Converting legacy type on a path
Why won't Illustrator type on a path convert properly in CS5?
Path type on a circle is shifted and almost impossible to bring back to the
original location.
www.moderngraphicsusa.com (http://www.moderngraphicsusa.com/)
HOURS: 7:00 A.M. TO 4:00 P.M. Monday through Friday
Now offering ECO friendly, short run, digital UV printing directly to most
common sign and display materials, call or e-mail for more information.
Use the link below to send files too large for conventional e-mail.
https://dropbox.yousendit.com/mgsi (https://dropbox.yousendit.com/mgsi)
Jim Sommer
Modern Graphic Systems, Inc.
4922 S. Western Ave.
Chicago, IL 60609
(773) 476-6898 FAX (773) 476-7553
****************PLEASE NOTE****************
If this correspondence contains proofs for your review and approval, you
must respond via e-mail indicating that the job has been approved. All
unique images contained in the proofs will remain our property until the art
preparation charge is paid in full and must not be used for any further
reproduction.
We normally do not print out a hard copy for ourselves until you approve
the job.
If changes are required, print out the proofs, mark up the
changes/corrections and FAX back. You will receive a final proof as soon as
changes/corrections have been completed.
We will consider these proofs active for a period of 10 days. After this
time the file will be closed out and you will be responsible for charges
incurred to this point.
In a message dated 1/9/2012 4:00:17 P.M. Central Standard Time,
[email protected] writes:
Re: Converting legacy type on a path
created by Monika Gause (http://forums.adobe.com/people/Monika+Gause) in
Illustrator - View the full discussion
(http://forums.adobe.com/message/4127330#4127330)
Similar Messages
-
Cannot convert ÿØÿà of type class java.lang.String to class BFileDomain.
Hi All,
I am using Jdeveloper 11.1.2.3.0.
I have a scenario of making an ADF page where I have a IMAGE field to show on the page. So,I have a table called "PRODUCT" with fields called photo with BFILE type. Now when I the data i have inserted using the DML command and i can see the path at the backend.
However,when i am runnig my ADF page in the Filed called "PHOTO" I can only see a junk character stating 'yoyo'.
When I click on it, it says ERROR "Cannot convert ÿØÿà of type class java.lang.String to class oracle.jbo.domain.BFileDomain".
Your help will be appreciated ASAP.
Regards,
ShahnawazHi,
did you show the id-value in the user interface as a input-component, and did the input-component include a converter?
If yes, show the id as output-text and remove any existing converter-components.
Best Regards -
I'm trying to type on a path that started out as a letter and I've now converted to outlines, yet it's telling me "you must click on a non-compound, non-masking path to create text along a path" when I try.
Why is that happening? What can I do to resolve the problem? Thanks.Hi
Try this:
Make a copy of your letter-shape to the clipboard (you'll need it later)
Ungroup (shift-cmd-G/shift-ctrl-G)
Right-clcik and select "Release Compound Path"
Add your text to the path (which should vanish)
Paste in front the original letter-shape -
Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?
Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha -
Error converting data type nvarchar to numeric 'witholding tax' (OWHT)
Hi Guys.
After I have upgraded my clients 2007 PL 30 database to 8.81 PL05, and running a repair to fix inconsistincies, I am receiveing some error when opening any sales documents.
It takes place when I open a sales document, or browse previous docs. When browsing previous docs, it onlly happens on some of them.
I also receive a different error when viewing sales orders: Error converting data type nvarchar to numeric (CRD2).
Any ideas how to fix it?
It does not limit me from processing and using the rest of the functionality. All calculations with queries in the docs are still working.
Thanks.Hi,
Please check Note No. : 1402855 and see if the same applied to the issue mentioned by you.
Kind Regards,
Jitin
SAP Business One Forum Team -
Im getting an error when running a procedure that includes this code.
I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
DECLARE @retval AS DECIMAL(12,2)
DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
DECLARE @sqlcmd AS NVARCHAR(150)
DECLARE @paramdef NVARCHAR(150)
SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
--default
SET @retval = 0.0;
EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
SELECT @retval
DECLARE @return_value DECIMAL(12,2)
EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
@SpreadKey = 1,
@MonthNumber = 4
SELECT 'Return Value' = @return_value
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
the shoe size, the phone number or something else at run time of this entity.
In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point.
Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity.
Do you know that SQL is a declarative language? This family of languages does not use local variables!
Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.
Think about how silly this is:
SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental.
We need to see the DDL so we can re-write this mess. Want to fix it or not?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Crystal Data Conversion Issue (Error converting data type varchar to datetime)
Hi,
I can run stored procedure without error in SQL Server using my personal credentials as well as database credentials.
I can also run Crystal Report after connecting to Stored procedure without error on my desktop using my personal credentials as well as database credentials.
But when I upload the crystal report in BOBJDEV and when I run using database credentials report fails saying that "Error in File ~tmp1d1480b8e70fd90.rpt: Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 18456 ]" but I can run the crystal report successfully on BOBJDEV using my personal credentials.
I googled (Data Conversion Error Message) about this issue & lot of people asked to do "Verify Database" in Crystal Report. So I did that, but when I do it I am getting a error message like this:
Error converting data type varchar to datetime.
