Converting videos PLEASE HELP REALLY FRUSTRATED

i decrypted wedding crashers and I tried to convert it and as soon as i did it shot up to 98% in two seconds. and now it is just staying there.

the same thing happpened to me what the problem is is that it was put in a muxed format and there are two different components the video component and the sound one. i tried to convert my movie but apple hasn;t created one to switch the muxed sound component, i have yet to find one that does.

Similar Messages

  • Can't convert videos, please help!

    Ok, I did'nt get any answers the last time i posted this message, so I'll try again. It would be thankful if anyone answered me.
    I have the latest Itunes and an Ipod 30Gb MKII. On my computer I have some music videos and some movies too in the formats .Avi, .Mov and perhaps more. The problem is that when I try to add them into my library in Itunes some won't just add?! And the little bunch of videos that after all do make it into the library won't fit into my Ipod even though I convert them into the proper format with my Itunes. The converted ones says "wrong format" or something. When I choose the setting to manually load my Ipod with videos, the converted videos work on my Ipod, but there's no sound. Why? Please help!

    Some MPEG files don't seem to take the audio when you do an export from Quicktime player I've noticed, so i have to extract the audio and video seperately and re-mux them using a program call mpeg works, (all on a mac i'm afraid though).
    the best way to make sure you get them iPod ready is to use quicktime to export the files using the iPod export setting. I think you need quicktime pro activated ($19 well spent for loads of video stuff). also you might need whatever the PC version of 'flip for mac' which allows avi and other non quicktime content to be played and edited/exported.....
    doubt that helps too much though hey!
    good luck.
    to be fair, video on the ipod is pretty pants anyway i wouldn't bust a gut getting it on there...

  • Publishing video to f4v format for web pages. My recorded narration doesnt playback when it is done recording? Please desperate for help. really frustrated atm

    I am creating a youtube video. I add the media to the file. Record the narration I'd like. Go to publish and share, went down to computer, chose the first one that says adobe flash player f4v file. When its done converting i play the converted file and it doesnt play the recorded audio. Please help really frustrated

    Does it work if you export to a different format?

  • HT4972 the apps weve downloaded are not working.  please help,  extremely frustrated with our ipod 4

    the apps we have downloaded are not working,  please help,  extremely frustrated with our ipod 4

    See my previous reply for for the apps closing.
    For the wifi problem:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect OK before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Help with video please help  can't sync video

    Hi can someone please help me. I have video that my mom took from my 6 months old brother now i want to sync it into my Ipod touch ios4 but it gives me this error i took a picture that you guys can see it too----->> http://i50.tinypic.com/rw6git.jpg please help to solve problem

    As part of the 12 days of iTunes promotion on Christmas I downloaded 1 music video, How can I delete it from my iPhone and my iPad. I can't delete by slide on the music video name and when I sync with **iTunes**, I can't find the music video, please help.

  • IMovie 09 not accepting old videos - PLEASE HELP!

    I also had the issue with iMovie 08. Old videos that I had on an older external hard drive, shot by a Samsung SCX105L MPEG4 camcorder (remember, the little blue one with rubberized sides) as well as with a Motorola Razr, are not being recognized by iMovie. I've tried HandBrake and, though it converts, still won't move to the editor in iMovie. Any new videos that I import from my Canon PowerShot work just fine. PLEASE, I really need help bringing these older files (MPEG4, AVI, etc.) into iMovie so that I can edit them and make my home movies of the kids.
    Thanks to all in advance for any help you can give.
    Eric ([email protected])

    Almost a year of frustration and feeling defeated has finally come to an end. *Thank you so very much Sheryl and Jigbobby for your guidance*. To all else needing to convert files so that iMovie 09 will accept them to be edited, here you go:
    -I used MPEG Streamclip to convert MPEG4 files. I saved them directly onto the desktop after first converting to QuickTime Movie (see Sheryl's notes at top).
    -I used HandBrake to convert AVI files to mp4 files (saving the converted file onto the desktop). I then opened my new favorite, Streamclip, and imported the now converted mp4 file (also saving it to the desktop).
    -Once one of those lines was complete, I was able to Import a Movie file (see Jigbobby's note above). It only took a couple of minutes, but the file wound up in the iMovie edit box to be edited.
    I can't believe how relieved I am! Thanks again for your help! If anyone wants a rundown in more detail of what I did to help you out, feel free to email me ([email protected]). ~Eric

  • Problem with recording video, please HELP!!!

