Converting PAL to NTSC and making a DVD

I have a couple of .avi files, some are in PAL and others in NTSC, I wanna make a DVD in NTSC mode, How can I convert the files?

Hi
This is not easy and You need other programs to do this.
.avi.
You can use MPEG-Streamclip to convert the AVI files so that QuickTime can play them
and to streamingDV for iMovie.
This may work - I had great problems to get .avi into anything usably.
*PAL to NTSC or other way*
A. Commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
• MPEG Streamclip (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
Yours Bengt W

Similar Messages

Converting PAL to NTSC for 16:9 DVD

Hi guys,
Im trying to turn my HDV1080i PAL project into an NTSC DVD that will play on a TOSHIBA 19lv505 tv with a screen that's 16x10 inches - and retain it's 16:9 ratio.
I compressed my project in compressor then dragged it into DVD Studio Pro. 4 The dolby audio.dc3 file was recognised but the .m2v file was rejected, was it was a PAL format. It would only be accenpted if the the Video Standard settings were switched from NTSC to PAL - but ultimately im trying to make an NTSC DVD.
Do i convert my project by opening it in a new project with different sequence settings or copy it into a new sequence within the same project, but with new sequence settings? There's only a NTSC 4:3 option, not a 16:9 option.
Current sequence settings are:
HD (1440 x 1080) (16:9)
pixel: HD 1440x1080
Field Dominance: Upper (odd)
Compressor (HDV 1080i50)
Audio: 48Khz
Any thoughts?
Thank you.

so after an hour hunting around on the internet it seems two common options are Nattress or Advanced Format Conversion in Compressor.
i appreciate there is probably much already said on this issue, but any thoughts as to which avenue is the better use of time and money?
thanks.

Converting PAL to NTSC in FCP

How do I convert PAL to NTSC in FCP?

Hi
May be my Amateuristic way can be of help ?
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Re: Best options for exporting a sequence and making a DVD

I using iPad 2.

"Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?

Real World Experience - TIPS - Pal to NTSC and Authoring DVDS on both

I have just completed a DVD project.
It was shot and edited in Pal and then authored to both Pal and NTSC DVDS ( Pal for Europe - NTSC for Japan and USA)
Standards Conversion:
I used both compressor and graham Nattress' excellent G (for Graham?) Standards converter.
Compressor was a fast work around for a quick pal to ntsc conversion at ok quality. Since my footage is very demanding (lots of handheld heli shots, water housing footage)i imagine it was giving the converters a real work out).
The Nattress G converter was much slower but the results were as close to perfection as i would imagine a software solution can get. Obviously the extra render time was working extra hard to get the conversion looking good.
For anyone going down this path - For your master you just have to use the natress converter- thanks Graham - best $100 i have spent this year.
MPG2 encoding
i did this using compressor and it worked well.
Here is the rub - i THOUGHT compressor was not doing my MPG 2 conversion at acceptable quality - it was actually the lack of quality out of compressors fast and easy solution for pal - ntsc that was giving me banding on moving objects and color issues.
I suspect this may be where some people think they are coming unstuck with compressor. (go back and check you ntsc conversion relative to your original pal quality)
I hope this saves anyone else in my situation some time.
In summary - when working in PAL (ie you are shooting and editing in Europe or Australia)Your work flow should be - shoot and edit in Pal ,convert with Natress, encode with compressor (compressor 2.1 - i use 7.7 mbs max, 6.0 mbs av - 2 pass variable - use ac3 for audio) - which has actually been working well for me (despite various threads about issues with compressor)
Hope this come up nicely for anyone doing a search. Thank you to everyone who has helped me on the way and good night!

