Converting to PDF and saving to local system
I want to provide a button on the screen, onclick of which the current screen output should be converted in "pdf" format and the user should be able to save it onto his local system.
Can anyone tell me how to do it ??
what functions do i need to use to convert it to pdf and then to allow user to save on local system??
Hi,
This might be very helpful too:
http://www.go2pdf.com/
This faq is a bit what you want:
http://www.go2pdf.com/web-to-pdf.html
Eddy
Similar Messages
-
Help needed...Mail Merge in Word converting to PDF and saving
Hello,
I often have to and often will be required to in the future to produce loan documents via a mail merge in word, convert to PDF, lock and save individually with each individual investor's details recorded in the name of the saved file in PDF.
I have scoured the net and read forums and have tried installing macros but have had no success.
I would appreciate any help.
Thank you so much in advance.
Kind regards
Jess30 people have viewed my question; no reply yet Pleaseeeeeeee!!!!
-
Reg: HRforms converted to PDF and send email to individual employee
Hi Experts,
The requirement is convert the HR form output to pdf and send email to respective employee in standard transaction. I copied RPCEDTX0 to ZRPCEDTX0 and include RPCEDS09 to ZRPCEDS09, the changes need to be done for individual PERNR, I have modified the include as shown below.
CALL FUNCTION 'HRPY_PROCESS_SET_PERNR_STATUS' after this, i have written my code
* start of changes ARAFIQUE
DATA: formname TYPE tdsfname VALUE 'HR_ESS_PAYSLIP_TO_PDF',
fm_name TYPE rs38l_fnam,
pinfo LIKE pc407 OCCURS 0 WITH HEADER LINE,
pform type tt_pc408,
pform_l like pc408 OCCURS 0 WITH HEADER LINE.
IF xform[] IS NOT INITIAL.
pform_l = xform.
APPEND pform_1 TO pform.
pinfo-molga = '99'.
pinfo-forml = 'ZACC'.
APPEND pinfo.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = formname
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
pinfo =
pform = xform[]
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
* end of changes ARAFIQUE
I found out in internet that the smartform 'HR_ESS_PAYSLIP_TO_PDF' will convert to PDF and then i can send email to PERNRS.Hi Experts,
I have written the below code, the payslip is getting converted to PDF and it is getting saved in presentation server. I need to pick this file and mail, I created a customized function module for sending mail. I'm not able to send email to external addresses.
Please find my code below. I will post the function module later.
* start of changes ARAFIQUE
DATA: "formname TYPE tdsfname VALUE 'HR_ESS_PAYSLIP_TO_PDF',
"fm_name TYPE rs38l_fnam,
p_info LIKE pc407 OCCURS 0 WITH HEADER LINE,
"pform type tt_pc408,
p_form LIKE pc408 OCCURS 0 WITH HEADER LINE,
pdf_content TYPE xstring,
pdf_fsize TYPE i,
lv_output_length TYPE i,
lt_binary_data TYPE STANDARD TABLE OF sdokcntbin,
it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
it_message LIKE solisti1 OCCURS 0 WITH HEADER LINE.
IF xform[] IS NOT INITIAL.
p_form[] = xform[].
p_info-molga = '99'.
p_info-forml = 'ZACC'.
p_info-pcols = 1.
p_info-psize = 1.
APPEND p_info.
CALL FUNCTION 'CONVERT_PAYSLIP_TO_PDF'
EXPORTING
p_info = p_info
IMPORTING
pdf_content = pdf_content
pdf_fsize = pdf_fsize
TABLES
p_form = p_form[]
EXCEPTIONS
empty_form = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = pdf_content
IMPORTING
output_length = lv_output_length
TABLES
binary_tab = lt_binary_data.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\Test\Testing.pdf'
filetype = 'BIN'
TABLES
data_tab = lt_binary_data
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
it_receivers-receiver = 'gmailid'.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
APPEND it_receivers .
it_message-line = 'Test for sending email'.
APPEND it_message.