    I am trying to record incoming video with audio saving into a quicktime file. After recording the session the Audio is always fine BUT the Video displays some part inthe beginning then turns all white the rest of the way at random times. I.E. the session is 4mins long the audio is 4 mins and video goes 2 mins then turns white the rest of the way. Below is what I do to record a video with audio (- try/catches). Please help me out... i am really lost. thanks!
    DataSource[] tempSources = new DataSource[2];
    tempSources[0]=audioSource;
    tempSources[1]=videoSource;
    DataSource mergedSource = null;
    mergedSource = Manager.createMergingDataSource(tempSources);
    mergedSource.connect();
    mergedSource.start();
    processor = Manager.createProcessor(mergedSource);
    processor.configure();
    processor.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.QUICKTIME));
    processor.realize();
    DataSource outSource = processor.getDataOutput();
    dest = new MediaLocator(savePath);
    filewriter = Manager.createDataSink(outSource, dest);
    filewriter.open();
    filewriter.start();
    processor.start();

    Hi HyperHappy
    Thanks for the fla file, I just tested it out on the IDE
    (flash8) and everything works like a charm.. I can scrub around
    either by clicking or dragging, the volume only responds to clicks
    I assume that's also correct or not?
    Tiago

  • PLEASE HELP : REALLY ANNOYED

    Hi i bought the WRT54G version 8 at xmas time. And ever since ive been struggleing with this DANM router. I have two home PC's both of which are hardwired (landlined) into the back of the router. I also play PS3 and Xbox 360 wirelessly. Now my problem here is that ive called for help like 3x now and they have given me advice and it seemed to have worked... but then it doesnt. My ps3 wireless connection is running terrible... im in the 1red(LAGGING) when im usually at full green. My internet connection is Aliant / DSL and i know it is the routers problem because my internet provider has already clarified to me that everything is running fine and i should not be having problems. I have upgraded the firmware version to the latest one... I have changed the MTU setting to manual at size 1429. I have gone into wireless / advanced setting and changed my beacon interval from 100 to 50. All of these changes were recommended by the Technician at Linksys.
    Now the internet seems to be working better / a little faster but my PS3 wireless did not change one bit. Also i play a game on my PC called Starcraft. Ive never ever had problems with my connectivity to this game and ive played this game on and off for 10 years. These problems are really really annoying me and i dont know what to do. Im really frustrated and wish someone could help me because the technicians at linksys havent done **bleep** for me (excuse my language im just frustrated).
    PLEASE SOMEONE HELP ME!!!!!

    the rtr have a NAT..it protects everything in the network but unfortunately sometimes it blocks some packets to make the ps3  work freely...i haven't read that you have done any port opening...pls verify!
    now another problem is that a DSL connection uses NAT capable modem...its multiple NAT on your network...Its a big problem..
    suggestion..
    open the ports for the rtr...the port numbers you may ask from microsoft..click the link for the steps
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5402&p_created=11714...
    do step 3 and 4 to open the ports that you will get from ps3...
    CamZ

  • Dad needs help saving his little girls HD Videos - Please Help!

