Cook book for business package:compensation specialist and HR connectivity

Hi all,
Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
If so please send it to my ID:[email protected]
Helpful docs will be much appreciated.
thanks in advance.
Regards,
Vivek

>
Siddharth Rajora wrote:
> Yes these are the only versions available, no changes have been done
> so you can use it for ehp4
>
> 'BP Compensation Specialist 60.2'
>
>
> there was no plans to release a new version of Business
> Package for Compensation Specialist for ERP 6.0 (ECC 600)
>
> PA-EC is the successor product in ECC 600 and as you have
> seen this BSP works from PA-EC menu (or as a standalone URL)
>
> MSS ECM is the corresponding delivered
> functionality from the Portal side but provides
> specifically manager/employee ECM related actvities and as you have seen
> may not include exactly the same functionality as BP Comp Specialist
> - this is because product area PA-EC has
> original ownership of this BSP, we at EP-PCT-MGR-HR support
> provide support primarily for problems encountered using
> Business Package (BP) for Manager Self Services (MSS) and the
> ECM workset delivered with this BP
>
> you can refer for more information here
>
> http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
HIi Siddharth, thx for confirming, this was my guess.
It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application.
If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that 'BP Compensation Specialist 60.2' could be officially retired.

Similar Messages

Cook book for HR connectivity and compensation specialist BP

Hi all,
Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
If so please send it to my ID:[email protected]
Helpful docs will be much appreciated.
thanks in advance.
Regards,
Vivek

Thanks Brian for your inputs,
I think we should go ahead with atleast deploying the BP and show it to the client to make a decision.
Brian one final questions, I am sure but can you confirm that this can talk to ECC. 6.0 with EP 7.0 .....NW2004s lets say SP11.
the BP documentation says it can be used from NW2004 or NW2004s SP4 or 5 something like that. But since this BP has been avialable even before 2004s was released hence my doubt.
Gogol

New portal forum for business packages?

I think it might be useful to have a separate forum under the portals area for business packages. There is often confusion if a question is related to portal content or portal implementation and a separate forum would help this.
Cheers

Hi Marilyn and Uri
Potential forum name: Pre-packaged portal business content
Forum description: This forum is for discussing the installation and configuration of business packages mentioned in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">Portal Content Portfolio</a>. Topics might include licensing, portal version compatability, and back-end configuration.
Reason for separate forum: A lot of the business packages have a backend component or extra development requirements which goes beyond straight portal details. For example, the XSS (old ESS and MSS) make use of Web Dynpro for Java and some backend ERP or R/3 configuration.
The portal content development forum would still be aimed at those using the PDK and the portal implementation forum would be more about user management and PCD.
Cheers

Cook Book For Collaborations

Hi Friends,
Do any one have <b>Cook Book for collaborations</b>. Can you please send to [email protected] Please do the needful ASAP.
Thanks in Advance!
Thanks and Regards
Praveen

Hi Praveen,
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41d59a90-0201-0010-ba9d-e1c5c0078a71">Cook Book for collaboration</a>
Regards,
Hemalatha
/Assign points if helpful/

Cook Book for PCUI

Hi,
Can any one send me the Cook Book for PCUI.
My id is [email protected]
Thanks.
Muraghendra D

Sent the book to you.
You can also download the same from:
http://service.sap.com/instguides -> my SAP Business Suite Solutions -> my SAP CRM -> my SAP 2005. The title is PCUI Book for CRM 2005.
The direct link is (which may change so I recommend that you follow the menu path) https://websmp209.sap-ag.de/~sapidb/011000358700001093962006E/PCUIBook50_06.pdf
Refer the following weblog
/people/vijaya.kumar/blog/2005/06/10/people-centric-user-interface-pcui--getting-started
<b>Reward points if it helps.</b>
Message was edited by: Amit Mishra

Source Code for Business Package for Products

Hi,
I need to the source code and customization steps for Business Package for Products.
Please let me know how and where can i get this.
Thanks in Advance
Prashil

Augustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this.

Change history of User for Business Partner Number attaching and removing

Hi Experts
Is there any t-code in SRM which will show change history of User for Business Partner Number attaching and removing.
Thanks--
Guru Prasad Dwivedi

Serene,
I am not too sure if anyone can DELETE a Payment Term linked to a BP. The system would not allow this. If at all a Payment term was deleted, I don't think it can be traced.
It is therefore very important to use Proper user authorization so that only people authorized to do certain things are doing it and not everyone.
Suda

Maximum package size for data packages was exceeded and Process terminated

Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.

Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK

Implementation/config guide for "Business package for Product"

Hi,
I need implementation/config guide for "Business package for Product".
If anybody has it please send it to [email protected]
Thanks
Vinit

Did u get the same ?
If u have it can u send it to [email protected]
thanks

Could you send me the ESS MSS Business Packag installation guide and confi

Could you send me the ESS MSS Business Packag installation guide and configuration steps . I wanted to learn ESS and MSS configuration steps
Regards
Jagan

Answer in Short = Yes I can.
Bu the study material is voluminous and cannot be attached so SAP has created a website with all the material in it here is the address: http://help.sap.com
You should find the site very very informative. Good Luck.
cheers

HT1040 I have previously submitted a book for printing three different times and Apple has told me it's been unreadable. I have previously previewed it before sending and it was perfect. I have followed all other directions. Help.

I have previously submitted a book for printing three different times and Apple has told me each time it's unreadable. I have previously previewed it each time before sending and it was perfect. I have followed all other directions - updated software, all other applications off etc. What am I doing wrong?

Boot into Safemode and Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If it is good order while in safe mode
LN

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

You do not merge libraries.
iDevices sync to one and only one computer.
If you want a single library, you manually move the content from one library to another... all content will still be associated with the Apple ID it was acquired with.

CFolders System for Business Package Buyers

I am very new in KM and cFolders area.
Currently we have already installed EP+EPC on Netweaver04s and trying to apply
business package Buyers.
The installation guide of Business package said that we need to have SM59 RFC
connection to cFolder system.
Anyway, as I have little knowledge about cFolder system. I don't know how
I can navigate to that and do the initial testing.
Kindly advise.

Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin

Load balancing for Business Package iviews

Hello Gurus,
we have installed SRM Business packages on our Portal system and accessing the SRM which has 2 application servers.How can we make the iviews to access any one of the application server as the link to ITS in iviews is static.What is the easiest and best approach to get them load balanced using Business Package iviews.
Regards!

Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin

Source Code for Business Package Assets

If anyone customized I would like to know how to get to the Java source code for Asset Business Package
Regards
Mike

Augustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this.

Cook book for business package:compensation specialist and HR connectivity

Similar Messages

Maybe you are looking for