Converting into mp4
what program is the best for converting the videos from another format to mp4... anyone knoww plz... help!
I wrote this in another post but it applies here so...
I found some great conversion software that works great for me and much faster than quicktime for macs. It's call PSP 2.1.3. It's meant for psp but will work. Just go to movies hit options and uncheck the use quicktime box. Than click the plus button and add the movie you want to convert. It will start right away. Then when it's done converting go to the PSP folder in My Documents and voilla your video is waiting. The only downside is that it screw up your file names. try It ou. You Can download it from http://www.nullriver.com/index/products/pspware
enjot and good luck
Similar Messages
-
When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...
I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.
-
Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.
If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.
-
Cannot import .flv movies that were converted into .mp4?
They are .MP4 and Imovie's site supports them?
So what happens? Imports but doesn't play? No sound or no video? Error message? Does Quicktime play the clips?
.mp4 files are MPEG-4 encoded, and iMovie and Quicktime in general can play such files. However, the MPEG-4 standard has different parts, and not all applications support the same parts. There might be some export options that you could play with when converting, or you could try to load it into another program on the Mac, like VisualHub or MPEG Streamclip, and re-export in a different way. -
How do I convert an .mp4 h.264 file into a simple Mpeg 2 file...
I've had Quicktime for quitesometime now.
I'been been through many QT versions but version 7 series, I think has problems.
I've been dl'ing .mp4 files, with h.264 codecs.
Quicktime plays them wonderfully but I'd like to put the movies on my media servers and stream them to my network dvd players(thin-clients).
They can stream mpeg 1 and 2 great, as well as Xvid, Divx, and even VOBs'.
I installed Quicktime 7 along time ago, and tried an export to many different data file formats. I would either get no video or no sound. I have just about every codec needed to do any conversion to Divx or Xvid.
I also installed 3ivx.
Can anyone tell me how something so simple can be so difficult? QuickTime, if it plays it, and shows that its capable of exporting to different formats, should be able to do the job.
Beleive me, I know what your thinking. I've going as far as formatting, reinstalling Windows XP Pro, Updating, etc many times just to try to re-encode these .mp4 files into something big, yes, a large RAW file. Something that can be easily converted into anything else such as the basic old Mpg 1 or 2 file...
Please, any help would be apprecaited!
NeuroPsycheI tried ffmpeg but it just doesn't seem like it does a very good job at converting. I dont know why, but I think its because the .mp4 file has 6.1 sound or that new acc codec.
I'm not sure about it, but when I do use ffmpeg, the sound doens't come out.
Thanks!
Dave.
QuickTime doesn't have the capability to export to
MPEG-1 or MPEG-2, at least not without third-party
codecs (and I'm not aware of any for Windows for
those formats, though there could be some somewhere).
You might want to take a look at the open-source ffmpeg which can
convert H.264 to MPEG-1 and MPEG-2 (as well as a
number of other formats).
Hope this helps. -
HT204382 How to convert VOB files into MP4 ? Tks
Hi, anyone knows how to convert VOB files into MP4 ones ?
Tkshttp://forums.macrumors.com/showthread.php?t=812985
The procedure is dated and I will assume that the DVD is not copy-protected since discussion of such things is verboten. -
How to convert Presenter PDF presentation into MP4?
Hi could someone please tell me how to convert a Presenter PDF presentation into MP4? To clarify, Presenter was used to create PDF presentations with voice over the powerpoint slides. I would like to take the PDFs and convert them to MP4s using Presenter or any other way. Would appreciate any assistance that could be provided.
Pardon my reply. This a.m. I studied the documents that transfered nicely after being passed through Acrobat Pro to MS Word and the ones that did not. Those that did were mostly black and white and the cells were not as complex. The ones that transferred but with bad formatting had cells in red, instructions in the margins, with some lettering in red but most lettering in black. Both the first set and the last set carried the suffix .pdf .
-
Trying to convert video in .MTS format to wok on Imovie. Doiwnloaded TotalVideo Converter Light. Tried converting it to Avi., .DV, .mp4, imovie, and then dragging to IMovieHd, but it doesn't accept it. nothing is working.
