Cookie will not write using weblogic 5.1 and Apache

          Hi,
          I'm having problems having my application write cookies under the UNIX environment. It works fine under
          the NT environment. Could this be a problem with the Apache plugin and weblogic 5.1???
          Under the UNIX environment, it will not write to the cookies at all. Is it because I have weblogic and apache
          on two sperate machines?? Any advice would be much appreciated.
          Thanks,
          Wayne

There is no apache 2.x plugin for WLS 5.1.
Sorry,
Eric
"sridhar" <[email protected]> wrote in message
news:[email protected]..
Hi
I am trying to use the webservices of apache 2.x server. I am usingweblogic 5.1 application server. Can you give the details of installation
and configuration of plugins which is compatable for the version as i said
above? As far as i search on BEA site i didnt get the solution for the
version i mentioned. An early reply is expected.
>
Thanks a lot
sridhar

Similar Messages

Calendars will not sync using current iTunes (Mac) and iPhone software

Since the newest update to iTunes (Mac) 10.5.3 (3) my iPhone will not sync my calendars from my iPhone (5.0.1). This is a huge problem considering I am out of my office most of the day, and rely on my calendar to keep me in the right place. For the last week I have had to manually enter events on both my iPhone and my computer. My computer is older and does not allow the operating system Lion, so I am running Snow Lepord OS 10.6.8. Therefor, I can not use iCloud to sync any of my iPhone information.

I finally found how to reset SyncService history through the Terminal port. After I did this it all started to work correctly again.
http://support.apple.com/kb/TS1627
Thanks for all of your help.

External monitor will not sleep using 2012 MacBook Air and HDMI adapter

I am running a HP 27xi (27" display) using the apple thunderbolt to HDMI adapter, and using a HDMI cable.
ISSUE:
I run my 2012 macbook air in "clamshell mode", and solely use the 27" display, which works great. Problem, is when the macbook goes to put the display to sleep, or sleep for the laptop, the display starts to go into power save mode, then flips back on... goes back into power save mode, repeats forever. I called HP, and they said the HDMI signal is not being turned off, hence why the screen keeps going ON, then power save, then repeat. If I shutdown the laptop, then the monitor goes off just fine.
Anyone else ran into an issue with an external monitor NOT going to sleep when plugged into the HDMI adapter? Someone suggusted that I purchase a DVI-D adapter, and use that cable... but that sounds ridiculous. The HDMI adapter should absolutely work.
My temporary fix is to turn off the monitor everytime (if i remember) otherwise the display is in this never ending loop of trying to shut down.
And yes, the Macbook Air is 100% up to date with updates. DRIVING ME CRAZY!!!
Joe

Hello Joe,
I definitely understand your concern regarding your external display not going to sleep and endlessly looping into power save mode when your MacBook Air is asleep.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to the internal display. The following steps specifically stands out to me for the situation you are experiencing:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for using Apple Support Communities.
Best,
Sheila M.

Farmville will not load using Firefox, but it will with IE, for over a week now.

Farmville will not load using Firefox, but it will with IE, for over a week now. I have cleared the cache and cookies multiple times, updated flash player, did a virus and malware scan, allowed java script, allowed mozilla in the Windows firewall, contacted Zynga multiple times, and yet Farmville still will not load using Firefox, my main and preferred browser. I'm very frustrated and want this fixed.

Thanks for the advice cor-el, but if you would read the info I posted, I already did that, SEVERAL TIMES. That's not the solution unfortunately.

IPhoto 9.2 photo descriptions will not write - after a few letters words self erase!

iPhoto 9.2 photo descriptions will not write - after a few letters words self erase! Program update downloaded earlier today, 24.10.11. Fine on my laptop, but my desktop is having problems.

Rebuild the main library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

That code is not really useful since it just means it can't write DVD's (or probably CD's). The only thing you can do is first to try a different brand of DVD's, higher quality. You could also try burning at a slower speed.
Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related. You may also have a failing Super Drive, another consequence of an older Mac.

OPC will not write to AB L32E - Will Read

OPC will not write to AB L32E - Will Read.
I have been able to set up a OPC Server using the NI OPC Server, using the ControlLogix Ethernet driver for the AB 1769-L32E PLC.
All of the tags can be seen. The Lookout 6.7.1 will see real time data, but anything I write too, never shows up in the PLC.
Using the OPCclient in Lookout. Their is No alarm's, other than a value has been adjusted by direct user input..
Their is no comm errors.
I just purchased this software last month.
The NI OPC Server, Events, no errors.
Thanks.
Dave
Solved!
Go to Solution.

Thanks for your posts because I knew this should be possible. Here is what I found. Check step 4 of your channel in case your value updating is wrong or Step 11 of device is set to do not create on startup.
Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
Step 2: Device driver will be ControlLogix Ethernet. You can also enable diagnostics if you want.
Step 3: Network adapter. I used default setting.
Step 4: Write only latest values. Duty at 10. ( These are default settings and are recommended.)
Step 5: Finish new Channel setup
Step 6: Click on Icon to create new device
Step 7: Device Name can be whatever you chose.
Step 8: Select Device Model in this case CompactLogix 5300
Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0 (Note the 1 directs path to backplane. The 0 to the slot where processor is)
Step 9: Device timing. Leave at defaults.
Step 10: Auto demotion leave unchecked.
Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
Step 12: Port and watchdogs at default settings
Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
Step 14: Create tagname from device.
Step 14: Finish Device setup.
You now have two options.
Option 1: Start creating tags as you need them. (This is what I did)
Option 2: Right Click newly created device and select properities. Then select database creation and click auto create.
Go To Lookout and create new driver.
Select OPC Client
Server name will be from dropdown menu. National Instruments:NIOPCServers
Click okay
You should be done and smiling.

