COOIS report: not able to select operations based on work centers

Hi All,
When accessing the COOIS report using operation listv& selecting the std profile.I need to get the operation perfomred on specific work center.
I enter the work center & plant code in the selection fields available in the "select at operarion level" & i get the all the work center.
Need to get list of operation performed at the entered work center.
The requirement is due to the reason that a order is performed in two or three production facilities & production guys needs to look at operation list for given work centers.
Regards
Vineet

Hi,
This one of the options we had explored, but it would be better if we can get  the report by work center. The focus is to reduce the effort to get the report as there is need to get the same report for atleasr 8to 10 different group of work centers ( which are not in serial nos).
We would then need to put the work centers in the filters & save the layout.
Regards
Vineet

Similar Messages

  • Not able to select paper based on pdf.. yes box is checked

    I have adobe arcobat pro....I need to print loan documents using both letter and legal.....paper source will only chose either legal or letter..What to do, again yes the box is checked chose paper source based on pdf

    Hi,
    This one of the options we had explored, but it would be better if we can get  the report by work center. The focus is to reduce the effort to get the report as there is need to get the same report for atleasr 8to 10 different group of work centers ( which are not in serial nos).
    We would then need to put the work centers in the filters & save the layout.
    Regards
    Vineet

  • Not able to select Operation Mapping in Directory

    Hi,
    I am doing a SOAP to SOAP scenario. Both the inbound and outbound interfaces have 2 operations each. I am facing a strange problem -
    1. in the interface determination, I am able to select the inbound interface for both the operations of the sende interface (value is the inbound interface). But when I  wanted to selct the operation mapping, it shows the defined OMs from the repository but when I select them, it does not show up in the box. I tried using both java 1.6 and 1.5 JDKs.
    2. Since we can have only one sender agreement (though the sender interface has 2 operations), with one communication channel (SOAP sender), how to direct it to the receiver side operations? I am not able to create 2 receiver agreements as it is compalining that it is a duplicate object. If I can not do this, I would not be able to specify the soap action in the receiver channel which actually routs it to the right operation on the receiver side.
    Any ideas?
    Thanks,
    Sri

    Hi,
    >>Since we can have only one sender agreement (though the sender interface has 2 operations), with one communication channel (SOAP sender), how to direct it to the receiver side operations? I am not able to create 2 receiver agreements as it is compalining that it is a duplicate object. If I can not do this, I would not be able to specify the soap action in the receiver channel which actually routs it to the right operation on the receiver side.
    You need to use dynamic configuration, check my rely on this thread
    Re: Consuming web services provided 3rd
    Regards
    Suraj

  • Not able to select setup language while installing Crystal report2011.

    Hi,
    I am using windows 7 and trying to install Crystal report 2011 and SAP BusinessObjects 4.0 on my system. I have Java 7 update 51 version on my system.
    I am unable to select setup language while installing Crystal Reports2011/SAP BO4.0. It does not show default language 'as English' over there.
    It shows all fields with # sign like  #Choosesetuplanguage# and other buttons also appears like this #Ok# and #cancel#. It does not show any language in drop-down, hence I am not able to select language from drop-down box. Drop-down box is blank.
    When I click on #Ok# button it shows new message like #Validation failed#.
    Please help.
    Thanks.

    mmmm. That is odd, must be something missing or permission problem.
    Log out and log back in as the local PC Adminsitrator and do a repair install, may have to completely uninstall and re-install it again.
    That messed up dialog text suggests you don't have something installed correctly or access denied error.
    Look in the install log, should be in your \%user%\AppData\Local\Temp folder. See if it has any access denied errors.
    But try instlaling under local PC Admin account first.
    Don

  • Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.

    Hi
    I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
    I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
    When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
    I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
    I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
    All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
    The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
    So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
    Can you help me solve this problem?
    Regards Henrik

    Hekke44 wrote:
    I do not think it is very user friendly, I must say.
    For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
    Yes, often. That is why it is very obvious and simple for any experienced user.
    Hekke44 wrote:
    Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
    I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional:  you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
    Hekke44 wrote:
    There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
    It would be user-friendly.
    What is your view about these things?
    You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view.

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

    I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

    We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • Not able to select sales area for reference BP in CRM system

    Hi All
    I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
    The field " Choose sale area is subpress/grey.
    Please help me for the same.

    Hi Kishore,
    So you manage get into Sales Area Data, but when you
    try to select Sales Organization you get nothing?
    (click Sales Org combo but no selection appear)?
    How about field Distribution Channel and Division?
    I am afraid some of these fields still not properly
    set/transported to CRM.
    In R/3, this BP has maintained under same Sales Area
    which mapped in CRM Org Model right ?
    What is role in CRM when you open the BP?
    Have you check if there is any error in middleware
    when downloading BP data to CRM?
    Cheers,
    Gun.