CALL FUNCTION 'ZSEND_MAIL_ATTACHMENT'
EXPORTING
v_file_path = 'C:\Test\Testing.pdf'
v_subject = 'Test Mail'
TABLES
it_receivers = it_receivers[]
it_message = it_message[].
IF sy-subrc EQ 0.
COMMIT WORK.
* Push mail out from SAP outbox
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF. -
Report output to convert to pdf and mail it to recepient
Hi
I'm using the below coding for converting the output of the program to pdf and then mail it to the recepient.The coding works for background processsing only can i do the same for online.In the write statement i'm using the sy-repid my program name and when i get the pdf mail i'm getting the name of the program but instead i need to get the output of my program.Can any one help me in correcting the coding to get the output in pdf format.I know where i'm going wrong but this is the first time i'm working with this so new to this....It would be better if i could run the program and get the convertions into pdf through mail instead of background processing.....Please change the coding below to get the same.....
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE sy-repid.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Branch Revenue'.
gd_attachment_desc = 'Branch Revenue'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Branch Revenue,Profit and Commissions'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Branch Revenue'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Thanks in advance.....Hi
Below is the code I was used to convert the sap script( Sales Order) to convert to PDf and send as an attachment.
Dev/UDD Id : EUR-770416 *
Author : M.Sreeram Kumar *
Date : 08-Apr-07 *
Request : DU1K933766
Description: Send an order confirmation to the multiple user in a *
PDF format via Email. *
Change Log *
Author : *
Date : *
Description : *
Request : *
Print of an order confirmation by SAPscript
REPORT zrep_email LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE zrep_rvadtabl.
*INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE zrep_rvdirekt.
*INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE zrep_vedadata.
*INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
PERFORM zemail_process.
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = t_otfdata
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE zrep_rvadopfo.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_CHARACTERISTICS_PRINT
FORM ITEM_DELIVERY_CONFIRMATION *
If the delivery date is not confirmed, a text is printed *
FORM item_delivery_confirmation.
CHECK vbdpa-lfdat = space.
CHECK vbdpa-kwmeng NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_CONFIRMATION'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_DELIVERY_CONFIRMATION
FORM ITEM_PRICE_PRINT *
Printout of the item prices *
FORM item_price_print.
LOOP AT tkomvd.
komvd = tkomvd.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_QUANTITY'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_TEXT'.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRICE_PRINT
FORM ITEM_PRINT *
Printout of the items *
FORM item_print.
DATA: da_subrc LIKE sy-subrc,
da_dragr LIKE tvag-dragr.
CALL FUNCTION 'WRITE_FORM' "First header
EXPORTING element = 'ITEM_HEADER'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'WRITE_FORM' "Activate header
EXPORTING element = 'ITEM_HEADER'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
LOOP AT tvbdpa.
vbdpa = tvbdpa.
TVAG lesen um festzustellen ob abgesagte Positionen gedruckt werden
sollen
PERFORM tvag_select(sapmv45a) USING vbdpa-abgru
da_dragr
space
da_subrc.
IF da_dragr EQ space. "Print rejected item?
IF vbdpa-posnr_neu NE space. "Item
PERFORM get_item_serials.
PERFORM get_item_characteristics.
PERFORM get_item_billing_schedules.
PERFORM get_item_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_rejected.
PERFORM item_price_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM item_text_print.
PERFORM item_serials_print.
PERFORM item_characteristics_print.
PERFORM alternative_item.
PERFORM delivery_date.
PERFORM item_delivery_confirmation.
PERFORM item_billing_schedules_print.
PERFORM different_reference_no.
PERFORM different_terms.
PERFORM different_consignee.
PERFORM schedule_header.
PERFORM main_item.
ELSE.
PERFORM schedule_print.
ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'WRITE_FORM' "Deactivate Header
EXPORTING element = 'ITEM_HEADER'
function = 'DELETE'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_PRINT
FORM ITEM_REJECTED *
A text is printed, if the item is rejected *
FORM item_rejected.
