Converting Powerpoint into Fully Accessable PDFs (Updated and Corrected)
I am trying to create a PDF of a PowerPoint file with full accessibility with no errors. I am currently using Microsoft Office 2010, and checking the web accessibility with Adobe Acrobat 9 Pro.
Advanced>Accessibility>Full Check
However when I bring it over to PDF from PowerPoint, none of the images retain or register as having alternate text. As being a PowerPoint, I find that a lot of the images that don't need alternate text, such as the various segments of the background, register as requiring alternate text. I have tried actually following the prompts and giving alternate text to some images, but they still register as not having any.
Can anyone please help?
Thanks
KCD123
You can try the solution in the thread linked below, but chances are it won't compress the PDF enough for email:
Reducing size of pdf in OSX Lion
Similar Messages
-
Converting Powerpoint into Fully Accessable PDFs
I am trying to create a PDF of a Powerpoint file with full accessability with no errors.
Advanced>Accessability>Full Check
However when I bring it over to PDF from Powerpoint non of the images retain or register as having alternate text. As being a powerpoint I find that a lot of the images that don't need alternate text, such as minor decorations, require alternate text, I need them to not register. I have tried actually following the promps and giving alternate text to some images, but they still register as not having any.
Can anyone please help?
ThanksYou can try the solution in the thread linked below, but chances are it won't compress the PDF enough for email:
Reducing size of pdf in OSX Lion -
My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.
Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access
-
Can you convert powerpoint into a responsive project?
can you convert powerpoint into a responsive project? how?
No. You cannot convert a PPT to responsive project.
Sreekanth -
I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??
You might try resetting the App Store application and clear the cookies via this menu:
as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
OT -
To convert Smart Form output to PDF format and send it via email.
Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
JohnRefer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies. -
Convert Excel into Password Protected PDF Files
Hello Aandi/Lenoard,
I believe you are the Adobe Forums administrators so I thought you guys are the right people to approach.
OTHERS ARE ALSO INVITED TO COMMENT ON THIS TOPIC.
I have C# desktop app which generates Excel files and our goal is to convert these excel files one at a time into password protected PDF files. We use a 3rd party software currently, but I am challenging myself into saying that I can use Adobe Acrobat 9.0 SDK to achieve what is required .
I have downloaded Acrobat 9.0 SDK and also have Adobe Professional 8.0(trail) in my development machine. Can you firstly tell me if this is possible and secondly what would be required on the client machines to run it?
THanks,
Andy"Encrypt with Password" is the policy name, not the policy id.
Did you try enumerating the policy object to see how to set it up? I ran this from the console to get the policy details:
var policy = security.chooseSecurityPolicy();
for ( var i in policy )
console.println(i + ": " + eval("policy." + i));
That will pop up your list of policies. Choose "Encrypt with Password" and hit Apply, which returned the following:
policyId: SP_STD_default
name: Encrypt with Password
description: This policy will allow you to set an open or modify password on a document.
handler: Adobe.Standard
target: document
Of course, all you really need are the policyId, handler and target. Make sure you read and thoroughly understand the security requirements documented in the API reference for this method as well. -
To convert Sap Script output to PDF format and send it via email.
Hi Friends,
Could any one please tell me, how to convert the Sap Script output to PDF format and send it via email. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
JohnPlese check this sample code from other thread.
REPORT zzz_jaytest .
Types Declaration
TYPES : BEGIN OF ty_pa0001,
pernr TYPE pa0001-pernr,
bukrs TYPE pa0001-bukrs,
werks TYPE pa0001-werks,
END OF ty_pa0001.
Internal Table Declaration
DATA : i_pa0001 TYPE STANDARD TABLE OF ty_pa0001, "For pa0001 Details
i_otf TYPE STANDARD TABLE OF itcoo, "For OTF data
i_content_txt TYPE soli_tab, "Content
i_content_bin TYPE solix_tab, "Content
i_objhead TYPE soli_tab,
Work Area Declaration
w_pa0001 TYPE ty_pa0001, "For pa0001 Details
w_res TYPE itcpp, "SAPscript output
"parameters
w_otf TYPE itcoo, "For OTF
w_pdf TYPE solisti1, "For PDF
w_transfer_bin TYPE sx_boolean, "Content
w_options TYPE itcpo, "SAPscript output
"interface
Variable Declaration
v_len_in TYPE so_obj_len,
v_size TYPE i.
Constants Declaration
CONSTANTS : c_x TYPE c VALUE 'X', "X
c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
c_otf TYPE sx_format VALUE 'OTF', "OTF
c_pdf TYPE sx_format VALUE 'PDF', "PDF
c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
c_bin TYPE char10 VALUE 'BIN', "BIN
c_name TYPE string VALUE 'C:\ZZZ_JAYTEST.PDF',"Downloading
"File Name
c_form(11) TYPE c VALUE 'ZZZ_JAYTEST'. "Form Name
START-OF-SELECTION.
Selecting the records from pa0001
SELECT pernr bukrs werks FROM pa0001
INTO TABLE i_pa0001 UP TO 10 ROWS.
