one though. As so far I know, win 7 allows only 4 primary partitions and one logical . So, is there any drawbacks converting HP_TOOLS or HP_RECOVERY partition to logical one ? OR do you have some other options for allowing to add new partition ?
Any suggestions are welcomed.
Thanks.
Hello shyamkkhadka,
In order for us to better assist you with your question. I am going to provide you with link to our commercial forum unfortunately you posted to the consumer forum. Because this notebook is commercial they would be better equipped to provide you the information you need. Just click on the link below and it will direct you to the correct forum, you may have to set up a new profile if not just click on new post.
Commercial Notebook Forum
Thank you.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!
Similar Messages
-
Physical Vs Logical Partitioning
We have 2 million records in the sales infocube for 3 years. We are currently discussing the pros and cons of using Logical partitioning Vs Physical Partitioning. Please give your inputs.
hi
there are two types of partitioning generally talked about with SAP BW, logical and physical partitioning.
Logical partitioning - instead of having all your data in a single cube, you might break into separate cubes, with each cube holding aspecific year's data, e.g. you could have 5 sales cubes, one for each year 2001 thru 2005.
You would then create a Multi-Provider that allowed you to query all of them together.
A query that needs data from all 5 years would then automatically (you can control this) be split into 5 separate queries, one against each cube, running at the same time. The system automatically merges the results from the 5 queries into a single result set.
So it's easy to see when this could be a benefit. If your queries however are primarily run just for a single year, then you don't receive the benefit of the parallel processing. In non-Oracle DBs, splitting the data like this may still be a benefit by reducing the amount of rows in the fact table that must be read, but does not provide as much value to an Oracle DB since Infocube queries are using a Star_Transformation.
Physical Partitioning - I believe only Oracle and Informix currently support Range partitioning. This is a separately licensed option in Oracle.
Physical partitioning allows you to split an Infocube into smaller pieces. The pieces, or partitions, can only be created by 0FISCPER or 0CALMONTH for an InfoCube (ODSs can be partitioned, but require a DBAs involvement). The DB can then take advantage of this partitioning by "pruning" partitions during a query, e.g. a query only needs data form June 2005
The DB is smart enough to restrict the indices and data it will read to the June 2005 partition. This assumes your query restricts/filters on the partitioning characteristic. It can apply this pruning to a range of partitions as well, e.g. 0FISCPER 001/2005 thru 003/2005 would only look at the 3 partitions.
It is NOTsmart enough, however, to figure out that if your restrict to 0FISCYEAR = 2005, that it should only read 000/2005 thru 016/2005 since 0FISCYEAR is NOT the partitioning characteristic.
An InfoCube MUST be empty in order to physically partition it. At this time, there is no way to add additional partitions thru AWB, so you want to make sure that you create partitions out into the future for at least a of couple of years.
If the base cube is partitioned, any aggregates that contain the partitioning characteristic (0CALMONTH or 0FISCPER) will automatically be partitioned.
In summary, you need to figure out if you want to use physical or logical partitioning on the cube(s), or both, as they are not mutually exclusive.
So you would need to know how the data will be queried, and the volume of data. It would make little sense to partition cubes that will not be very large.
physical partitioning is done at database level and logical partitioning done at data target level.
Cube partitioning with time characteristics 0calmonth Fiscper is physical partitioning.
Logical partitioning is u partition ur cube by year or month that is u divide the cube into different cubes and create a multiprovider on top of it.
logical Vs physical partitions ? -
How can I undo Converting Recovery Partition to Logical Drive (Oops...) - HP G62-b32sa???
I needed to create a new partition, but to do that Easeus Partition Master 9.00 Home Edition (I like using this compared to the Windows one..) stated that I needed to convert one of the 4 pre-made partitions from Primary to Logical. The following partitions were pre-made with my laptop, HP G62-b32SA, all of which were Primary:
*: SYSTEM
C:
D: RECOVERY
*: HP_TOOLS
I could only convert the "D: Recovery" to Logical, so I went ahead, and then could create a new partition. But now after reading several post on this Forum, I realised what a mistake that was. I found that that converting the Recovery partition to Logical renders it useless... "Oops" I said. Now I wonder that if I convert the Recovery partition back to Primary, will I be able to use it again, or has the damage been done? But then the other problem is that it won't allow me to convert the Recovery Partition back to Primary, claiming "there are no free MBR slots". Also, I have a feeling that I'll have to delete my newly created partition to convert the Recovery partition back to Primary, but then how do I create a new partition without converting any of the existing to Logical? Endless questions, I know. So now I ask, what is the best thing to do??
BTW this is my first HP Laptop...
This question was solved.
View Solution.How to handle this situation, back up your personal data and use the HP Recovery Discs to restore the PC
Make your recovery discs now, use good quality DVD+R media
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867124
Once you are back to normal partitions, see this thread on how to make another partition without damaging the other 4
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/How-to-repartition-HDD-of-HP-notebook-with-... -
Use of Logical Partition in a Oracle Table...
What is the use of Logical Partition in a Oracle Table as Target. Techincal Manual does not say any significance.
My question is:
If the Table has no partitions and if we add Logical Partitions using Data Service, what purpose will it serve?
We are planning to load 30 Million records a day into a Oracle Table. As of now the Target table has no partition and we are planning to have that soon. Is there a better way to load the data into Target Table, using Partition, Bulk Loading(API), Degree of Parallelism, etc., We have not dealt data of that volume, inputs are highly appreciated.