CHECK NOT vbdpa-abgru IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REJECTED'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_REJECTED
FORM MAIN_ITEM *
A text is printed, if the item is a main item * -
Convert to PDF and Email crashes
Hi,
Encountered this problem when I right click on a word file and select "Convert to PDF and Email". It will always crashes with the error "Adobe Elements had stopped working" and the message indicating something to do with ADIST.DLL.
Had tried the followings but still the error persists.
1. Uninstall/reinstall Acrobat Pro XI. Had deleted anything related to "Adobe" including Flash player and still no avail.
2. Update the version to 11.0.07 and still the error is there.
3. Only happens when converting Word 2010 documents. Excel, Outlook and others are fine.
4. Valid licensed product from Adobe
5. Tried renaming the "Adobe Elements" folder and does not work at all.
6. Tried registering ADIST.DLL but encountered error.
I am running on a Win 7 Pro 64 bit PC and due to this error, when i try using mail merge with a word doc, it also crashes. Anyone can assist on this? Many thanks in advance!
TanCrashes with distiller are pretty rare. Fonts can cause distiller to crash. A bad graphic in a file can cause distiller to crash. Maybe a corrupt job options file. Create a simple text file (one page), no graphics. Use the Times New Roman font. Print to Adobe PDF instance. Does the error still happen?
-
I am trying to convert a pdf and it asks me to sign in and then i get a network error message
i am trying to convert a pdf and it asks me to sign in and then i get a network error message
Hi dougtimberlake,
We may need a little more information to go on to address the issue you're facing. Are you using ExportPDF to convert the PDF file--and from within Reader or directly via the ExportPDF website? It would also be very helpful to know the exact error message that you're receiving, and whether it happens with all the files that you try to convert, or just some. Please write back and provide a few specifics. In the meantime, please try the following:
Clear your browser cache (steps to do this vary by browser)
Check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the internet.
If the issue persists after the steps above, please try another web browser. A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/
I look forward to hearing back from you.
Best,
Sara -
I used to send embedded documents rather than as an attachmentfrom iPhoto. I simply took a PDF and saved it to iPhoto as a photo and then sent it as an embedded "photo" that was my document. Since changing to Lion, I cannot do it this way. Help!
I found the solution on another post by user rbii:
You can add this using Automator:
- Run automator, select File->New, chose Print Plugin
- From the PDFs part of the library drag "Render PDF Pages as Images" to the workflow on the right, set resolution to 200.
- From the Photos part of the library drag "Import Files into iPhoto" to the workflow section.
- Save the workflow
That should get you back this feature."
Save the workflow as "Save PDF to iPhoto" and you'll get that option back on the list. Hope this helps! -
Logo not printing properly in Invoice converted to PDF and emailed
Hello,
I am having a problem with a programming issue and have searched lots of forums but have found no solutions. We are on 4.7 and are not likely to upgrade any time soon. Therefore, I don't think any of the newer solutions are gonna work for me. I believe that I'm stuck using a couple of function modules to get t he job done. I am attempting to modify our Invoice Print program (uses SAPscript, not SmartForms) to have the output converted into a PDF file and then attached to an email that is then sent to the customer. Everything is working fine except for the company logo. It has been uploaded via SE78. It is a 24-bit bitmap file. I have played around with the DPI to have it appear correctly on the form. I added a FM GUI_DOWNLOAD step to verify that it is saved to my hard drive correctly. The PDF file saved t o my hard drive appears normally in Adobe Acrobat and Adobe Reader. So the problem occurs sometime after that. I have a routine wherein I convert is from 132 to 255 bytes. I then use FM SO_DOCUMENT_SEND_API1 to send it. When I swap the customer's email address to my own personal external emal address, the resultant email has an attached PDF file but the company logo is garbage. The top portion of the logo looks good and then at some point in the lower portion is appears as squiggly lines. This is not acceptable, of course. I have included the relevent code below:
DATA: ITAB_OTFDATA TYPE TABLE OF ITCOO WITH HEADER LINE.
DATA: ITAB_PDFDATA TYPE TABLE OF TLINE WITH HEADER LINE.
DATA: ITAB_DOCTAB_ARCHIVE TYPE STANDARD TABLE OF DOCS.
