Converting Photoshop/Imageready CS2 files to FIreworks CS$
I recently upgraded from CS2 to CS4 (Windows). I understand
that ImageReady had been dropped in CS3. I have a web site that was
designed using Photoshop/ImageReady (CS2). It has plenty of
rollovers. When rolling over text, the text is underlined. In
ImageReady I created the rollovers by turning the layers on and
off. When the slices were exported, all them (the on/off rollover
graphics) were all exported at the same time. It doesn't seem like
I can create rollovers like that in Fireworks. Does anyone have a
solution? It seems you have to have a separate graphic to swap out.
In Imageready, I copied the layer of text, underlined it, then when
I created the rollovers using the web tools, I turned the layers on
and off. There were no external graphics to insert or to copy and
paste. I know you can create that rollover effect in Dreamweaver
using css but this site has strict guidlines and I don't think I am
allowed to do it that way. Any info on this matter is appreciated.
thanks,
LT
Thank you for your response and for the link, which by the
way, I already have a copy of that file.What I am trying to do is
to utilize what I have already done in Photoshop/ImageReady. My
files open fine in Fireworks, everything is there---all the layers,
etc. except for the rollovers. The information that you provided
tells you how to create rollovers using buttons or graphics. I am
not using buttons. I am using plain text. When you roll over the
text it becomes underlined.In ImageReady the way I did it was by
using layers. I created the rollovers using the available web tools
for that and I turned the layers on (for the underlined effect) and
off for the regular effect. I sliced the text and the background
that it is on. When the slices were exported all the graphics for
my rollovers were created. I did not have to create two separate
graphics. ImageReady did that for me. Here is the link of the web
site. https://www.nfc.usda.gov. so you can see an example of what I
am talking about. The top navigation and left and right menus are
done using ImageReady tools. This whole page is layed out in
Photoshop, then sliced in ImageReady and the graphics exported
(with the rollovers created). Each rollover is a slice. I hope I
didn't make this sound too confusing. :)
Thanks,
LT
Similar Messages
-
Can't convert Canon CR2 RAW files to photoshop CS2- please help!
I have a Canon EOS Rebel XT and am using Photoshop CS2 and can not open my Raw images. Canon saves the images as a CS2 file. I guess needs converting.. Please Help!!
Daag Kees,
>[Kees] DNG converter 4_3_1 don't convert my raw Leica M8- images to digital negatives files that will open in Photoshop CS 8.0.1. (Camera raw 2.0).
Of course not. You need ACR (Camera Raw) version 2.4. Version 2.0 does NOT support DNGs.
After you correctly install ACR 2.4 according to the instructions on the download page and after you relaunch Photoshop, you need to Purge the Cache for each folder.
>[Michael] Simply run the DNG converter and point it at your M8 raw files and they will be converted to DNG.
Nope. Point the DNG Converter to a folder containing RAW files, not to the raw files themselves. The DNG Converter works on Folders containing raw files, not on individual files.
>What means "using Bridge" ?
Forget that. It does NOT apply to Photoshop 8.x. In CS3, you can have ACR hosted either by Photoshop or by Bridge. Photoshop 8.x doesn't even have Bridge.
Prettige Kerstdagen! -
Reading .CS2 files from Canon EOS 40D to Photoshop.CS Ver. 8.0
I have take pictures of a painting with a Canon EOS 40D for future printing onto canvas for resale.
I have Photoshop.CS version 8.0 which is not able to read the .cs2 files ("Could not complete your request because it is not the right kind of document")
I downloaded Camera_RAW_3.7.zip (Camera Raw.8bi - Jan. 30,2007) from Adobe and put it in the c:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats directory
I tried accessing the .cs2 files with the same results. (Note: there was also an old Camera Raw.8BI (Oct. 13,2003) file in the c:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats directory which I removed to another directory)
I then downloaded, installed an Adobe DNG Converer 9.0 and converted the images files from .cs2 to .dns.
I tried accessing the .dns files with Photoshop.CS version 8 with no success: ("Could not complete your request because this version of Photoshop does not supply the services required by this plug-in module")
Any other ideas?
We need to prepare this image soon with Photoshop.CS to have it printed on canvas for sale to a customer.