Regards.
Santosh.Initial Value:
Indicator that NOT NULL is forced for this field
Use
Select this flag if a field to be inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field.
Please note that fields in the database for which the this flag is not set can also be filled with initial values.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.
Restrictions and notes:
The initial value cannot be set for fields of data types LCHR, LRAW, and RAW. If the field length is greater than 32, the initial flag cannot be set for fields of data type NUMC.
If a new field is inserted in the table and the initial flag is set, the complete table is scanned on activation and an UPDATE is made to the new field. This can be very time-consuming.
If the initial flag is set for an included structure, this means that the attributes from the structure are transferred. That is, exactly those fields which are marked as initial in the definition have this attribute in the table as well.
hope it helps,
Saipriya -
Cannot create another 2 logical partitions on another physical server
when i installed the BI 7.0 on AIX/DB2 9 platform. i can create 2 logical partition on the main server , yet i couldn't create another 2 logical parttions on the second server. the following is the error message
INFO 2008-02-21 03:49:03.490
"sapinst_dev.log" [Read only] 20411 lines, 744293 characters
TRACE 2008-02-21 03:51:28.513 [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
Found Error, error_codes[1] = <db2start dbpartitionnum 5 add dbpartitionnum hostname sapaix08 port 3 without tablespaces
SQL6073N Add Node operation failed. SQLCODE = "-1051".>
TRACE 2008-02-21 03:51:28.513 [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
During execution of <AddPart.sql>, <2> errors occured.
ERROR 2008-02-21 03:51:28.513 [iaxxinscbk.cpp:282]
abortInstallation
MDB-01999 Error occured, first error is: <SQL6073N Add Node operation failed. SQLCODE = "-1051".>
TRACE 2008-02-21 03:51:28.514 [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2008-02-21 03:51:28.515
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE 2008-02-21 03:51:28.515 [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-02-21 03:51:28.516 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step AddDB6Partitions with step key |NW_DB6_DB_ADDPART|ind|ind|ind|ind|0|0|NW_DB6_AddPartitions|ind|ind|ind|ind|12|0|
AddDB6Partitions was executed with status ERROR .
TRACE 2008-02-21 03:51:28.539 [iaxxgenimp.cpp:719]
showDialog()
the following is my prerequisite for the installation
1. the user and group id and property is the same as the primary (server1)
2. the ssh trust relationship has built , i can ssh server1 from server2 or server2 from server1 with db2sid, sidadm users
3. i mount the /db2/db2sid , /db2/SID/db2dumps, /sapmnt/SID/exe on server2 as NFS
4. install the db2 software on /opt/IBM/db2/V9.1 (the location is the same as the primary's)
HI , DB2 experts. Could you give me some suggestion? thanks!Hi,Thomas,
Thanks for your help. the db2 database desn't use the autostoarge method and the relevant permission is the same as server1. i checked the db2dialog.log. the following is the detail information
"Storage path does not exist or is inaccessible" is the error message . i was wondering which storage path does not exit or inaccessible .
at the same time i have login on all /db2 with db2sid and run touch to test the permision . it sounds good. I don't know what happens , could you give me some suggestion ? thanks!
2008-02-21-08.10.56.442000-300 I14165596A287 LEVEL: Event
PID : 843832 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:240
DATA #1 : String, 26 bytes
Stop phase is in progress.
2008-02-21-08.10.56.444783-300 I14165884A302 LEVEL: Event
PID : 843832 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:250
DATA #1 : String, 41 bytes
Requesting system controller termination.
2008-02-21-08.10.56.450366-300 I14166187A403 LEVEL: Warning
PID : 712906 TID : 1 PROC : db2sysc 5
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, routine_infrastructure, sqlerKillAllFmps, probe:5
MESSAGE : Bringing down all db2fmp processes as part of db2stop
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFE400 : 0000 0000 ....
2008-02-21-08.10.56.456345-300 I14166591A304 LEVEL: Event
PID : 843832 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2008-02-21-08.10.56.461462-300 I14166896A381 LEVEL: Event
PID : 843832 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCEE0 : 0000 0000 ....
2008-02-21-08.10.56.504322-300 I14167278A342 LEVEL: Severe
PID : 823374 TID : 1 PROC : db2acd 5
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, routine_infrastructure, sqlerFmpOneTimeInit, probe:100
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFF5A4 : FFFF FBEE ....
2008-02-21-08.10.56.654959-300 E14167621A301 LEVEL: Event
PID : 843832 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP : DB2 DBM
2008-02-21-08.11.09.664000-300 I14167923A417 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 53 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile FORCE1 0 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0022 ..."
2008-02-21-08.11.10.176098-300 I14168341A417 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 53 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile FORCE1 1 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0022 ..."
2008-02-21-08.11.10.595702-300 I14168759A417 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 53 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile FORCE1 2 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0022 ..."
2008-02-21-08.11.11.124888-300 I14169177A417 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 53 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile FORCE1 3 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0022 ..."
2008-02-21-08.11.12.070605-300 I14169595A410 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 46 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile 0 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0020 ...
2008-02-21-08.11.12.694723-300 I14170006A410 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 46 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile 1 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0020 ...
2008-02-21-08.11.13.115940-300 I14170417A410 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 46 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile 2 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0020 ...
