Cookie Cutter Tool in Photoshop Elements 11

I am unable to make a shape from a photo using the Cookie Cutter Tool. I duplicated the photo. Clicked on cookie cutter icon. Created shape. Clicked on green check mark. The new layer is transparent. I cannot make the shape appear. Thanks. Helen

Hi Joe,
Thanks so much for your response.
The shape does not appear on the duplicate layer once I click the green check mark.
I clicked the eye symbol on the original layer per your suggestion. The second layer is a checker board, which I understand indicates transparency.
The shape does not show at all in this second (duplicate) layer.
I know this will be a V-8 moment once I realize what I have done. Thanks again.
Helen W. Allen
(410) 342-0368

Similar Messages

  • Adding cookie cutter shapes to Photoshop Elements 7.0

    I have Adobe Photoshop Elements 7.0, and I was wondering if there was a way to add cookie cutter shapes to the images the program already comes with. Any help would be greatly appreciated. Thanks!

    In addition to suggesting that David post the Photoshop Elements part of his upgrade question on this forum, I had posted some comments in his original thread over on the Premiere Elements forum. I will repeat those comments here so that others on this forum can make comments against my recommendations.
    In general I think that your PSE 3 tags and collections will be carried forward when your catalog is upgraded from PSE 3 to PSE 7. What were "Collections" in PSE 3 will become "Albums" in PSE 7.
    Now it is very important that in the PSE 3 Organizer BEFORE your catalog is upgraded, you do
    -- Reconnect All Missing Files
    -- Catalog Recover
    These commands are available from the File menu of the PSE 3 Organizer. They "clean up" your existing PSE 3 catalog and a clean catalog can avoid many potential problems during the upgrade process.
    You did not ask about any "Creations" in PSE 3 and I do not think the Creations (Slide Show or Photo Book is an example of a creation) will carry forward from PSE 3 to PSE 7. So it is good if the info that you do need is the PSE 3 Collection rather than a PSE 3 Creation.
    Here are some Adobe techdoc references about upgrade to PSE 7 Organizer
    http://www.adobe.com/go/kb404990
    http://www.adobe.com/go/kb404991
    and in general I would scan the list of top issues techdocs at
    http://www.adobe.com/support/photoshopelements/
    The 2 I suggested above are on that list.
    Be aware that the format and folder locations of the PSE catalog changed significantly between PSE 5 and PSE 6 (the 1st techdoc discuses this), so as you are migrating from PSE 3 to PSE 7 there will be some difference and how much you notice differences may depend on how deep you went in to PSE 3. The second techdoc, which discusses placing the PSE catalog in a non-standard folder location is one example of such a case. I say this not to scare you, but instead to make you aware of the potential for differences if there is initially a glitch in the upgrade process on your system.

  • How do I use the cookie cutter tool?

    I have a lot of questions to ask on how to use this program. I have Adobe Photoshop Elements 8, and I can't seem to get the tools to work. I click things on and nothing happens or I get a buzz indicating that whatever it is I want to do, I can't. I went to the cookie cutter tool and clicked that on. I figured out how to pick a shape, but then what? No matter what I clicked, nothing happened. How do I get it to work? I have a book called 'Teach Yourself Visually Adobe Photoshop Elements 8' and the pages are very clear, but whatever options are given in the book, I can't find in my program. I am sure part of the problem is that i have this program on a Mac. Maybe the Mac version doesn't work like the PC version. I can't seem to find any directions for this. I clicked on help and it brought me to a web page for Mac Photoshop Elements 8, and I did a search for 'cookie cutter' and nothing came up. I also looked at all the options available for help and didn't see any 'cookie cutter' tool instructions. How can I learn how to use this software? Thanks for any help.

    I don't remember what the directions were yesterday, when I was experimenting with Photoshop, but I believe that the directions told me to use the custom shape tool, but I couldn't find it. It said to click on the rectangle, and a menu would come up, but no menu came up. So I thought I would just experiment and click on 'cookie cutter' and see what would happen when I clicked on it. I tried using some keyboard shortcuts to see what would happen (just trying to figure out how to get something to work) and at the web site for Photoshop for Mac, it said to click 'Q' (I can remember what was supposed to happen), but I clicked 'Command' and 'Q' at the same time and it closed the program! The web site didn't say which other key to use with the Q, and nothing happened when I just clicked the Q. Another thing I was trying to do was to make something in Photoshop (this was on another web site) and I had to go to 'window' then the next step was to go to 'channel' and click it on. I went to window and there was no 'channel' in the drop down menu. There were other options, but no 'channel'.

