Cook book for configuring NWES

Hello
Is there a cook book sort of article or blog which mentions all the configurations to be done, both in back and front end for configuring NWES?
Regards
Bobu

Hi Bobu,
What are you using it for?
Best regards,
Luke

Similar Messages

  • Cook Book For Collaborations

    Hi Friends,
        Do any one have <b>Cook Book for collaborations</b>. Can you please send to [email protected] Please do the needful ASAP.
                 Thanks in Advance!
    Thanks and Regards
    Praveen

    Hi Praveen,
    <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41d59a90-0201-0010-ba9d-e1c5c0078a71">Cook Book for collaboration</a>
    Regards,
    Hemalatha
    /Assign points if helpful/

  • Cook Book for PCUI

    Hi,
    Can any one send me the Cook Book for PCUI.
    My id is [email protected]
    Thanks.
    Muraghendra D

    Sent the book to you.
    You can also download the same from:
    http://service.sap.com/instguides -> my SAP Business Suite Solutions -> my SAP CRM -> my SAP 2005. The title is PCUI Book for CRM 2005.
    The direct link is (which may change so I recommend that you follow the menu path) https://websmp209.sap-ag.de/~sapidb/011000358700001093962006E/PCUIBook50_06.pdf
    Refer the following weblog
    /people/vijaya.kumar/blog/2005/06/10/people-centric-user-interface-pcui--getting-started
    <b>Reward points if it helps.</b>
    Message was edited by: Amit Mishra

  • Cook book for business package:compensation specialist and HR connectivity

    Hi all,
    Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
    If so please send it to my ID:[email protected]
    Helpful docs will be much appreciated.
    thanks in advance.
    Regards,
    Vivek

    >
    Siddharth Rajora wrote:
    > Yes these are the only versions available, no changes have been done
    > so you can use it for ehp4
    >
    >  'BP Compensation Specialist 60.2'
    >
    >
    > there was no plans to release a new version of Business
    > Package for Compensation Specialist for ERP 6.0 (ECC 600)
    >
    > PA-EC is the successor product in ECC 600 and as you have
    > seen this BSP works from PA-EC menu (or as a standalone URL)
    >
    > MSS ECM is the corresponding delivered
    > functionality from the Portal side but provides
    > specifically manager/employee ECM related actvities and as you have seen
    > may not include exactly the same functionality as BP Comp Specialist
    > - this is because product area PA-EC has
    > original ownership of this BSP, we at EP-PCT-MGR-HR support
    > provide support primarily for problems encountered using
    > Business Package (BP) for Manager Self Services (MSS) and the
    > ECM workset delivered with this BP
    >
    > you can refer for more information here
    >
    > http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
    HIi Siddharth, thx for confirming, this was my guess.
    It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application. 
    If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that  'BP Compensation Specialist 60.2' could be officially retired.

  • Cook book for HR connectivity and compensation specialist BP

    Hi all,
    Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
    If so please send it to my ID:[email protected]
    Helpful docs will be much appreciated.
    thanks in advance.
    Regards,
    Vivek

    Thanks Brian for your inputs,
    I think we should go ahead with atleast deploying the BP and show it to the client to make a decision.
    Brian one final questions, I am sure but can you confirm that this can talk to ECC. 6.0 with EP 7.0 .....NW2004s lets say SP11.
    the BP documentation says it can be used from NW2004 or NW2004s SP4 or 5 something like that. But since this BP has been avialable even before 2004s was released hence my doubt.
    Gogol

  • Cook - Book for Catalog Management CRM 5.0

    HI CRM Gurus,
    Can someone forward me the cookbook for Catalog Management in CRM 5.0? Points will be rewarded.
    Thanks,
    Aji

    Hello Thomas,
    Is this for SRM or Internet Sales?
    regards,
    Muralidhar Prasad Chatna

  • CooK Book for Service Desk in Solution Manager

    Hi,
    Can anybody send me the Cookbook for Solution Manager Service Desk. I need it immediately. Thanks in Advance.
    Ajay

    Check transaction SPRO - IMG
    Follow it as given, this is the "cookbook".
    Markus

  • Application servers configuration: SAP Cook book

    Hi,
    As per the Cook book for the Business Suite on HANA migration, there is no changes required on the application servers .
    Its only that we will have a change in database i.e., instead of db2 , oracle we will have HANA database.
    But a few queries :
    1. If there is no change in configuration required for App. servers,  How does the Application servers connect to HANA DB
    2. Normally to increase the work process with traditional databases like db2, we need to add the memory and additional CPU in DB host server.
    How does one can manage the increase in dialog work process here in HANA i.e., the memory still needs to be increased or it is handled in a different way?
    Please clarify.
    Best Regards,
    DVRK

    Hi,
    As per the Cook book for the Business Suite on HANA migration, there is no changes required on the application servers .
    Its only that we will have a change in database i.e., instead of db2 , oracle we will have HANA database.
    But a few queries :
    1. If there is no change in configuration required for App. servers,  How does the Application servers connect to HANA DB
    2. Normally to increase the work process with traditional databases like db2, we need to add the memory and additional CPU in DB host server.
    How does one can manage the increase in dialog work process here in HANA i.e., the memory still needs to be increased or it is handled in a different way?
    Please clarify.
    Best Regards,
    DVRK

  • Cook book needed...

    Hi all,
    guys could you pls send me the cook book for performance tuning related topics..
    will award points if it helps..
    jag

    Check this.
    <a href="http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_Introduction.asp">Performance tuning - ABAP</a>
    Regards,
    Animesh

  • Student self services - configuration guide or cook book

    Dear All,
    We have recently upgraded to EHP4 and enabled student self services.
    But when I changed my program of study no workflow is triggered in the backend.
    Do I need to do any configuration for this ?
    Is there any configuration guide or cook book available for student self services.
    Thanks in Advance,
    Best Regards,
    Aleem Mohiuddin.