Frustrated, no format seems to work.
What should be best to convert into?miguelkavlin wrote:... dragging to IMovieHd, but it doesn't accept it. nothing is working.
iMovieHD means - in Apples officiall nomenclatura - vers 5. A very, very obsolete version...
is this really your version you're using?
(click in iMovie under File/about)
diff. versions, diff. advices... -
How to convert itunes mp4 to mp3
how to convert itunes mp4 to mp3
So I'm being exact. You cannot "convert" a video file (with audio), to audio only.
You can extract the audio, or record the audio into an audio programme etc. as a way of obtaining the audio only. But convert... no.
I answered the question. I also asked the OP to give further information, so that we could possibly provide a suitable solution. After all, as lllaass has suggested, perhaps the OP wants to make a ringtone. -
How to trace planned order data after it has been converted into production
Hi, There,
The planned order has been converted into production order.
However, I need to trace if this planned order is generated by MRP
run or created manually. I can't get any planned order info from
table PLAF. Any input?
Regards,
NancyHi,
Once fully converted, the Planned Order data will not be available in the Table : PLAF.
If it is available, then You can have the details with the Time Stamp and User data from PLAF.
But, the refrence will be available in the Production Order.
You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
This is how most of the Organizations keep a track of the Planned order data.
Hope this helps..
Regards,
Siva -
ALV QUANTITY field Geting converted into decimals ?
Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
SreeramHi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
ebeln TYPE ebeln,
ebelp TYPE ebelp,
ktmng TYPE ktmng,
menge TYPE bstmg,
END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " ADD_FIELDCAT
Regards,
Jovito -
ALV output converted into PDF format and send that PDF to user through mail
Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr LIKE zmsd_freight_hdr OCCURS 0 WITH HEADER LINE,
T_DET LIKE ZMSD_FREIGHT_DET OCCURS 0 WITH HEADER LINE,
t_bl LIKE zmsd_blinfo OCCURS 0 WITH HEADER LINE,
t_di LIKE zmsd_diheader OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
INCLUDE STRUCTURE zmsd_freight_det.
DATA type(30).
DATA: END OF t_det.
DATA: v_target2(30),
v_zsammg LIKE t_det-zsammg,
v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
zsammg LIKE zmsd_freight_hdr-zsammg,
zdidbl LIKE zmsd_freight_hdr-zdidbl,
zvkorg LIKE zmsd_freight_hdr-zvkorg,
zinvno LIKE zmsd_freight_hdr-zinvno,
zttlamt LIKE zmsd_freight_hdr-zttlamt,
zstatus LIKE zmsd_freight_hdr-zstatus,
ztype LIKE zmsd_freight_hdr-ztype,
zconfirm LIKE zmsd_freight_hdr-zconfirm,
zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
erdat LIKE zmsd_freight_hdr-erdat,
ernam LIKE zmsd_freight_hdr-ernam,
erzet LIKE zmsd_freight_hdr-erzet,
aedat(10),
aenam LIKE zmsd_freight_hdr-aenam,
aezet LIKE zmsd_freight_hdr-aezet,
zline LIKE zmsd_freight_det-zline,
zfptype LIKE zmsd_freight_det-zfptype,
zchrcode LIKE zmsd_freight_det-zchrcode,
zcurcode LIKE zmsd_freight_det-zcurcode,
zqty LIKE zmsd_freight_det-zqty,
zuom LIKE zmsd_freight_det-zuom,
zrate LIKE zmsd_freight_det-zrate,
zamount LIKE zmsd_freight_det-zamount,
zexrate LIKE zmsd_freight_det-zexrate,
zccode LIKE zmsd_blinfo-zccode, "MADK991565
zccode like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
zbldate(10),
zbl LIKE zmsd_blinfo-zbl,
type(3),
waerk LIKE zmsd_freight_det-zcurcode,
zamountl LIKE zmsd_freight_det-zamount,
END OF t_data.
DATA : w_layout TYPE slis_layout_alv,
w_catalog TYPE slis_fieldcat_alv,
t_catalog TYPE slis_t_fieldcat_alv,
w_sort TYPE slis_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv.
