Converting Multi mode Fiber 100Mbps to FastEthernet

Please advise me! I have an install of one possibly two 4003 L-3 switch as core, and several 2950 access switches installed around the campus. The customer wants 100Mbps Multi mode Fiber cable to connect to the cabinets in the different buildings on campus. Reason for this is the distance from the core switch to the various buildings exceeds 100 and even 200 meters. Can the 100Mbps MMF be converted in the cabinet to connect to FastEthernet ports on the 2950?

Yes, you can. There are a number of companies that make media converters, including BlackBox (www.blackbox.com) and Signamax (www.signamax.com).
If you look around you can find pretty much anything-to-anything (within reason).
Good Luck
Scott

Similar Messages

  • 100mbps multi-port fiber card for Sol10?

    Does anyone know of a multi-port fiber card (PCI) with Solaris 10 support that supports 100Base-FX ? We have a requirement to provide 4 such ports for a customer, and are having a tough time finding such a beast. We can use either quad-port or 2 dual-port cards, but we don't have enough available PCI slots to use 4 single-port cards.
    Basically, we're looking for something similar to this, but with support for Solaris 10:
    http://www.aei-it.com/hardware/fastenet/p430fx.htm
    We've been informed by the vendor that these only support up to Sol 8. We're working on getting eval units in, but are wondering if anyone has used anything similar in the past?
    Thanks!
    Eric

    Due to customer specification constraints, media converters/switches are unacceptable. :( First thing we thought of, too. Also, 3 of the 4 ports are connecting to 100mbps digital hardware boards via UDP, so the mixed speeds probably wouldn't work out if we were to use gigabit fiber.
    Eric

  • SFP with LC connector to be used with SC single mode fiber termination (Cisco2960S)

    Hi,
    I have a question for a Cisco CATALYST WS-C2960S-24TS-L with SFP GLC-LH-SM (LC connector).
    The problem is that we have an SC single mode fiber termination.
    Is there any chance to provide with an SFP with SC connector. In case not, what alternatives do I have? Is there any Cisco recommended SC-LC converter/cable?
    Thanks a lot for help,
    Dario

    You could get a fibre patch cable with LC terminal ends.  

  • HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

    how can i convert a mod file (on vlc) to mp4 to work on quicktime
    when i connected my video camera and imported the videos, they're default is to play on vlc
    they are mod files
    i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
    what do i do

    iPhone supports
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    If your video is supported, drag it to iTunes and sync it to your iPhone.

  • Converting Multi page .eps files to .pdf Preview is broken

    I have in the past used Preview to convert multi page .eps files into
    .pdf files. Since I have upgraded to Tiger 10.4.3 Preview will no longer work.
    Does anyone know how to uninstall Tiger 3.03 version and go back to 2.xx version? Are there any utilities to do this for me? On my older mac (9.x) I have Adobe distiller.
    Thanks
    Max

    I have just copies the older version of Preview onto this machine and am running 2.10 of Preview to solve this problem.
    Max

  • Korg Legacy M1 in multi mode in Logic?

    I have a Korg Legacy M1 plugin. Although there are multiple outputs selectable in the gui of the plugin, there is no multi out version available in the instrument menu in Logic's channel strip, only stereo. Is this just not implemented in Logic, or am I missing something. The M1 documentation is of no help on the logic side at all.

    It is implemented in the VST format plugin as far as I recall. It just isn't implemented in the Audio Unit version, for whatever reason...
    Probably the code to route to the extra outputs is still there (hence why the sound drops out), they just didn't do the extra work to define the plugin as multi-output capable - hence it only presents a stereo-output version to it's host...
    Anyway, the M1 is quite CPU efficient, so you might as well just use 8 individual instances in performance mode, rather than multi-mode (multi mode was really only a way of getting as much out of limited resources as possible, and was sub-optimal in most instruments due to lack of effects and other things - in these enlightened days, we don't have to deal with the same resource limitations of old like limited polyphony, single effects units, and so on...)