ThanksFirst of all, photoshop cs can only use up to camera raw 2.4, so you need to remove all the other camera raw 8bi plugins and install the camera raw 2.4 plugin for photoshop cs.
(you can only have one Camera Raw.8bi plugin in the photoshop plugins folder or photoshop doesn't know which one to use)
Adobe - Photoshop : For Windows : Camera Raw 2.4 update
The Camera Raw.8bi should go in
C:\Program Files (x86)\Adobe\Photoshop CS\Plug-Ins\File Formats (64 bit windows system)
or
C:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats (32 bit windows system)
Then you can use the dngs you converted using adobe dng converter 9.0 in photoshop cs.
It's possible you may have to set the compatibility in the dng converter Preferences to Camera Raw 2.4 and later when converting the canon 40d files to dng in order for photoshop cs to read them.
Sample canon 40d file downloaded and then converted to dng used in below screenshot came from here:
http://www.rawsamples.ch/index.php/en/canon -
This is most commonly due to installing Photoshop CS/CS2 <i>before</i> doing an archive and install of Mac OS10.3 or OS10.4.<br /><br />One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4.<br /><br />If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop.<br />Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2).<br /><br />Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder.<br /><br />---------------------------<br />Another solution courtesy Anne Shelbourne<br /><br />Open your Previous System folder. <br />Find "Adobe Unit Types". <br />Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/<br />Then reboot your Mac.<br /><br />---------------------------<br />However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.
The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it. -
Photoshop CS2: "file not compatible with this version of Photoshop" error
So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PMThis is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.
Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha -
Importing Multi-Layered Photoshop CS2 files...
Hello again everyone. I trust you are all well.
I am currently constructing some tutorials for my Video Editing class and I am trying to demonstrate how to import and use Multi-layered Photoshop CS2 files inside Final Cut Express 2.0.3.
Here is the problem:
My iBook is running Final Cut Express 2.0.3 but does not have Adobe Photoshop CS2 on it. My DELL PC is running Adobe Photoshop CS2 and I am creating my PSD's on that and then transfering those PSD's across to the iBook with either my USB stick or my iPod.
Now according to the Final Cut Express 2.0.3 Help file, "When you import a layered Photoshop File into Final Cut Express, the file becomes a sequence in your project".
However, when I import my PSD, that was created on my DELL in Photoshop CS2, into Final Cut Express 2.0.3, it does not import it as a sequence, but as a flattened still image.
Is this because I need to have Photoshop CS2 installed on my iBook for the PSD to be imported correctly as a sequence, retaining the layers, or is there a compatability issue with creating PSD's on a PC and then trying to import them into Final Cut Express 2.0.3?
Regards,
Justin Pamenter
Multimedia TeacherThanks for your quick reply Tom!
I had a feeling this might be the case after I did some more testing with Photoshop files created on a MAC. If I resave those PC Photoshop files on a Mac in Photoshop, they import correctly as a sequence into Final Cut Express.
Thanks again for the advice!
Regards,
Justin Pamenter -
Opening Photoshop CS3 psd files in Photoshop CS2 (Mac Tiger 10.411)
Is it possible to open Photoshop CS3 psd files in Photoshop CS2? After I created them in Photoshop CS3 I reset the preferences to maximize compatibility "always", then I resaved all the psd files. Do you think this will work? I have to open them in CS2 tomorrow at work...
Also, some old features may have changed in the new version. Specifically, I had some CS3 files from a client that had smart objects that did not open correctly in CS2.
As I recall, CS2 was able to open a flattened version of the file, just not fully layered with smart objects.
I actually had CS3 on my laptop, just not on the tower I wanted to work on, so I opened the files on the laptop, rasterized the smart objects, and saved. After this, CS2 opened the files with layers. -
I have Adobe Photoshop Elements 10. However it converts all my pdf files to Photoshop Elements 10 so I can not email them because no one can read them they are not pdf files anymore. What do I do?
photoshop elements and pd
If your program is Photoshop Elements (any version), you have posted in the wrong forum. Somehow your thread was posted in the Adobe Premiere Elements Forum (video editing).
Please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
But wherever your thread ends up, please give more details of your situation. I am not understanding "it converts all my pdf files to Photoshop Elements 10". You control the Save As.
