Converting single ASM to RAC ASM

How i can convert single ASM to RAC ASM?

ASM1 is the name of single and clustered names as ASM1 +ASM2, now what is suggestion? I can shutdown single instance ASM. If ASM Is up , it should not delet , right???

Similar Messages

Convert ASM single instance to RAC ASM instance...

Hi, all
Im installing OracleDatabase with RAC and I got an error on the Database Configuration Assistant that says "The ASM instance configured on the local node is a single instance. To manage this instance as a single-instance ASM restart DBCA and select the single instance database option. To manage this instance as RAC ASM, convert it to RAC ASM first".
How I can convert it??
Thanks

See the link below for converting a single instance ASM to RAC ASM. The link is to the Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide for Linux. If your platform is not Linux, check the Install Guide for your OS.
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14203/cvrt2rac.htm#BABJDAJG

Single-Instance ASM to RAC ASM !!

At the moment i am in process to create a RAC ASM instance on two nodes. When i was creating ASM instance it gave me error that unable to connect to crsd on Node2.
So i manually added asm instance using srvctl on node2. It is registered with CRS but it is not online. I tried starting up by using crs_start or srvctl start asm but asm resource is down on both the nodes.
I have started up manually both the ASM instance and created some Diskgroups, Now i have to create a RAC enabled DB for which it is showing convert single-instance ASM to RAC ASM.
What needs to be done.

Hi
because the service ASM was added individually the crs stack is unable to recognise the clustering of ASM. In fact this has just made the ASM on two nodes function as two seperate ASM instances. They were never clustered. So i think convertion is one option. I came here while looking for one such doc. My 10.2.0.1 RAC install on windows 2003 went on a toss.. while dbca was trying to set up the clustered ASM and configure the instance, the primary node crashed and when it was recovered, i could notice the ASM instance is created on one node only.. When i try to invoke dbca again, neither am allowed to create an ASM instance for RAC/convert the existing one to RAC. Until now what I have found is that if such case arise, the quicker way is to revert everything back, clean up the server of clusterware and re install every thing... but before am looking for my options..
does any body have an idea? please share
sarat.

Convert Single İnstance To RAC

Hii All
I making some test in order to convert single instance to RAC.In the scenario;
1.Crs Installed on machine.Asm disks created (Node1)
2.Oracle database software installed with rac option on Node1 .but only with binaries no database has been created.
3.An auixilary instance created in Node1.
4.On Standalone machine Database copied via Rman Clone Active database feature to node1 in asm
5.Cloned database is working correctly on node1 as Standalone
6.Run dbca on Node1 and select single instance,select create template from running database and template saved
7.Run dbca again on Node1.Select create rac enabled database, template selected as saved before.
Database created successfuly in crs environment but dbca creates fresh database no data has been preserved
This convert way is possible ? Where am I wrong ?Why dbca erase all data and create new database ?
Which do you advise to me to perfom convert scenario ?
Crs and Oracle 11gR2 on Centos.
Best Regards

Hi Eb;
What is db version? What is OS?
Please see below notes which could be helpful for your issue:
How To Convert A Single Instance Database To RAC In A Cluster File System Configuration [ID 208375.1]
How to Convert 10g Single-Instance database to 10g RAC using Manual Conversion procedure [ID 747457.1]
Regard
Helios

Convert single instance in Rac

Hello experts, I have already configured a cluster database between two nodes with a RAC database named Cars. Also I have a single instance database named Persons in the first of the nodes. Now I need convert this single instance(Persons) in a Rac database, that is I want to have two RAC database(Cars and the new Persons).
Thank you very much in advance.

Oracle provides following methods to convert a single instance database to RAC:
Grid Control
DBCA
Manual
RCONFIG(from 10gR2)
refer this link:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html(manual method)
http://oracleinstance.blogspot.com/2009/12/convert-single-instance-to-rac-instance.html(rconfig method)
http://onlineappsdba.com/index.php/2009/06/24/single-instance-to-rac-conversion/(using dbca)
http://oracleinstance.blogspot.com/2010/07/converting-single-instance-to-rac.html(using dbca)
for converting your filesystem to asm use RMAN:
refer: for converting the non-asm files to asm files using the steps as shown in the link
http://oracleinstance.blogspot.com/2009/12/migrate-from-database-file-system-to.html
hope, this helps you.
Rajeshkumar Govindarajan,
Oracle DBA,
http://oracleinstance.blogspot.com