2008-02-21-08.11.13.632046-300 I14170828A410 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 46 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile 3 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0020 ...
2008-02-21-08.11.14.577056-300 I14171239A418 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 54 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 0 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0024 ...$
2008-02-21-08.11.15.004794-300 I14171658A418 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 54 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 1 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0024 ...$
2008-02-21-08.11.15.425920-300 I14172077A418 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 54 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 2 0
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0024 ...$
2008-02-21-08.11.15.941622-300 I14172496A418 LEVEL: Event
PID : 639410 TID : 1 PROC : db2stop
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 54 bytes
/db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 3 1
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9CBC : 0000 0024 ...$
2008-02-21-08.11.17.002107-300 I14172915A422 LEVEL: Event
PID : 639412 TID : 1 PROC : db2start
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 57 bytes
/db2/db2ab7/sqllib/adm/db2rstar db2profile SN ADDNODE 4 2
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9C2C : 0000 0011 ....
2008-02-21-08.11.18.055723-300 E14173338A856 LEVEL: Warning
PID : 806940 TID : 1 PROC : db2star2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "80" day(s) left in the evaluation period for
the product "DB2 Enterprise Server Edition". For evaluation license
terms and conditions, refer to the IBM License Acceptance and License
Information document located in the license directory in the
installation path of this product. If you have licensed this product,
ensure the license key is properly registered. You can register the
license via the License Center or db2licm command line utility. The
license file can be obtained from your licensed product CD.
2008-02-21-08.11.18.296453-300 E14174195A1040 LEVEL: Event
PID : 806940 TID : 1 PROC : db2star2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ab7" uses "64" bits and DB2 code release "SQL09012"
with level identifier "01030107".
Informational tokens are "DB2 v9.1.0.2", "special_17253", "U810940_17253", Fix Pack "2".
DATA #2 : System Info, 224 bytes
System: AIX sapaix08 3 5 00CCD7FE4C00
CPU: total:8 online:8 Threading degree per core:2
Physical Memory(MB): total:7744 free:5866
Virtual Memory(MB): total:32832 free:30943
Swap Memory(MB): total:25088 free:25077
Kernel Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
shmMax:68719476736 shmMin:1 shmIDs:131072
shmSegments:68719476736 semIDs:131072 semNumPerID:65535
semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
2008-02-21-08.11.19.312894-300 I14175236A428 LEVEL: Error
PID : 835728 TID : 1 PROC : db2agent (instance) 4
INSTANCE: db2ab7 NODE : 004
APPHDL : 4-7 APPID: *LOCAL.db2ab7.080221131118
FUNCTION: DB2 UDB, base sys utilities, sqleGetAutomaticStorageDetails, probe:111111
DATA #1 : <preformatted>
dataSize 752 pMemAlloc 1110cdac0 sizeof(struct sqleAutoStorageCfg) 16
2008-02-21-08.11.19.346560-300 I14175665A497 LEVEL: Error
PID : 835728 TID : 1 PROC : db2agent (instance) 4
INSTANCE: db2ab7 NODE : 004
APPHDL : 4-7 APPID: *LOCAL.db2ab7.080221131118
FUNCTION: DB2 UDB, buffer pool services, sqlbInitStorageGroupFiles, probe:50
MESSAGE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
DATA #1 : String, 17 bytes
/db2/AB7/sapdata1
2008-02-21-08.11.19.349637-300 I14176163A619 LEVEL: Severe
PID : 835728 TID : 1 PROC : db2agent (instance) 4
INSTANCE: db2ab7 NODE : 004
APPHDL : 4-7 APPID: *LOCAL.db2ab7.080221131118
FUNCTION: DB2 UDB, buffer pool services, sqlbInitStorageGroupFiles, probe:50
MESSAGE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
DATA #1 : String, 46 bytes
Error during storage group file initialization
DATA #2 : Pointer, 8 bytes
0x0ffffffffffed006
DATA #3 : Pointer, 8 bytes
0x00000001110b3080
2008-02-21-08.11.19.355029-300 I14176783A435 LEVEL: Error
PID : 835728 TID : 1 PROC : db2agent (instance) 4
INSTANCE: db2ab7 NODE : 004
APPHDL : 4-7 APPID: *LOCAL.db2ab7.080221131118
FUNCTION: DB2 UDB, base sys utilities, sqleStartDb, probe:5
RETCODE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
2008-02-21-08.11.19.357831-300 I14177219A370 LEVEL: Warning
PID : 835728 TID : 1 PROC : db2agent (instance) 4
INSTANCE: db2ab7 NODE : 004
APPHDL : 4-7 APPID: *LOCAL.db2ab7.080221131118
FUNCTION: DB2 UDB, base sys utilities, sqle_remap_errors, probe:100
MESSAGE : ZRC 0x800201a5 remapped to SQLCODE -1051
2008-02-21-08.11.19.374857-300 I14177590A336 LEVEL: Severe
PID : 803022 TID : 1 PROC : db2sysc 4
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, sqleSysCtrlAddNode, probe:6
MESSAGE : ADD NODE failed with SQLCODE -1051 MESSAGE TOKEN /db2/AB7/sapdata1 in module SQLECRED
2008-02-21-08.11.19.381604-300 I14177927A440 LEVEL: Event
PID : 639412 TID : 1 PROC : db2start
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 75 bytes
DB2NODE=4 DB2LPORT=2 /db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 4 2
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9C2C : 0000 0024 ...$
2008-02-21-08.11.20.255191-300 I14178368A287 LEVEL: Event
PID : 700804 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:240
DATA #1 : String, 26 bytes
Stop phase is in progress.