Rory85 wrote:
Ok cool, thanks Stan.
Re-doing the Encore stuff, as much as that would/will suck, it's not my worst fear.. the thing that scares me the most is the thought of re-doing all of the Premiere work again.. If an NTSC Encore project can convert a PAL Premiere working file to a NTSC DVD, I can live with re-working the Encore stuff.. And yea, Dynamic link takes care of all of the chapter markers, so that wouldn't be a big issue - it'd just be a matter of re-building the menus..
But yea, if anyone has a definite yes or no answer on whether or not Encore can turn a PAL Premiere project into a NTSC DVD, I'd love to know.. The person I'm doing the work for doesn't want to spend thousands of dollars getting PAL dvds printed etc unless we absolutely know it's going to be a complete re-start to get it to NTSC..
Thanks again,
Rory
Hi Rory.
It's not possible in Encore or Premiere.
The conversion process is a complex one & consists of changing the actual resolution from 720x576 to 720x480, which gives a very different shaped pixel as well.
Then it also changes the frame rate of the footage from 25 to 29.97.
The easiest way to do this with Adobe tools is to use Atter Effects, making sure that the AE render is locked to the duration of the composition - this is critical, or you will end up with footage at the wrong speed. All menus will need to be rebuilt.
Sorry I cannot give you better news.
As a general rule of thumb, if in doiubt - create & author in NTSC as there are almost no PAL setups that cannot output either pure NTSC or PAL-60, yet there are very few that can go the other way.....

Converting PAL to NTSC for a dvd

I have a quicktime PAL movie that I want to burn to a dvd to send to the US as NTSC.
It's just a short movie using 720 x 576 size and 25 fps.
When I set up iDVD it warns me just before burning that I am trying to burn an NTSC dvd using a PAL format media and I don't know if this will result in a poor quality or an unplayable movie.
Can anyone please advice how to change the PAL movie to NTSC in Compressor so that I can make a good quality version of the PAL file into an NTSC file?
Thanks a lot for any advice.

Hi
Just going from iMovie (PAL) to iDVD (NTSC) does work BUT VERY BAD RESULT
I do.
• In iMovie Export out as QuickTime full Quality QT.mov file
• Use JES_Deinterlacer - Google it - It's FREE
• Here I open the QT.mov and let it convert to NTSC - VERY GOOD - and save with a new name
• Open iDVD and make a NTSC project
• Now import the converted movie
• Burn
To make sure that it plays well in US I also do.
• Secure a minimum of 25Gb free space on internal boot hard disk - Others not interesting
• I use Verbatim
• I use DVD-R (no +R or +/-RW)
• I set in iDVD pref/Advance/burn speed down to x1
This has worked for me and been confirmed from sunny Calif.
Yours Bengt W

Burning converted PAL to NTSC movie file on to DVD

Hi.
I'm having a few problems based around standards conversion from PAL to NTSC. I have some old home movies (PAL footage from my time in Europe) which I have been editing in iMovie. I have (I think) successfully converted the finished project into an NTSC format. However, when I burn to DVD in iDVD I am getting nasty red and green vertical lines ruining the picture when played in my home DVD player. This disfiguration seems to be triggered or coincides with any peak in the audio.
Is this a PAL -> NTSC standards conversion problem? A problem with the file I am burning to my DVD through iDVD, or a problem with my home set up? Needless to say the movie plays fine on my Mac and my home set-up plays other commercial DVD's perfectly.
Any ideas?
Thanks and Happy New Year.
Tom

Hi tommycrops
Welcome to apple discussions. I suggest narrowing the issue down as much as possible ... one idea is to make a disc image to the desktop of the finished iDvd. Test playback with apple's dvd player. Assuming it plays as expected then burn to Verbatim Dvd-R at 4x.
Also make sure all energy saver controls (in system pref's) are set to Never while working within iDvd. Disconnect all external third party devices prior to burning the dvd.
If none of the above works for you then go back to your original iMovie project file, check all movie properties and try to open it within QT Pro/player prior to burning. You'll need to verify playback prior to burning.

