Converting my site into my wordpress site for my blog

Hi I'm having a lot of trouble converting my site www.dor2dor.com into a wordpress site so I can use it as my blog. To be honest I haven't got a clue what i'm doing here as I don't use wordpress.
If anyone could point me in the right direction that would be great.

If you really want to transfer everything to WordPress, you will have to create new Pages (as opposed to new Posts) and transfer your copy and images from the current site to each of the corresponding WordPress Pages you create. Having taken a quick look at your website, however, why not keep your current set up? A much less time consuming solution is to make the blog link much more prominent throughout the current site. As it is now, it's buried at the end About Us.
Chris

Similar Messages

  • How do I import Edge files into my Wordpress site

    New to edge.  Need to know how to incorporate the finished edge file into my WordPress site.  Specifically I want to create an animated banner.

    Couple of options you can try.
    Wordpress plugin - WordPress › Edge Suite « WordPress Plugins
    Manual method - http://threecell.com/blog/seo/adding-edge-animate-to-your-wordpress-site/
    Darrell

  • Integrate HTML Help into a WordPress site (or similar)

    Folks,
    Has anyone ever had any success integrating a HTML Help into a WordPress site (i.e. search)?
    We are building a customer support community and WordPress looks like the current favorite platform.
    We would like users to be able so search and be presented with relevant:
    Help posts
    Forum topics
    Pages
    Blog posts
    etc.
    All suggestions most welcome!
    Thanks,
    Donal

    Hi there
    If you have access to the WordPress site via FTP or means other than the WordPress front end, it shouldn't be too bad. Just copy the output files to the site and create a link from one of the site pages to the WebHelp or other start page.
    I used to be involved with a church web site that worked that way. The main site editor didn't understand WordPress, so there were many pages she edited outside of WordPress and used DreamWeaver to do it. The site was a mish mash combination of odd pages.
    Cheers... Rick

  • Can web pages generated with Muse be integrated into a wordpress site?

    Can web pages generated with Muse be integrated into a wordpress site?
    Can sites/pages generated with Adobe muse be published through word press?

    Muse is static HTML, WordPress is a PHP-based CMS. Neither has anything to do with the other and depending on whether you use a pre-hosted WordPress install it may not even possible to include any static HTML nor modify the WP theme. Otherwise your static muse site would simply be a sub-domain/ sub-section in a separate folder that can be linked from the main WP install, but beyond that they don't interact.
    Mylenium

  • Can I merge an iWeb site into a regular site?

    I have an existing site which was not made with iWeb. I've wanted to update it so I decided to use iWeb 08. I'm a bit concerned that when I publish the iWeb site into my old site that things will be written over. Will this be the case? I have a lot of other programs on my old site like php and mysql based things and I can't have those be over-written.
    Thanks,
    Tom

    Thanks for the help. Here's the latest, I changed my Site name to Documents, so that it would match my webserver's information. (I changed my current Documents folder to Documents-bak so I wouldn't destroy it.) I published the new Documents iWeb along with some changes. After publishing, I took a folder with some pdfs in it from my backup and manually copied it to the new Documents folder. Checked the website and everything worked. Then I went back to iWeb, added a new Album, the published it. The folder I copied over was gone....poof!
    This leads me to think I should have a splash page under my webserver root directory (/Documents/index.html) that links to /Documents/Site/index.html (with Site being my iWeb site) and leaving all the other items under /Documents. This would prevent the deletion of files that don't relate to iWeb since it is in a different directory.
    Sorry if I'm being confusing, for the last 15 years I've built sites with things like Frontpage, Dreamweaver and other programs where I didn't have to worry about this stuff. I love iWeb because the site I'm talking about is my personal site with kids' pictures and it's pretty easy to use.
    Question, say I add an album to my iWeb. Do I need to republish the WHOLE site again? I can't find a way to just publish changes rather than the whole site.
    Thanks - Tom

