CONVT_NO_NUMBER Dump error in Process Chain Abap Program

Hi Experts,
The daily running process chain is failed at ABAP program with the error CONVT_NO_NUMBER.
The reason for the exception is:
The program attempted to interpret the value "40-799" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
I am not familiar with ABAP.
Please suggest me how to proceed..
Thanks
<BMP>

Hi,
In ST22
Short text
    Unable to interpret "40-799" as a number.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
     caught in
    procedure "FM_DIR_LIST" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program attempted to interpret the value "40-799" as a number, but
    since the value contravenes the rules for correct number formats,
    this was not possible.
I am trying post the code but SDN is not accepting more than 15000Char's
So can i get ur (mail) details
So that i can send u the exact code...
Thanks,
BMP

Similar Messages

BW: Not getting Dump For Program error in Process Chain

I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

Short dump while activating process chain

Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump

Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain.

I am getting an error in process chain in bw 3.5?

Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
pooja

Hi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

Error in Process chain( Urgent Please )

error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris Gokul

Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun

How can we create the error log in a ABAP program

Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.

Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale

Error in Process Chains

Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
Amit

Hi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@     Errors in source system     @35@
3. @5C@     Error 1 when loading external data     @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you

Error in process chain pushing step

Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...

Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat...

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Errors in process chain

hello gurus,
what are regular errors in process chain during data loads?

Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa.

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

Data load Error using Process chain

Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
Param

Hi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep

Error in Transport of ABAP Program in Process Chain

Hi All,
I am trying to transport a process chain that contains ABAP programs.
I have transported the programs along with the other process chain variants
There is an error that occurs when I transport - "Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L"
The Process chain in the target system is fine except that I am not able to see the ABAP programs in the process chain.
I am not able to locate the error.
Your help will be appreciated
Thanks,
Shruti

If a Process Variant (in this case; 'ABAP Program with success/failed' ) does not exist in the succeeding systems, it is very likely that this Process Variant has been created as a customized variant by a user. Unless the user transports this variant to further systems, this variant cannot be used in the process chain.
Therefore it is better to use general Process Variants (those delivered by SAP) in the process chains. The General Variant here can be 'ABAP Program'.
- Shruti Kulkarni

Abap program variant error in process chain

Hi experts,
I need your help one more time...
In our process chain, we run the program RSIMPCUST to bring currency and units from the source system to BW. We have created a variant to run this program and call it in the process chain. One of the variant's parameter is the logical system, which was configured as our DEV system.
When we transport this process chain to QA and run it, the variant continues to refer the DEV logical system, and not the QA logical system as it should.
any ideas?
Thanks!
Thiago Braga

Values in variants are not converted. You can use the same variant in your ABAP program, but you need to change the value in the parameter for logical system in each system you transport the change to. The only alternative is to create a logical system name in SM59 that is the same in all your BW systems but it refers to the local R/3 system.
In other words, you will have two logical systems in your BWD system pointing to your R/3 Dev. Let's call them R3DCLNT100 and R3SYSTEM, where R3DCLNT100 is also the source system (in RSA1). You can use R3SYSTEM in your variant for your ABAP program. In your BWQ (test system), you will have two logical systems also, R3QCLNT100 and R3SYSTEM, where R3QCLNT100 is also your source system.
Does this help.

ABAP Program error in Process chain

Hi
I have abap process in the process chain which failed frequently with followin error messages
Spool request (number 0000015904) created without immediate output                  SY           355
rocessing completed with errors. See spool list RSAN_PR        022          E
23.02.2009 23:44:47 Job cancelled after system exception ERROR_MESSAGE
Need ur valuable advise to resolve this issue
Regards
ll

Hi
Did you check the data is really retracted to CRM ?
Are you sure the RFC connection works ? Are you sure the user has the authorization to update the data ?
You might have more info in spool log (sp01)
PY

CONVT_NO_NUMBER Dump error in Process Chain Abap Program

Similar Messages

Maybe you are looking for