DATA: ITAB_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: ITAB_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: ITAB_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: ITAB_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: ITAB_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: BINFILESIZE TYPE I,
G_LINES_TXT TYPE I,
G_LINES_BIN TYPE I,
DOCDATA TYPE SODOCCHGI1,
WA_RESULT TYPE ITCPP,
WA_BUFFER TYPE STRING,
WA_OBJHEAD TYPE SOLI_TAB,
G_INVOICE(10) TYPE C.
CLEAR: BINFILESIZE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = BINFILESIZE
TABLES
OTF = ITAB_OTFDATA
DOCTAB_ARCHIVE = ITAB_DOCTAB_ARCHIVE
LINES = ITAB_PDFDATA
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\TEMP\TEST.PDF'
FILETYPE = 'BIN'
tables
data_tab = ITAB_PDFDATA.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-- Convert PDF from 132 to 255
LOOP AT ITAB_PDFDATA.
* Replacing space by ~
TRANSLATE ITAB_PDFDATA USING ' ~'.
CONCATENATE WA_BUFFER ITAB_PDFDATA INTO WA_BUFFER.
ENDLOOP.
* Replacing ~ by space
TRANSLATE WA_BUFFER USING '~ '.
DO.
ITAB_RECORD = WA_BUFFER.
* Appending 155 characters as a record
APPEND ITAB_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
REFRESH: ITAB_RECLIST,
ITAB_OBJTXT,
ITAB_OBJBIN,
ITAB_OBJPACK.
CLEAR: WA_OBJHEAD.
ITAB_OBJBIN[] = ITAB_RECORD[].
G_INVOICE = VBRK-VBELN.
SHIFT G_INVOICE LEFT DELETING LEADING '0'.
*-- Create Message Body Title and Document
CLEAR: ITAB_OBJTXT-LINE.
CONCATENATE 'Invoice'
G_INVOICE
'for Purchase Order'
PO_NUM
'is attached to this email.'
INTO ITAB_OBJTXT-LINE SEPARATED BY SPACE.
APPEND ITAB_OBJTXT.
CLEAR: ITAB_OBJTXT-LINE.
APPEND ITAB_OBJTXT.
CLEAR: ITAB_OBJTXT-LINE.
CONCATENATE 'Please see attached invoice.'
'Thank you for your business!'
INTO ITAB_OBJTXT-LINE SEPARATED BY SPACE.
APPEND ITAB_OBJTXT.
DESCRIBE TABLE ITAB_OBJTXT LINES G_LINES_TXT.
READ TABLE ITAB_OBJTXT INDEX G_LINES_TXT.
CONCATENATE 'Invoice' G_INVOICE
INTO DOCDATA-OBJ_NAME SEPARATED BY SPACE.
DOCDATA-EXPIRY_DAT = SY-DATUM + 10.
CONCATENATE 'Invoice for P.O.'
PO_NUM
VBDKR-NAME1_WE
INTO DOCDATA-OBJ_DESCR SEPARATED BY SPACE.
DOCDATA-SENSITIVTY = 'F'.
DOCDATA-DOC_SIZE = ( G_LINES_TXT - 1 ) * 255 + STRLEN( ITAB_OBJTXT ).
*-- Main Text
CLEAR: ITAB_OBJPACK-TRANSF_BIN.
ITAB_OBJPACK-HEAD_START = 1.
ITAB_OBJPACK-HEAD_NUM = 0.
ITAB_OBJPACK-BODY_START = 1.
ITAB_OBJPACK-BODY_NUM = G_LINES_TXT.
ITAB_OBJPACK-DOC_TYPE = 'RAW'.
APPEND ITAB_OBJPACK.
*-- Attachment (pdf-Attachment)
ITAB_OBJPACK-TRANSF_BIN = 'X'.
ITAB_OBJPACK-HEAD_START = 1.
ITAB_OBJPACK-HEAD_NUM = 0.
ITAB_OBJPACK-BODY_START = 1.
DESCRIBE TABLE ITAB_OBJBIN LINES G_LINES_BIN.
