Converting movie for use in FCP

O Nobleissimos!
I exported some movies from TheMovies animation game and want to optimize their use in FCP. Tho I can open in QT, I can't in FCP. Using MPEG Streamclip I want to export to an appropriate format. What I wind up with from The Movies is:
Format: H.264. 1280x720, Millions
AAC, 2 Channels, 44100 kHz
FPS: 20
I see my best options for exporting as Apple DVCPRO HD 720p60, Apple HDV 720p30 or Apple HDV 720p60; OR match my Canon HV20's HDV 1080i60, some footage of which I'll be using. Or maybe another codec?
By using the 720 format in my sequence the animation will be at 100% and I can actually zoom in a bit with my Canon footage creating some flexibility in editing.
Therefor, for video I think maybe I should use the HDV 720p30.
For 'sound' I would choose either Auto or 48kHz, probably 48kHz since auto might just keep the 44.1kHz.
Since the above is progressive I will uncheck 'Interlaced Scaling'.
If you have any tips, or see a better way, plese post.
Thanks!

Ha! That is funny!
MPEG was quick on that batch, too. (my first time.)
And smart move with those little cams, following guys with cams does sound dangerous. Reminds me whenever I see shows of guys struggling and whining as they climb Everest or whatever, I always think, "Yea, and what about the cameraman." Those guys must be supermen!
Top of the mornin' to yuh, bud!

Similar Messages

Converting movie for use in FCP - Cont.

Hi--Thanks for the answers yesterday, but now I have another, or two.
I used MPEG Streamclip choosing ProRes (LT) to convert an animation file that was 20fps. Opening the ProRes version in QT I see it is still 20fps. Ok, so I guess I should have chosen the frame rate in MPEG. But for reference I made another movie using HDV 720p30, but I see it is still 20fps. Why doesn't it change it to 30fps since it is HDV 720p30? I guess I always need to choose frame rate.
So using the ProRes (LT) I will choose frame rate 30 and assuming all ProRes codecs are progressive I will uncheck 'Interlace Scaling'.
Now, in FCP's sequence I will be using these ProRes files of the animation and some footage from my Canon HV20 which is 1080i60. I want to keep the animation at 100%. So is a sequence setting of DVCPRO HD 720p30 the best choice?
Sorry if this is a bit confusing, but then I am a bit confused.
Thanks, you all have been great!

Hi again Elmer,
looks like that when I tune in you are around too:-)
yep I am slightly confused, however, try to convert everything into one editing format like ProRes including your HDV material, it appears that you can easily avoid using multiple formats in the timeline. A ProRes timeline should get you sorted.
L.

Converting Movie for use on iPod

I bought a movie on iTunes the other day. The movie plays fine on my computer and on the AppleTV. But it will not sync to my iPod Touch or iPhone.
When I tried to convert the Movie by using File -> Create New Version -> Create iPod or iPhone Version. I only got an error message: Error occured while converting the file "<Movie Name>". an unknown error occurred (-4).
Any suggestion on the meaning of the error and how to correct it?

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(26235)

Convert vob files for use in FCP X

I need to convert VOB files for use in FCP X on my macbookpro in OS X Lion (10.7.5) I use Clipwrap to convert other formats, but it does not seem to accept VOB for conversion (or if it does, I have not figured out how). In searching the web, I've come across several products that tout themselves as the best, fastest, easiest VOB to Prores converters etc., some that advertise as "free" when actually only a watermarked trial version is free. I have no idea of the actual quality of any of these (some examples are Brorsoft video converter for Mac, and Acrok HD Video Converter...), and would like some input from folks w/ experience in these things before dropping $ on the problem.
In another thread on this site I read something about MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing and I couldn't tell if it applied to my situation or not...
Thanks in advance for any light anyone can shed.

Midnighttrain wrote:
… MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html

Capturing Computer Monitor video for use in FCP project.

I'm working on an industrial film for a company that makes websites, and they want to put in video clips of their websites. I'm looking for a good program that will allow me to capture my desktop and make FCP ready videos. It doesn't need to be free, it just needs to do what I need. I'm also looking for the right settings to set for those movies for use in a standard DV NTSC project.
Thanks in advance!
-Steve!
MacBook Pro 2.16 Intel Core Duo Mac OS X (10.4.9)

Snapz pro from ambrosia software.
http://www.ambrosiasw.com/utilities/snapzprox/
x

To what resolution I need convert movie for Iphone?

