Converting Karaoke to CD+g to Run in iTunes/kTunes

The programmer for kTunes claims the STOCK CD drive on my iMac G5 (MATSHITA DVD-R UJ-825) is not a compatable drive to load for CD+G in kTunes.
1.Therefore what stand alone drive can anyone recomend.
or
2. Is it possible to use a portable karaoke machine (mine is a CAVS DVD-203G) to load into kTunes or iTunes in readable format? if so how?

mrwheels -
The iMic is not required if you have an audio input on your Mac (sounds like you do), and amplifier (stereo receiver with phono input), which it also sounds like you have. What is needed that is not included is software to record the input. I would suggest 3 options:
1. Garageband can do this, as far as I know, although I have never used it for this purpose. Import into iTunes where you can name tracks and provide other info and collect the tracks into a playlist (album) and burn to CD.
2. Audacity is a free audio recording and editing program. Again, I've never used it, but have read many positive reviews from those who have. Once again, import resulting file into iTunes for tagging and burning.
3. SoundStudio is another piece of software that allows for recording and editing. This one, I use! A bit pricey now, but I've used it for 5 or more years, with great results, for a variety of audio recording and editing tasks. I record an album side as a single file and split it up into tracks, clean up big pops and clicks, save as AIFF, import those into iTunes and burn as a CD, then compress the AIFF into 160 kbps AAC and delete the AIFF from my hard drive.
Hope this helps. Good luck!
Darth
15 Al PB 1.5 Ghz G4, Snow iMac 500 Mhz G3   Mac OS X (10.4.6)   1.25 GHz Powermac G4 MDD at work

Similar Messages

  • Converted access app to apex when run get no data found; table does have da

    COnverfted MS Access app to apex. WHen I run the appliation I get no data found.
    However the table does have data. HOw do I see what is actually running?
    The pre-converted form saids its based on a query. The form and the query shows up as valid. I then converted the form. When I run it I get no data found. If I take the query that the form is based on and run in sqlplus I get data.
    Another confusing thing is when I look at the page for the converted form, there is nothing in the source area for the region where the converted query results should be.
    Did the conversion not work? How can I tell what is the source? Where should the results from the query be located?

    Its a standard SQL query:
    SELECT xtbl_MSDS_to_CAS.msds_id,
    xtbl_MSDS_to_CAS.cas,
    xtbl_MSDS_to_CAS.alias,
    xtbl_MSDS_to_CAS.amount,
    xtbl_MSDS_to_CAS.veh_prod,
    xtbl_MSDS_to_CAS.compliance
    FROM xtbl_MSDS_to_CAS
    The name of the above query lets say for example purposes is MYQUERY.
    After looking at the page def I see that the way the conversion tool worked is that in the page definition it has this in the Processes Section:
    After Header:
    Fetch Row from MYQUERY.
    Then it says automated Row fetch.
    I compared this to another form that was converted thru the migration APex tool as well and on that form that does work I found that:
    The query(form) was converted and placed in a region and the source has the query. THat is, it was not in the process section but in the region: source section.
    So why does the conversion tool decide to convert one and populate as a region source and the other as a process in the page definition?
    THis is all very confusing.
    Hope you were able to follow me.

  • Convertion of PO to requirement for running MRP

    Dear all,
    There is one Plant which creates purchase order and tranfer to another Plant. In the receiving plant the PO will automatically converted as requirement and they will run MRP for that plant.
    Please explain me how to convert PO to requirement to run MRP?
    Thanks and Regds
    Sridhara K N

    Hi,
    plantA - needs the material from plantB
    plantB - buys the material and sens it to plantA
    One possible process:
    1. PlantA creates a STO
    2. PlantA's STO generates requirement in plantB
    3. PlantB runs MRP > creates procurement proposal for the requirement (PR)
    4. PlantB converts the PR to PO
    5. PlantB receives the goods from its supplier (GR against PlantB's PO)
    6. PlantB sends the goods to plantA (GI from plantB)
    7. PlantA receives the goods against STO (GR)
    Of course, based on your organisational strucure (purchasing organisation) you can order the goods directly from plantA...
    Regards,
    Csaba

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

    After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
    this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
    If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
    My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
    *Will add & remove totally uninstall Itunes so that I can reinstall?
    *Will I lose my apps, music & data?
    *If the apps, music & data is recoverable, how do I do that?
    Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

    dorygirl2009 wrote:
    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
    This "smart friend" really sounds like a collosal moron.
    Follow the instructions here: http://support.apple.com/kb/HT1925  to remove and reinstall all Apple products on your computer.
    Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****! 
    None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

  • This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

    This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
    I keep getting the above error everytime I plug in my iphone.
    I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
    After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
    It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
    Has anybody had this problem? Please can somebody tell me how to fix it!
    Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

    Is there a way to install this on its own?
    Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
    Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Can I convert an apple store gift card into a itunes gift card

    Can I convert an apple store gift card into a itunes gift card. I bought the wrong one.

    Hey Carterc25, I have been dealing with the same issue this morning... I've talked to the senior adviser of Applecare and "Bruce" told me the only way to convert apple gift card to itunes is by physically going to an Apple Retail Store and buy an Itunes gift card. Many people don't understand the difference between "apple" and "itunes" in gift cards so it is only obvious more people will fall victim to scheme. My advice is DO NOT BUY APPLE GIFT CARD.
    Another reason to ditch Apple and be a Microsoft customer. #Microsoftisbetterthanapple

  • I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

    I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
    Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
    Please advise what should I do to fix this.

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

    I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1,  64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB .  I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes.  I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes"  In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?"  Wth...i am using the 64version.

    Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?"  Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.

    wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that  didn't get installed with the itunes setup.

  • HT4623 latest iTunes will not recognize new iPod. i get message "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." 64 bit version of iTunes is inst

    I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!

    (apologies for barging in, lllass.)
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices

    I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices. Help please

    The ipod is not a backup/storage device.
    You need to copy everything from your old computer to your new one.
    The Apple store will do this for you,  you can call apple support and they will help you, you can use google.

Maybe you are looking for

  • Serial command not working in Labview, but it works in docklight

    I am trying to run a RGA via labview. I can control the RGA via docklight (see attachment), but when I try to give the same command to labview, I do not get a responce. What is going wrong? What do I mis in the VI? Best regards, Rens Solved! Go to So

  • Problem with cross

    hey there, i have a problem with a cross for two sequences. in a earlier cross the is the cross between the scenes. at my problem here the cross is only in the second part of those scenes. there is no possibility to put it between both scenes. i´ve l

  • Please no jakarta-commons-collections-3.1.jar in Kodo 3.2!!

    As far as I know jakarta-commons-collections-3.1.jar is not backward compatible with 2.x version of jakarta collections. Many things (such as Struts) are shipped with collections 2.1 and might not work with 3.1 collections. Is it possible to keep 2.1

  • 100% width and 100% height slideshow in Muse

    Hi, In Muse is it possible have a  slideshow that maintains full 100% width image but increases the slideshow height as the browser width is increased? In other words, I would like the slide show image to be say 1000px x 500px but if the viewer pulls

  • Just updated to Mavericks and can't open spread sheets in numbers

    Just updated to Mavericks and can't opean spread sheets, says I must update numbers but numbers is already updated?