Converting .swf files into .mxml files

Hi,
I am working on a flex based project.
We need to developa a rich UI application using flex.
Our UI team is not comfortable with mxml.
But team is pretty comfortable with flash.
I was just wondering whether it is possible if UI team
creates UI screens using flash and provide us with .swf files for
the screens and we could convert them in to mxml file and will add
active scripting for dynamic behavior.
Thanks in advance
Regards
Tarun

No, you can't reasonably decompile a swf to mxml.
However, the Flash guys can create the components as SWCs,
which you can glue together with a little bit of mxml and AS.
There are some good docs on this subject.
Tracy

Similar Messages

How can I convert .swf file to exe file?

thanks

Hi
Thank for your choise.
If showing only white screen, please download the lastest version, v2.03.
http://www.bullrushsoft.com/download.html
This problem occurs in Win7 sp1, especially IE has been upgraded to v10.
Our SWF to EXE Converter must need the FlashPlayer plugin for IE, it 's not a atandalone program.
So it only 880KB.
Our online converter is the adobe flash player exe, it can be embed the swf into, and standalone, so its size > 4MB.
More details, please visit http://www.bullrushsoft.com/online.html
Best Regards.
2013-08-11
Bullrushsoft Support Team
From: mmshahid73
Date: 2013-08-11 02:52:01
To: Sandro_brs
Cc:
Subject: _How_can_I_convert_.swf fileto_exe_file?
Re: How can I convert .swf file to exe file?
created by mmshahid73 in Flash Ad Development - View the full discussion
Hi, I used bullrushsoft SWF to EXE converter, but the created EXE file showing only white screen, i think i need to add flash player also but i don't know how to add flash player duriing swf to exe conversion.
Because when i converted swf into exe from my pc, it showing size 880 KB where swf file size is 413 KB, onthe other hand, I convert the same online which is playing correctly but the converted file size is 4.57 MB.
Am i right?
Kindly help
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5583680#5583680
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5583680#5583680
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5583680#5583680. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Ad Development by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Converting .swf files to .exe files on a mac?

How can I convert .swf files to .exe file on a mac?
I am working in Flex, so if there is a way to directly export .exe files that would be even better, but either one would be great. Can't seem to find any answers on this.
Thanks a lot!

Have you tried asking in the Flex forum?

Unable to convert swf files into fla files

Hi,
I tried using Dreamweaver to convert a SWF file into a FLA file so I can edit it in CS 5. But when I right clicked the placeholder for the file, it doesn't have an "Edit in Flash" option. What am I doing wrong?
Thanks very much,
Rosemary

According to http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7f12a.html# WSc78c5058ca073340dcda9110b1f693f21-7acf
asset is reflected in Flash immediately.
Edit a SWF file from Dreamweaver in Flash
If you have both Flash and Dreamweaver installed, you can select a SWF file in a Dreamweaver document and use Flash to edit it. Flash does not edit the SWF file directly; it edits the source document (FLA file) and re‑exports the SWF file.
In Dreamweaver, open the Property inspector (Window > Properties).
In the Dreamweaver document, do one of the following:
Click the SWF file placeholder to select it; then in the Property inspector click Edit.
Right-click (Windows) or Control-click (Macintosh) the placeholder for the SWF file, and select Edit With Flash from the context menu.
Dreamweaver switches the focus to Flash, and Flash attempts to locate the Flash authoring file (FLA) for the selected SWF file. If Flash cannot locate the Flash authoring file, you are prompted to locate it."
But I don't see "Edit with Flash" option. Maybe because I have a trial version of Dreamweaver?

Converting SWF file for publication and secure distribution.

I'm looking for advise on how to securely publish .swf files created in inDesign CS6 How to build a launcher and how to convert into iPad and Android apps.

You can't do any of that with just ID. You need access to the Digital Publishing Suite and generate the relevant ePub formats and platform-specific packages.
Mylenium

Converting .swf file to .flv or mp4 for free?

Hi,
Does anyone know of a program that will allow me
to convert a .swf file to .flv or .mp4 for free?
I can only find paid software to do this.
Thanks,
pacecom

pacecom wrote:
Hi David,
MPEG Streamclip won't open .swf files on my computer. Any other suggestions?
Thanks,
pacecom
Could depend on where you got your .swf, too. The easiest way to obtain a useful copy of the video portion of a SWF file is to ask the creator to export it for you as a movie instead of native .swf which can contain tons of information that isn't really a movie.
http://www.mix-fx.com/swffileformat.html
http://en.wikipedia.org/wiki/SWF
bogiesan

Convert SWF file to HD video

Hi to all,
I have a big problem. I did a 10 second animation in Flash CS5 and exported to a swf file, but my client is asking me a to convert it to a video file with this requirements:
Size: HDTV 720P. (1280 X 720) pixels. 30FPS. (Frames per second)
Format: stream format: HDV-HD1. Stream Type: MPEG-2. Transport
Stream(TS). Aspect Ratio: 16:9. Britate Type: CBR (Constant Bitrate).
Number of passes: 1. Video Bitrate: 18300
I tried some conversion programs to do the job:
iWisoft Flash SWF to Video Converter
E.M. Magic Swf2Avi
Xilisoft Video Converter Ultimate 6
Total Video Converter HD
All of them recognizes the swf file fine, ( I set up the fla file with 1280 X 720 pixels and 30 fps) but when I try to export to a video format with the previous specifications using any of the programs, I get a very slow video, not smooth at all, and sometimes a large video with 2+ minutes (supposed to be only 10 sec). The swf file plays fine.
Any suggestions? thanks in advance.