Oracle 11gR2 RAC (convert single instance to RAC)

Hi,
Using Metalink Doc [ID 747457.1] I have converted single instance database running on 11gR2 to RAC (2 node) database 11gR2 with ASM. Its running fine, I am able to see the instances running on both nodes. But I am unable to login to the instance. It is connecting to ideal instance., but the instance is already running
oracle@hublhp1:/home/oracle$ export ORACLE_SID=cadtest1
oracle@hublhp1:/home/oracle$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Tue Nov 2 11:23:43 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
oracle@hublhp1:/home/oracle$ srvctl status database -d cadtest
Instance cadtest1 is not running on node hublhp1
Instance cadtest2 is not running on node hublhp3
oracle@hublhp1:/home/oracle$ ps -ef | grep pmon
oracle 2407 1 0 15:28:21 ? 0:27 asm_pmon_+ASM1
oracle 4125 1 0 15:51:18 ? 0:36 ora_pmon_cadtest1
oracle 4973 3295 0 14:31:13 pts/1 0:00 grep pmon
oracle@hublhp1:/home/oracle$
I am able to stop/start the database using SRVCTL but I am not able to login to this instance. Can anyone please help me to find the issue or where & what to look at.
- Mano

Thank you so much, I did the following, but I still have the same issue, the instance is running on both nodes, but I am unable to stop/start the database using SRVCTL and I am unable to login using SQLPLUS.
oracle@hublhp1:/home/oracle$ *srvctl modify database -d cadtest -n cadtest -o $ORACLE_HOME -p +asmcdb01/cadtest/spfilecadtest.ora -a ASMCDB01,ASMCFR01*
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl config database -d cadtest -a
Database unique name: cadtest
Database name: cadtest
Oracle home: /app/oracle/rdbms/product/11.2.0
Oracle user: oracle
Spfile: +asmcdb01/cadtest/spfilecadtest.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: cadtest
Database instances: cadtest1,cadtest2
Disk Groups: ASMCDB01,ASMCFR01
Services:
Database is enabled
Database is administrator managed
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl stop database -d cadtest
PRCC-1016 : cadtest was already stopped
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl status database -d cadtest
Instance cadtest1 is not running on node hublhp1
Instance cadtest2 is not running on node hublhp3
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ echo $ORACLE_SID
cadtest1
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Tue Nov 2 15:31:55 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> exit
Disconnected
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$

Convert single instance to rac on 11gr2

Hi,
I have 11gr2 database single instance running with ASM storage attached. i want to convert it into RAC on same server.
Can I take RMAN backup and restore in RAC ORACLE_HOME ? or do I need to go with rconfig or other steps?
Please let me know if have any good doc.
thanks

here is detail:
DB server =db1
installed oracle binary for non-RAC-oracle 11gr2.
installed oracle binary for rac-oracle and grid V 11gr2
dATABASE is running in non-rac oracle with ASM. I want to convert from Oracle single instance to RAC instance on same server on Linux RHEL5.4 platform.
Thanks

Verification of steps to convert Single Node to RAC

Hi Forum
I have a single node Oracle E-Biz 12.1.3 Installation.
We plan to convert this to a dual node RAC install and I wanted to run by the steps to perform this AND clone over the current production system to the new RAC system
(note this will not be using ASM - but will be based on NetApp NFS)
1. Install GRID 11.2.0.3
- installed acorss two nodes, Binaries can be shared
- voting disks / cluster rigistry MUST be shared
2. Install Database Software for RAC
- Binaries cannot be shared and must be installed on each node independently
3. Configure the GRID for database (database / listeners)
4. Clone over the stand alone system (clone database as RAC)
I will be using SCAN - and therefore would expect all the web services / concurrent manager nodes to point to the SCAN hostname as opposed to individual host names,
Are there any decent technical notes out there that will help please?
Is there any HUGE miss I have made here
Thanks in anticipation

Hi,
I belive googling "single node to RAC" should give you a lot of articles and you can select any article based on your source database version and new version (11.2).
Since it is EBS database, probabl posting question on EBS forums will give you answer faster because you will find a lot of apps DBAs who would already have done this.
Salman

How do we clone a database from RAC/ASM to RAC/ASM?

