Converting Unix Executable Files for use in DVD Studio Pro

I have several projects that were created in iDVD 2 back in 2002. In Finder, the file kind is listed as Unix Executable Files. If I add the extension .dvdproj using Get Info and try to open them in DVD Studio Pro, I get the error Wrong File Format and it will not open the project.
The machine I am currently using does not have iDVD on it.
Does anyone have a recommendation on a way to make these files usable for DVD Studio Pro? I understand if it is not possible.

You can import iDVD project into DVD Studio Pro, however I think it won't work with projects from iDVD 5. I'm not sure about iDVD 2. Also these files have no extension and are listed as Unix Executable Files.

Similar Messages

DVD Compressor setting for use in DVD Studio Pro

I'm trying to create a playable dvd that has using dvd studio pro. However I want to compress the .mov file using compressor first. I've tried several setting, ut I get the same blurry text and graphic results.
What's the best setting for a hi quality dvd, the same quality has professional dvds.
Thanks in advance for any help.

The best one you'll get with Compressor is DVD Best Quality 90 mins. Tweak it any higher than that and you run the risk of drives refusing to play the disc.
You can't make it look like a professional DVD because the pros don't use DVD Studio Pro. They use significantly more expensive software and encoding hardware, and the discs are replicated, not burned.

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

Can I avoid re-encoding of .mov files with Compressor and DVD Studio Pro?

Hello,
I've had some projects banned at one of the tracking sites because my iMovie 6.0.1/iDVD 7.1.1 workflow involves re-encoding of the iMovie .mov file to MPEG 2 when authored in iDVD. I did some research, and was advised that I could get around the re-encoding by using Compressor and DVD Studio Pro instead of iDVD. But, when I import the iMovie file to Compressor for authoring in DVD Studio Pro, the result is another MPEG 2 file. So, am I missing something, or is there no way for me to avoid re-encoding with Apple video production tools.
Thanks for any assistance.

The simple fact that you have to encode your files into an mpeg-2 stream means that you're going to experience a loss in quality. Check the bitrate of your DV files. The max bitrate for all of the elementary steams (audio, video) on a DVD is 9.8mbps. So if your source has a higher bitrate than that... you're going to experience "lossiness."
However there are some tricks that I've read about that increase the overall quality of compression... and yes they are for windows. Check out AVIsynth and MeGUI... there is a learning curve to learning these tools though. I never followed through with it.
EDIT: Also forgot to mention that learning these things takes TIME. Quality encoding takes much longer than realtime.
You can also check out some higher quality mpeg2 encoders like cinemacraft and HC encoder, although the former costs $$$. The quality you get from these encoders are much better than what you have in iDVD and DVDSP/Compressor.

How to fix " insufficient disk space for encoding" on DVD STUDIO PRO 4

I keep getting the error message, "insuffiecient disl space for encoding" on DVD STUDIO PRO 4. I reinstallled the program, uptaded software and also cheked the library receipts file. After the reinstall I am still getting the same message. Can anyone tell me how to fix this?
Thanks

Thank you for you help, however I think you misunderstood my question
I have 800 gb on my Mac hd
I am getting this error message when I go to build and format the dvd. This is after compression encoding.

Export settings for quicktime movie to use in DVD Studio Pro

The workflow:
I created a movie and did extensive sound adjustments in iMovie and a few video edits, and exported it to a quicktime format:
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
Since then I upgraded to FCS, and tried to create a DVD with DVD SP and import the movie, and I get this error:
Import error:
One or more files failed to import. Common reasons for this are that they do not match the current project's video standard or their file format is not supported.
I'm fairly sure I have matching video standard...and the file format has always been supported before.
I imported the quicktime (.mov) file to FCP and added some edits, recreated the chapter markers, and early on there was a pop-up that said my movie format did not match the project settings, so I checked the "okay" to adjust the video file to match.
When I finished, I exported the file from FCP to a quicktime movie with the "current settings" that have always worked with DVD Studio Pro before, and I'm getting the same error.
I don't know where the problem is. Both the original movie I created in iMovie and the movie I recreated in FCS will import to iDVD. I wanted the better quality production from DVDSP....
I no longer have the iMovie project file. (I thot I was done.) I do have the original footage, but I'm already three days in and hoping to avoid starting over.
I would sure appreciate any help!
Thanks!