2008-02-21-08.11.20.258575-300 I14178656A302 LEVEL: Event
PID : 700804 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:250
DATA #1 : String, 41 bytes
Requesting system controller termination.
2008-02-21-08.11.20.265164-300 I14178959A403 LEVEL: Warning
PID : 803022 TID : 1 PROC : db2sysc 4
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, routine_infrastructure, sqlerKillAllFmps, probe:5
MESSAGE : Bringing down all db2fmp processes as part of db2stop
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFE400 : 0000 0000 ....
2008-02-21-08.11.20.271570-300 I14179363A304 LEVEL: Event
PID : 700804 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2008-02-21-08.11.20.276550-300 I14179668A381 LEVEL: Event
PID : 700804 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCEE0 : 0000 0000 ....
2008-02-21-08.11.20.312260-300 I14180050A342 LEVEL: Severe
PID : 774176 TID : 1 PROC : db2acd 4
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, routine_infrastructure, sqlerFmpOneTimeInit, probe:100
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFF5A4 : FFFF FBEE ....
2008-02-21-08.11.20.474332-300 E14180393A301 LEVEL: Event
PID : 700804 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 004
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP : DB2 DBM
2008-02-21-08.11.20.600512-300 I14180695A422 LEVEL: Event
PID : 671870 TID : 1 PROC : db2start
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 57 bytes
/db2/db2ab7/sqllib/adm/db2rstar db2profile SN ADDNODE 5 3
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9C2C : 0000 0011 ....
2008-02-21-08.11.21.620771-300 E14181118A856 LEVEL: Warning
PID : 819454 TID : 1 PROC : db2star2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "80" day(s) left in the evaluation period for
the product "DB2 Enterprise Server Edition". For evaluation license
terms and conditions, refer to the IBM License Acceptance and License
Information document located in the license directory in the
installation path of this product. If you have licensed this product,
ensure the license key is properly registered. You can register the
license via the License Center or db2licm command line utility. The
license file can be obtained from your licensed product CD.
2008-02-21-08.11.21.839933-300 E14181975A1040 LEVEL: Event
PID : 819454 TID : 1 PROC : db2star2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ab7" uses "64" bits and DB2 code release "SQL09012"
with level identifier "01030107".
Informational tokens are "DB2 v9.1.0.2", "special_17253", "U810940_17253", Fix Pack "2".
DATA #2 : System Info, 224 bytes
System: AIX sapaix08 3 5 00CCD7FE4C00
CPU: total:8 online:8 Threading degree per core:2
Physical Memory(MB): total:7744 free:5859
Virtual Memory(MB): total:32832 free:30936
Swap Memory(MB): total:25088 free:25077
Kernel Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
shmMax:68719476736 shmMin:1 shmIDs:131072
shmSegments:68719476736 semIDs:131072 semNumPerID:65535
semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
2008-02-21-08.11.22.860106-300 I14183016A428 LEVEL: Error
PID : 37336 TID : 1 PROC : db2agent (instance) 5
INSTANCE: db2ab7 NODE : 005
APPHDL : 5-7 APPID: *LOCAL.db2ab7.080221131121
FUNCTION: DB2 UDB, base sys utilities, sqleGetAutomaticStorageDetails, probe:111111
DATA #1 : <preformatted>
dataSize 752 pMemAlloc 11099bac0 sizeof(struct sqleAutoStorageCfg) 16
2008-02-21-08.11.22.886670-300 I14183445A497 LEVEL: Error
PID : 37336 TID : 1 PROC : db2agent (instance) 5
INSTANCE: db2ab7 NODE : 005
APPHDL : 5-7 APPID: *LOCAL.db2ab7.080221131121
FUNCTION: DB2 UDB, buffer pool services, sqlbInitStorageGroupFiles, probe:50
MESSAGE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
DATA #1 : String, 17 bytes
/db2/AB7/sapdata1
2008-02-21-08.11.22.889226-300 I14183943A619 LEVEL: Severe
PID : 37336 TID : 1 PROC : db2agent (instance) 5
INSTANCE: db2ab7 NODE : 005
APPHDL : 5-7 APPID: *LOCAL.db2ab7.080221131121
FUNCTION: DB2 UDB, buffer pool services, sqlbInitStorageGroupFiles, probe:50
MESSAGE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
DATA #1 : String, 46 bytes
Error during storage group file initialization
DATA #2 : Pointer, 8 bytes
0x0ffffffffffed006
DATA #3 : Pointer, 8 bytes
0x0000000110981080
2008-02-21-08.11.22.894826-300 I14184563A435 LEVEL: Error
PID : 37336 TID : 1 PROC : db2agent (instance) 5
INSTANCE: db2ab7 NODE : 005
APPHDL : 5-7 APPID: *LOCAL.db2ab7.080221131121
FUNCTION: DB2 UDB, base sys utilities, sqleStartDb, probe:5
RETCODE : ZRC=0x800201A5=-2147352155=SQLB_AS_INVALID_STORAGE_PATH
"Storage path does not exist or is inaccessible."