Is there a best practice or recommended recipe for cloning from a RAC/ASM instance to another RAC/ASM instance? We've done single instance cloning in the past with RMAN and it looks like grid control does something similar -- until we try to clone from one Exadata cluster to another. Surely this is now a common procedure...?
much thanks,
Gary

Hi,
I would not use cloning with 11.2. anymore.
Though this will work (you have to take care of copying some more stuff though, like the gpnp profile), simply using the "addnode.sh" which works in silent mode in 11.2. is a lot easier.
Re: Any issues to add 3rd node to 11gr2 grid with 11.2.0.2 and 10.2.0.4 homes?
Regards
Sebastian

FRM-40735 after converting single database to RAC

FRM-40735 and no ORA errors during connecting to rac via forms, but via plsql developer it works!
tnsnames and listener:
FUNTIK =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FUNTIK)
FUNTIK2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FUNTIK)
(INSTANCE_NAME = FUNTIK2)
FUNTIK1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FUNTIK)
(INSTANCE_NAME = FUNTIK1)
LISTENERS_FUNTIK =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
1 node listener:
LISTENER_RAC1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = some_ip_address)(PORT = 1521)(IP = FIRST)
SID_LIST_LISTENER_RAC1 =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db)
(PROGRAM = extproc)
2 node listener:
LISTENER_RAC2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = some_ip_address)(PORT = 1521)(IP = FIRST)
SID_LIST_LISTENER_RAC2 =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db)
(PROGRAM = extproc)
)

FRM-40735 is raised when there is a trigger violation correct? Are you sure that the error is related to your connection to the Cluster? Do you have any more detail on the Forms error?

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

How to convert single instance10g db to 11gR2 RAC with ASM

Hi,
I need your help to decide the plan about how to convert single instance 10g database to 11gr2 rac with asm.
I can have about 6 to 8 hours of downtime to upgrade and move to rac with asm.
db size is about 1.5tb and on AIX.
here is my plan....
1) install 11gr2 rac with asm on two nodes
2) verify rac installation and clustered asm
3)install 10g oracle binaries( yes 10g )
4) shutdown production db ( machine prod )
5) make copy of production and restore on 1st node ( using shadow image , so it's quick and its file system )
6) upgrade db to 11g ( still of file system )
7) after successful upgrade, move to asm ( rman backup )
8) add another node
does it look okay ? OR is there a better approach to save time?
can someone help me ?
Thanks...

Thanks ...
So here is what I thought... suggest if something is not right...
1) install 11gr2 grid infra on node A and B with ASM
2) stop CLUSTER ON BOTH NODES.
3) shutdown prod db on 10g ( downtime starts )
4) take rman cold backup
5) restore rman backup on node A on ASM ( as if single instance 11g , no rac parameters )
6) mount and run upgrade script for 11g, then open db with 11
7) after successful upgrade, shutdown db node A
8) change all rac related parameters, spfile,undo,redo for rac environment on both nodes
9) open db in rac environment
can I do this way ?
My only question is, even though I installed rac on node A and B, in step 5 and 6 I'm using only node A as if it is single instance. Is it possible ?
if it is then I'm good to go...
Thanks for all suggestions.

