Converting Octel Contributor mailbox app to Unity/Unity Connection ?

I have one remaining voicemail application on an old Octel system that needs to be converted to Unity or Unity Connection. The application is for customers to call into and listen to the status of pending jobs. The customer hears the message for each job, one after each other. No sign in, passwords or key entry is needed by the customer. Typically there are 1 to 7 messages that the customer can listen to. Each job/message is added by an internal contributor mailbox via several different employees throughout the day. It is not practical to re-record the previous messages when adding a new message.
Can a similar application be setup in Unity/Unity Connection?

Hi James,
Can you please tell us what type of mailbox(s) you are using for this on
the Octel (Type 1, Type 31, Type 5??) And also, if you could, please
describe the actual method of being able to record only a single portion
of the script for new jobs? Are they all single mailboxes linked together
behind the scenes so that a user (contributor) can send to a specific
portion/mailbox?
Cheers!
Rob

Similar Messages

Best Practices for Setting up MailBox Quotas in Unity Connection.

Hi all,
I've just completed migrating from Unity 4.0.5 to Unity Connection 8.0.2c and all seems to be working well at the moment. I am looking into setting up quotas for subscriber mailboxes and I would like to find out what are the rules of thumb when assigning disc space to user mailboxes ? and How much disc space does it take for a one minute message ?
Thanks in advance for any inputs/suggestions !!!
D.

D. Tran,
Here are some things to consider:
–Mailbox Quotas
•Specifies a mailbox size in MB for Warning, Send, and Send/Receive Quotas on mailboxes
•Can be applied system-wide and customized on a per-user basis (maximum mailbox size is 2GB)
•Default Warning Quota = 12 MB (25 min of recording with G711)
•Default Send Quota = 13 MB (27 min of recording with G711)
•Default Send/Receive Quota = 14 MB (29 min of recording with G711)
When you use G711, the space requirements for a message are:
•480Kb/min when using G.711
–Message Aging Policy
•If enabled, it applies system-wide but can be disabled on a per-user basis.
•If disabled, no message aging policies are applied and cannot be enabled on a per-user basis.
Should you need to be more aggressive in your Message Aging Policy, you can optionally choose to move saved messages to the Deleted Items folder within a specified timeframe. This is disabled by default.
I typically recommend giving users access to the deleted items (it allows them to access deleted messages for a period of time after they delete them). This is set in the Class of Service here:
–Class of Service > Message Options > Uncheck “Delete Messages Without Saving to Deleted Items Folder”
Hope this helps.
Hailey
Please rate helpful posts!

Unity Express General Mailbox feature in Unity Connection??

Hello All,
Am moving a customer from CME/CUE to BE6K.
I've just run into a feature in CUE that I can't duplicate in Unity Connection.
In CUE; the customer can login (TUI) to her personal voice mailbox where she is prompted with the standard "to send a message; press 2. You have no old messages. for setup options 4. to exit *. for Help press 0." But along with that she also hears; "to Check General mailboxes press 9"
If she presses 9; the system prompts her with the General Mailboxes she can access / check messages on. There may be 6 General Mailboxes on the CUE; but she is only prompted with the ones she is associated with.
Pretty cool feature because she can check all of the other voicemail boxes she is responsible for from within your own personal voicemail box.
She doesn't need to remember the passwords for all of the General Mailboxes.
Is there some way to duplicate this on Unity Connection??
thanks.
Pat

Hi,
Check this out.
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a00802ab979.shtml#update
Gabriel

Looking for a report on user mailbox size in Unity Connection 8.5.1

Cannot find a report that shows mail box size so that we can identify users approaching limit.
The canned reports don't have mailbox size. Thanks in advance. Mel

Hi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris

How to delete multiple messages in the same mailbox all at once? Unity Connection

I just was assigned the task of administrating three Unity Connection servers that are networked. The Operator mailboxes on each system have been taking messages since 2010 and have over 5 thousand messages in them (nearly 3 mega bytes). I've corrected the set up so the mailboxes no longer are taking messages, but would like to delete all the new messages in order free up memory resources, and I don't want to undo all the Call Handler relationships in order to delete the mailboxes and then recreate them, etc. I used the PCA tool to clean up the Operator MBX on a standalone Unity Connection that had nearly 1800 messages, but it took nearly 30 minutes for the PCA tool to load and another 4.5 hours to delete one message at a time (major carpal tunnel afterwards!). For these mailboxes with 5-6K messages, the PCA tool was not loaded after 3 hours!   Is there a faster, more efficient tool for deleting all new messages in a single mailbox? (i.e., Message Hunter?)