    Hi Aleem,
    You can find cookbooks for configuring SLcM on the following page: Student Lifecycle Management [original link is broken]
    For the 'Change of Program' functionality you need to configure the following workflow to your customer need: COP_APPROVAL (WS template: 29800011 via trx PFWS).
    Please also make sure you have applied note 1321998.
    Best regards,
    Rob

  • Cook required for SAP workflow configuration

    Hi Folks,
    I need a cook book which explains how do we configure SAP workflow.
    Thanks,
    Imran

    Just buy Practical Workflow for SAP 2nd Edition. There is no "cookbook" available in internet. There are some good tutorials etc. Have you gone through the SDN workflow wiki?
    Regards,
    Karri

  • Configuration book for MM

    Dear MM gurus
    Pl suggest any configuration book for MM module
    Rgds
    Kiran

    Hi,
    SAP MM - functionality and technical configuration
    BY MARTIN MURRAY
    publushers : SAP press
    US $ 69.95
    its very useful
    lakshmi reddy

  • Cook book / Solution Map for doing "VMI with APO" ?

    Hello experts,
    we are planning to implement VMI and want to use our SCM50. I'm looking for a little "cook book" or even an SAP solution map which sort of guides through the required settings in APO (and R3). Main focus is to plan replenishment to a customer location from our DC using SNP heuristic and run Deployment / TLB to create the replenishment customer orders in R3. The stock at customer side is non-consigned - so no consignment involved.
    One specific question is how would you create the location products for SNP at customer location side since such cannot be CIFed etc. Manually is no option in case of roughly 3000 products at 4 Customer locations.
    Regards
    Thomas

    Hi Thomas,
    In general, the ERP master data objects plant, customer, vendor, shipping point, etc. are
    transferred as locations.  They differ from each other through their respective location types.
    In SAP R/3 Customizing you assign a node type to the plant, for example, a plant or
    distribution center. To do this, choose Production > Distribution Resource Planning (DRP) >
    Basic Settings > Maintain assignment of node type u2013 plant. By doing this you define the
    location type in SAP APO to which the plant defined in SAP R/3 corresponds.
    If you want to transfer a large number of customers, you create transportation zones in
    which you group multiple customers. The transportation zone is mapped as a location in
    SAP APO with the location type 1005 (transportation zone). You assign the customers
    to the transportation zone using a hierarchy.
    In CFM1, once your selection criteria are entered and upon execution, check whether
    the customer location is getting picked up.
    Regards
    R. Senthil Mareeswaran.

  • Creation of Sale Order for configurable material with availability check.

    Hi,
    We have a scenario in which the material is configurable. The configurable material (X) has few variants (Ex: X1, X2, X3, X4, X5). While booking the sale order, we use the material number (X).
    Further, the material planning is done for the variants X1, X2, X3, X4, X5. The standard variants are planned for production in advance.
    1.     While booking the sale order, we want the availability check of the stock (type matching to happen). What needs to be done in configuration?
    2.     While booking the sale order, there is a possibility that the configuration selected will not match with any of the standard variants due to some additional requirements of the optional features, in such cases how to link the standard variants to the sale order & create requirement for additional requirements.
    Regards,
    Umesh

    Hi Umesh,
               1.Create material master for configurable material and variants in mm01.
               2.Maintain BOM for the configurable material in CS01
               3. Configur the variant configuration steps
                  a. Create charecteristics T.code CT04
                  b. Create values and assign classes
                  c. assign the values to charecteristics
                  d . Maitain dependence  T.code CU01
                  e.create configuration profile t.code CU41
                  f.stimulate the configuration profile.
    4. Do the availability check configuration through this path
    IMG --> Sales and distribution > Basic functions ,> Availabilty check and Transfer of requirements.
    5. Maintain the Availbility check field and MRP views in the material masters other wise you sit with PP people and do that
    I hope it will help you
    Regards,
    Murali.

  • Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

    Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't.  If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

    Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
    The exhaustive list of devices supported by Time Machine amounts to the following:
    AirPort Time Capsule's built-in hard disk (any model)
    External USB hard disk drive connected to a Time Capsule (any model)
    External USB hard disk drive connected to an AirPort Extreme (current model only)
    A hard disk drive directly connected to your Mac
    That is all.
    Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

Maybe you are looking for

  • [HP Expert Day] "You are not able to restore this system with the media"

    Welcome to HP Experts day!  I've got a long-standing problem since last year. Let's see if you can solve this!   I'll get straight to the point :  I am unable to perform recovery on my system. This is the error message :  It's a USB recovery media cr

  • A question about CREATE PUBLIC DATABASE LINK and ORA-12154 error

    Dear all, I have a problem about public database link creation and I would appreciate if you could kindly give me a hand. I have the following connection parameters in my tnsnames.ora file: DGPAPROD.WORLD =      (DESCRIPTION =        (ADDRESS_LIST =

  • How to restore a file from timemachine under yosemite

    Hello Mac User since 1984 ! Mac recent Mini under Yosemite and TimeMachine on Hard Disk (1To) No problem before to restore a file by choosing a previous date with yosemite impossible to select a file and choose a date in the backup So ?? Thks

  • Urgent: Batch Management

    Hi All I have to mave a material stock which is managed in batches. I have created STO. Created Delivery with delivery type NLN In PGI - VL02N - i want to pick the stock batch wise. Now can i do that? When i click on 'Batch Split' TAB and enter the b

  • How do you drag and drop music into the latest version of ITunes?

    In the old itunes i could just drag and drop music that i downloaded directly into my itunes but now when i try to do that it doesn't allow me Does anyone know how to fix this or know how i can import the music i have downloaded?