Setting the options
w_options-tdcopies = 1 ."Number of copies
w_options-tdnoprev = c_x."No print preview
w_options-tdgetotf = c_x."Return of OTF table
w_options-tddest = c_locl."Spool: Output device
Opening the form
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = c_form
device = c_printer
language = sy-langu
OPTIONS = w_options
IMPORTING
RESULT = w_res.
LOOP AT i_pa0001 INTO w_pa0001.
Writting into the form
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAIN'
window = 'MAIN'.
ENDLOOP.
Closing the form
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = w_res
TABLES
otfdata = i_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Converting OTF data to single line
LOOP AT i_otf INTO w_otf.
CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
INTO w_pdf.
APPEND w_pdf TO i_content_txt.
ENDLOOP.
Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = c_otf
format_dst = c_pdf
devtype = c_printer
CHANGING
transfer_bin = w_transfer_bin
content_txt = i_content_txt
content_bin = i_content_bin
objhead = i_objhead
len = v_len_in
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
v_size = v_len_in.
Downloading the PDF File
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_size
filename = c_name
filetype = c_bin
TABLES
data_tab = i_content_bin.
The extension is put the it_mailpack-obj_name parameter of 'SO_NEW_DOCUMENT_ATT_SEND_API1'. -
Convert internal table data to pdf format and send mail to Users
Hi all ,
I want to convert the data available in internal table to pdf format and then send it to mail .
Please tell me wht are the fn modules available to convert the data from internal table to pdf and then send it mail .
regards
santosh .Hi Santosh
Sending mail with attachment report in Background
Content Author: Fernando Faian
I have read the hint about "Sending mail with attachment report".
It's great, but how can I make this function work in background??
I had that needed last year too. See attachment a function group with two functions. The second one has that functionality to send email or fax (SAP office) with attachment objects in background job using SO_ATTACHMENT_INSERT function.
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. "MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE 'X',
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE 'O',
c_objtp LIKE g_document-objtp VALUE 'RAW',
c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*" LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. "doesn't exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = 'X'.
lt_rec_tab-recesc = object_type. "This field for FAX/MAIL
lt_rec_tab-recnam = 'U-'.
lt_rec_tab-deliver = 'X'.
lt_rec_tab-not_deli = 'X'.
lt_rec_tab-read = 'X'.
lt_rec_tab-mailstatus = 'E'.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = '5'.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = 'X'
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" TABLES
*" LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. "doesn't exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = 'U'.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
Regards,
Sree -
This is so frustrating! I plugged my Iphone 4S into my computer to update it via Itunes and now it says I have to restore to factory settings and will lose all of my contacts, photos, and applications I have downloaded. All I was really wanted to do was delete photos that uploaded from my home computer and took up all the space on my phone! GRRRR I hate this
If you are using the iphone as designed then you should lose very little or nothing.
You should be syncing contacts with your computer regularly, so all of your contacts should be on your computer and you can sync them back.
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, most especially before any attempt to update.
You should be transferring all purchases made on your iphone to your computer: File>Devices>Transfer Purchases
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
TS1368 Can't fully access iTunes store and need some help. Error code 1202
I can't fully access the iTunes store. In iTunes, I can't view graphics on the main page; the text is not formatted; links result in a message that an unkonwn error has occurred (-1202).
Yuk, this one seems to be a windows issue IIRC.
-
Converting PowerPoints 22"x22" to PDF
For the obvious reasons, small file size and universal transportability, we're trying to document our products with .pdf files. Understandably, the simplifications neccessary for these benefits may come with some restrictions.
New drawing generation packages output directly into .pdf format. Because of the intricate nature of the drawing content, the standard drawing size has already been decided on as 22" x 34"- a standard D size drawing.
Old drawings from old drawing generation packages (already 22" by 34") have been scanned (.tif format), and can be converted to .pdf format. This is the largest size that can be scanned on a 22" scanner, and the files come in as portrait format.
In an attempt to edit the scanned drawings I read a 22"x34" portrait .tif into my Microsoft Powerpoint package. I have the ability to set the Powerpoint document "page size" to either a 34" wide, 22" high landscape document, or a 22" wide, 34" high portrait document. Unfortunately, when I invoke the Adobe PDF conversion tool, regardless of the condition of a myriad of settings, or whether in the portrait or landscape mode, the image is either reduced or cropped to a maximum length of 22" .
According to Adobe tech notes 328610 and 328620, page size may not be retained with the standard source application-located Adobe PDF converter. It was recommended that I create a virtual printer loaded with the universal PostScript printer driver, and first print the Powerpoint document to a Postscript file (.prn, or .ps), and then convert to .psd with the Adobe tool. Unfortunately, regardless of the condition of a myriad of settings, or whether in the portrait or landscape mode, the image is either reduced or cropped to a maximum length of 22" (the width of standard office printers).
I can take the original 22" wide, 34" high portrait .tif image, rotate it in Microsoft's Picture Viewer, edit it in Microsoft's Paint and then print the file to the virtual printer with the PostScript printer driver and create a .prn or .ps file, which when opened with the Adobe tool makes a perfect 34"wide, 22" high PDF file.