  • Merging iWeb 06 site into iWeb 08 site

    Hi,
    I've looked around at other posts regarding this subject but don't really understand what's going on.
    I have an old site built in iWeb 06 that I want to use in iWeb 08. I have multiple copies of the Domain.
    I have a new site built in iWeb 08. The domain file is in users/app support/iWeb folder. It is the only file in that folder.
    Is it possible to be able to launch 08 and show both my sites in the sites pane instead of having 2 domain files for each site or should I just keep 2 domain files in the iWeb folder? I'm kind of nervous about that because I have noticed if I'm not careful, I will overwrite a Domain file and lose what ever I had on the old one. I thought about launching 08, starting a "new site" (in addition to the one already built) and somehow copying and pasting the old site from 06 into a "new site" section of 08 but I can't figure out how to do that.
    Again, I do have multiple copies of each websites domain file.
    Thank you for the help. I think others have had this problem as well. I'll see what else I can come up with.
    Thanks, LowBb

    I found this posted by Roddy,
    http://discussions.apple.com/thread.jspa?threadID=1175298&tstart=25
    I don't really understand this part.
    Roddy said "You can simply link one to the other or hide the standard navigation and build a new one which has all the pages of both sites."
    LBb
    Message was edited by: LowBb

  • Is it possible to nest an iWeb site into another iWeb site?

    Hello,
    Is ist possible to nest iWeb sites?
    Let's assume I have two iWeb sites, called site A and site B. Site A is my main site, and I would like to insert site B into A, so that 'site B' appears in the navigator, and that clicking site B in site A's navigator will take me to site B?
    I could drag all of site B's content elements (blog, albums etc) to A, but this would make them appear all in site A's navigator, which would give a clutter of section titles.
    Suggestions?
    Best wishes,
    Olaf.

    What you do is get rid of the standard navigation by unchecking the "display navigation menu" box of the "page" inspector for each page of your site.
    Build a new navigation in a text box with links to all the pages in Site A plus a link to site B. Copy and paste this navigation to all the pages of your site.
    Repeat for site B.

  • I need to know how you would publish a new site into an existing site

    Okay I have a new Dreamweaver website that I just created for my brother in-laws law firm and want to publish in onto an ftp server but the sever already has the existing site published onto it and before I have it pulled down I would like to publish this new site on there to see if everything is going to work okay and if everything is displayed correctly.  Does anyone know if there is a way I can do this and how to do it?  Please help!!!
    Thanks

    I typically create a TEST folder on the remote site.  Upload new pages and dependant files there for debugging and testing purposes.  Then using a 3rd party ftp ware (filezilla, cute ftp or Ws_ftp pro), I move the new site files & folders over to the root directory.  If you have used the same filenames as were on the old site, new pages will overwrite the old ones.  If you used a different naming convention, you will need to delete old files from server.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Convert jsp page into xml  or dom for search

    Hello everyone,
    I have to build an application that searches for message beans in all jsp page. I did it the traditional way, using scanner and string methods. Its working but its not perfect. So i want to convert all my jsp page into xml format and then process them. My jsp pages are quite complicated. I used some jars that convert them into jspx . But its not working. Please help
    Thanks in advance

    Well its like this.I need to develop a program that reads all the message bean keys.. We have lots of struts webapps. All messages in the jsp pages have been externalised and internationalised. Now i have to build a program that given a webapp path prints out all the message bean keys used in the webapp. I have developed the program using the Plexus Directory scanner to filter all the jsp pages and java util Scanner to read line by line and used String functions to search for keys.
    Now thats not the best soultion. The best way, imo, is to cinvert the jsp into xml pages and then we can parse the xml pages easily. The' problem is to find a way to convert the jsp pages(jstl +javascript) into xml.
    Can you help me out?
    Thanks

  • How to safely change the domain controllers that Exchange use from Out-Of-Site into the In-Site ?