Hi There,
+5 to heath for his good notes!
One nice way with Unity Connection is with the use of this excellent tool from the great suite of Unity Tools (use the ** reset" feature **).
Unity Connection Bulk User Delete
For resetting users you have the option of emptying the mailbox, resetting greetings, deleting voice names, resetting passwords, removing private lists and a number of other options you may choose.   For installations where the user base “changes over” frequently such as schools this may be a nicer option. This option is also allowed for CoRes installations since it does not involve the removal of user objects from the Connection database.
http://www.ciscounitytools.com/Applications/CxN/BulkUserDelete/BulkUserDelete.html
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

Unable to access Unity Connection Operator Mailbox via TUI

Hello,
Customer running CMBE 6.1 with corresponding Unity Connection 2.1. I am attempting to access the Operator voice mailbox through TUI but have been unsuccessful. I've tried changing the Voice Mail password in Unity Connection.
I press Messages on the phone, press star (*), enter 99990#, then my password followed by #. System comes back saying "Invalid Entry"
Thanks,
Dan

I think you might be running into the this bug: CSCsl00706: Can not change password for UndeliverableMessages mailbox to gain access

Unity Connection 8.5 mailbox quotas

I configured mailbox quotas for user mailbox
Send/receive quota is 3 Mgb
Send Quota is 2 Mgb
Warning Quota is 1 Mgb
User mailbox is already 3.5 Mgb
HOwever, when i call this user from internal or external number - i still can leave a mesage for this user ( i expected system DOES NOT ALLOW to leave any new mesage for this user because his voicemail box is already exceeds Send/receive quota which is 3 Mgb )
Checkbox for option "Full Mailbox Check for Outside Caller Messages"is already checked in
What is wrong in this config ?

Here is how send/receive quotas impact things:
Quota Handling for Outside Caller Messages
By default, if an outside caller attempts to send a message to a user whose send/receive quota has been exceeded, Cisco Unity Connection allows the caller to record a message for the recipient. This can be changed by checking the Full Mailbox Check for Outside Caller Messages check box on the System Settings > Advanced > Conversation page.
If the recipient mailbox has not yet exceeded the send/receive quota at the time an outside caller records a message, but the quota is exceeded in the act of delivering the message, Connection delivers the message regardless of the quota or the setting of the Full Mailbox Check for Outside Caller Messages check box.
Quota Handling for User-to-User Messages
If a user whose voice mailbox has exceeded the send quota signs in to Connection and attempts to send a message to another user, Connection indicates that the send quota has been exceeded, and does not allow the sender to record the message. If the user calls another user and is forwarded to a voice mailbox, the user is able to leave a message, but the message is sent as an outside caller message.
If a user attempts to send a message to another user whose mailbox has exceeded the send/receive quota, or if the quota is exceeded in the act of delivering the message, Connection sends a nondelivery receipt to the message sender.
Connection delivers read receipts and nondelivery receipts to users regardless of whether their quotas have been exceeded.
HTH,
Chris

Unity Connection 8.6 Mailbox Store Issue

Hi,
I am seeing an alert in Unity Connection Mailbox Stores that" This mailbox store is at or over 90% of its capacity ".
Also i have set the Aging Policies, but still no results. Anyways to reduce the size by deleting any other unwanted files.
Pls suggest.

Hello Jagadish,
In regards to this warning message you can also reference:
https://supportforums.cisco.com/thread/2241790
If your aging policy is "not working" it may be due to the fact it is not working retroactive, meaning that it is not purging old messages.
For best practices it would be best to create another Mailbox Store rather than increasing the size of the current one due to the fact that backups might fail due to the size.
Best regards,
David Rojas Peck.

Mailbox Custom Settins in Unity Connection Version 8.6?

Is there a way to get a list of all users with Mailbox Custom Settins in Unity Connection Version 8.6?

Hi Ronald,
You'll want to check out this Tool from the great suite of Unity/Unity Connection Tools
Connection User Data Dump (CUDD) Tool
The Connection User Data Dump (CUDD) is a Windows-based remote database administration tool available on the Cisco Unity Tools website. CUDD allows you to export specific information about users to a file that can be viewed or imported into another application, such as a database utility or Microsoft Excel. When the data is exported, the tool automatically creates a header row that lists the data type found in each column of the output, for ease of import into other programs.
The tool is available from the "Superb" Unity Tools site;
http://www.ciscounitytools.com/Applications/CxN/UserDataDump/UserDataDump.html
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Unity Connection 9.1.2 - MS Exchange 2013 support for Single Mailbox?

