Converting raw 9236 readings to strain readings

Hi All,
I have a system set up which records the inputs from 12 9236 modules through 2 cRIO chasis in FPGA mode. I am now in a position where I want to analyse the data, at the moment I have got the data in front of me in it's raw format. The trouble is I am not 100% sure what these numbers actually represent!!!!!! Do they represent Voltage values or something else?
The module is configured to return calibrated results (ie calibration mode: Calibrated) I guess this is merely tells the unit whether the module has been calibrated or not?
I have attached an output for my strain gauges and accelerometers (They need converting as well!)
Attachments:
Data output.jpg ‏328 KB
Data Read vi.png ‏105 KB

NOTE:
The data is not in an xls file, I just had to rename it so it would allow me to upload it!!!
Don't try adn open it in excel!
Attachments:
8-SS-Data.xls ‏4969 KB

Similar Messages

Open and converting raw in ps 7

how can i open and convert raw nef images from my 35mm nikon into pdf using ps 7? Raw is listed under OPEN as a category but i cannot make it happen.

You need to first open the NEF file in Photoshop, and if you are really talking about the very old version 7, there is every chance that will be a problem. I don't even know if Version 7 supported Camera RAW, but I think it did. So I am having to guess because of the age of the version you are using, but you will probably need to download the free DNG converter.
http://www.adobe.com/nz/products/photoshop/extend.displayTab2.html

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

Need a plugin to convert Raw files with CS 6 standalone version. 8.7.1 version of ACR is not compatible with CS 6 in non-cloud form.

We have a site license for CS6 for our company and for the past year have not been able to convert RAW files from our newer cameras using Adobe Camera Raw. We do not want to use the Cloud version as we work off laptops in the field and overseas and even our offices have only dial-up for internet access where we are located in Monterey.
Can anyone recommend a plugin raw converter so we can continue to batch process our files with CS 6?

The camera raw 8.7.1 plugin should work fine in the photoshop cs6 non cloud license version.
The only exceptions being if you have mac os x 10.6.8 or windows xp/vista, then 8.3 is the newest camera raw plugin that works.
Which operating system(s) do you have?
Have you tried Help>Updates from within photoshop cs6 to get the 8.7.1 camera raw plugin.
Here's an 8.7.1 camera raw plugin installer for photoshop cs6
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

How do I convert raw images with side car to Dng and

How do I convert raw images with side car to Dng and preserve the sidecar info in the DNG?
I have tons of raws + xmp sidecars that i want to convert to dng, because the raws are from different camera brands and i want to get everything simplified. so that i do not have to worry if I will be able to access the raws in the future, if I decide I want to rework some of the files.
T.I.A.

If the images are already in your catalog you can select them then choose Convert Photos to DNG from the Library menu. You'll be given the option of deleting the original raw files. Either way, Lr will only display the newly created DNG files.
The alternative, which is better suited to images not already in the catalog is to use the Adobe DNG Converter

Converting raw files into tiffs and preserving the orig. date created

How do I get the original date created to show up in folders when converting raw files into tiffs? Once converted the original date created is in the "file info" window but does not show up as the original date created in the designated folder. It is displayed as the same date as date modified.

Thanks Mylenium
As Mylenium has said, this information can be added later by various means. It will also depend on the software you are using on what date it is reading!
As an example there are:
The files date created
Photoshop schema DateCreated
EXIF schema DateTimeOriginal
XMP schema CreateDate
For an external tool you can use ExifTool http://www.sno.phy.queensu.ca/~phil/exiftool/
or you could try to get a script written in the Photoshop or Bridge scripting forums.

Batch convert Raw to jpg with EXIF data

I would like to batch convert RAW images files to jpeg format while preserving the EXIF data. Is there any way to do this with the built-in apps in OS X Mavericks?
This used to be possible with Preview.app using the "Export Selected Images..." command. However, as of Mavericks, that command does not correctly copy EXIF data for the individual images. Instead, the EXIF data for the first image is used in all of the exported images. So Preview.app is now pretty much useless for converting batches of RAW files.
Can anyone point me to a workaround in Preview.app, or an alternative way to do this conversion in Mavericks?
I should add that I don't want to import all my images into iPhoto. I prefer to use regular folders to organize my images rather than the walled library that iPhoto creates.

Andrew Shalit wrote:
I used iPhoto for many years and found it to be cumbersome and more trouble than it was worth. It did not let me manage, organize, rate, tag, and edit my photos in any way approaching convenience.
Hate to say this for the 3rd time, but use Canon's "DPP" (Digital Photo Professional).
With it you can "manage, organize, rate, tag, and edit [your] photos" as well as batch convert to jpeg or othet formats.

How do i convert raw to jpeg in aperture

How do I convert raw to jpeg in Aperture 3 ?