2008-02-21-08.11.22.897320-300 I14184999A370 LEVEL: Warning
PID : 37336 TID : 1 PROC : db2agent (instance) 5
INSTANCE: db2ab7 NODE : 005
APPHDL : 5-7 APPID: *LOCAL.db2ab7.080221131121
FUNCTION: DB2 UDB, base sys utilities, sqle_remap_errors, probe:100
MESSAGE : ZRC 0x800201a5 remapped to SQLCODE -1051
2008-02-21-08.11.22.913142-300 I14185370A336 LEVEL: Severe
PID : 758092 TID : 1 PROC : db2sysc 5
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, sqleSysCtrlAddNode, probe:6
MESSAGE : ADD NODE failed with SQLCODE -1051 MESSAGE TOKEN /db2/AB7/sapdata1 in module SQLECRED
2008-02-21-08.11.22.918953-300 I14185707A440 LEVEL: Event
PID : 671870 TID : 1 PROC : db2start
INSTANCE: db2ab7 NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:1100
DATA #1 : String, 75 bytes
DB2NODE=5 DB2LPORT=3 /db2/db2ab7/sqllib/adm/db2rstop db2profile NODEACT 5 3
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFF9C2C : 0000 0024 ...$
2008-02-21-08.11.23.793386-300 I14186148A287 LEVEL: Event
PID : 823654 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:240
DATA #1 : String, 26 bytes
Stop phase is in progress.
2008-02-21-08.11.23.796267-300 I14186436A302 LEVEL: Event
PID : 823654 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:250
DATA #1 : String, 41 bytes
Requesting system controller termination.
2008-02-21-08.11.23.802154-300 I14186739A403 LEVEL: Warning
PID : 758092 TID : 1 PROC : db2sysc 5
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, routine_infrastructure, sqlerKillAllFmps, probe:5
MESSAGE : Bringing down all db2fmp processes as part of db2stop
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFE400 : 0000 0000 ....
2008-02-21-08.11.23.808100-300 I14187143A304 LEVEL: Event
PID : 823654 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2008-02-21-08.11.23.812951-300 I14187448A381 LEVEL: Event
PID : 823654 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCEE0 : 0000 0000 ....
2008-02-21-08.11.23.882148-300 I14187830A342 LEVEL: Severe
PID : 684418 TID : 1 PROC : db2acd 5
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, routine_infrastructure, sqlerFmpOneTimeInit, probe:100
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFF5A4 : FFFF FBEE ....
2008-02-21-08.11.24.008936-300 E14188173A301 LEVEL: Event
PID : 823654 TID : 1 PROC : db2stop2
INSTANCE: db2ab7 NODE : 005
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP : DB2 DBM
2008-02-21-08.41.01.094426-300 I14188475A371 LEVEL: Warning
PID : 741576 TID : 1 PROC : db2bp
INSTANCE: db2ab7 NODE : 002
FUNCTION: DB2 UDB, Connection Manager, sqleUCappImpConnect, probe:150
RETCODE : ZRC=0x8005006D=-2147155859=SQLE_CA_BUILT
"SQLCA has been built and saved in component specific control block."
2008-02-21-08.41.01.109657-300 I14188847A371 LEVEL: Warning
PID : 741576 TID : 1 PROC : db2bp
INSTANCE: db2ab7 NODE : 002
FUNCTION: DB2 UDB, Connection Manager, sqleUCappImpConnect, probe:150
RETCODE : ZRC=0x8005006D=-2147155859=SQLE_CA_BUILT
"SQLCA has been built and saved in component specific control block."
2008-02-21-08.41.01.115152-300 I14189219A371 LEVEL: Warning
PID : 741576 TID : 1 PROC : db2bp
INSTANCE: db2ab7 NODE : 002
FUNCTION: DB2 UDB, Connection Manager, sqleUCappImpConnect, probe:150
RETCODE : ZRC=0x8005006D=-2147155859=SQLE_CA_BUILT
"SQLCA has been built and saved in component specific control block." -
Finding whole mapping from database file - filesystems - logical volume manager - logical partitions
Hello,
Trying to make reverse engeneering of database files and their physical carriers on logical partitions ( fdisk ).
And not able to make whole path from filesystem down to partitions with intermediate logical volumes.
1. select from dba_data_files ...
2. df -k
to get the listing of filesystems
3. vgdisplay
4. lvdisplay
5. cat /proc/partitions
6. fdisk /dev/sda -l
fdisk /dev/sdb -l
Problem I have is that not able to determine which partitions are consisten in logical volumes. And then which logical volumens are consisted in filesystem.
Thank you for hint or direction.Hello Wadhah,
Before start the discussion let me explain I am newcommer to Oracle Linux. My genetic with dba experience of Oracle is from IBM UNIX ( AIX 6.1 ) and Oracle 11gr2.
First task is to get the complete picture of one database on Oracle Linux for future maintenance tasks and make database more flexible and
preparing for more intense work:
-adding datafiles,
-optimize/replace archive redolog files on separated filesystem from ORACLE_BASE
- separating auditing log files from $ORACLE_BASE to own filesystem
- separating diag directory on separated file system ( logging, tracing )
- adding/enlarging TEMP ts
- adding/enlarging undo
- enlarging redo for higher transaction rate ( to reduce number of switched per time perceived in alert_SID.log )
- adding online redo and control files mirrors
So in this context try to inspect content of the disk space from the highest logical level in V$, DBA views down to fdisk partitions.