    Hi Folks,
    I'd like to know what's the best way to edit the Exchange Server 2007 entry
    In-Site entries and removing the entries from Out-Of-Site safely without causing any downtime or problem with the workstations ?
    From the MSExchange ADAccess Event ID 2080, I can see that the Domain Controllers that is currently used by Exchange Servers is all on the
    In-Site lists which I need to decommission due to office building migration and downsizing, the workstations remain in the same building only the servers must go.
    Current configuration:
    Exchange Servers AD Site: HQ1 (for all roles)
    Workstations AD Site: HQ1
    Proposed configuration:
    Exchange Servers AD Site: Prod-DC1 (for all roles)
    Workstations AD Site: HQ1
    Thanks.
    /* Server Support Specialist */

    Hi,
    Steve's clarification is right.
    From your description, you want to change the DC used by Exchange server. If I have misunderstood your concern, please let me know.
    Please make sure the following things before setting the DC for Exchange:
    1. New DC has its own IP in its TCP/IP as primary DNS server.
    2. New DC is global catalog.
    3. New DC has correct DNS settings in the MSDC folder.
    4. Restart the Exchange active directory topology discovery service and watch the event viewer, there should be an event that discover both domain controllers. If this happens, then turn off the old DC.
    Besides, topology information will remain in the system attendant service for 15 min, so the time to switch to the new one is about 15 minutes.
    Hope my clarification is helpful.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support
    Amy,
    The Exchange Server has been rebooted couple of times but yes, all of the In-Site AD servers are still on not rebooted yet.
    So in this case do you suggest me to demote the oldDC and turn off all of the In-Site DC/GC first and then reboot Exchange Server after wards one by one ?
    /* Server Support Specialist */

  • How to convert editable pdf into non-editable version for printing option only without setting up passwards?

    I am using IOS system with pdf preview functions. I try to convert editable pdf file into read only for others to print without access to edit the file.
    The only way I can do now is to convert to jpeg for each page and convert back to pdf then combine all pages together. It takes a lot of time in this case.
    Can anyone tell me how to do the conversion without setting up passwards for protection?
    Thank you very much!

    First of all, don't use all CAPS as it means shouting.
    Second, your question is completely off-topic for this forum which discusses Microsoft Office Outlook.
    Third, this is a peer-to-peer forum, don't count on anyone calling you. If you want dedicated support from Microsoft, contact Microsoft Support directly.
    Anyway, you can insert the picture in to OneNote and then have OneNote convert it into text. This usually isn't very accurate for scans though.
    A better solution would be to use a application which is dedicated to OCR. There are various out there. I suggest you try their demo versions to find out which works best with your handwriting.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • Can a sub domain be created in order to have a wordpress site?

    I am developing a wordpress based site that involves jquery masonry. However, I want to keep the ecommerce of my BC site in tact.  I understand that business catalyst does not support php. My developer said that the best thing to do is to get a sub domain and host it from a different provider. Is this correct?

    Hi,
    You could create a subdomain like blog.mydomain.com and setup your DNS to point to another provider's web server that is running PHP (like GoDaddy) so you can run a WordPress blog theme that incorporates jQuery Masonry. So your developer is correct.
    The only downside is Google will treat the subdomain like it is a 2nd website, not part of the main domain, so if you are writing a blog to build up your ranking for the main BC site where your e-commerce products are this won't accomplish that as well.
    As you know, Google doesn't like indexing product-only e-commerce websites very well, so I usually recommend to my clients that they also provide lots of written articles on their e-commerce domain, which Google will index and rank high and those articles bring visitors into the site. It is naturally best for those articles to be on the same domain as the online shop, so the main domain gets credit for those articles. If you put them on a subdomain, it gets the credit, not the main site. You would of course have links from the subdomain site pointing to the main domain shop, and as you know, inbound links to your domain from another help raise your Google rank, but Google will only give you partial credit because it will notice that the subdomain site is linking so many times onlyto the same ecommerce site. In other words it will know you are using one site just to promote another and those links aren't coming from many sources.
    Another approach is to accomplish your Masonry blog on BC. You can run jQuery Masonry or jQuery Isotope plug-in (both were written by http://metafizzy.co/ ) with a BC blog if you want to, so it can look just like the WordPress site you were thinking about. I've already used jQuery Isotope with the BC blog module, but on a site where each Blog Post is a photo rather than a written article. You can see it in action in the Gallery sections at http://www.BigDayWeddings.net where each photo you see is actually a blog post.  You could peek at my code there in the source code to see how that's working.  If you don't want to code it all from scratch like I did, you can on ThemeForest.net find an HTML template that does masonry or Isotope blogs (often the same templates sold there for WordPress for $35 also have an HTML version as well sold for only $15) but you'd still have to integrate that HTML template into the BC infrastructure for the blog.