READ TABLE ITAB_OBJBIN INDEX G_LINES_BIN.
ITAB_OBJPACK-DOC_SIZE = ( G_LINES_BIN - 1 ) * 255 + STRLEN( ITAB_OBJBIN ).
ITAB_OBJPACK-BODY_NUM = G_LINES_BIN.
ITAB_OBJPACK-DOC_TYPE = 'PDF'.
CONCATENATE 'Invoice' G_INVOICE
INTO ITAB_OBJPACK-OBJ_NAME SEPARATED BY SPACE.
CONCATENATE G_INVOICE '.pdf'
INTO ITAB_OBJPACK-OBJ_DESCR.
APPEND ITAB_OBJPACK.
*-- Create Table of email recipients
CLEAR ITAB_RECLIST.
ITAB_RECLIST-RECEIVER = KNB1-INTAD.
ITAB_RECLIST-REC_TYPE = 'U'.
ITAB_RECLIST-COM_TYPE = 'INT'.
APPEND ITAB_RECLIST.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = ' '
SENDER_ADDRESS = 'arcredit @ companyname.com' <-- modified to comply with forum rules
SENDER_ADDRESS_TYPE = 'SMTP'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
* SENDER_ID =
TABLES
PACKING_LIST = ITAB_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = ITAB_OBJBIN
CONTENTS_TXT = ITAB_OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = ITAB_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-- Send the email immediately
WAIT UP TO 3 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
Thanks in advance for any and all advice.
Best Regards,
Nik von Ruden
Edited by: Nik Von Ruden on Nov 3, 2009 6:48 PM
Edited by: Nik Von Ruden on Nov 3, 2009 6:49 PMHi Friend ,
I hav gone through your code ... I have one Question why you are changing from 132 to 255.inside your program
if there is a purpose then , please can you change your company logo Image size accordingly and uploaded it into SAP mime repository using se78.then your program let it convert from 132 to 255. definely you will see some change's in the Logo,then keep on adjusting you can acheive you result.
sometime the Image size also plays major role ,which we need to modify the sizes of image.
I am giving you an link which is already there but still from myside , just compare the code .
Link: [http://www.scribd.com/doc/454814/SAPSCRIPT-to-PDF]
Regards, -
ME23N Script convert to PDF and send thru mail to the user created by
Hi,
I have created a custom PO SAP scirpt for the tcode ME23N and configured the same in tcode NACE Application 'EF' , output type 'NEU'
But the client requirement is to send this SAP Scipt PO converted to pdf & then send thru email to the user who created PO (ME23N)?
How do u get this functionality please let me know?
Regards,
AnilHello,
that is easy, you only need to keep the steps to do in mind:
1) find a suitable point to place in your code to do all this for you
2) create a FM that will convert your form into PDF (search a little, this has been done like zillion times here)
3) create a FM that will send the PDF stream (hex data which is accepted by the BCS class as the attachment data)
4) check the email customizing in your system
5) run and enjoy
All the parts has been done here many times, shouldn´t be a problem.
Otto -
Downloading JAR for temporary in-memory use or saved to local system?
Hi all,
I would like to be able to download and create a .jar file in memory, without writing it to disk, as an "option". My app should allow the user to reference an http://file.jar that gets "created" in memory on the client for temporary use, or they can optionally specify to download it and save it as a .jar file. I can't seem to find much info on either.
For the first case, basically, each time the app runs it should get the .jar file from the location specified, but without actually creating it on disk. Is it possible to download the binary of a .jar file from a web server and create it in memory so that it can be used? Or does it have to be stored on the local file system? If so, then I suppose I could use a "temporary" on disk .jar file, then delete it.
For the latter, how is a .jar file downloaded and saved to the local system?
Thanks.I don't fully understand your question, but I think
you want to use JarInputStream.
-Ron -
Converting to PDF and Inserting into another PDF?
Is there a way to convert a file to PDF and then insert that file into another pdf using JavaScript?
Thanks,
ToddHi Paul,
Thanks for the response, this is actually an adobe form that has been saved as an adobe dynamic XML pdf. Is there a way to do this in a form via code?