I find all this rather strange! I often convert RAW to Jpeg if I want to keep an image for reference but it doesn't merit or require the 8 to 10MB of the RAW file (on my computer, my external drive, or anywhere else). For example, I take photos of artefacts in museums, and I also photograph the labels/legends beside them, for reference. I can keep those solely as quite small Jpegs since I'm never going to want to print them.
(No, I don't want to switch settings on the camera while I do this - I'll only forget to switch back, and then have loads of low-res Jpegs that were meant to be glorious RAW).
In other software I've used, there's a batch convert that makes this very simple. Seems that in Aperture I'm obliged to export and then re-import. Not a big deal, but a slight pain in the arse all the same, and a little odd.
Anyway, thanks to the above posts, I now know how to do the export-import malarkey. I couldn't find it in the manual.
cheers,
Helen

HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto

Can someone please tell me how to convert RAW files to jpeg RGB 8 bit in iphoto on an iMac?

How are you trying to "export to Mypics"? The only way to get a Raw out of iPhoto is to export with the Kind set to Original.
Regards
TD

How to convert raw files from new fujifilm x-t1 ?

how to convert raw files from new fujifilm x-t1 ?

The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

DNG converter not converting RAW files from Canon 70D.

DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
in any case, cr 8.2 or better is able to convert your camera's raw files. why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

How to convert raw data to wav files??

Hi AnyOne,
Can anyone know how to do convert raw data in hex format into wav file format??
Please show some guideline.
Thank You.

Hi Craig,
Thanks for the reply.
I do follow according the the wav creation standard and save it as wav file. However, i still fail to read back the wav file.
I using LV8.2. Attach with my testvi and data. Please guide if i make any mistake in my testvi
Thx and Regards,
Simon76
Attachments:
data.txt ‏7 KB
testvi.JPG ‏39 KB
header.txt ‏1 KB

Convert RAW to jpeg

Hello,
I'm using Aperture to organize my photos and have been shooting in RAW. I'd say that out of 100 pics, I might take advantage of the RAW format to edit 5 of them. I'm new to photography and during the learning process have taken a lot of pics of, for example, my dog that I really don't need in RAW format but don't want to delete altogether. I intend to continue shooting in RAW, but would like to convert my older pics to JPEG as I've filled up my external hard drive that my library is kept on (I'm using a 2006 core duo macbook). I know the usual advice is "never convert raw to jpeg to save space, just buy a new hard drive," but I really don't need 500+ pics of my dog in RAW format, jpeg will be 100% fine, and don't want to shell out the money for a new hard drive right now (although eventually I will.)
My question is: is there a way to selectively convert my photos or even entire projects from RAW to jpeg and maintain the organization structure? I know I can export to JPEG, but then I have to re-import and re-organize them all, correct? Either way, I then have to go through and delete the RAW versions, right?
Thanks,
John

I have a desktop PC with 4 internal drives that I'm backing up my images to over my wireless network on a (somewhat) regular basis, so if/when the external does crash, i've got the images backed up. The problem is that I've only got a 60Gb in the laptop, and a 320Gb external that is partitioned to allot 90Gb for time machine and the rest shared between music and photos, which has filled up pretty quickly. I'm looking into a 1TB external for the future, but I really like my 320 western digital as it is USB powered and really great for on-the-go. Maybe I'll think about a smaller library on the 320 and the permanent library on the 1TB. In the meantime, I need to free up some space on the external one way or another.
Thanks,
John

Using photoshop elements 6.0 - converting raw photos files to dng, how/where do I add metadata?

Using photoshop elements 6.0 - converting raw photos files to dng, how/where do I add metadata?

Metadata can be added in Properties panel. select a file and hit Alt+Enter. It will open up Properties panel. You may drag drop tags on the media and do File > Write tags info to files to write tags in file metadata.
Thanks
Andaleeb

I am having problems converting raw files to jpeg for printing. I am using 90 quality, 300 resolutiong, srgb, no sharpening and no resizing. when u print to meijer the pic are a little grainy. can soneone pkease helo me understand what settings to use?

When I take my cd to meijer to print the pic are a little grainy. Not as crisp as they look on the computer. When I convert raw to jpeg I am using 90 quality 300 resolution, no resizing no sharpening, srgb. Can someone please help me understand what setting to use for printing. I want to be able to out my pic ok on a cd and take them to get prints.

kann527 wrote:
I am new to this so I am not sure what the file size is since I'm not resizing it.
The question asked about exported image size (height and width) in pixels, not file size. Your operating system can tell you, or if you import the exported image into Lightroom, then Lightroom can tell you in the Metadata Panel, set the dropdown to EXIF.
I am printing a 5x7. I know I have tried to print with long edge set at 1024 and set to 300 ppi and had the same result with the grainy ness.
If the exported file has a long edge of 1024, then you did resize the image, there no other way to turn a RAW in to a JPG with long edge 1024. In any event, 1024 pixels is probably not large enough to fill 7 inches, that's really 1024/7=146 pixels per inch (rounded-off), and could be the cause of the "graininess" that you see, although I would use the word "pixelization" to describe what you see. So I'm not sure we are talking about the same thing, but let's go with it for now.
The solution depends on your answer to the original question, and probably depends on a clarification of how you got the image to 1024 on the long edge even though you claim you didn't resize it.

Converting raw 9236 readings to strain readings

Similar Messages

Maybe you are looking for