Is there any way to take advantage of Powerpoint's vast editing ability and the Adobe PDF conversion tools with drawings greater than 22" by 22"?Thanks for responding Bill. Setting page size in the Adobe PDF virtual printer is the point of the Adobe tech notes 328610, and 328620. Unfortunately, this isn't working for me above 22" by 22". Si if you want to try this yourself, create a simply drawing, say a rectangle in PowerPoint, but first set the PowerPoint page size to 22" by 22" in File/Page Setup/Custom. Print to a PostScript file and convert to PDF. See if you get the whole rectangle, and check the size of the PDF in properties. Then make the Powerpoint page and rectangle larger in one direction and do the same thing. I'm afraid the image will now be cropped or distorted.
-
Convert Pages into good quality PDF.
Hi,
I just made a poster in Pages. I converted the file to PDF by using the option: Share > Send by Mail > PDF.
Had never done it before, and don't know much about it, but it turned out great. I sent it to a publisher for printing. But he couldn't use the PDF file because it did not have a good enough quality. The file size is about 500 kB when the Pages size is 3,7 MB.
Is there a better way to get the pages file converted to PDF at the best quality?
Please help
Much appreciated.
-Lillian-I sent it to a publisher for printing. But he couldn't use the PDF file because it did not have a good enough quality. The file size is about 500 kB when the Pages size is 3,7 MB
Presumably the problem is that the poster includes one or more photographic images. A photographic image is a pattern of picture elements, technically termed pixels.
The pattern of picture elements has a particular density, defined at a point in the process before the photographic image is imported into the pagination software, in this case Apple Pages.
The density of a pattern of picture elements is measured by the number of picture elements across and the number of picture elements down in a square inch. The density is referred to as the resolution or DPI Dots Per Inch.
A display is not able to draw higher densities and usually resolution of around 100 DPI; higher resolutions are downsampled automatically. Thus there is no benefit to adding resolution if the drawing target is displays only.
A large format inkjet is able to draw at resolutions of around 1000 dots per inch and a prepress imagesetter is able to draw at still higher resolutions. If there is insufficient resolution, image detail is insufficient.
Because of sophisticated algorithms for creating pixel clusters of sufficient size to print on a press, and separated into the four process colourants, it is a bit dicey to define the universally right resolution.
Stochastic screening does not need as high resolution for visually satisfactory detail as some aproaches to screening, but in any case what the printer probably meant was that the image resolution should be increased.
Try importing an image resolution of 300DPI for colour images. This should work well in most cases.
/hh -
In Internet Explorer, I am able to install into the menu tool bar - Convert to pdf. Can I do the same with Firefox.
Secondly, when I tried to print to "Adobe pdf", the page does not fully represent the webpage?See if Adobe has a PDF Toolbar extension for Firefox.
Or, look into a PDF extension for Firefox, such as these extensions. <br />
https://addons.mozilla.org/en-US/firefox/addon/14979/ <br />
https://addons.mozilla.org/en-US/firefox/addon/5971/ <br />
https://addons.mozilla.org/en-US/firefox/addon/220850/ -
iPad App Store app said "20 updates". Attempted to update w/3G. Updated some, but now many apps say "waiting" and are frozen. I attempted to update then by attaching to computer Itunes Store. All it did was very quickly go thru the 4 steps and said, "Synched, OK to uplug." I clicked my ipad and then apps. It also said Update complete (or something like that). Now several apps on iPad are frozen and say "Waiting". Help!!
Oh a few other things I forgot.
The long winded back-ups!!!! JESSSSSSH! Although I think the latest update seems to have bit into this a bit.
Also why is it that sometimes when the iPhone is syncing it will not say on the actual iPhone that it is syncing. I see it's syncing in iTunes but the iPhone doesn't have the typical do not disconnect -syncing message!!! What's odd is I can see the new apps being updated to the iPhone and as long as I don't open any apps it will finish it's sync but the minute I open any apps the iPhone will lock-up!!!
Maybe you are looking for
-
Bex Query not passing all rows to Crystal reports
hello experts, i have created a bex query that shows all employees from the master data table and links to the cats table to show absence hours... in bex, all employees are showing and some of the employees have hours showing for sick time. this is k
-
Error in reading from excel file
hi, I have written a program which reads from excel file and based on the value of the column i have to do something. Everything is fine but when i run it, it produces an error message Exception: For input string: "851.0" the value 851.0 is acually t
-
How do I alphabetize a list in Pages 5.1?
I've found threads on how to do it in the old version of Pages, but I am having trouble now finding how to do it in the newest version. Any help? I've got my text into a table already.
-
Yosemite, Filevault, I accidently turned it on?? Help..
I didnt know what filevault is and I just turned it on without knowing what it is doing. It says that it is encrypting something and its going to take 1 day???? its using a lot of power and my hdd is making anoyying crackling noises. Its not loud.. I
-
Can't export MXF and preserve metadata
I want to take a file from the bin, export from MXF to QT, and preserve the metadata. Oddly, there seems to be no workflow in Adobe capable of doing this. I can't import the MXF straight into AME, because it's from the C300 which splits up the clips