Hi
To what resolution I need convert movie for Iphone? I have many option and don't know what resolution I need to choose? What is h264? I use joboshare.com software. Thanks.

Edulinka wrote:
Cant figure it out how it is working.
How do you mean? I wonder if the XP version is the same as the Mac version. I think as a default Handbrake will respect the aspect ratio. It's only the quality you need to decide on.

Can Indesign CS5 convert files for use on Kindle?

Hello,
Have any of you converted books for use on Kindle, and if so, how did you do it, and did it go smoothly? Please explain in "dummies" terms, as I find this topic to be very confusing.
If I convert files to ePub format in Ind. CS5, is this all I need to do to convert it to a format that can be used on a Kindle reader? Would this work for graphics as well as text?
Internet searches about this gave info for an older version, CS4, and seemed to require using supplemental software to successfully convert to Kindle format.
Thanks for any advice.
L

Yes, going to EPUB and then Kindle seems to be the best route.
A few suggestions.
1.       Upgrade to CS6. EPUB capabilities have been dramatically improved.
2.       Buy some good books EPUB. I suggest these two Liz Castro’s books for a start: http://amzn.to/LI9Q5b and http://amzn.to/LIa38o
3.       Visit Liz’s blog: http://www.pigsgourdsandwikis.com/
4.       Check out Ann Marie Concepcion’s excellent Lynda.com titles. This link will get you a one week trial: http://bit.ly/fcGpiI
Finally, you need to get at least a beginner’s grasp of HTML and CSS. Without that, quite frankly, you’re screwed.
Bob

Converting video for use on Sidekick

Good evening.
This might not be the right place to post this, but here goes...
I have a 24" iMac and would like to convert videos for use on my Sidekick LX 2009. The info on the Sidekick says it will play 3GP or MP4 (simple profile). I been trying to convert using VisualHub and HandBrake but to no luck. Any suggestions on how I can do a conversion, or what settings I need in these programs, or some other program to use?
Thanks for the help.

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(26235)

Capturing audio from telephone for use in FCP

My requirement is quite specific, and so far none of previous posts seem to answer my question. So...
I'm looking to capture audio from my telephone for use in FCP. It won't be a telephone conversation, but a voice text. In other words, an SMS sent to a landline. The audio is saved as a voice message on the answer machine. My phone / answer machine is fairly basic - it has a speaker and the only ports it has is for power and the telephone line itself. I have tried a very basic method of playing the message on speaker and capturing it on a mini DV - but that results in too much audio edit to get it to sound acceptable. My Mac is a G5 and I have the full FC studio, but just not sure of best way to get audio onto the Mac without losing too much of the sound quality.
Any suggestions?
Many thanks all...
Kirsten
iMac G5
iMac G5

you need a telephone audio interface like the products made by the fine folks at gentner, telos or jk audio. i have a celltap from jk audio, works very very well. http://www.jkaudio.com/celltap.htm

Extract DVDs for use in FCP

I am looking for a good, free DVD extractor that extracts into a Quicktime file for use in FCP.
I downloaded DVDxDV trial version and it pastes that name all over the file.
Thanks!
Steve

Mpeg Streamclip is good / free.

Converting video for use in The Sims 2

Hi, I have been trying to figure out how to convert video for use in The Sims 2. I have QuickTime Pro, and I am able to export to AVI format, and all I need to know is how to change the resolution. I've looked all through the settings with no luck. Thanks for the help.

Hi, I have been trying to figure out how to convert video for use in The Sims 2. I have QuickTime Pro, and I am able to export to AVI format, and all I need to know is how to change the resolution. I've looked all through the settings with no luck. Thanks for the help.