The idea was to go in these steps:
1. select paths of present online redo groups, datafiles, controlfiles, temp, undo
from V$, dba views
2. For the paths got from the step 1
locate filesystems and for those filesystems inspect which are on logical volumens and which are directly on partitions.
3. For all used logical volumes locate the logical partitions and their disks /dev/sda, /dev/sdb, ... -
Solaris in Logical Partition and Internet Configuration
Hi !
I'm really passionate about this unix-solaris thing.
But these nudges are pulling me back from installing it actually in my hard drive.
And also there is the Internet configuration problem.
Problem:1
I have 2 IDE HDD.
Primary HDD: 80 GB
VolumeName-Type-Size
SystemBoot-Primary/Active/NTFS-100 MB
Extended Partition:
VISTA-Logical/NTFS-20 GB
2008-Logical/NTFS-10 GB
Data-Logical/NTFS-25 GB
Music-Logical/NTFS-9.42 GB
Solaris-Logical/BLANK-10GB .....Blank = No FS. Used Acronis DD10 for it.
Slave HDD: 40 GB
Extended Partition:
XP-Logical/NTFS-10GB
Fedora9-Logical/ext3-10GB
SWAP-Logical/SWAP-2GB
OpenSUSE103-Logical/ext3-15.25 GB
When I came to HDD configuration stage of installation,
I selected the pre-selected c0d0(bootdisk) ---Primary HDD/80GB.
But when I proceeded further it showed me:
Warning � The initial fdisk information found on the disk
c0d0 was invalid. Defaulting the entire disk to a Solaris partition.
So I aborted the installation.
I tried one more time, by changing the Solaris Blank logical drive to a primary partition.
But it didn't work.
Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.
Please help me on this.
I'm sick of installing it in VMWare.
Problem: 2
How am I supposed to configure my network connection.
I connect to my ISP using WAN Miniport(PPPOE).
It allots me dynamic IP(v4).
I read somewhere DNS should f.root-servers.net and in a magazine, a.solaris.net
I never came across such a thing in even in linux.
Problem: 3
If there is not so �feasible� solution to problem 1, VMWare Workstation comes into play.
And here too, I need help for configuration of network connection.
These are the values that I got when I installed Windows XP in the VMWare.
LAC -Local Area Connection
LAC � Limited or no connectivity
IP � 169.254.127.90
Subnet -255.255.0.0
Adapter #2 � Bridged
LAC -2
IP -192.168.21.132
Subnet 255.255.255.0
Gateway -192.168.21.2
DHCP Srv 192.168.21.254
DNS/WINS Srv 192.168.21.2
Adapter#1 � NAT
LAC � 3
IP 192.168.209.135
Subnet 255.255.255.0
DHCP Srv 192.168.209.254
DNS � 192.168.209.1
Adapter #3 � Host Only
Thanks In Advance !Natty wrote:
Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.This is correct. You need a primary partition (or space for one) for Solaris to install on the drive.
Problem: 3
If there is not so “feasible” solution to problem 1, VMWare Workstation comes into play.
And here too, I need help for configuration of network connection.
These are the values that I got when I installed Windows XP in the VMWare.
LAC -Local Area Connection
LAC – Limited or no connectivity
IP – 169.254.127.90
Subnet -255.255.0.0
Adapter #2 – BridgedThat's an autoconfig IP. It suggests that it tried to do DHCP on the interface and failed. Perhaps you need to configure a hard address.
LAC -2
IP -192.168.21.132
Subnet 255.255.255.0
Gateway -192.168.21.2
DHCP Srv 192.168.21.254
DNS/WINS Srv 192.168.21.2
Adapter#1 – NATThat's the NAT address. Any problems using it? That's the normal way I use my Solaris VM hosts.
LAC – 3
IP 192.168.209.135
Subnet 255.255.255.0
DHCP Srv 192.168.209.254
DNS – 192.168.209.1
Adapter #3 – Host OnlyAnd that's the host-only adapter. That won't be useful for reaching resources off the VM host.
Darren -
Sql to create logical partitions
Oracle: 10.2.0.5
I am working with another group and they are pulling data from one of the databases I work on. They are using what they call 'logical partitions'. Basically it is a sql statement with a MOD function in the where clause.
select *
from table
where mod(field,10) = 0This allows them to divide the table up into 10 chunks. So they run 10 sessions to pull data across the network. They are using array processing(1000 records at a time) in a 3rd party tool to pull the data and write it to teradata. I have no ability to change this process to something else. They are not using a cursor. its just a fetch of 1000 recorsd at a time. I checked that first.
The MOD function forces a full table scan. Before I go and and add a bunch of function based indexes to support this, does anyone know of another way to write these sqls without having to have a function on the left side of the where clause and get it to use an index? I want an index in part because 10 sessions is too slow to pull the data in an acceptable time so I want to increase the number of sessions i can handle. We are pulling from a number of tables so if its all full table scans I am far more constrained on my side.
I am hoping there is a way to on the fly chunk a table with buckets or something and use an index. So I can ramp this up to say 20-30 sessions per table so each session gets 1/20 or 1/30 of the table.Guess2 wrote:
Oracle: 10.2.0.5
I am working with another group and they are pulling data from one of the databases I work on. They are using what they call 'logical partitions'. Basically it is a sql statement with a MOD function in the where clause.
select *
from table
where mod(field,10) = 0This allows them to divide the table up into 10 chunks. So they run 10 sessions to pull data across the network. They are using array processing(1000 records at a time) in a 3rd party tool to pull the data and write it to teradata. I have no ability to change this process to something else. They are not using a cursor. its just a fetch of 1000 recorsd at a time. I checked that first.