What I would like to do is attach a supporting document to the form and Print both the form and the supporting document with a simple click, is this possible?
Any help or a point in the right direction would be appreciated.
Thanks,
Todd -
Fax the output type and convert to PDF and then to save in UNIX Directory
Hi,
I wan to Fax the my sales order acknowldement and at the same time I want to convert that output into PDF and save in the UNIX Directory .
I also need the code for faxing the sales order acknowledgement.
Thanks in Advance
Moderator message: please search for available information/documentation before asking, also see Brad's remarks below.
Edited by: Thomas Zloch on Dec 20, 2010 9:51 PMThese are standard processes which are covered in the help files and have been discussed many times here. This is NOT a training forum for newbies where experts just give you the solution for your requirement. Once you have proven that you've actually made an effort to solve the issue yourself and have a SPECIFIC technical question, you'll get some help...
-
I cannot convert a PDF to a PPT. I have a paid up subscription but the system just takes me round in cirlces....
Please don't post the same question multiple times!
-
Smart Form convert to Pdf and send to email
hi,
ive dev the smart for me21n. its working fine. Standard programme is SAPLMEGUI.
now new requirement is , convert the smart form to pdf and then sending the pdf through email to customer.
Can any plz tell me is there any stadard programme or else need to custmise the print programme?
RegardsKirans belong to convert the smart form to pdf.
there is standard programme RSTXPDFT4
but after convert the form to pdf. i need to send it thorough mail.
iam checking other link one which is send by mr.naresh..
thank you
Regards -
Sap script convert to pdf and then send to email
Hi,
good day sap guys
ive dev the sap scipt for customer statemnet one which is used the t.code is f.27.
i need to convert the sap script to pdf and then send to email.
plz let me know..
how to do it.
regards
chanduHi,
I script program use the following (go to the "call function 'CLOSE_FORM'")
data: binfilesize type i.
data: pdftab type table of tline with header line.
data: i_itcpp like itcpp.
data: g_t_otfdata type standard table of itcoo with header line.
call function 'CLOSE_FORM'
IMPORTING
RESULT = i_itcpp
tables
otfdata = g_t_otfdata[]
exceptions
others = 1.
if sy-subrc ne 0.
retcode = sy-subrc.
perform protocol_update.
endif.
call function 'CONVERT_OTF'
exporting
format = 'PDF'
importing
bin_filesize = binfilesize
BIN_FILE =
tables
otf = g_t_otfdata[]
lines = pdftab[].
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
concatenate file_path '.pdf' into filename.
call function 'GUI_DOWNLOAD'
exporting
bin_filesize = binfilesize
filename = filename
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = pdftab[]
FIELDNAMES =
exceptions
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Maybe you are looking for
-
Time Machine on Snow Leopard just doesn't work.
So I've had huge nightmares over the past few days over Time Machine. So I've always been a big proponent of Time Machine. I always tell everyone that you NEED a backup solution, and while Time Machine may not be the be all and end all, it's a great
-
Can't sync iTunes music to an iPad?
I am a student with a school issued iPad. When I got my iPad a year ago, I backed it up to the my apple ID. I didn't sync anything to it. So, now, nearing my next year in school, I wanted to sync my old content to my iPad. I successfully backed up al
-
Overclocking the i7 920 on Eclipse to 3.2 ghz
I am trying to overclock my i7 920 to 3.2 ghz to match my 1600 DDR3 rams, I tried alot of settings but got nowhere. If anyone has successfully clocked such a simple setting could they post their BIOs settings please? Also is it advicable to clock to
-
File sharing with 10.2.8 and 10.5.4
im running 10.2.8 on my iBook G3 Clamshell, and i want to share files with my MacBook running 10.5.4. I can access my iBook through my MacBook, but i can't figure out how to access my MacBook through my iBook. How do i do this?
-
How can I get rid of vsearch ad injection malware?
I believe I have vsearch ad injection malware. How can I get rid of this? I am constantly getting pop up ads mostly for Mac Keeper.