Converting .logic (logic 9) files to .lso (for use in Logic Express 7)

Does anyone know if this is possible?
Or, is it possible to save files in 9 as v7 projects, much in the way you can do a "save as" Excel 97 spreadsheet while in Excel 2011. You lose things in the deal, but you can do it.
Thanks

Tweek-ie wrote:
...is it possible to save files in 9 as v7 projects,
AFAIK... The simple answer is No.
Once a ' song/project/creation ' has been saved and/or created in a Later Version, it cannot be, successfully, Opened in an Earlier Version...

Similar Messages

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
Ed

Well, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version.

Converting video to swf files in flash for breeze

Hello,
I am using Adobe Premiere Pro 2 and wanted to know what the
best video codec and audio codec to use when I export to create a
video file to insert into flash to convert to a swf file for
breeze? I am having trouble with the audio, must I demux it first
before I put into Flash? Or is there a audio codec that I can use
in Premiere so I don't have to demux the audio?
Also, when I insert a swf file in breeze plug-in for PPT, it
does not play the video or give me the controll by presentation
playbar I checked off. Not sure what I'm doing wrong, could use
some help, thanks.

billcorrigan schrieb:
> Jerich0, I tried this and when I publish it, the swf
opens a connection to the
> server, and starts streaming but nothing happens. Just a
blank movie.
>
> The content is at (FLV):
>
>
http://breeze.extn.washington.edu/p45023528/
>
> and the swf is at
>
>
http://breeze.extn.washington.edu/p17629788/
>
> I created the swf by creating a new document in Flash 8,
selected components,
> edited the infomation in media player and saved the
file.
>
> any suggestions?
>
hi,
if you work with the player component the .flv is not
embedded in the
swf. In Breeze you can only insert a single flash file I
suppose, so the
attached .flv file won't show up.
Kathrin

Converting RM files (Real Video) for use in iMovie

Hello,
I'm looking for a program that can help me convert RM (real video) files for use with iMovie.
I have heard that ffmpegX is great to use. I went to their website, downloaded everything and got it up and running...but when I try to convert anything, it doesn't work. I'm wondering what I'm doing wrong?
Any advice? Thanks.

Yes
I found a program but am experiencing lots of trouble with it. I was hoping that others could give me a better suggestion.
I've actually downloaded and installed ffmpeg but the problem I'm experiencing now is that the videos do not convert. The program starts to work and then three seconds later I get the dialog box that says everything has been converted but the file created is 0KB and of course will not open.
Any ideas about what could be going wrong? I've attempted to convert the files to different formats and try converting different files as well. I still have the problem.

Unable to convert file to PDF for using in Microsoft Word.

I purchased Convert file to PDF $19.99. After several attempts it will not do anything other than "Converting file to Word using Adobe Export PDF online" This keeps going up to 20 mins. Still nothing happens. Could anyone help.

Hi TheaCloneWindsong,
Do you face this issue with any particular pdf file or any pdf you wish to convert via Export PDF?

Just updated to CC 2014. Interested in best practice recommendations for converting INDD hi-resolution print layout files to .jpeg for use on a portfolio preview website

Seeking recommendations for best practices for converting hi-res magazine INDD docs to .jpgs for web portfolio

Export to a hi-res PDF, then do your conversion in Photoshop where you have more control.

Convert PS to PDF file in Adobe Distiller using javascript

Hi scripters,
I have created some PS files from Indesign using javascript. Files are d:\test\1.ps,2.ps
Now I want to convert this ps files into pdf files uisng javascript?(I am not comfort to use export as PDF option for this job)
how I can do this?
Thanks in advance
regards
a r u l

Hi arul
Firstable, you may not need to create PS files as Indesign is able to produce PDF files natively. I was told that it was more reliable to do so using a certification profile such as PDFX.
You will find a lot of PDF export script everywhere.
However, if you want to go that way (PS to PDF). I did that once.
First you determine into distiller a hotfolder where you ps files wille be generated. Then in the hotfolder options, you precise the profile you want to use. Otherwise, distiller may be using low quality PDF as default and your PDF may not be as good as you want.
var distiller = File("c:/xxx/yyy/zzz/distiller.exe"); //the path to your distiller app.
distiller.execute();
Here you are !
Loic

How do I export my library of Raw files to jpegs for use in a windows system?

So we just returned from vacation in Belize and I have over 1300 raw images in an aperture library. I need to export all of these images in jpeg format, onto a flash drive, so my wife can easily view them on her windows machine. How can I do this?

File -> Export and select an Export Preset (or create one for your preferred spec) and export to a folder on the desktop.
Regards
TD

Converting ISO20022 XML Payment file to PAYEXT iDoc using PI 7.1

Hi All,
As per my requirement : R/3 generates ISO20022 XML Payment file . PI will pick the file and converts into PAYEXT Idoc and send back to the same R/3.
I have some doubts regarding this...
1)Is ISO20022 XML Payment file also like normal xml file in R/3 OR different.
2) Can we use file adapter to pick the file.
3)Any modules required in CC.
4)Can I go with normal file to Idoc scenario.
Thanks
Drumi

solved

How do I convert MPG to a file that I can use in iMovie?

I have read a lot of ideas on here and some of them are beyond my knowledge of how to get it done. I don't want to have to buy a converter as I have seen this converter is built into Lion. Any help would be greatly appreciated.
Thanks

Do you mean MP3?
If so try importing the file into iTunes or Garageband.
If you go to iMovie help and type in "add a sound clip" there are steps to do this

Best compression for exporting large files from iMovie for use in iDVD?