Hello,
we are currently running a unity connection system in version 9.1.2TT1.11900 together with single mailbox enabled with our Exchange server in version 2007.
We are now planning to upgrade the exchange server to version 2013. From my understanding Exchange 2013 is supported with CUCN 9.1.2 (see http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/design/guide/9xcucdgx/9xcucdg020.html).
When i go to the configuration screens I cannot choose Exchange 2013 ... Is there a special way to configure this or is 2013 not supported with Unity connection 9.1.2 ?
any hints ?
Michael

Exchange 2013 is supported.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/unified_messaging/guide/9xcucumgx/9xcucumg020.html#17832
If you choose to allow Unity Connection to search for Exchange servers, then you need to select from the following two options:
– Exchange 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2007, Exchange 2010, and Exchange 2013.
– Exchange 2003, 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2003, Exchange 2007, and Exchange 2010. When the Exchange organization includes Exchange 2003 servers, Unity Connection always communicates directly with the Exchange back-end servers, it never communicates with Exchange front-end servers.
The drop down does not state 2013 but it will work fine for 2013..

Unity Connections 8.5 - Mailbox Access Rights

Hello,
Is it possible in Unity Connections 8.5 to have a mailbox setup where anyone who has the ID and PIN can access and listen to the messages but cannot delete the voicemail messages. There would be only 1-2 to users have the capability to delete the messages. I have a request to setup an attendance dial in mailbox where it can be checked by multiple users but only a select few would have the ability to delete the messages.
Thank You

Hi Troy,
My friend Tony is most correct here (+5 ) The best you can
do is trick most of the users into thinking "delete" is not available.
These settings are only exposed when using the Custom Keymapping Tool
in CUC, so you won't see them on your default conversation. Let's say
you are using the Classic Conversation for your users. You can go to the
Custom Keymapping Tool from cucadmin and say select Custom Keymapping #3
when it comes up you would, first off, reset the mapping on all tabs to Classic Conversation
this would then replicate your existing setup. Then go to the After Message menu page and map
some key # to "message delete" I used 17 in my tests here. Then you would also uncheck the
"option is voiced in menu" checkbox so the users that you apply this keymapping to would not
be offered the delete message option.
The next step is to assign the new Custom Keymapping #3 conversation to the
required Mailbox via user>xxxx>Phone menu>Conversation>Custom Keymapping #3
and apply.
You would also set Phone menu>Conversation>Custom Keymapping #3 in the User template
area so special "restricted" mailboxes that are created can use this conversation as well
In my tests here the only thing different than this example is that we use the Optional Conversation 1
so I reset the mapping on all tabs to Optional Conversation 1 when going through the steps above.
This worked like a charm.
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Method to convert Subscribers to Internet Subscribers in Unity 7

A client is trying to move away from Exchange and going strictly with Google for email. So they are having to change their subscribers to internet subscribers in Unity Version 7(not Unity Connections). Is there a easy way of doing this without having to delete each subscriber then rebuild them as internet subscribers? I know I can use the bulk administration tool, just trying to see if there is just a conversion method instead of delete and re-add.

Thanks Rob.
We have the same issue (i.e. Exchange is at the first warning, and Unity is giving "ALMOST full" messages we can't skip through). If I'm reading the thread correctly, it sounds like they didn't find a solution either. :/
At least we're not the only ones. : )
Mark

Unity Connection 8.6 call transfer to non-unity extension

I have converted from Unity to Unity Connection and am looking for a solution for transferring an incoming call to a non-unity user extension.
Here is the scenario: An PSTN caller calls in and is directed to a Unity Connection Call Handler or a Subscriber greeting. In the greeting they are advised that if they know the extension they want to call, they can dial it at any time. Here is the rub, if they dial an extension for a user listed in Unity Connection, the call gets transferred to the extension. However, if the extension dialed is to an extension that is not a Unity Connection User, the attendant comes back and say the extension is not understood.
In Unity before conversion, I would make an internet user that did not have a mailbox but was listed with an extension. However, with Unity Connection, I am using LDAP integration with Microsoft AD and I don't see a method of doing the same thing.
Is anyone else doing something like this or know of a method to do it?
Thanks in advance.
Gene Keel

In the greeting check this box:
Allow Transfers to Numbers Not Associated with Users or Call Handlers
also make sure the number entered by the call is allowed in Default System Transfer restriction table.