DATA V_ZINVNO like T_HDR-ZINVNO. "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl ,
s_zccode FOR lfa1-lifnr ,
s_status FOR zmsd_freight_hdr-zstatus ,
s_ztype FOR zmsd_freight_hdr-ztype ,
s_erdat FOR zmsd_freight_hdr-erdat ,
s_ernam FOR zmsd_freight_hdr-ernam ,
s_zconfd FOR zmsd_freight_hdr-zconfirmdate .
PARAMETERS : p_zconf AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS : p_hdr RADIOBUTTON GROUP rad DEFAULT 'X' ,
p_det RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT *
FROM zmsd_freight_hdr
INTO TABLE t_hdr
WHERE zvkorg EQ p_zvkorg
AND zdidbl IN s_zdidbl
AND zstatus IN s_status
AND ztype IN s_ztype
AND erdat IN s_erdat
AND ernam IN s_ernam
AND zconfirmdate IN s_zconfd
AND ZFCODE IN S_ZCCODE. "MADK991565
IF p_zconf = 'X'.
DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT *
FROM zmsd_blinfo
INTO TABLE t_bl
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT *
FROM zmsd_diheader
INTO TABLE t_di
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT *
FROM zmsd_freight_det
INTO TABLE t_det
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg
AND ZINVNO = T_HDR-ZINVNO . "MADK991565
SORT t_det BY zsammg zline. "MADK991565
SORT T_DET BY ZSAMMG ZINVNO ZLINE. "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal. "MADK933361
LOOP AT t_hdr.
Start of MADK933361
CLEAR: v_target2.
v_zsammg = t_hdr-zsammg.
V_ZINVNO = T_HDR-ZINVNO. "MADK991565
AT NEW zsammg. "MADK991565
AT NEW ZINVNO. "MADK991565
PERFORM get_gst_value.
ENDAT.
End of MADK933361
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
IF p_det = 'X'.
CSF Project Changes Starts DEV34 MADK985782
LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
zinvno = t_hdr-zinvno.
CSF Project Changes Ends DEV34 MADK985782
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
MOVE-CORRESPONDING t_det TO t_data.
t_data-zamountl = t_data-zamount * t_data-zexrate.
APPEND t_data.
CLEAR t_data.
ENDLOOP.
ELSE.
APPEND t_data.
CLEAR t_data.
ENDIF.
AT END OF zsammg.
CLEAR v_gsttotal.
ENDAT.
*Start of changes for IS090901289-PIA MADK991565
AT END OF ZINVNO.
CLEAR V_GSTTOTAL.
ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal. "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
IF NOT t_bl-zbldate IS INITIAL.
WRITE: t_bl-zbldate TO t_data-zbldate.
ENDIF.
t_data-zbl = t_bl-zbl.
t_data-type = 'DBL'.
ELSE.
READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_di-zdiforcode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
t_data-type = 'DI'.
ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
MESSAGE s398(00) WITH 'No Data Selected'.
EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_user_command = 'ALV_USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_catalog[]
i_grid_title = sy-title
i_save = 'A'
it_sort = t_sort[]
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL' 'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ELSE.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Freight Payment ' 'ZFPTYPE' '14' ' ' ' ',
'Charge Code ' 'ZCHRCODE' '10' ' ' ' ',
'Currency ' 'ZCURCODE' '08' ' ' ' ',
'Quantity ' 'ZQTY' '13' ' ' ' ',
'UoM ' 'ZUOM' '04' ' ' ' ',
'Rate ' 'ZRATE' '15' ' ' ' ',
'Amt(Foreign Curr)' 'ZAMOUNT' '16' ' ' ' ',
'Exchange Rate ' 'ZEXRATE' '13' ' ' ' ',
'Amt(Local Curr) ' 'ZAMOUNTL' '16' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ENDIF.
ENDFORM.