Converted pal to ntsc movie stops 30 seconds short of end

Hi all,
I have to make a dvd for viewing in America and am making a NTSC version incase the pal version does not work.
For some reason after I have converted the sequence (to ntsc pal)in FCP and then dropped it into IDVD two things happens.
Firstly the Movie has a flicker of black in between every edit (which I could probably live with) but secondly it stops exactly 28 seconds from the end of the 2 minute 54 second second sequence.
Any thoughts would be appreciated.
Regards,
justin

Hi
I do it another way.
In FCE/P I work with same standard as recorded (eg PAL)
Save as Full Quality QuickTime .mov
• NOT Selfcontained
• NO QuickTime Conversion
Then I convert this movie in JES_Deinterlacer (Can also use MPEG Streamclip or
the program in FCP bundle to do conversions (Compressor 3,))
Now I start a NTSC DVD project in iDVD and burn my DVDs.
They play well in Calif. USA
Yours Bengt W

Converting PAL to NTSC using Compressor, FCP or iDVD?

Hi guys,
I'm currently editing some PAL footage from a Canon DSLR which has been compressed into an Apple Prores which measures 1920 x 1080.
I need to put my finished project on a DVD so it to play in the US.
Should I export to NTSC in FCP, Compressor or simply setup iDVD as an NTSC project and hope that dropping my completed PAL is converted into NTSC?
What are my options to convert my PAL footage into NTSC and at what stage should I do it?
Finally what NTSC video format would be ideal for HD video on DVD?
Thanks in advance!

You could pay to have a post facility do the conversion, which would give the best quality. OR, do your standards conversion in Compressor or in JES Deinterlacer.
Giving iDVD an NTSC 1080 Pro Res file may work well. Do a test on a short representative section of your movie and see. If it doesn't meet your expectations, go into Compressor and resize to 729x480 anamorphic (PAR of .84); turn on Frame Controls and set Resize Filter to Best. Submit and then bring that into iDVD.
No doubt you appreciate that all DVDs are SD and that the end product, while potentially quite good, is compromised in image quality compared to your high rez original. If you want higher resolution, you have two options: red laser AVCHD disks for videos <20 minutes or Blu Ray, which is a whole different kettle of fish.
Good luck.
Russ

Transfer PAL to NTSC and extract audio: Best Place in L.A.

I have a little record company. I'm going to release a video of a concert as a DVD and will ALSO release a CD of the same concert. I want to extract audio from the PAL (for the CD)at best quality for remastering.
I also want to Convert the PAL to NTSC so I can edit it in FCP. (I assume that's the best quality Video I can get under the circumstances. Is that so? Is there a better way? It's music, so it HAS TO BE in sync)
I will do the editing for the DVD master, and my mastering guy will deal with the music for the CD.
1. Can anyone suggest the best place in L.A. to do these transfers?
2. Can anyone suggest the best place in L.A. to author and replicate the DVDs?

Laurie,
I've put the word out to the LA contingent of FCP elitists about your question. Hopefully one of them will respond.
If you decide to go through a software based conversion, there is a thread over in the FCP forum that will be useful to read.
https://discussions.apple.com/thread/3650277?tstart=0
Good luck,
x

URGENT!! Converting PAL to NTSC

Hi all
I need a reply on this badly!!
I just [so I thought] converted a PAL Anamorphic FCP Movie to NTSC Anamorphic QT using the Standards Conversion NTSC Anamorphic Preset in Compressor. RESULT: The Aspect Ratio has changed BUT when imported into an NTSC project in FCP Item Properties says its frame rate is 25 fps and not 30 or 29.97 AND when dropped into an NTSC Sequence it requires rendering for the video and audio streams. [Using Compressor 2.01 & FCP 5]
PLEASE PLEASE HELP, EXTREMELY URGENT!!!
[email protected]