The MOD function forces a full table scan. Before I go and and add a bunch of function based indexes to support this, does anyone know of another way to write these sqls without having to have a function on the left side of the where clause and get it to use an index? I want an index in part because 10 sessions is too slow to pull the data in an acceptable time so I want to increase the number of sessions i can handle. We are pulling from a number of tables so if its all full table scans I am far more constrained on my side.
I am hoping there is a way to on the fly chunk a table with buckets or something and use an index. So I can ramp this up to say 20-30 sessions per table so each session gets 1/20 or 1/30 of the table.From the school of thought that if some is good, then more is better.
I suspect that the spindle upon which this table resides will be saturated
with I/O requests long before 20 is reached.
Session (CPU) is 100 - 1000 times faster than mechanical disk.
Sessions as few as a half dozen can overwhelm single disk drive. -
Unable to convert the sender service to an ALE logical system
Hello,
file adapter > XI 3.0 > Idoc adapter > r/3 system
In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI > idoc scenario to this same r/3 system (using same sld business system)
I read other topics on this error but it seems they all talk about an IDOC outbound interface.
What should I check?
Thanks
BoazI do have the same problem as Boaz Paz
When I try :
file adapter > XI 3.0 > Idoc adapter > r/3 system
> This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
I get an error while XI tries to call its IDoc Adapter:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>AwayOrders</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
With the following trace logs :
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = AVTItalie</Trace>
<Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
2. declare "AVTItalia" as a business partner in SLD with the logical system name
Plz help! -
File-idoc Unable to convert the sender service to an ALE logical syste
Hi experts
iam working on file-idoc scenario ,iam getting the below error in sxmb_moni and RWB
"Unable to convert the sender service to an ALE logical system"
i checked the partnetr profile, RFC(sm59) and IDX1 t codes.
the connection is ok. but still i could figureout the problem.
please suggest me
Thanks
vasaviHi,
Have u checked the logical system is added in the Sender Business service in the Integration Directory?
Open the Buiness Service/System --> EDIT-ADAPTER SPECIFIC IDENTIFIERS
then specify the logical system name.
Go throgh the following link
Troubleshooting File-to-IDOC Scenario in XI.
Regards
Sridhar Goli -
SOAP to IDOC: Unable to convert sender service BS to an ALE logical system
Hello everyone,
I have this scenario where i receive web services calls and have to integrate the received xml messages (idocs) into SAP R3 system.
I allready reveive the message in my XI engine, but i'm getting this error (being BS the name of my Business Service included in my external party):
"Unable to convert sender service BS to an ALE logical system"
I allready tried everything that is specified in this blog:
The specified item was not found.
Probably it doesn' fit my requirements. I'm not sure...
Can anyone help ?
Thank you in advance for any help
Nuno- do u have the same logical name defined in the BS and in the Adapter specific attributes.
also check if u have defined the logical system (SALE ) with the same name. -
Unable to convert sender service(BPM) to an ALE logical system
Hi All,
I am working on simple File to File Scenario where XI picks the File and process thru BPM and sends the file to R/3 Application server and wait for SYSTAT STATUS IDoc for the acknowledgement from R/3 System.
My scenario is working fine by receiving the STATUS IDoc and closing the BPM instance.
But later I am getting System error message as below:
Unable to convert sender service (BPM) to an ALE logical system
Any clues in this case?
Thanks in Advance.
Regards
Sudha.Hi Rajesh,
1. I am receiving the file into BPM and after validation Iu2019m splitting the file into multiple files.
2. Each split file sent to R/3 Application Server(by activating the correlation with the filename)
3. BPM will wait for SYSTAT STATUS IDoc (by using correlation with the filename) from R/3 System
for acknowledgement purpose. After receiving the respective STATUS IDoc (with the filename) then
BPM will close the instance.
4. If the STATUS IDoc not received with in specified duration an alert will raise and close the BPM
instance.
So we are not sending the STATUS IDoc data to Sender system.
Regards
Sudha. -
We have a cube logical partitioned by sales org. We now would like to add additional sales org's to the list. Is this possible?? Currently with data in the cube it is blocked. Does anyone know steps to re-logical partition a cube?? With/or without data re-loading? Any options at the database level (oracle)?
Thanks!!Hi,
Yes that is correct you cant do cube partitioning with existing data.
Another important thing is based upon selection conditions only you can do the partitioning. There are two selection conditions they are as follows.
1. 0CALMONTH
2. 0FISCAL YEAR PERIOD
if these two time characteristics were not used in the cube means you can't partition the cube.
STEPS TO PARTITION THE INFOCUBE:
for example if you have Sales and Distribution cube you want to do logical partitioning on that cube.
we have to create infocube with same structure ( this we can do by giving the technical name of the cube in copy from option) at the time of creation of cube. Activate the cube and come back.
then you should create update rules for that cube.
select the first cube right click on it choose the option generate export datasource.
the system will finish generation process.
select the infosource option on the left side of the AWB.
in that we have DATAMART select it choose refresh icon.
you get the infosource with datasource assignment.
select the data source right click on it choose create infopackage.
it will take you to the maintain infopackage screen.
here you need to select the datatarget tab and select the target into which the data need to be updated.
schedule it and start.
now manage the data target and check the data has been updated or not.
after doing all this process go to infoprovider select the first cube delete the data.
now depending upon your requirement do the partitioning.
double click on the cube it will take you to the edit infocube screen from the menu bar select extras it will display the partitioning option select it.
then it will popup one small wizard showing the time characteristics based upon your requirement choose which ever you want check that box and continue the process.