I have a doco that I've made as separate projects too slow to make it all in one project - which I then exported as Quicktime .mov files. When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed.
What would be the best compression to apply to the large .mov files but reduce the overall file sizes by say 10%
Its sometimes taking up to 6 hours to render each project average total screentime per project is about 70 minutes and each project file size ranges from 1 to 6GB...
I feel like I'm a little out of my depth on this one!
Any suggestions for this dilemma?
Thanks
Tony

When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed... Any suggestions for this dilemma?
Not sure if your 4.7GB reference is for the source files or the resulting "muxed" MPEG2/PCM encoded content. In any case a single layer DVD is limited to 4.7 GBs of total content. To be safe, this usually means you are limited to 4.2 to 4.3 GB of encoded movie and/or slideshow content depending on how many and what type of menus you are creating created. Thus, if you are encoding for a single-layer DVD and your project encoded content exceeds the capacity of your DVD, then this would likely explain your problem.
If your project size reference is for the source content being added to your iDVD project, then it is totally irrelevant and you need to concentrate on the total duration of your iDVD and the method of encoding instead of file size. Basically, for a single-layer DVD, only about 60 minutes content can be encoded using the "Best Performance" encode option, 90 minutes using the "High Quality" setting, or 2 hours in the "Professional Quality" encode mode. Thus, if your content duration exceeds the capacity of your encoding mode here, it would likely explain your problem.
In either case, the solution would be to either burn to higher capacity optical media/higher capacity encoding mode or burn your content to multiple DVDs as individual projects at the current media capacity/encoding mode.

Change avi file to mov. for use with nuvj video mixer

I have avi. files on my hard drive c that come up on quicktime. I choose "file", export to quicktime, Ichoose options and choose jpeg which is the recomendation of nuvj (they require mov.jpeg files to play music videos). But when I try to play them they only run for 2 seconds with only the player showing. I am new at this any help will be greatly appreciated!!

This may assist:
http://www.divx.com/divx/mac/?hp3macmoreinfo

Proxy.pac file not working for using proxy for selected websites

After changing my ISP, i cant connect to Bluenest.org directly but with proxy. I can also connect by setting manual proxy server for all websites. But I dont want to do that as there is a bit security problem. I just wrote Proxy.pac files to use proxy sever for that particular website & put its location on Automatic Proxy Configuration. But its not working. I va tried with two types of .pac files. Given the code of the files below.....
First one..........
<pre><nowiki>
function FindProxyForURL(url, host)
if (shExpMatch(url, "http://bluenest.org") || localHostOrDomainIs(host, "http://www.bluenest.org"))
return "PROXY 204.45.138.4:80";
else
return "DIRECT";
</nowiki></pre>
Second one......
<pre><nowiki>function FindProxyForURL(url, host)
if(!isResolvable(host))
return "DIRECT";
return "PROXY 204.45.138.4:80";
}</nowiki></pre>
but none of them working. Please help.
Can you please tell which proxy server is fastest & safest.
Thanx in advance

I submitted a bug report to Apple. The problem is present since 10.9.2, now with 10.10 and iOS. I hope they will take this problem seriously.

How to convert a .jsp to a .java/.class for use in pplcode

.

At first , thanks for your help ,armalcolm
But I don't understand how to convert java string array to c string(char)array.I have seen the doc. , but I don't understand still.
Belown is my code
<code>
JNIEXPORT void JNICALL Java_init
(JNIEnv *env, jobject jobj, jobjectArray jfilename, jint jlength)
     jobject obj = env->NewObject(env,mid,param);
     jobjectArray obj_java = (jobjectArray)env->CallObjectMethod(obj,mid,param);
     length = jlength;
     filename = (char**) malloc(length * sizeof(char*));
     for (i=0;i<length;i++)
          jstring jstr = env->(jstring) GetObjectArray(obj_java,i);
          filename[i] = (char*) malloc(strlen(jstr)+1);
          strcpy(filename,GetStringUTFChars(jstr,0));
</code>
I know this is a error codes.Can you help me??
I don't know how to use NewObject() , CallObjectMethod() and GetObjectArray() method
Thanks

File size limit for using Filter Gallery

I created a large single layer file with dimensions of approximately 300cm x 200cm at 300dpi; the file size was about 2.5Gb. I wanted to use Filter Gallery but it was greyed out, even although it was only an 8-bit file. So, I reduced the file size to approximately 200cm x 135cm at 300dpi; the file size was about 1.5Gb. I could then use Filter Gallery.
My question is this: was the limit in the first place due to a maximum file size that Filter Gallery can handle (hope not) or, was the limit related to the avaialable memory on my computer (3gb RAM, NVidea card with 250Mb Graphics memory, 195Gb free on HD) ??
Couldn't find an answer to this in the wiki-faq-knowledge-base-forum and chat support didn't know ... will contact them again soon and update this discussion if I get a viable response.
Thank you, Trimmer

Filter Gallery does not work at all over 30000 pixels in either dimension.
Many of the filters have size limits well below that, due to the math or algorithms involved.
I should also point out that the pixel size limits are completely unrelated to file size.
And you really need more RAM if you are going to edit images like that.

Converting .logic (logic 9) files to .lso (for use in Logic Express 7)

Similar Messages

Maybe you are looking for