  • Not able to select images in iphoto 8????

    Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
    Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
    Please help
    Thank you in advance

    THe basic answer is to export them to a desktop folder and access them form there
    for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
    Larry Nebel

  • How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

    How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

    Use File/Import/Movie and navigate to the file.

  • Not able to select speaker setup in creative audio cons

    Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
    ps.
    Please help? Thanks....

    what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

  • Not able to select a row in ALV in Webdynpro

    Hi everyone,
    I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
    The data gets displayed in the ALV, but always the first row is selected.
    When I try to select another row,I am not able to select.
    Could anyone please suggest what might be the problem ?
    Thanks in advance.
    Regards,
    Kumudha.

    Hi Manas,
    Thanks for the inputs.
    I am placing the code below for your reference.
    I try to change the below as Display Text as Code...But it is not happening Plz check
    method wddoinit.
      if wd_this->ls_setup is initial.
        select single * from yyua_c_setup into wd_this->ls_setup
          where system_id = sy-sysid.
      endif.
      "adjustments for ALV
      data lo_cmp_usage type ref to if_wd_component_usage.
      lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
      if lo_cmp_usage->has_active_component( ) is initial.
        lo_cmp_usage->create_component( ).
      endif.
      data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      data: l_value type ref to cl_salv_wd_config_table,
            lr_header_t type ref to cl_salv_wd_header,
            lv_text type string.
      l_value = l_ref_interfacecontroller->get_model( ).
      data: lr_column_settings type ref to if_salv_wd_column_settings,
            lr_input_field type ref to cl_salv_wd_uie_input_field,
            lr_column type ref to cl_salv_wd_column.
    Set column title and position
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
      lr_column->set_position( 1 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
      lr_column->r_header->set_text( 'Installation' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
         |
      lr_column->set_position( 18 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
      lr_column->r_header->set_text( 'Job profile ext' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
    Hide columns
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
      lr_column->set_visible( 0 ).
      data: lr_functions type ref to if_salv_wd_function_settings,
            lr_function type ref to cl_salv_wd_function,
            lr_button_t type ref to cl_salv_wd_fe_button.
    Add self-defined functions in toolbar
      lr_functions ?= l_value.
      lr_function = lr_functions->create_function( 'SELECT' ).
      create object lr_button_t.
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
      lr_button_t->set_text( 'Select' ).
      lr_function->set_editor( lr_button_t ).
    data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    create object LR_FUNCTION_SETTINGS.
    SET row selectable as true
    CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
    EXPORTING
    VALUE = ABAP_TRUE.
    endmethod
    Regards,
    Kumudha.

  • Not able to select a row in ALV?

    Hi Experts,
    I am enhancing a standard e-recruiting WD ABAP component.
    It produces a search result as ALV.
    I am not able to select any row in ALV by clicking it like we normally do in ALV.
    I wrote below code to allow selection:
    lo_value->if_wd_salv_table_settings~set_selection_mode( cl_wd_table=>e_selection_mode-single).
    Even after this I am not able to select any row by clicking it.
    Need help to solve this.
    Regards,
    Sumit Oberoi

    Hi,
    To have the inputfields for the ALV.
    Get the column references of the ALV table and for each column rference create a inputfield object
    type CL_SALV_WD_UIE_INPUT_FIELD.
    lo_value is model object.
      CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
        RECEIVING
          value = wd_this->lit_columns.
    LOOP AT wd_this->lit_columns INTO wd_this->lis_columns.
          lv_id = wd_this->lis_columns-id.
          wd_this->gref_column = wd_this->lis_columns-r_column.
    case lv_id.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    endcase.
    endloop.
    Or you can take a attribute READ_ONLY for the node to which ALV table is bound.
    Set the readonly property to abap_false (for input field) by looping through the table.
    Get the column references and get the textview reference for each column and use the set_read_only
    method by passing the attribute name.
    This way the textview will now become the inputfield when the read_only property is set to abap_false.
    Regards,
    Lekha.

  • Not able to select annotation in Adobe Reader X

    Hi,
    If I hide both toolbar and navigation panel then I am n't able to select annotation in Adobe Reader/Acrobat X.  This wasn't the case with earlier version of Adobe.
    So is this issue of latest Adobe?
    Regards,
    Arvind

    I checked in version 10.0.1 also. I am not able to select annotation with left mouse button click. This happens only when both toolbar and navigation panel are hidden. You can check this at your end.
    And using RMB click, I am able to select annotation.  I think this is an issue of latest Adobe as earlier we were able to select using LMB click even when both toolbar and navigation panel are hidden.
    Regards,
    Arvind

Maybe you are looking for