  • Illustrator CS2 Start up - Convert color mode dialog box

    Using Illustrator CS2, on opening, the usual loading prescreen appears, after which a dialog box appears showing the following text
    "Convert Color Mode"
    "The document contains objects using both CMYK and RGB color modes. Illustrator allow only one color mode per document. Which color mode would you like to use? (RGB and CMYK appear as option boxes)"
    This dialog box appears every time I open Illustrator, even though I'm not actually opening a document.
    I've tried adjusting the Color Settings (Edit> Color Settings) but this hasn't affected the dialog box appearing.
    I've checked all the usual sources of help but can't identify any cures.
    I want to be able to change this so the dialog box no longer appears as it tends to "hide" behind all the other applications I have open at the time and can be difficult to get to, meaning opening Illustrator is a 5 minute battle.
    Any ideas?
    Thanks

    You haven't messed with the startup .ai files have you?
    You might try deleting the ai prefs file (see FAQ), though that might be a reach in this case.

  • Transitioning to Single Mode Fiber

    Hello, 
    We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer. My idea was to use Single Mode Fiber for these new buildings as long as the speed between the IDFS and MDFS is 1GB.
    So I assume I need new transceivers ? Which ones will work with the models below mentioned? 
    My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches. 
     Eventually when we replace the switches then we'll go to 10GB but then I will need 10Gb transceivers but that will be another project for another day, I guess.
    Any help will be much appreciated.  

    We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer.
    What is the distance of the single-mode cable?  
    My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches.
    Part number is:  GLC-LH-SMD
    You will also need to get SM patch cords.

  • Can I use Adobe Premiere Pro to convert Camcorder MOD files to MPEG?

    Can I use Adobe Premiere Pro to convert Camcorder MOD files to MPEG files?

    If you are on CC2014 probably not. It does not get interpreted correctly.
    Premiere and previous versions does not support MOD files.
    Best is to convert to avi
    converio_095.htm
    The first link John posted contains confusing and incorrect information.

  • Can I run VSS over Single-Mode fiber long range?

    So I have 2 Cat 6509 currently in the same room and I use VSS. I would like to split these 2 switches up geographically on the campus and they would be approximately 2500' apart. I plan to user single-mode fiber with 2 10G LR links on each switch. Any help would be appreciated! 

    As Leo also noted yes that will work fine. It doesn't matter what optic (LR,SR, etc) you use as long as the VSL comes up you are fine 
    what you have to be care full with is that now you have to use single mode for one of  the uplink ports coming from your access switches
    HTH

  • Convert multi org in 11.5.10,2

    Hello,
    Through adadmin I try to convert multi -org, I ran the multi org option and got an error
    ERROR at line 1:
    ORA-20000: ORA-20001: Cannot read site level profile value for profile 'ORG_ID'
    Cursor SQL statement:
    SQL statement:
    ORA-06512: at line 463
    Then try to update my MO: default operating unit at the site level , LOV is not shows up and the error is APP-FND-01436.
    What step I am missing here? Please advice.
    Thanks
    Prince

    Hi Prince,
    Through adadmin I try to convert multi -org, I ran the multi org option and got an error
    ERROR at line 1:
    ORA-20000: ORA-20001: Cannot read site level profile value for profile 'ORG_ID'
    Cursor SQL statement:
    SQL statement:
    ORA-06512: at line 463
    Then try to update my MO: default operating unit at the site level , LOV is not shows up and the error is APP-FND-01436.
    What step I am missing here? Please advice.Please see (Adadmin - Convert to Multi-Org Fails on Adworker [ID 183066.1]).
    Thanks,
    Hussein

  • Need config steps for Multi-Mode Transportation in SD

    Hi Gurus,
    I am implementing Transportation Module in SD , I covered domestic part means Single mode .
    But Now i have complete Multi-Mode Transporatation for Export , contains Rail, Ships, i.e Multimode Transporation ,
    Please give me Config. steps for it
    Thanks
    Devdatta Joshi

    Check if the link below is helpful:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Files converted from .mod to .mov have no audio in QT

    I recorded some video on my sister's JVC camera and then she used her PC to convert the .mod files (which the camera creates) to .mov files. When I play them on my Macbook with QT Pro or iMovie, though, there is no audio. The Movie Inspector and Movie Properties both say there is audio (AAC, Stereo), but nothing will play it. I've tried downloading a few codecs, including Perian, but so far nothing has helped. It doesn't look like the audio is playing in the DivX Player, either. Anyone have any ideas?