Just open the original project FLA, file->export movie->AVI (uncompressed) and set the dimensions as you mentioned. After you get the movie exported from flash, convert that AVI (already the proper size) to the format you need.
If you have the Adobe Suite then you have Adobe Media Encoder. It supports MPEG2 (HDV-HD1 is just a specific set of settings for MPEG2). It's pretty darn easy to set up. No reason to pay for more software if you already have it.

Converting swf file to Gif/Jpeg/Png file

Hi,
I want to save a flash file(swf) in the server as gif/jpeg/png file. Problem is that if on the browser i want to take a snapshot of flash file then how can I convert that SWF file to gif file before sending it to server.

I used third party java library "Flagstone Software" the sample code for which is as follows:
File aFile = new File("Flashfile.swf");
byte[] bytes = new byte[(int)aFile.length()];
System.out.println("**Number of bytes in before encoding= "+bytes.length);
try {
FileInputStream imageContents = new FileInputStream(aFile);
imageContents.read(bytes);
imageContents.close();
FSMovieObject fsMov = new FSDefineJPEGImage(26,bytes);
byte[] b = ((FSDefineJPEGImage)fsMov).getImage();
ConstructingGif cGIF = new ConstructingGif(b);
catch (FileNotFoundException e) {
//throw new FileNotFoundException("MovieClip.swf");
catch (IOException e) {
//throw new IOException("MovieClip.swf");
The ConstructingGif class simply writes byte array to disk with file extension as gif or jpeg.
Now when I try to open the generated file through Photo Editor, I am being shown the error message as "Can't determine type".
Is this the problem of encoding...If so then what can be the solution?

Converting SWF file to MOV file

Need help, how can I convert a swf file to mov file for use with keynote?

http://www.versiontracker.com/dyn/moreinfo/macosx/33564
and more if you just google 'swf to mov'

How convert SWF file 11 version) to SWF older version ?

Hi ,
Sorry for my ignorance but since I would need to convert one SWF file (11 version)to another SWF file(10 version). Is it possible? Could anybody help me with that?
Thanks in advance
Best Regards
Alejandro

Hi Claus and Ned
First of all, thanks for your help.
On the other hand I I have tried with Sothink and ASV decompilers and I could not open the SWF yet. The ASV said me that it did not find the SWF file and the Sothink told me that SWF is corrupted. but I can it with Adobe Flash Player 11. Maybe both softwares did not support Flash 11.
Thanks for your time again
Alejandro
Pd: I could export the SWF file only like " preview" and to honest with you, I do not know waht this one means !

How to import swf files into project

I am new to flash programming. I have to make minor
modifications to an swf
file. I decompiled it to the fla file but all of the sprites
which are
themselves swf files did not end up in the fla file. how do I
get these swf
files back into the project so when I make the new swf file
it will be the
same as the original one?

Hi
I think 'Handbrake' will convert swf files used it for lots of converting but not tried it with swf recently, its available for free download just give it a google.
Hope this helps

How to import swf files to FCPX 10?

Hi! I need to import a swf to Final Cut Pro x10. Does anybody know how to convert it?
Thanks!

Hi
I think 'Handbrake' will convert swf files used it for lots of converting but not tried it with swf recently, its available for free download just give it a google.
Hope this helps

Can i add play/pause button when playback swf file??

Hi all
i have a script to convert ms office docs to pdf then to swf files and display it in my web site, the problem is that the output files (swf file) contain each page of my documents in a separated frame and when i load the page there no possibilitie to control this file (play / stop) or (next/previous) buttons, the only way is to use the right click menu options.
i am asking if there are any solution to embed my converted swf files and control it.
thanks

Hi,
It sounds like you'll want to talk with the author of the script that builds the swf. If that's you, then I'd recommend reposting this question over on the Flash Professional forums.
Thanks,
Chris

How to convert swf to mp4

Please help me to how to convert swf format into the MP4!!!

Note that you use Adobe Media Encoder to create .mp4 files, not the After Effects render queue. You can add After Effects compositions to the Adobe Media Encoder encoding queue.

Convert .SWF

Does anyone know how I can convert .SWF files to either Quicktime or .AVI? Thanks, as always.

You can try Aunsoft SWF Converter, It can convert swf to avi with high quality,
I think it support Quicktime either.
You can download it, install and uninstall very easily!
http://www.aunsoft.com/flv-converter/

Converting .swf files into .mxml files

Similar Messages

Maybe you are looking for