FORM af USING text
field
len
table
reffield.
v_count = v_count + 1.
w_catalog-col_pos = v_count.
w_catalog-fieldname = field.
w_catalog-ref_tabname = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s = text.
w_catalog-seltext_m = text.
w_catalog-seltext_l = text.
w_catalog-outputlen = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'WAERK'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'ZCURCODE'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
w_catalog-no_zero = 'X'.
w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf USING fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos = v_count.
w_sort-up = sortup.
w_sort-group = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm LIKE sy-ucomm
in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
CHECK NOT lfs_data-zdidbl IS INITIAL.
IF lfs_data-type = 'DBL'.
DATA: l_zdbl LIKE zmsd_diheader-zdinum.
l_zdbl = in_selfield-value.
EXPORT l_zdbl TO MEMORY ID 'VBL'.
CALL TRANSACTION 'ZMSD_BL01'.
ENDIF.
IF lfs_data-type = 'DI'.
DATA: v_dinum LIKE zmsd_diheader-zdinum.
v_dinum = in_selfield-value.
EXPORT v_dinum TO MEMORY ID 'VDI'.
CALL TRANSACTION 'ZMSD_DI01'.
ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
AND ZINVNO = V_ZINVNO. "MADK991565
CHECK t_data-zccode IN s_zccode.
t_det-zamount = t_det-zamount * t_det-zexrate.
SELECT SINGLE y0mmtarget2
INTO v_target2
FROM y0mmipstranslate
WHERE y0mmdatatype = '70' AND
y0mmsource = t_det-zchrcode.
SELECT SINGLE y0mmtarget1
INTO t_det-type
FROM y0mmipstranslate
WHERE y0mmdatatype = '76' AND
y0mmsource = v_target2.
IF t_det-type NE '3Z'.
v_gsttotal = v_gsttotal +
( t_det-zamount * 5 / 100 ).
ENDIF.
ENDLOOP.
Regards,
Raj.Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> u20180000000000u2032
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM -
How to store the output of a analog to digital converter into an 2D array
Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT. -
Excise invoice not getting converted into INR from USD for an IMPORT PO
Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20 USD
Custome - 204.20 USD
CVD - 179.54 USD
Cess on CVD 3.59 USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED - 179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .-- MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight - MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta -
HT3529 SMS sent to multiple contacts were converted into mms.
SMS sent to multiple contacts were converted into mms, text only 61 characters long including spaces. Carrier O2 have said it is an known issue with apple products. This has cost me £50 to say happy new year to my family and friends. Anyone know of this issue with iPhone. Called into apple store who were unaware of this? Everyone blaming each other as usual! Can't see in term and conditions for O2 or apple that this would happen. The message is stored on the phone as a text message! Thanks
Thanks Tim, apple say the same thing, carrier's method of handling multiple SMS creates this issue, can't see anywhere which alerts the customer to this on terms and conditions so back to O2 it is then!
Maybe you are looking for
-
Vendor liabilities customised aging report
Dear Experts, My client needed Vendor Liabilities Report month wise for 12 Months as system Vendor Liabilities Aging report show only four months reports and rest of in cumulative bal. so client was needed a report in for almost 12 months criteria a
-
Cost Center Field on Billable Sales Orders
On the Sales Header>Account Assignment tab of a sales order the Cost Center field allow entries. We use this for free order, but do not want it used for billable, and we have trouble from time to time with users entering in a Cost Center, thinking t
-
Mac Mail/iPhone mail conflict or locking issue
Greetings! I recently an iPhone. I previously was using a Pearl with RIM's BIS setup to access my email (verizon/yahoo POP3 acct). Since I moved to the iPhone, I've noticed whenever it accesses my email account, the Mac Mail displays the pop-up windo
-
Trouble with iTunes loading on my mac running OSX 10.9.2
Lately every time I go to load iTunes, I get a "not Responding" causing me to Force Quit. It seems crazy that this should be a recurring problem. I diligently update everytime something shows up as available. I am getting tired of seeing the "color w
-
Essmsh error: Parse error near on
Hi, I have encryted a mxl file which loads dimensions in essbase. When I try to call the maxl file, import statments thows an error "essmsh error: Parse error near on". Rest of the statments work fine. Also the import statments in the original maxl f