    Was the data rate I provided not the right one?
    No. Use the "Properties" window. It can indicate independendent data rates for each track. In this case your audio data rate is only 2.272 Kbps. For optimum playback of a 48 KHz track you would want to use a data rate of 160 Kbps (128 Kbps for a 44.1 KHz sampling rate. Reconvert the original file using an audio data rate in the minimum to optimum range for your specific audio sampling rate. If you have QT 7 Pro installed, look at the "Movie to MPEG-4" audio tab preset to see a list of possible combinations for a given audio sampling rate. Any grayed out combination would not acceptable for use on a Mac and QT Pro would not allow you to select such a combination. Unfortunately, your work flow does not appear to have such safeguards. While you could target any of the acceptible combinations when you re-convert the files, the most common/optimum ones for movie files are 128 Kbps @ 44.1 KHz and 160 Kbps @ 48 KHz assumimng a good audio source.
    OTHER COMMENTS: Your video data rate is also low for its 853x480 dimensions. (I.e., your target video data rate would normally be used for a 480x270 iPhone conversion and the MPEG-4 video compression is only about 40% to 50% as efficient as H.264 video compression format. Since you seem to be having problems chosing conversion settings, I would recommend using an application like MPEG Streamclip (free) here. It is available for use on both Mac and PC platforms and is supposed to be able to handle MOD files. However, believe this requires MPEG-2 support which costs $19.99 for the Apple QT MPEG-2 Playback Component for use on a Mac or can be free in the form of the KL QuickTime Alternative for use on a PC. Just be sure to reade the install requirements for whichever platform you plan to use. Once installed, use the "Export to MPEG-4" File menu option to open the main conversion window and then press the "iTunes" button to select a specific device target (i.Phone, iPod, or TV) option having the desired predefined settings you wish to use.

  • Media converter AIR-PWRINJ-FIB

    We have AP 1240AG connected to LAN via media converter AIR-PWRINJ-FIB.
    When there is link failure on the fiber side of the AIR-PWRINJ-FIB the cooper port on the media converter is always up and did not detect fiber disconnection effectively AP1240AG did not detect LAN connection failure.
    Is this a normal behavior of AIR-PWRINJ-FIB?

    This is normal in install Ihave seen. the issue is the ap does not communicate with the far end switch in spanning-tree. What some have done is put switches on both ends, but that might be costly. You might want to search around for a converter that might have the ability to do this...
    This sounds like it can do what you are looking for:
    http://www.transition.com/TransitionNetworks/Products2/Family.aspx?Name=E-100BTX-FX-05(xxHT)

  • Multi Mode Shipment

    Dear SAP Guru's
    I got lots of documents on Multi mode shipment. But I am not clear that do I need to create the different Shipment document types and Shipment cost types for different mode such as Road, Ship and Air
    SAP suggest to define new document types for each and every type of mode. I found one document in Wiki which suggest to calculate the price on leg and need some inputs / briefs on how to calculate based on leg.
    How can I configure the scenario? Request you to brief on the same.
    Thanks & Regards
    Rahul Mirashi

    1)  Have the required leg wise condition types like plant to port, port to customer destination which can be maintained in TK11
    2)  Once you create the shipment document via VT01N, you have to key in manually the different vendor codes under the tab "Stages" and save.
    3)  Now if you create a shipment document, liability will be created on those vendors.
    thanks
    G. Lakshmipathi

Maybe you are looking for