External Hard Drive for PowerMac G5 for use with FCP Studio

Hello,
I'd greatly appreciate any recommendation for an external hard drive for a PowerMac G5 for use with FCP Studio.
Thanks.
-graziemile

We see alot of Lacie issues here and elsewhere.
Drives fail... period. I believe you hear more about Lacie drives failing because they sell a ton more of them than many other suppliers. I've got 8 of em sitting right here on the desk and two more at the second station. I've lost one since I started using them years ago (and it had problems right out of the box) and I use them pretty heavy.
I understand that they use several different brands of drives in their enclosures, but from my experience they must have pretty good QC standards for what they package.
The guy said the G Techs were a little overkill for his needs. Lacie doesn't pay me. But if someone asks "how are Lacies?" I'll tell them they've been great for me and many others I know, especially if your requirements are capturing DV.
In five years, I ain't heard anybody say anything about it.
As for FCP. I love it! In 20 years of business, it's probably the purchase that's given me the most bang for my buck. But if you haven't heard people knock it, you've never met an Avid zelot, bruhhhhh, just the thought gives me shivers.
The drives X mentioned are designed for video work.
What Studio said, well he gives out some of the best advice on this board
(and maybe the most! ) and my reply to his post... that's why I used the little smiley face. No offence intended X.
I only meant to say that, in a world where software like FCP can do what it does at the price it does it, and drives like Lacie and G Tech can give you the storage they do for the price they do, the line between consumer and professional products is easily blurred.
rh

Converting VOB Files For use in FCP

Hello,
I have a large FCP project using VOB files shot on a DVD Recorder.
I have been been using a freeware called MPEG Streamclip to convert them into Quicktime Files for use with FCP7. The resulting QT files have all been very choppy when used in the FCP Timeline etc.
I have options with this freeware to convert to MPEG, TS or export to Quicktime, DV, AVI, MPEG4 or other formats.
Any suggestions on how to bring these VOB files into Final Cut Pro so that they work well.
Thanks,
Marc

Nick's tutorial is good. Read it.
I had been using Cinematize for this but would always have trouble with the aspect ratio.
With MPEG Streamclip I have no problems if I do it this way:
Export to QuickTime
Change Compression to: Apple DV/DVCPro-NTSC
Quality: 100%
Frame Size: 720x480 (DV-NTSC)
Sound: Uncompressed (the default)
Make Movie
I do a preset of the above.
Now, when you take that resultant file into FCP:
In FCP make sure your sequence set-up is DV anamorphic (if footage is anamorphic/16:9). When you bring that file into FCP it will not be flagged as anamorphic. In the browser scroll over and check mark it as anamorphic. NOW drag into the timeline. Aspect ratio is good if you do it this way.
Sharon

Converting Movie for iPod

So, I have an .MPG file that i want to work on an ipod... but when i do the whole Advanced > Convert Selection for iPod thing which turns it in to an .MP4 file... the sound of the movie goes away.
Is there a way to fix it so it doesnt... or is there another MPG > MP4 editor out there?

If you need help first you'll need to explain a few more things. What version of QuickTime do you have installed? QuickTime 7.0.3 (which adds export to iPod feature) or QuickTime 7.0.4?
I've heard some people had problems with upgrading to QuickTime 7.0.4 - namely they lose their Pro functionality. Also what version of Mac OS X are you running is it Panther (10.3.9) or 10.4 Tiger? How old is your Mac? Is it one of the Intel based Macs released at MacWorld '06 or an older PowerPC based one?
Also what version of iTunes are you running? (This is important) iTunes 6 and higher requires QT 7.0.3 for best video playback. Videos I convert to iPod format using QT's export movie to iPod feature end up in .m4v format (the format of videos sold in iTunes) but mine are unencrypted - no FairPlay DRM.
I am converting my own videos to the iPod's format. .mp4 is another format the iPod can use. If you have ffmpegX (Google it) can convert video to iPod video or iPod TV format.
My videos exported to iPod format in QT 7.0.3 were originally in .AVI format.
Export to iPod (320X240) format = .m4v (MPEG 4 Video)
They work just fine and I have a Mac PowerBook G4 from winter 2003 with OS X Panther (10.3.9) + QuickTime 7.0.3 + iTunes 6.0.2

Converting Movies for iPod: No Sound

Whenever I convert a movie for my iPod, there is no sound in the converted file. The original movie has sound, but it is in a form that you can't put on iPod.
By the way, I am using the Convert Selection for iPod/iPhone under the Advanced menu.
Any ideas??
Brad

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(25780)

Converting movie for use in FCP

Similar Messages

Maybe you are looking for