Moving RAC/ASM to single-node non-rac SET NEWNAME not working

Good morning,
I'm trying to restore a rac/asm database to a non-rac environment to simulate disaster recovery under worst-case circumstances.
Here is as faras I have been able to get
1) Restored pfile
2) modified pfile to remove references to RAC settings (note, did not set db_file_create_dest, db_file_name_convert, etc)
3) Restored controlfile successfully
4) Mounted database
At this time I run the following rman script which covers all temp and datafiles (there's some skipped numbers where datafiles have been removed previously)
run {
set until time "to_date('2009/11/29 03:00:00','YYYY/MM/DD HH24:MI:SS')";
set newname for tempfile 1 to '/mnt/data/oradata/pmi/temp_1.dbf';
set newname for datafile 1 to '/mnt/data/oradata/pmi/system_1.dbf';
set newname for datafile 2 to '/mnt/data/oradata/pmi/undotbs1_2.dbf';
set newname for datafile 3 to '/mnt/data/oradata/pmi/sysaux_3.dbf';
set newname for datafile 4 to '/mnt/data/oradata/pmi/undotbs2_4.dbf';
set newname for datafile 5 to '/mnt/data/oradata/pmi/undotbs3_5.dbf';
set newname for datafile 6 to '/mnt/data/oradata/pmi/users_6.dbf';
set newname for datafile 7 to '/mnt/data/oradata/pmi/atend1_7.dbf';
set newname for datafile 8 to '/mnt/data/oradata/pmi/atendidx1_8.dbf';
set newname for datafile 9 to '/mnt/data/oradata/pmi/cwmlite_9.dbf';
set newname for datafile 10 to '/mnt/data/oradata/pmi/datafeedsidx1_10.dbf';
set newname for datafile 11 to '/mnt/data/oradata/pmi/drsys_11.dbf';
set newname for datafile 12 to '/mnt/data/oradata/pmi/dynamic1_12.dbf';
set newname for datafile 13 to '/mnt/data/oradata/pmi/dynamicidx1_13.dbf';
set newname for datafile 14 to '/mnt/data/oradata/pmi/intermedia_14.dbf';
set newname for datafile 15 to '/mnt/data/oradata/pmi/notesidx1_15.dbf';
set newname for datafile 16 to '/mnt/data/oradata/pmi/odm_16.dbf';
set newname for datafile 18 to '/mnt/data/oradata/pmi/pacific_data_large_18.dbf';
set newname for datafile 19 to '/mnt/data/oradata/pmi/pacific_data_medium_19.dbf';
set newname for datafile 20 to '/mnt/data/oradata/pmi/pacific_data_small_20.dbf';
set newname for datafile 21 to '/mnt/data/oradata/pmi/pacific_data_xlarge_21.dbf';
set newname for datafile 22 to '/mnt/data/oradata/pmi/pacific_index_large_22.dbf';
set newname for datafile 23 to '/mnt/data/oradata/pmi/pacific_index_medium_23.dbf';
set newname for datafile 24 to '/mnt/data/oradata/pmi/pacific_index_small_24.dbf';
set newname for datafile 25 to '/mnt/data/oradata/pmi/pacific_index_xlarge_25.dbf';
set newname for datafile 26 to '/mnt/data/oradata/pmi/pmi_data_large_26.dbf';
set newname for datafile 27 to '/mnt/data/oradata/pmi/pmi_data_medium_27.dbf';
set newname for datafile 28 to '/mnt/data/oradata/pmi/pmi_data_small_28.dbf';
set newname for datafile 29 to '/mnt/data/oradata/pmi/pmi_data_large_29.dbf';
set newname for datafile 30 to '/mnt/data/oradata/pmi/sysaux_30.dbf';
set newname for datafile 31 to '/mnt/data/oradata/pmi/pmi_data_xlarge_31.dbf';
set newname for datafile 32 to '/mnt/data/oradata/pmi/pmi_index_large_32.dbf';
set newname for datafile 33 to '/mnt/data/oradata/pmi/pmi_data_medium_33.dbf';
set newname for datafile 34 to '/mnt/data/oradata/pmi/pmi_index_medium_34.dbf';
set newname for datafile 35 to '/mnt/data/oradata/pmi/pmi_index_small_35.dbf';
set newname for datafile 36 to '/mnt/data/oradata/pmi/pmi_index_xlarge_36.dbf';
set newname for datafile 38 to '/mnt/data/oradata/pmi/portal30_38.dbf';
set newname for datafile 39 to '/mnt/data/oradata/pmi/portal_app_helpdesk_39.dbf';
set newname for datafile 40 to '/mnt/data/oradata/pmi/static1_40.dbf';
set newname for datafile 41 to '/mnt/data/oradata/pmi/staticidx1_41.dbf';
set newname for datafile 42 to '/mnt/data/oradata/pmi/tools_42.dbf';
set newname for datafile 43 to '/mnt/data/oradata/pmi/xdb_43.dbf';
set newname for datafile 44 to '/mnt/data/oradata/pmi/pmi_index_small_44.dbf';
set newname for datafile 46 to '/mnt/data/oradata/pmi/pmi_index_medium_46.dbf';
set newname for datafile 47 to '/mnt/data/oradata/pmi/pmi_data_small_47.dbf';
set newname for datafile 48 to '/mnt/data/oradata/pmi/pmi_index_large_48.dbf';
set newname for datafile 49 to '/mnt/data/oradata/pmi/pmi_index_xlarge_49.dbf';
set newname for datafile 50 to '/mnt/data/oradata/pmi/system_50.dbf';
set newname for datafile 52 to '/mnt/data/oradata/pmi/pmi_data_xlarge_52.dbf';
set newname for datafile 54 to '/mnt/data/oradata/pmi/pmi_index_medium_54.dbf';
set newname for datafile 55 to '/mnt/data/oradata/pmi/acctdb_data_55.dbf';
set newname for datafile 56 to '/mnt/data/oradata/pmi/acctdb_index_56.dbf';
set newname for datafile 57 to '/mnt/data/oradata/pmi/pivot_data_57.dbf';
set newname for datafile 58 to '/mnt/data/oradata/pmi/pmiaudit_data_58.dbf';
set newname for datafile 59 to '/mnt/data/oradata/pmi/pmiaudit_indx_59.dbf';
allocate channel D1 device type disk;
restore database;
switch datafile all;
release channel D1;
When I run this I get the following:
creating datafile fno=3 name=/mnt/data/oradata/pmi/sysaux_3.dbf
released channel: D1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/09/2009 09:32:33
ORA-01119: error in creating database file '+PMI2'
ORA-17502: ksfdcre:4 Failed to create file +PMI2
ORA-15001: diskgroup "PMI2" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
I noticed that it's trying to create the datafile. Shouldn't it be giving me a "Restoring datafiles from backup piece" clause? Also it appears to be trying to recreate the datafiles in their old location. Any thoughts on how to get around this.
Using the db_file_name_convert does allow me to restore files to the filesystem, but they use names such as "omf_*" and I'm not sure if it's converting the files properly from ASM format.
Thanks!