Maxl Script will not write to error file for data laod.

Sorry Glenn here is the new thread. I re ran without the semi colon after data 3 and the same error came up without anything being written to the error file.
I purposely removed a member from the orginal outline that is included in the data loaded but yet the error file is not written to. I tried doing the load manually but executing it in the background, error file is to be created on my local HD but it does not write it there. Checked the output and it is written to a directory located on the server. Although i think this is normal.
Could it be that it will not write to a local drive? I am going to try specifying a spot on the server to see if it runs there.
thanks
Original post below.
Hello,
I am also having this issue.
I will include my script below but will state some details before
We are on Essbase 11.1.1.3
I am running Admin Console from my client PC that connects to the server in the script and I read that in this set up the error file will not get written to. This documentation was for v 9.1.3
Here is my script (i changed some of the names)
login 'user' 'password' on server';
create application 'Money1' as 'Money2';
spool stderr on to 'errorfile';
import database 'Money1'.'Main' data
from local text data_file 'Money1_Data.txt'
using server rules_file 'Data3'
on error append to 'dataload.err';
execute calculation 'CALC ALL;' on 'Money1'.'Main';
logout;
spool off;
exit;
here is the error output i get:
code line: on error append to 'dataload.err';
Statement executed with warnings.
(3) Syntax error near ['$']
I don't see a dollar sign anywhere in my code and the error file does not get produced.
Also do error files get written too if the actins are executed in the background?
Thanks!
Alex

This works for me in a MaxL script run through essmsh.exe:
import database appname.dbname data from local text data_file "d:\\datafilename.txt" using server rules_file "rulename"
on error write to "d:\\errorfilename.err" ;Sometimes EAS (I think you are running it through that) does weird things to MaxL. I eschew MaxL in EAS as much as possible (like 100% of the time).
NB -- the datafilename and errorfilename and their drive letters are local to wherever you're running this process through the MaxL shell. I don't know how that works when you're running EAS -- are drives local to your session, local to the EAS server? Dunno. Leave EAS behind, buy TextPad (no I am not the author of that fine product) and download the MaxL syntax library, and be happy. :)
Regards,
Cameron Lackpour
Edited by: CL on Oct 7, 2010 7:12 AM
Put the MaxL into a code block to get it to display correctly.

Since I installed the new version 17.0.1, third party cookies will not stay selected after I close the browser...

Simply -- third party cookies will not stay selected after closing the browser and I have to select it for each time to use certain cookies from websites...

You may need to create an allow exception to keep specific cookies.
*http://kb.mozillazine.org/Cookies
In case you are using "Clear history when Firefox closes":
*do not clear the "Cookies" and the "Site Preferences"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Tethered 30D will not write to CF card

When tethered to Lightroom 3.3 my Canon 30D will not write to the CF card although the tether functions ok.
I understand I can go through Eos Utility but I would rather not use it due to problems caused by cable unplugs etc.
Anyone solved this problem yet ?

Hi Pete,
Thanks for your quick response. But the 30d has only a setting to shoot with or without card, either setting are with the same result only writing the files to the computer.
B.M.

Meta Data Will Not Write! I've tried everything...

So, I love LR very much, except for the fact it WILL NOT write metadata. I've done numerous tests with Picasa, IrfanView, and other applications and while other applications successfully write to the IPTC header of the jpg or sidecar, I cannot get LR to write any of the metadata for the life of me. I've turned on and off the "Write XMP" checkbox in the options.
I've waited a substantial amount of time, then checked the file in a reader app and never see any kind of change to the file.
Why won't Lightroom write the metadata through to the file? It reads it in fine, but I cannot get it to update the file.
Thanks for your thoughts.

There's another issue here. Depending on what you're looking at it with, the programs cache. I was going crazy thinking they were not being written by looking with exifer and several other programs. Someone said try Bridge, which I'd never used, and voila, they were there. Bridge ALSO caches, but there is an option to empty the cache for this folder and you have to do that every time you want to check if Lightroom has written something. If you're on Windows, Microsoft Photo Info does display some metadata fields and does not have the caching problem.
In my case, I'm checking dates I'm writing in exifer for Lightroom, since Lightroom can't write capture and digitize dates.

My iPad 2 will not restore using iTunes. It keeps telling me - the iPad "iPad" could not be restored. An unknow error occurred (4) - I have tried every suggestion I could find so far. Any ideas as to what I can do?

My iPad 2 will not restore using iTunes. It just quit a week or two ago and showed that I had to connect to iTunes.
When I do the "restore and update" it does not complete the "verifying iPad restore with Apple" and then shows the following message:
The iPad "iPad" could not be restored. An unknown error occurred (40).
I have tried it a number of times. Also turned of anti-virus and firewall. Tried on different computers. All resulted in the same message. The iPad is only 2 1/2 years old, so I hope it can be fixed.
Does anyone have a solution?
KandAfromMO

Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311

TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here

Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. Any help?

Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks

I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps!

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Cookie will not write using weblogic 5.1 and Apache

Similar Messages

Maybe you are looking for