2cute2b2smart wrote:
I don't know where the problem is.
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
The specifications you listed are the problem.
I can't comment on iMovie -don't use it personally.
From FCP, you would export a self contained movie using the current Timeline settings (not H.264 ever)
Bring that file into Compressor and apply one of the time based DVD presets that the running time of your movie fits into. This will produce a MPEG 2 video file and an AC3 audio file. Bring both into DVDSP and author.
A DVD video is always standard def 720x480 (NTSC) or 720x576 (PAL).
Converting the output from FCP to H.264 is adding an unneeded compression stage that will compromize quality -because DVD assets are always MPEG 2 / AC3. Even if DVDSP accepts that H.264 file, it gets transcoded again using DVDSP's own compression system.
All of this is covered in the DVDSP user manual. Take the time to read it. DVD authoring is complicated if you just jump in and start poking around, simple if you take the time to understand the basics.

HT204382 how to convert movies from flip for use in final cut pro

How do you convert movies from a Flip video camera for use in final cut pro?

DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
in recommended order, choose one of the following tools/workarounds:
DVDxDV (free trial, 25$, Pro: 90$)
Apple mpeg2 plugin (19$) + Streamclip (free)
VisualHub (23.32$)
Drop2DV (free)
Cinematize >60$
Mpeg2Works >25$ + Apple plug-in
Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
http://karsten.schluter.googlepages.com/convertdvdstodvs
(advice is for imports to iM... )
none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
+be nice to copy rights ...+

Motion file poor quality in DVD Studio Pro

I'm using a Motion file for my DVD menu. I have double checked to ensure that all of the dimensions are correct, however the quality of the motion file is incredibly poor in DVD studio pro. Is there something that I am missing?

Don't trust the viewer in DVDSP. It's by no means accurate. Plus, since you're adding a Motion project to the DVDSP project, the Motion file needs to be converted to MPEG2 so that it'll play on a DVD. You could be either seeing a preview of a file that's not been converted yet, or else the encoding settings in DVDSP could be set too low.
My recommendation would be to burn a quick DVD and view in on a TV for quality.
Andy

Best program to create slideshow for inserting into DVD Studio Pro project?

I will be creating my final DVD in DVD Studio Pro soon and want to add an appealing slideshow as well. Before wasting my time, yet again, can somebody suggest the best program to use in order to bring it into DVD Studio Pro please?
Thank you.
Mitaka27

Be aware that a there is a difference between a video that consists of a slideshow, and what DVDs consider a slideshow.
If you want a DVD slideshow, then I suggest taking a look at one of the Lord of the Rings Extended Release DVDs. On the two extra discs with each movie there are plenty of DVD slideshows. With a DVD slideshow you can go forward or back through the slideshow. You can stay on any slide as long as you like. A slide can contain audio. Audio cannot carry over from one slide to another. There is no transitions from one slide to another.
What I suspect is that you want a video that acts like a slideshow. In that case, do not use the slideshows in DVD SP at all. Create your video outside of DVD SP, then just place it in a Track and treat it as any other video.
That being said, do you want a lot of control over how the video slideshow is created, or do you want a program that will do most of the work for you at the expense of not having absolute control over how things are put together? If you want full control then create your video slideshow in FCP/Motion. If you want a program that will do a lot of the work for you, then you should look into iPhoto. It can create some pretty spectacular slideshows very easily, but you will not have the full control you have with FCP.

Compressor 4.1: exporting files to import into DVD Studio Pro

Hey folks,
Having issues trying to figure out how to generate both the .m2v and the .ac3 files to import into my "legacy" application of DVD Studio Pro. I have separate projects all done...clients waiting... and ready to export from FCPX.
It seems that the only function that this new Compressor can do, is to build the files and then automatically build and burn a DVD. I need to create my own menus and chapters. I USED to be able to do this in my older version of Compressor easily.
Am I stuck? I did not know that this version would act in this manner in the "upgrade". If I could...I'd rather have my older version back!