    I am new to Mac. I have always been a PC guy. I am pretty good with computers/ learning Imac. I shoot video and pictures all the time and I have been waiting forever for the ability to edit and author in Blue Ray, I embraced Blue Ray and HD early on before the Blue Ray/HD Dvd war had been won. THe only software out there that was ready for what I wanted to do was more like Pro software $1000 + and nothing great Consumer level. I was using Roxio DVDit HD. Doesn't work with APple. I have been shooting HD video on my Sony HDR-HC3 for 3 years. It captures on Mini DV HD tapes(1 hour HD Content). I have about 35 tapes filled that I want to start editing. I have been holding off for the past 2 years due to the emergence of Blue Ray. I do have a Blue Ray Burner on my Sony Vaio but it is s l o w . These are videos of my little girls and I want the footage in the best quality possible. I am learning my way around Final Cut Express but it has been slow. I figured since I have no Blue Ray Drive on the Imac whats the rush. 35 Tapes later and I am starting to have an anxiety attack! Plus I am ready to start watching/editing what I have taped so far. Here is what I want to do. I want to import my tapes to Final Cut Express. Then save the whole tape unedited in digital format so that I may go and access it at any time as I decide how I want to compile the films down the road. Perhaps I will do a Christmas Movie or Birthdays. I don't know how many I will do but I don't want to have to import from 6 or more tapes each time I start a new project. I want to then never use the tape again and save it for back up. The more I research the more confused I get. I want to ultimately burn Blue Ray discs but that is not an issue yet. For now just getting a high quality digital /editable back-up would be great. I started exporting to the Hard Drive and about 4, 1 hour movies, took up my entire computer!! About 361 Gig!!! how is that even possible. Will I really need 20 1 Terabyte hard drives to do this? I used to just use Window Movie Maker to output avi files but that was before the HD Camera. I also don't want to save as 720 resolution to save space. I want a great quality master copy. Ultimately this will be played on Blue Ray on 55" LED Samsung with razor sharp picture. Please help me.

    Hi(Bonjour)!
    Welcome to the forum.
    HDV cannot be captured natively in FCE. It is transcoded to Apple Intermediate Codec. 1 hour of HDV 1080i60 transcoded to AIC take around 49 gig/hour. period.
    Native HDV take around same hard drive space than DV. BUT you need Final Cut Pro (bundled with Final Cut Studio) to capture it as HDV.
    I'm pretty sure that your can edit one tape and just keep the "crème de la crème" ( http://en.wiktionary.org/wiki/cr%C3%A8mede_lacr%C3%A8me )of your precious footage.
    Save the final edit as a self contained movie and store it on external hard drive for future use. This process is very long but it can solve your problem. Capture one tape per week if you can.
    There are other option to distribute HD content than Blu-ray. You can search this forum with +Apple TV, HD monitoring from mac+, keywords. Also see:
    http://discussions.apple.com/thread.jspa?threadID=2219493&tstart=0
    Michel Boissonneault

  • COMMON CONVERTING PROBLEM "PLEASE HELP"!!

    Hello fellow Ipod owners, I just purchased a 30 gig I pod video today. I currently have approximately 1100 songs. Itunes is only converting 460 songs. I have the same problem Tabs has. I have noticed that any songs I downloaded from other sites are not converting to itunes. Can someone please please help. email me, my email address is [email protected] Thanks :~)

    The "Do Not Disconnect" screen will continue to stay displayed on your iPod, simply because you either have Disk Use enabled, or you are manually managing your iPod's songs.
    If you are automatically syncing songs to your iPod, then disable disk use.
    For more info, see this:
    Enabling Disk Use for iPod
    If you are manually managing your iPod's songs, then you will have to eject it from your computer before unplugging it to make it safe to disconnect.
    For details on safely disconnecting an iPod, see this:
    Safely Disconnect iPod
    -Kylene

  • Video please help

    ok i just got a new ipod with video..i have wma formated videos on my computer and have NO IDEA how to convert or put them on my ipod..can someone please help me?!?

    Try this...
    http://www.filetrial.com/convert/wmvtomov.html
    Then drag that converted version into iTunes. Right click the video in iTunes and go to convert selection for iPod.
    You can also search the internet using something like Google and see what else is available for "convert wmv to mov"
    btabz

  • When i search for a website it takes me to another website.  I will click on the link and it takes me to one ive never wanted?  please help very frustrating!  I am not very computer savy, is it my settings or something?  Jen

    When I search for a website it itakes me to another website.  I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy!  Thanks!  Jen

    Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

  • Please help really urgent

    I have a small JFrame on top of another JFrame which covers the
    entire comp screen. In the smaller JFrame I have a JMenuBar;
    once u click on the JMenu I would like for the menu to open and
    diplay itself completely without having to resize the frame.
    Something which im unable to do now the menu ends at the boundaries of the JFrame and the user would have to resize the screen. Can someone help please im really stuck

    A wild guess: Are you mixing Swing and AWT? I experienced exactly what you describe when I had a JFrame containing AWT components.