  • Using the cookie cutter tool

    I am having trouble cropping a photo with the cookie cutter tool. When I drag a shape over my photo, my photo disappears, leaving the gray/white checkerboard. Any advice?

    elspacho
    From the nature of your question I think that you have posted in the wrong forum. Somehow your thread was posted in the Adobe Premiere Elements Forum (video editing).
    If your thread question is as I believe a Photoshop Elements question, then please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to move your thread from here to there.
    Photoshop Elements
    Thank you.
    ATR

  • How do you change radius with rounded square cookie cutter tool?

    The radius on the cookie cutter tool is a bit too much for me. I need rounded corners, but smaller radius. 10px if possible.
    Any help would be great, as I am very new and using Photoshop Elements 10

    There's not an easy way to do that, so you may have to use the Rounded Rectangle Tool instead.
    Grouped with the other shape tools in the toolbox.
    Message was edited by: R_Kelly

  • I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus.  How do I fix this?

    I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus.  I've reinstalled twice and it will work for a little while and then get stuck again.  When I select something, I have one shot at it and as soon as I let go of the mouse it switches to minus and I can't add anything else.  How do I fix this?

    When a tool misbehaves, go over to the far upper right corner of the tool options area and click the four-lined square. Choose Reset Tool from the popout menu.

  • PSE 6 for Mac: Only have one shape in the Cookie Cutter tool

    I just installed PSE 6 for Mac and am getting familiar with it. When I tried to use the Cookie Cutter tool, I have no choices (no black arrow next to the star in the toolbar) and it always is a 'heart' (cute, but was hoping for more choices). Any suggestions on why this is, and how to repair? Thanks in advance for any help...

    Actually, I found the answer...disregard my question. Newbie error. Thanks for understanding!

  • Straighten tool in Photoshop Elements 12

    When I use the straighten tool in Photoshop Elements 12 and click on the "Grow and Shrink" and then check the "autofill" my picture is straightened but it is not autofilling.  Instead I see the black and white checkered background in the areas where it should have autofilled.  I do not know what I am doing wrong?

    I have Windows 8

  • I try to use the tools in photoshop elements 13, instead of one of the tools I only get the eraser. Whatt can I do?

    When I try to one of the tools in photoshop element 13 I get always the eraser. I push the brush. But I het once again the reaser.  What can I do to get one of the other tools? Joost van Santen

    Thank you very much. It helped. Joost van Santen
    Joost van Santen Light Art
    Kiefskamp 6  NL1082KA Amsterdam Netherlands
    T 00-31-20-6125404
    documentation <http://www.joostvansanten.nl>
    inspiration <http://www.lightart.nl>
    Op 12-11-14 21:06, Barbara B. <[email protected]> schreef:
    I try to use the tools in photoshop elements 13, instead of one of the tools
    I only get the eraser. Whatt can I do?
    created by Barbara B. <https://forums.adobe.com/people/Barbara+B.>  in
    Photoshop Elements - View the full discussion
    <https://forums.adobe.com/message/6923517#6923517>
    Go to the editor preferences>general, click this button and restart the
    editor: 
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6923517-694468/pr
    efs+reset.gif 
    <https://forums.adobe.com/servlet/JiveServlet/showImage/2-6923517-694468/prefs
    +reset.gif>
    Please note that the Adobe Forums do not accept email attachments. If you want
    to embed a screen image in your message please visit the thread in the forum
    to embed the image at https://forums.adobe.com/message/6923517#6923517 Replies
    to this message go to everyone subscribed to this thread, not directly to the
    person who posted the message. To post a reply, either reply to this email or
    visit the message page:  To
    unsubscribe from this thread, please visit the message page at
    . In the Actions box on the
    right, click the Stop Email Notifications link. Start a new discussion in
    Photoshop Elements by email
    <mailto:[email protected]ware.
    com>  or at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
    &container=3347>  For more information about maintaining your forum email
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    >

  • Is there a pen tool in photoshop elements 10?

    is there a pen tool in photoshop elements 10?