Hope this will help you
Thanks and Regards
Vara Prasad -
Logical partitioning, pass-through layer, query pruning
Hi,
I am dealing with performance guidelines for BW and encountered few interesting topics, which however I do not fully undestand.
1. Mainetance of logical partitioning.
Let's assume logical partitioning is performed on year. Does it mean that every year or so it is necessary to create additional cube/transformation and modify multiprovider? Is there any automatic procedure by SAP that supports creation of new objects, or it is fully manual?
2.Pass- though layer.
There are very few information about this basic concept. Anyway:
- is pass through DSO write optimized one? Does it store only one loading - last one? Is it deleted after lading is sucessfully finished (or before new load starts)? And - does this deletion do not destroy delta mechanism? Is the DSO replacing PSAfunctionally (i.e. PSA can be deleted every load as well)?
3. Query pruning
Does this happen automatically on DB level, or additional developments with exits variables, steering tables and FMs is required?
4. DSOs for master data loads
What is the benefit of using full MD extraction and DSO delta insetad of MD delta extraction?
Thanks,
Marcin1. Mainetance of logical partitioning.
Let's assume logical partitioning is performed on year. Does it mean that every year or so it is necessary to create additional cube/transformation and modify multiprovider? Is there any automatic procedure by SAP that supports creation of new objects, or it is fully manual?
Logical partitioning is when you have separate ODS / Cubes for separate Years etc ....
There is no automated way - however if you want to you can physically partition the cubes using time periods and extend them regularly using the repartitioning options provided.
2.Pass- though layer.
There are very few information about this basic concept. Anyway:
- is pass through DSO write optimized one? Does it store only one loading - last one? Is it deleted after lading is sucessfully finished (or before new load starts)? And - does this deletion do not destroy delta mechanism? Is the DSO replacing PSAfunctionally (i.e. PSA can be deleted every load as well)?
Usually a pass through layer is used to
1. Ensure data consistency
2. Possibly use Deltas
3. Additional transformations
In a write optimized DSo - the request ID is key and hence delta is based on request ID. If you do not have any additional transformations - then a Write optimized DSO is essentially like your PSA.
3. Query pruning
Does this happen automatically on DB level, or additional developments with exits variables, steering tables and FMs is required?
The query pruning - depends on the run based and cost based optimizers within the DB and not much control over how well you can influence the execution of a query other than havin up to date statistics , building aggregates etc etc.
4. DSOs for master data loads
What is the benefit of using full MD extraction and DSO delta insetad of MD delta extraction?
It depends more on the data volumes and also the number of transformation required...
If you have multiple levels of transformations - use a DSO or if you have very high data volumes and want to identify changed records - then use a DSO. -
Unable to convert sender service BPM_Name to an ALE logical System
Hello ,
While sending from BPM to R/3 ( IDOC) i am getting the following error :
"Unable to convert sender service <BPM_Name> to an ALE logical system"
Please kindly advice,
ReddyHi Bujji,
I just remembered that you have to maintain your adapter specific parameters for your business process. The side effect however is that you have to define the business process name as logical system in your receiving SAP system and that you have to maintain partner profile settings.
The answer to your question is there in this Blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
If the above solution doesnot work.....
You can also try this, don't enter the "adapter specific settings" on the Integration Process. Instead enter a "Header Mapping" Sender Service in the Receiver Agreement. this should be the real sending system.
When you enter "adapter specific settings" in a BPM, the receiving SAP systems ALE layer thinks the sending system is your BPM - using the method discussed here we are overriding that so that ALE see's that its communicating with the real sending system.
I hope it helps....
Regards,
Abhy
Message was edited by: Abhy Thomas
Maybe you are looking for
-
I'm running 10.4 server (currently 10.4.2 but I've had the same problems on 10.4.4 and 10.4.7) as an internet gateway and content filter. I'm running DNS, DHCP, NAT, Squid Proxy Server and Dan's Guardian content filter. Starting recently, I've been h
-
Buttons in ActionScript 3 ?!?!?!
hi... I'm trying to make a sound controller in actionscript 3. I used to do this nicely in actionscript 2, but know it seems that nothing works as in "the old days"... I created a button and tried to add actionscript to it but it doesn't let me :-( H
-
Custom print order in Address Book
HI all, I want to print an member List for my organization in address book with a Custom Sort Order. I don't know how to do it. Here is the thing: I made a contact list of the members of the organization so that I can have on File. Select my C
-
Is it possible to install lion on a partition of my iMac, and leave Leopard on the computer too.
I am curently running Leopard and would like to keep it on my iMac due to bits of installed software that I'd like to keep from becoming incompatible, but I'd also like to have OS X Lion on there too so that I can enjoy some of the benefits this has
-
Hi all, I am using FCP7. I have edited footage which I filmed on the JVC GY-HM100U. I brought it into FCP with the following info: Dimensions: 1440 x 1080 Codecs: XDCAM HD 108i50 (35 Mb/s VBR), Integer (Big Endian), Timecode I want to do two differen