ConvertTo-SecureString : The system cannot find the file specified.

I have a Tidal job that executes a PowerShell script. The encrypted password is stored in a password file on the application server. In the PowerShell script, there is the line below that gets the contents of the password file.
$encryptPW = Get-Content "C:\Program Files\MyCompany\MyApp\encryptPW.txt" | ConvertTo-SecureString
On my development enviroment, Tidal was referencing the Agent/Adapter (app server name) and the Runtime User (domain\userID) fine. The script was executing well until recently when the Tidal server was rebooted. After the reboot, the PowerShell script execution is erroring out with the message "ConvertTo-SecureString : The system cannot find the file specified." It appears that when the PowerShell script is executed from Tidal, it is unable to find the password file using the Runtime User specified in the Tidal job.
The Runtime User has the proper access on the application server because we must sign-on as that user in order to generate the password file to hold the encrypted password for the Runtime User.
It is as if Tidal is not passing the right credentials when it is executing the PowerShell script. Has anyone come across this issue?

If you rebooted then it may be possible that your remoting setup was reset, was session based, or winrm service was set to manual, etc.
Try these on the server that was rebooted
get-service winrm
Status Name DisplayName
Running winrm Windows Remote Management (WS-Manag... get-service winrm
Check execution policy settings:
get-executonpolicy if this is restricted... you'll have problems
you can try enable-psremoting you should get:
WinRM is already set up to receive requests on this computer.
WinRM is already set up for remote management on this computer.
We use a similar setup however we use a certificate (installed on agent) and password file w/ thumbprint (on central drive) to run with alternative credentials

Similar Messages

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: :      ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------

from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred

Error message when starting: McShield.dll: the system cannot find the file specified - what do I do to solve this?

When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red Baron

Hello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George

RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-)

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

"The system cannot find the file specified" - error reading properties file

I have packaged a class file and a .properties file in the same folder as a ejb-jar file and in the class file i try reading the properties file and it throws me the error - "The system cannot find the file specified". But when I put the complete path, it has no problem finding the file.
I know that this must be the problem with classpath, but can anybody tell me why it is not finding the properties file even if they are in the same folder. How do I make class files find .properties file which are in a folder.
Any help will be greatly appreciated.

Hi,
I am not sure if your question is realted to the Oracle Application Server - anyway, if you are packaging a class file and a properties file in a JAR File, you need to read the contents in a different manner...something like this... :
URL url = new URL("jar:file:/home/duke/duke.jar!/");
JarURLConnection jarConnection = (JarURLConnection)url.openConnection();
You might want to have a look at this link for more information :
http://java.sun.com/docs/books/tutorial/index.html
You may also get better responses if you post your question in one of the Java Forums.
Regards,
Sandeep

The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

I m getting this error on page load of visual webpart added to the sharepoint site.What could be the issue??I m getting this error like in dev and not in test environment..What could be the issue??
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

could you please share complete stack trace of the error, there could be differnt reason for this error?
share the stack trace and also check the ULS logs.
did you try to redeploy the webpart( completely removing and re adding)?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

The system cannot find the file specified!!

hi
i am new to java web start. i am trying to run a program which copies the contents of a text file farrago.txt to a new file in some other directory.
i have packed farrago.txt in the jar file with the program but
when i run the program through webstart i am getting error:
the system cannot find the file specified(farrago.txt)
in my program the code to read the file is:
File inputFile = new File("farrago.txt");
how can i access my file from the jar file??
please help!
zamir

You need to read in the file using loadResource() - see:
http://java.sun.com/products/javawebstart/docs/developersguide.html#dev

ConvertTo-SecureString : The system cannot find the file specified.

Similar Messages

Maybe you are looking for