    No.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Where do I find the copy stamp / tool in Photoshop elements 12?

    Where do I find the copy stamp / tool in Photoshop elements 12?

    Hi,
    Make sure you are in Expert mode (click on Expert at the top).
    The Clone stamp tool appears in the Enhance group - make sure the tool option is set correctly.
    Hope that is the one you want.
    Brian

  • Dodge Tool in Photoshop Elements 8

    Hi There, I have just tryed to adjust some pictures in my new photoshop elements
    and can not find the dodge tool ANYWHERE, I am getting very frustrated as this is
    one of the tools I use the most to adjust pictures of my work. Any help would be
    very appreciated. If it is not included in elements is there any way to download it
    as an extra?
    Thanks

    You can bring up the dodge tool by pressing O on your keyboard. This would toggle between Dodge/Burn/Sponge tool each time you press O.
    Here are the shortcuts which would come handy to you while accessing tools:
    a
    Selection Brush
    b
    Brush(Pencil)
    c
    Crop
    d
    Default Foreground &   Background Colors
    e
    Eraser
    f
    Magic Selection Brush
    g
    Gradient
    h
    Hand (or hold down the space bar)
    i
    Eyedropper (or hold down Alt)
    j
    Healing Brush (Spot Healing Brush)
    k
    Paint Bucket
    l
    Lasso
    m
    Marquee
    n
    Pencil (Brush)
    o
    Dodge (Burn, Sponge)
    p
    Straighten
    q
    Cookie Cutter
    r
    Blur (Sharpen, Smudge)
    s
    Clone Stamp
    t
    Type
    u
    Custom Shape
    v
    Move (or hold down Ctrl)
    w
    Magic Wand
    x
    Switch Foreground & Background   Colors
    y
    Red Eye Removal
    z
    Zoom

  • Can't see all tools in Photoshop Elements 11 on Mac

    I just got Photoshop Elements 11 for my mac today however I cant seem to use all the tools. The tool bar cuts off after the cookie cutter option in modify and I cant scroll down to reach the rest of the opions. Is there anything I can do to see the rest of the tools. Thanks in advance to anyone who can help me.

    Is this a first generation macbook air? If not, check that your screen resolution is where it should be, i.e., the highest possible pixel count, in system preferences>displays.

  • Where can I find the colour range selection tool in Photoshop Elements 11?

    Note: It is not under the Selection tab in the menu. This tool is very useful and Adobe help is making it very hard to find.

    The Select>Color Range is only in the full versions of photoshop such as photoshop cs6.
    As far as i know that's never been available in photoshop elements (from the factory sorta speak) except in version 3 using an action created in photoshop.
    There are many other ways to make selections in photoshop elements.
    As a side note and not really pertaining to your version of elements, years ago back in the pre os x days, there was a plugin for photoshop/photoshop le/pse 1 on macs quite similar in function to select>color range.

  • How do I reset tools in Photoshop Elements 12?

    How do I reset all tools to default in Photoshop Elements 12?

    You're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

Maybe you are looking for

  • Problem with application deploy

    Hi all, I have a problem. I'm migrating a local project to NWDI and after i migrate all my stuff when i try to deploy the following error appears and the deployment is aborted. Result => deployment aborted : file:/C:/DOCUME~1/MCASTI~1/CONFIG~1/Temp/t

  • Error Code when trying to burn from a burn folder

    Hey everyone, I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy. I was trying to burn some files onto a CD, it recognized the blank CD, displayed it in my finder as well as the burn icon, I had

  • Costing against Sales Order

    Hi, We are manufacturing a FERT material with strategy 20 MTO Production. we create a sales order and against sales order we run MRP to generate a planned order, then we convert the planned order to production order. Our entire planning is based on s

  • 'BAPI_DOCUMENT_CREATE2': store attachment using 'SAP-SYSTEM'

    while i am checkin a document (attachment) using storage category KPRO ,the document is getting stored but when i use SAP-SYSTEM the Document is not getting stored. How can I get it stored using 'SAP-SYSTEM' Following is the code; DATA: lv_docnum TYP

  • How can I clean up my G4 to run faster?

    Is there software out there to clean up my G4 and make it run faster