Converting .VI file from Labview 6.1 to Labview 7.0

I have .VI file that was working fine under Labview 6.1. However, after Labview 7.0 is installed, some of the subvis are not working. When I clicked into my .VI, it says it is searching for AI Read One Scan.vi. I also have AO in the .VI. So far, I could not find the new name or function of these two? Is there any way, I can have smooth transition from version 6.1 to 7.0? I do not want to find each question mark in the older version .vi to convert the new version of module. Any help, appreciated.

It sounds like you didn't install DAQ support. There is a second CD called Device Driver Reference. Install NI-DAQ from there and see if that fixes your problem.

Similar Messages

  • Can I open a excel file from labview

    I have a program who write temperature in a excel file and i want to open this file from labview .

    This depends slightly on the amount of data you have stored within Excel.
    You can use the "Labview Functions>>FileIO>>Read from Spreadsheet file.vi" which effectively reads all lines from a text file and converts it into a numeric array.
    Alternatively, if your data structure in Excel is more complex than this, you can use ActiveX calls to Excel to retrieve it.
    Use an "ActiveX>>Automation Refnum" control and select the Excel server class. This will then enable you to access properties and methods of Excel to retrieve data from specific cells and pages.
    The attached example should help.
    Dan
    Attachments:
    Excel_Automation.vi ‏60 KB

  • Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011

    Hello,
    can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
    Thank you very much for your support.
    Solved!
    Go to Solution.
    Attachments:
    TCPIP_Nagle_algorithm.zip ‏63 KB

    Additionally I am sorry that I have put my post in LabVIEW and not under Version Conversion

  • How can I read pdf files from LabVIEW with different versions of Acrobat reader?

    How can I read pdf files from LabVIEW with different versions of Acrobat reader?
    I have made a LabVIEW program where I have possibility to read a PDF document.  When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
    It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
    The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
    Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
    This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
    Jan Inge Gustavsen
    Attachments:
    Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
    Read PDF file.jpg ‏201 KB
    Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

    hi there
    try the vi
    ..vi.lib\platform\browser.llb\Open Acrobat Document.vi
    it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
    The answer depends on the type of video files you want to convert.  If they are DRM protected commercial videos, no help can be given here.  Google.

  • When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How can I solve this problem?

    When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How do I solve this problem?  I don't know how to change it from Read Only.

    Dear Sara
    Thank you very much for sending the converted file.  Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
    Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful).  I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK".  However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before.  I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images.  Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian."  Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
    Regards,
    Judith.

  • How to convert a file from pdf to txt in java

    hi,
    in my project ,I want to convert a file from pdf to txt using java api. If anyone
    have any idea about it plz help me.

    Google has several ideas. :)

  • Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

    Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

    yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

  • Want to convert a file from Windows XL to PDF

    Want to convert a file from Windows XL to a PDF can this be don?

    Search!
    http://lmgtfy.com/?q=convert+xl+file+to+pdf

  • I paid to convert a file from pdf to Word doc. and it is unintelligible. Why ?

    I paid to convert a file from pdf to Word and it is unintelligible. Why ?

    Hi M & B P,
    Please give the following a try:
    If you're converting via the ExportPDF website, log out, clear the cache, and then log back in.
    If you're converting from within Reader, choose Help > Check for Updates to make sure that you have the most current version.
    Please let us know how it goes. If you're still having problems, please let us know how you're converting, what browser you're using, and whether you're on Mac OS and Windows. We'll do some deeper digging if need be.
    Best,
    Sara

  • How to convert WMA files (from Windows Media Player) to play in iTunes

    How do I convert WMA files (from Windows Media Player) to now play in iTunes?

    Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
    tt2

  • How to convert raw files from new fujifilm x-t1 ?

    how to convert raw files from new fujifilm x-t1 ?

    The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
    Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

  • DNG converter not converting RAW files from Canon 70D.

    DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

    hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
    in any case, cr 8.2 or better is able to convert your camera's raw files.  why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

  • Can you generate PDF file from LabVIEW?

    Can you generate a PDF file from LabVIEW?

    Hi there,
    I just read this post in passing.
    Heres a fairly detailed forum post on the matter - seems to be a few work arounds, but basically no you can't with just the normal labview.
    http://forums.ni.com/ni/board/message?board.id=170&message.id=259103&query.id=65866#M259103
    Thanks
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

    I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

    What version of P-Elements, and what codec does the camera produce?

Maybe you are looking for

  • Atualização da versão 17 da Nota Fiscal Eletronica

    Olá a todos. Baseado na nota Note 1538854 - SAPK-10017INSLLNFE: Support Package 17 for SLL-NFE, precisamos aqui na empresa atualizar a Nota Fiscal Eletrônica para a versão 17. Na parte ABAP e XI Content tudo certo e importado com sucesso. Tenho dúvid

  • How to swap between cameras in j2me?

    some mobile phone comes with multiple camera. such an example is Nokia N70. i want to use the front camera of a cell phone in my j2me application. if anyone know how to do it, please give me some idea.

  • "Reboot screen" after time machine migration

    After a blue screen one morning I decided to check HDD through Snow Leopard CDs. HDD and Permissions were fine. But still no boot. After reinstalling OSX and full Updates I transferred Time Machine Back-up. On reboot a dark grey screen appears and as

  • How do I display an image in an APPLICATION

    I have the following code and I want to display an image. I figured that the easiest way to display an image was via a JLabel. import javax.swing.*; import java.awt.*; public class NewMain {     public static void main(String[] args) {         JFrame

  • Null Pointer Exception in SessionData removeAttribute

    Hi, I am getting a null pointer exception while calling removeAttribute on the HttpSession. This happens pretty consistently (it does not give a null pointer some times). All we are doing is removing a Struts Action Form from the session as it is a l