Select the job. In the Inspector choose When Finished, Do Nothing.
You will get the two elementary files saved to whatever location you specify. You can import those files into DVDSP.
Russ

Problems converting h.264 files for use in Premiere

Hello,
Given the fact that I've searched for an solution to this and everything I read is two steps ahead of me, I'm sure there is some basic no brainer thing that I'm overlooking and I apologize for being a noob. I'm attempting to edit HD files for the first time and the files come out of the camera in h.264. I first tried converting with mpeg streamclip but most of the codecs were apple. I tried a few codecs but none of them worked properly with premiere (video in source monitor was jerky, or it'd play fast and freeze on the last frame for the duration of the clip instead of playing the entire clip at proper speed, etc.).
I went through a few other programs and I've still had no success. Every conversion I attempt has some issue in Premiere. My new computer should have no issues running HD clips. It's an i7 quad core with 8 gb RAM.
I know I need to convert the h.264 files to edit in premiere, but I just need to know what program I can use to convert it and what codec will work in Premiere.

I'm going to guess that you're on a PC. Most folks editing Canon HDSLR on PC's seem to be transcoding to Cineform codec to get realtime editing. They have plenty of flavors at prices from $199-$1499 for the Prospect4K that is specifically built for Premiere. You can download 30-day fully functioning trial from www.cineform.com. You'll also find lots of helpful stuff over at www.cinema5d.com
CS5 promises native, realtime editing of multiple layers of h.264 files so I'll actually be putting my dough toward a new system rather than the cinefom plugin.

Converting an HTML file for use in browsers

Hi Guys and gals,
I am new to creating java programs to run within a Web environment - thus my reason for asking this question. I hope this is the apropriate forum to point this question to.
I have created an applet which is invoked inside an HTML file. The HTML is fairly simple, although it does pass a number of parameters for use within the applet.
I have run the HTML file within Sun's Appletviewer and it works fine. Now I need to convert the HTML for use in Browsers supporting Java 2.
What is the best resource to use to perform this conversion ? I understand some type of Converter or Plug in is available to perform this task. Can anyone help me out ?

The easiest way is to use SUNs HTML convertre program.
You can find the information about the JAVA plugin and how to create the HTML code at
http://java.sun.com/products/plugin/1.3/docs/html_converter.html
and
http://java.sun.com/products/plugin/1.3/docs/tags.html
Oliver

Using Compressor DVD Studio Pro 4...will not burn files

I was working with an extreamly large video file that was exported as a Quicktime movie and was 69.2 GB and about 2 1/2 hours long. I imported it into the Compressor and chose the DVD file folder>Best Quality DVD 150 minutes and dragged both the video and audio sources onto the project then hit submit. Once it was finished, I had 2 files video and audio...video (MPEG-2 3.99 GB ) audio (Professional 2.0 aC3) I then imported it into DVDSP 4 I went through dragging both files into track 1, setting chapter markers but I also in the dis/volume tab selected the dual layer option since this movie is very long...I also have the DVD+R double layer DVD for buring on to. Once I click burn, it goes through the muxing and then formatting process which are both successful but then it pops the DVD out. I also noticed during the process that in the Log, it notes that the video and audio files are not DVD-video files and will not be applied to the final DVD...I am assuming that it is not recognizing these files, is there a way to fix this perhaps in Compressor first?
Thanks

Hello, see if Burn.app works...
http://burn-osx.sourceforge.net/Pages/English/home.html
Converting.
Forget worrying about conversion. Burn will take your video and audio files and turns them in the right format.
In the preferences you can set the options for quality and size.

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

How can I export or convert to AVI file for use on PC?

I know I did this back in Jan 2009 but can't remember the process to get an AVI file that retains the sound. I thought I exported a SWF and then somehow converted it to an AVI.
*The file:*
*Retains sound, builds and movement.*
*Automatically advances, using "control p" to pause (did not retain the click-to-advance feature).*
I've been reviewing third party software but they seem to all state that the won't retain the sound/builds etc.
Any ideas?
Thanks!

The simplest way is to export as QT and then open the QT using Quick Time Player. If you've got pro you can export as .avi.
There are videos on youtube showing you how to upgrade to QT Pro for free...

Converting Unix Executable Files for use in DVD Studio Pro

Similar Messages

Maybe you are looking for