Where do you think the error might be occurring? Did anyone faced this kind of issue before? If so, how to resolve it?
(FYI, I am using Crystal Reports 2008, & for stored procedure I have used SSMS 2012 )
Please help me with this issue.
Thanks & Regards.
Naveen.hello Naveen,
since the report works fine in the cr designer / desktop, we need to figure out where you should post this question.
by bobjdev do you mean businessobjects enterprise or crystal reports server? if so please post this question to the bi platform space.
-jamie -
Field UMSA1 cannot be converted in type CURR - long Text
Hi All,
I am getting the following error
Error records written to application log
Error in an arithmetic operation in record 489
Record 489:Contents 四川省长江滥曝扇备总 from field UMSA1 cannot
Record 489 :Contents 四川省长江滥曝扇备总 from field UMSA1 cannot be converted in type CURR ->lo
This happened for the customized master data Z********(customer number). Data source; 0CUSTOMER_ATTR
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
Out of 5 data packages, I could find only 3 data packages in PSA which are successful, the remaining had error and could not be found in PSA. Checked in R/3 but could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
The UMSA1 field in data source 0CUSTOMER_ATTR in BW.
Data Type: CURR, Length: 15, Decimal: 2, curr/unit: UWAER
The UMSA1 field in R/3
Data Type: CURR, Length: 15, Decimal: 2
Request your timely suggestions.
RajDear Veerandra,
I have already checked in R/3 as you had mentioned. But as I said earlier, could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
3. Error Handling option.
Regards.
Raj -
Converting CHAR type to other data types
Dear SDN users,
would any of you know how to convert a CHAR data type to other data types for example hexadecimal etc., and convert them back? I suspect there must be some standard FMs available.
Thankyou for your responses.
Regards,
SmithaHello smitha ,
I suppose you are assigning some variable of char type to a variable of integer type it will automaticaly (implicitly ) convert the type .
in some case we need to change the type explicitly like the above mentiioned .
Thanks and regards ..
Priyank -
Hi,
As you'll see in the attached screenshot, I wanted to type along a path that mimmicks the marquee in the photo that is in the background. I was able to get it to do that pretty easily by just drawing the path, type on a path and then type on a path options/skew. The only slight thing is that the last couple of words start to curve back out when I want them stay against the marquee rail.
Is there a way to warp it in InDesign?
Or would it be easier to do this in another program?
Thanks!Well I would likely build this in AI or another application.
At both ends of the line, try curving them down slightly. The marquee itself shows a slight outward splay, and if you followed it too closely then that may be what is affecting the ends of the line.
Mike -
Is there a way to keep the color on a shape when you use Type on a Path without making a new fill in the Appearance panel?
ThanksAwesome.
I suppose I could just duplicate the layer then, and type on that. Then group.
Ctrl C, Ctrl F, type, select both layers, then Ctrl G
Good enough.
Thanks ! -
I know you can only work with one path at a time, but is there anyway to create type on a path that stretches each letter as the word goes on? Basically, The bottom arc drops sharper than the top arc, but I would like to type to stretch proportionally to the top arc... does this make sense anyone?
If I wanted the type to follow the first brown scroll (so it would start in the green that fades to white) but I want the top to stretch to the upper brown images of people with their arms up...
-
Often I accidently click on the edge of a text box with the type on a path tool. How can I reverse that and remove the position lines and stuff that show up?
with Your text box selected, go to Type > Type on a Path > Delete Type from Path
-
Create type on a path (circle)
Does anyone knows how to create type on a path (circle) so the first line of text flows on the top and the second line on the bottom?
Thanks!
Wisinehttp://indesignsecrets.com/quickly-add-type-to-top-and-bottom-of-an-ellipse.php
Bob -
Is there a way to disable this function?
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Anyone know of a way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?There is no good way to disable type on the path tool. There should be, it should be a separate subtool that never comes up automatically, or at least a setting to make it behave like that. Most instances of its usage are accidental.
Stopgap solutions involve locking or hiding objects, making sure your text objects are on top, and working more zoomed in than you want to.
Maybe you are looking for
-
IPad Accessory no longer working since ios7.1
Hello, I have been using Philips Car TV's to connect to my iPad2 (http://www.usa.philips.com/content/B2C/en_US/product-catalog/PV9002I_37.html). It was working fine until I upgraded to ios7.1. Before I was able to mirror any video to the 9inch TV's b
-
Speakers not recognized during te
Hello, I have a X-Fi XtremeMusic soundcard and Klipsch 5. Promedia setup for my computer. I recently moved, and when I reassembled my computer & speaker system the rear speakers were not responding when I tested them in both the THX setup as well as
-
Firefox double or triple boots before opening
Application Basics Name Firefox Version 3.6.10 Profile Directory Show in Finder Installed Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Adblock Plus 1.2.2 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d} Do
-
I watched the first 11 minutes of a movie, paused and then when I tried to play again recieved the error - An error occurred loading this content. try again later. No amount of retrying later fixed the problem. I will not be able to finish watching
-
Cant we use BADI_SD_BILLING
Hi Experts I am trying to implement BADI_SD_BILLING in SE19, but it says error, BADI definition BADI_SD_BILLING in only provided for SAP internal use. Cant we implemnt this BADI, whats the reason how to use it. regards Rajaram