Hi,
I assume your problem is either in your pfile ( but you indicate you have removed all RAC settings), or in your control file.
I would recommend to remove the control files and create them later as soon as the datafiles have been restored, using the commands:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "OMST01" NORESETLOGS FORCE LOGGING NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 100
MAXLOGMEMBERS 2
MAXDATAFILES 1024
MAXINSTANCES 8
MAXLOGHISTORY 10210
LOGFILE
< your logfiles >
DATAFILE
< your datafiles >
CHARACTER SET <your character set>;So the steps are
Startup nomount with the pfile
Restore the datafiles using rman
Shutdown the database
Use above script to create the control files
It is possible you need to use the RESETLOGS option instead of the NORESETLOGS
HTH

R12 Cloning RAC ASM to Single

Hi,
customer has 3 environments: 2 single (dev and pre) and 1 RAC-ASM (prod). We are doing the first complete refresh from PROD to PRE, then from RAC to Single, following Note Cloning Oracle Applications Release 12 with Rapid Clone [Article ID 406982.1] , which has a reference to Cloning an Oracle RAC System, which refers to follow Note Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1].
Following this Note, you have to create a Database Image in an stage directory, then you need unless the same database size as free space for this db image. This is not an option for very big application databases, then our idea is not to create the db image, but cloning database separatelly, following steps in Option6 in cloning Note 406982.1.
The question is, we have to refresh DB and app tier from PROD (RAC ASM) to PRE (single), colud we ignore Note " Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]" and follow Clone Article ID 406982.1 specially Option 6, recovering PROD database separatelly with rman duplicate or we have to follow Note 559518.1 and create a db image? Any experience cloning R12 from RAC to single?
Thanks,
Alvaro

Hi All
Can any one provide step to step configuration for RAC to RAC cloning in EBS R12
How to clone multi tier (2 node application Tier) using adcfgclone ... Thanks in Advance.
Searched Below metalink notes
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
Regards
Subbu

RAC, ASM and Dataguard compatibility

We have a Dataguard setup with 3 node RAC. The primary is a 3 node RAC but the standby is a single instance. The ASM version is 10.1. Currently we have switchover the roles.
Can upgrade the ASM to 10.2 on standby then make it primary?
All I want to know is if we can have ASM 10.2 on primary and ASM 10.1 on physical standby?

The note for latest ASM [ 10.2 ] indicates a level of backward compatibility I believe
What version is the database ?

Converting single ASM to RAC ASM

Similar Messages

Maybe you are looking for