Unity Connection 8.6.2 report error and issues

Hello,
I found some other hits on this error and tried the workarounds (restarting tomcat, and report data harvester) but am still getting "Unable to find any report data based on parameter(s)" for a certain timeframe on multiple reports when I know activity occurred in that timeframe.
User Phone login report, Outcall Billing Detail Report, others.
CUC version is 8.6.2.20000-2
Problem is during this timeframe someone dialed into system and changed the transfer extensions to various LD numbers throughout an entire day and the reports aren't showing these outcalls. Call Manager CDR data show the calls being placed from Unity VM ports and the Unity Conversation Manager traces I grabbed for the timeframe show the calls to those numbers to. I'm just trying to match up with a report and figure out if there is some other log or trace file I can look to determine for sure the caller logged in to the voicemail box and changed the transfer extension on it. (guessed the voicemaill password). The failed log in report doesn't even show the failed login attempt in output from traces below. The transfer extension dest addr was different on the transfers on this same mailbox. Have locked down the system since but want to get better grip on this with the reports and traces.
I looked over the CUC 8.6.2 SU1 and SU2 release notes and not seeing any resolved bugs for these matters either.
Here are some samples lines from Conversation Manager traces:
00:32:46.399 HDR|02/04/2013 ,Significant
00:32:46.399 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=E68CA6DB3CAE4118BE9F9612BD3540A9
00:33:55.006 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:33:58.955 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:34:37.090 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=9DB394E443A3419FA0020BC9D1A92806
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDL,11,CCsCdlImsAccess::AuthenticateSubscriber: Cannot authenticate user: JOESMITH IMS Result Code: 1 on line 108 of file CdlIms/src/CsCdlImsAccess.cpp: Error: 0x80046505 Description: E_CDL_SP_EXEC_FAILURE
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDE,3,Authentication Failed for Subscriber 555123 (Src/CsCallSubscriber.cpp 2969)
00:34:50.404 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,-1,-1,An invalid password entered when trying to log into a user mailbox. Details - [].
00:36:29.331 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:36:33.484 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:44:53.444 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=FEB6975B82284F37A161CD66ECBA61C6
00:45:20.019 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:45:24.121 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
Thanks