  • Edge animation in Wordpress site slow to load.

    Hi clever Edge people.
    I have an (simple) Edge animation I am putting into a Wordpress site but it takes forever to load when looking at the site on a browser - trying it on ipad, Google chrome, firefox, and safari. The .oam file is 1.9mb. Is that big?
    Here is the link (site in development so kinda messy!):
    http://everywhereyougo.co.nz/2012/11/shakespear-regional-park-2/
    How does it load for you? Any clues about why it is slow?
    Thanks!
    Lisa

    Hi Lisa,
    first of all thanks for using EdgeSuite for wordpress. Did you use shortcodes? Would it be ok to use your site as a reference for edge suite, I would list it on edgedocks.com if you would agree?
    Now to your question: By looking at the network traffic you can tell that your homepage is more then 3.1MB big, thats quiet a lot. Use google pagespeed extension for chrome, yslow for firefox, the network tab in firebug or just http://www.webpagetest.org to get an idea of what's going on.
    For example, the three icons FB, twitter, vimeo are each 500KB big, so these three icons are already have the size of your page. That is one thing to fix, but probably not the only reason for your composition to load slowly. You are using a lot of small assets, it just takes some time to load these. Does the composition load right away locally? If you want to further reduce loading time you could use spritesheets. You can combine small images within a bigger image and clip the focus when using the image as a backgound for a div. And try to reduce Photo1 2 3, each 150KB big.
    What about adding a preloader for the animation, the then user at least knows that there is more to come.
    Just suggestions.

  • Merging two separate MUSE sites into a single MENU system and Paid & online BC eCommerce site

    Hi all! I am stuck trying to figure out a Process Conundrum:
    1> I have a BC site with e-commerce ready to go - paid - online with store template in place.
    2> I also Have a 2nd MUSE created web site (with the client content/pages) that needs to merge with that E-commerce BC site. 
    What is the move to merge the two separate sites into a single site with the Menus all in proper order?
    Is this simple and I can not see it? (merge the two sites in a folder and reopen in muse for new menus?
    Or do i need Dreamweaver to assist in the merge?
    In other words:
    What is the PATH/PROCESS to merge a 2nd MUSE designed web site (sans e-commerce), in order to tie into the online BC e-commerce template paid site - so the menus update together as "one" site?
    Menu Update Concern:  merging two separate MUSE sites into a single MENU system with the "Paid on line Active BC e-commerce Template". How do it do it Process wise so that the menus adjust automatically... so they are "one" menu.
    Reminds me of an old joke: Q: "What did the Buddhist say to the hot dog vendor at the ball park?"
    A: "Make me one with everything!"
    ONWARD>>>>>
    Possible paths I am about to take attempting to Solve the problem - and scale the learning curve...
    download the BC e-commerce site into Dreamweaver -
    export the 2nd muse site by publishing it to a unique folder.
    combine them by going back into dream weaver and attempting to figure out linking the menus. - perhaps they are automatic there too.
    or load them both up to BC and back down to MUSE to fix the menus?
    I appreciate Any recommendations, hits or humor that you could help on this.
    Cheers!

    Thanks, Liam... I will get it eventually...
    Sadly: I do not have a budget to hire this out...
       -  I have gone through lots of the BC and Muse training exercises. Adobe
       and BC Gurus.
    But... if the only problem is that I need to work though my partner site BC
    interface...
       - that would be fine...
       - so would using dream weaver....
    I will go back and review the BC interface and also dreamweaver
    capabilities.
    without a budget... i need to figure it out... please do point to any
    material or training you might be able to point me to.
    I don't have to use muse, if that is my sticking point. I just need to get
    the project up and BC looks perfect.
    Thanks.

  • Help I need to convert my movie into a SWF file

    Does anyone know how I can convert the movie into a swf file for flash?

    http://smallbusiness.chron.com/format-iphone-voice-recorder-use-57197.html
    ffiti wrote:
    In what format are raw Voice Memos files anyways?

Maybe you are looking for