ATR -
I have Adobe Photoshop Elements 10. However it converts all my pdf files to Photoshop Elements 10 so I can not email them because no one can read them they are not pdf files anymore. What do I do?
Nothing has been converted. You first need to convince yourself of this.
Start Adobe Reader (or Adobe Acrobat, if you have it). Use Open from the File menu. Pick one of your PDF files. Does it open OK? If not, what happens?
Ok, these emails. What exactly happens when trying to open them? -
CS2/W8 - Could not initialize photoshop because the file is locked
I just upgraded to Windows 8 64 bit last night. I had been running Cs2 just fine on Windows 7 64 bit for a few years now. In fact I used it last week. Now after the upgrade is complete, I get this error message when I try to launch CS2:
Could not initialize photoshop because the file is locked. use the properties command in the Windows Explorer to unlock the file.
Of course, there is no mention of which file is locked.
I tried a repair install, it didnt help, same error.HAve you tried resetting preferences? Start PS and IMMEDIATELY hold down the shift ctrl alt keys. Should get a reset window if fast enough.
-
Links between Photoshop/Illustrator/InDesign CS2 files
I create files in Photoshop CS2 and place them in InDesign CS2 files. Is there a way in Bridge (or elsewhere) to see which InDesign files a specific Photoshop file is linked to?
Your help is appreciated.
MJSo far so good with CS2, but I have not had to time to really test it in depth.
Installed Leopard onto an external hard drive connected to my iMac. If I have problems I can always boot back into Tiger from the internal drive. Once I feel safe the CS2 works fine with Leopard I will install it on the internal drive. I also have a mirror backup of the internal drive on a different external drive than the one with Leopard installed, double backup for now.
PS: The newer versions FileMaker were reportedly not compatible. I am still using version 7.5 which seems to work fine under Leopard.
I am fixing to get ready to install Leopard on the G4 iBook. Doing a backup of that hard drive first. -
Photoshop Imageready cannot read .mov files
This is just one big pain. I got a new computer and had to reinstall everything, after doing so i decided to go make a vid sig,
However now my photoshop imageready does not read/recognise .mov files, i check for about four hours and have been unable to find my answer,
Yes, i have quicktime (7.0 i think)
Yes, i have Divx (also 7 i think)
And as i cannot find a thread around here like this i thought i would post cause this is really ticking me off.
(oh yeah its photoshop 7.0, and i have never had this problem before)
Edit: Also the message that comes up is,
adobe imageready - could not complete this operation because this file is an unknown formatDid you apply the 7.01 updater to it?
-
Can a photoshop cmyk psd file converted to photoshop PDF be used online, or 1st convert to RGB?
Can a photoshop cmyk psd file converted to photoshop PDF be used online, or 1st convert to RGB? (the client requested 300 res. and is using it for their online magazine)
There should be no difficulty using CMYK online - all PDF viewers have to be able to convert to RGB for the screen. But I'd be very concerned about putting 300 dpi online. You should shrink it down to a suitable screen resolution.
-
How do I convert an illus CS5 file to a Photoshop CS5 file for printing purposes, maintaining layers and with the ability to have a separate layer to show cropping?
YOu export it from AI.
Mylenium
Maybe you are looking for
-
Sharepoint Online Tag Profile empty
Hello there. We have been facing the following problem in Sharepoint Online. We have created a document library and populated it with documents. For each document we have added some tags. We have also enabled "save metadata on this list as social tag
-
How can I get my password protection software to work?
Cannot see how the Trusteer Rapport software can be used with this version of Firefox, it used to sit beside the webpage address and could be turned on to protect passwords, now although it is loaded on both my Mac's it does not appear to be working?
-
Why do i have to always update flash player before i can preview page in a browser?
everytime i load a swf file into dwcs6, i need to update my flash player before i can use it? Why? how do i get round this so i dont have to update all the time? thanks
-
Data load - Customer and quotation
Hi I need to load customer data from the legacy into SAP using LSMW.. I found the standard program RFBIDE00 for this. Will this program help me load the data for all account groups ? My 2nd question is - Is there any standard prog/BAPI or IDoc to loa
-
Elements 10 and resizing canvas
When resizing the canvas for a photo in some but not all saved images the canvas extension color is greyed out. The particular photo is saved as a Tiff. Why is this and how can I solve the problem Thanks