Just had a quick go taking a 4:3 pal clip (no anamorphic to hand) and outputted to Anamorphic NTSC and I got 30.12 fps! It seems something is up with compressor (search here)
If totally pushed for time try JES Deinterlacer its free, otherwise pop for
http://www.nattress.com/standardsConversion.htm
EDIT: It appears you must turn on frame controls (searching here) to get the frame rate corrected. You may want to set everything to the fastest since frame controls can take time to process
A bit more info:
http://discussions.apple.com/thread.jspa?messageID=1107697&#1107697
Message was edited by: i5m

Best options for exporting a sequence and making a DVD

Hello,
I have a sequence that is 79 minutes long with the following properties:
Vid Rate - 29.97 fps
Frame Size - 1440 x 1080
Compressor - Apple Int. Codec
Pixel Aspect - HD (1440x1080)
This project began with the intention of being a short video, which is my background, and I can usually deal with exporting issues for short videos. However, it is no longer a small project. This was unexpected, and I frequently find myself in over my head. I am at the point where I need to give small theaters copies to view for consideration for a real screening, and would like to ask the folks here some questions:
How would you export this sequence for viewing on a DVD? Export through QuickTime Movie (not conversion)? Wouldn't that make a file too large to create a DVD with iDVD? DVD is only SD, yes? How is that (watching on a DVD) taken care of, if at a later time I would want a DVD of this sequence to be in the best quality possible?
This is a lot of questions, and I hope not too vague. Thank you for your time, and thanks in advance for any help.

Hi
My notes on this
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R (plays on more even older DVD-players)
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
If problems:
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Exporting and making a dvd - the best way is . . . ?

I have just posted a question about subtitles, but now I just need to know from the experts out there what is the best/fastest
way to export your project and make a dvd. For years I've had issues with this - from it taking too long (up to 6 hours total
for a feature), to it not looking like it did in the sequence. Any links, suggestions, tips, anything would be so great! I've
got a crazy deadline and my export is unusable!

>This dvd plays in my computer, but not in my dvd player
Chances are you inadvertantly made an HD DVD instead of a normal DVD. DVD players will only play standard definition DVD discs. The HD DVD format was abandoned a few years ago by its developers, but HD DVDs will play in most later model Macs.
>Would you please tell me why you use Self-Contained and why others tell me not to use it?
I said you could chose either. Personally, I use a self-contained movie ... just so I'll have a finished copy of my edit that will play even if I delete the original media and render files. Reference movies will always need to have all of the original media and render files on the computer to refer to.
-DH

Copying Home video DVD, converting PAL to NTSC

I have a home video DVD in PAL format that I would like to convert to NTSC. I have tried to look up the settings in Disk Utility but that was no help.
Can this be done through iMovie? I don't have FCP so I understand I'm at a big disadvantage here. Any help?

Toast
VisualHub (Direct Download) - VisualHub is no longer being updated or supported.
Video Monkey Takes over from where VisualHub left off.
can do what you want to do.

How to convert pal to ntsc?, how to convert pal to ntsc?

Hi,
I recently purchased a video camera that records in pal and i imported the clips into imovie and edited them together and am just wondering what the process would be from here to convert this file to one accepted by north american companies (i.e ntsc) .
Thanks

Yes, although the vast majority of newer European DVD players and TVs have no problems with NTSC DVDs, the only way to be sure (well, almost sure) is to burn a PAL DVD. You can't legislate for the fact, however, that not all DVD players can play all DVD-R authored disks, but that's a seperate problem!
I generally use After Effects for quick and dirty (but good quality) standards conversion. Whatever you do don't just try exporting your project via Quicktime using a PAL as this will only change the colour space and not the frame rate or frame size. If you use QT to change frame rate it will simply repeat every fifth frame to get to 30fps which will give you jerky motion.
Here's a step by step guide to doing the conversion in Compressor 2, using "optical flow" to interpolate to get the extra frames :
http://www.macworld.com/2006/02/secrets/marchcreate/index.php?pf=1

Converting PAL to NTSC and making a DVD

Similar Messages

Maybe you are looking for