  • Itunes doesnt recognize Ipod, please help, getting frustrated!!

    OK today I plugged my ipod into my computer to update it and magically it started updating, i dont know what I did but it updated the stuff that i have added recently. Yesterday it wouldnt update and it hasnt updated for the past 2 weeks. Now after adding a couple of more songs i go to update it again and nothing happens, now what is going on, I have uninstalled and reinstalled both the ipod updater and the itunes updater, the latest software is on my ipod, i reset my ipod because it froze last night, i dont know what to do, I am close to taking it to the apple store but im not sure what they could do about it. Is there something in itunes that I need to click so my ipod will be recognized, this is getting very frustrating, my ipod use to update every single time that I plugged it in, my computer is fairly new but my ipod has worked several times on this computer before, so please anyone HELP ME!!

    i am having the same problem and i am going insane. It i had my ipod since christmas and never had a problem till this week. When i plug it in the ipod displays the "Do not Disconnect" but itunes doesnt pop up or show that the ipod is plugged in. When i try to update it the updater also says that the ipod isnt plugged in. I know have lost all the songs in my ipod but they are still in my itunes but it wont update. Somebody please help, its been about 4 days and im going crazy.

  • Please Help, Very Frustrated - iPhoto 11  & Canon Raw(.cr2) files

    I recently started shooting raw(.cr2) with Canon 6D (on the list), while on vacation of course.... while there I loaded all my images to my Ipad to save room, due to only having my 16gb memory card with me, yesterday I decided to take them off the ipad and store them in iPhoto where all my work is stored and back it up to my external harddrive,  I have tried for 4 hoursto figure out why it won't upload to iPhoto 11, nothing works, it acts as if its uploading and then after 30 mins it says unrecognizable format(see screen capture below).
    I have read several other different forums and similar questions all the way back to 2005 and nothing seems to help, I tried making a smart album, updating the software, but iPhoto will not recognize the pics.  I did find one forum that said use Image Capture and do it that way, It worked to move them off the ipad but only to my extrenal hard drive with no image preview, saying it cannot open the file, all I eally want to do is have them load like all my other images into iPhoto which I use almost everyday and not have to go back to shooting jpeg along...PLEASE HELP any suggestions??

    Thanks everyone...I tried and even downloaded the specific software released from Canon specific for Mac for my camera a Canon 6D... Nothing worked... IPhoto never would recognize the images.... 
    BUT .....  in case someone else has this problem... I had to jump through hoops to figure it out... but finally with the help of several forums on here... I figured out a way to save my images and have them in a jpeg format to save for my memory folder for my daughter....so I did figure out a way to make it work...
    If you transfer for images from camera(in raw format .cr2) to your ipad...... and cannot load them to iphoto like me....here is how to do it....
    1. I searched my Mac, it comes with a software installed called "Image Capture" find it and load your pictures on
              your ipad to a folder on your desktop for easy finding.
    2. Search Google and Download Program Called Rawker....
    3.  Open Rawker... go to File
                                  a.  Select Batch - Select source Location - Select your file you saved your images in
                                  b.  Select File Batch - Select Source Destination - either make a file on your desktop or
                                            select where you want your newly converted RAW/jpeg images to be placed
                                  c. Select File batch and Start Batch...
    4. After its done with the convert -  you can import that new .jpeg folder of images to your iphoto
    Bunch of crazy circles because I was told it was better to shoot in Raw .cr2 ... NOT ... It might be if you have the right program but I guess none of the ones I tried worked....
    Until I find a better way I will just go back to shooting in jpeg fine.
    Thanks again Everyone

Maybe you are looking for