Hello ebergquist,
As advised we could try to run a report before an upgrade was performed to verify if it will pull the information, which in the event it does we would be matching the bug, therefore access the CUC CLI and type the following command: file get install *
You will be required to have an SFTP available for the file transfer and port 22 open on the sftp client.
Once you receive the files you would need to check system-history.log, below is an example.
=======================================
Product Name -    Cisco Unity Connection
Product Version - 8.5.1.12900-7
Kernel Image -    2.6.9-89.0.20.EL
=======================================
02/24/2013 13:35:02 | root: Boot 8.5.1.12900-7 Start
02/24/2013 16:03:45 | root: Install 8.5.1.12900-7 Success
Once you check the time stamp and date of the upgrade try to gather a report for a time range before the upgrade was performed, even though they might be overwritten, there still could be a possibility that it succeeds.
If this bug is not the issue then you might want to take into consideration:
1. Make sure that the service ReportDB is [STARTED] in the output of the command: utils service list.
2. If you have Digital Networking on your server make sure there is no stalled replication. Go to RTMT (Real Time Monitoring Tool)> Syslogs> Select on the dropdown your server> Doble click on Application logs> CiscoSyslog. You can then do a manual search or sort with the filter option:
Severity: Error
App ID: CuReplicator
Hit apply. Below is an example:
Date: Feb 19 08:01:15
Machine Name: LAB1111
Severity: Error
App ID: CuReplicator
Message: : 1151681: LAB1111.corpnet2.com: Feb 19 2013 08:01:11.662 UTC : UC_UCEVNT-3-EvtReplicatorStalledReceiveReplication %[ClusterID=][NodeID=LAB1111]: Detected stalled replication receiving from location LAB1111. Waiting for missing USN 2222. This situation may indicate network connectivity problems.
3.Make sure that replication is working properly in the cluster. You can check them via the following commands: showcuc cluster status    and   utils dbreplcation runtimestate
For the TransferEx that you state changed to ceros -> TransferEx=0x00000000=S_OK , this is just a hexadecimal value that is returned stating that the transfer that took place during the call was successful, in this case the actual transfer was to the following destination -> TransferEx destAddr='715551231234', and was during a call to ->calledID='555123' , this does not have to do with the actual change of a transfer number performed by a user.
Those traces won't be enough you will have to additionally set: ConvSub, level 3   and CDE, level 16 so that you may see output in the traces as the example posted in the previous thread.
Traces would be the path to follow in order to verify the user that changed the transfer rule, as this is as i understand the goal your pursuing.
However if it is of any help, another way to get on hold of the numbers that were updated on the Transfer Rule is to use the User Data Dump tool, this information reflects changes regardless of whether it was done via TUI (Telephone User Interface) or GUI (Graphic User Interface). For more information on the tool go to:
http://ciscounitytools.com/Applications/CxN/UserDataDump/Help/UserDataDump.htm
Traces are extensive to be reviewed if done manually, however you can do a text search with a tool as Notepad ++ to look for keywords as "NewTransferNumber =" or "CDE,16,Transfer allowed", once you find this you check the call GUIDwhich is the reference number of the call and that exists during the entire length of the call, whether it is while a person is leaving a voicemail or the user is accessing his/her's inbox. This would speed up your search.
So as explained in the first thread you would then do another text search returning all possible matches with that callGUID.
Now if you get to the very beginning of the call you would see something like:
Line 13712: 18:58:05.156 |24720,CCIE-1-001,0C9C97BDF5F444F0B535D231C32DDCB4,Arbiter,-1,Incoming Call [callerID='2199' callerName='' calledID='6789' redirectingID='' lastRedirectingID='' reason=1=DirectlastReason=1024=Unknown] port=CCIE-1-001 portsInUse=1 ansPortsFree=1callGuid=0C9C97BDF5F444F0B535D231C32DDCB4
In this example you see my test user callerID='2199' calling the Pilot number 6789 which is the voicemail button
calledID='6789, and the what type of call is it whether Forward or Direct, when logging to voicemail you are going to see Direct which is going to match the Direct Routing Rules and send the call to the attempt sign in conversation.
The other approach is a rule out method between the Audit traces and the User Data Dump tool.
So let's say you have a baseline document that states all of the Transfer numbers for all users.
If the User Data Dump reflects a different number and the Audit logs do not show any change, starting from the time the baseline was created and the point of time where the number was changed, then you could deduce the change was done via TUI (Telephone User Interface). Unfortunately you wouldn't be able to tell who did the change in this case.
Nevertheless, remember that a user may have for example an Alternate Extension so the change might not necessarily be done from the office phone: "Alternate extensions can make calling Cisco Unity Connection from an alternate device—such as a mobile phone, a home phone, or a phone at another work site—more convenient. When you specify the phone number for an alternative extension, Connection handles all calls from that number in the same way that it handles calls from a primary extension (assuming that ANI or caller ID is passed along to Connection from the phone system). This means that Connection associates the alternate phone number with the user account, and when a call comes from that number, Connection prompts the user to enter a PIN and sign in."
Best regards,
David Rojas
Cisco TAC Support Engineer, Unity
Email: [email protected]
Phone: 1-407- 241-2965 ext 6406
Mon, Wed, and Fri 12:00 pm to 9:00 pm ET, Tue and Thu 8:00 am to 5:00pm ET
Cisco Worldwide Contact link is below for further reference.
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Import Export from CUE to Unity Connection 8+

After looking on CiscoUnityTools.com I see there is one CUE tool for importing Users and recorded name WAVs from CUE into Cxn 8+
Does anyone have a method for moving all the users AND voicemails from CUE systems into Unity Connection, any version?

Hi there,
There are no "free" tools that will migrate greetings and messages
from CUE to Connection.
The one place to look is @ Cisco partner CommonVoices "Now There";
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/solutions_partner_cuc.pdf
They do claim to;
Switch from any traditional
system to Cisco Unity®
Connection
• Greetings, name
announcements, existing
messages, and call trees are
all retained along with
message status
• 10 years of experience
migrating millions of mailboxes
worldwide
http://www.commonvoices.com/products/NowThere.php
What many people do when migrating to a new voicemail system is to leave the
old system accessible for a period of time so that users can access their old
messages. This is what we did when migrating from Octel to Unity Connection
Cheers!
Rob
"What you don't have you don't need it now"
- U2

Converting Octel Contributor mailbox app to Unity/Unity Connection ?

Similar Messages

Maybe you are looking for