Cool part time job....check this....

Hi,
This is a genuine oppurtunity to work from home.
You a get paid an initial amount of Rs.100 if you just sign up. Then your job will be posted to you.
Its cool. Try it out and see for yourself. After signing up, click on My Earning Link for proof. You`ll know the truth.
Job is only through Internet. Work part time. You can earn Rs.750-2000/- daily. These are genuine Internet jobs. No Investment required.
For more details visit http://www.earnparttimejobs.com/index.php?id=762838

hi ,
i dont know whether this is a good or fake link .. but
when i signed up in the site i got the following link ..
[http://www.earnparttimejobs.com/index.php?id=1144392]
looks pretty good but cant keep and eye over it for long

Similar Messages

Seeks the LabVIEW part time job ,Beijing China (6 years exp)

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Seeks the LabVIEW part time job ,Beijing China

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Looking for LabVIEW part time job ,Beijing China

Seeks the LabVIEW part time job ,Beijing China The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Siemens CompanyTips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email: [email protected]

you can visit my website: www.bjcyck.com

Looking a part-time job

Dear all:
I've use LabVIEW to develop test software more than 4years. I'm looking a part-time job now.
E-mail: [email protected]
¤╭⌒╮ ╭⌒⌒╮
╱-◥?80?80◣ ╭ ╭
︱田︱田田|
Boone Mail:[email protected]
QQ:24732458
QQ Group:13267790
QQ Comp: 17756234
╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬
Boone

This thread is for posting of job openings, You will probably have better luck posting on the thread for those looking for positions.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Looking part time job or project.

Hi,
I am Labview certifier
Developer(CLD). and I am looking part time job or project. If any one
intreast ,so please mail me on [email protected]
Thanks
labview.solution

Maybe adding your location would help?
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Create new jobB,fill jobB with part of jobA & delete this part from jobA

Hi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI.Could any one tell
me how to resolve this? Any information will be help full.
it is necessary create a new job with part of the programs that exist in
the Job JCATALYST_1 , and alter this job, deleting the part that will contain
in the new Job CATALYST_MOGI.
It´s required to create a copy of the Job CATALYST_1 like Job CATALYST_MOGI.
In the Job CATALYST_1, delete the part that contain the execution of Mogi jobs.
In the Job CATALYST_MOGI, delete the part that contain the execution
of others Jobs and just need to stay in this job execution that refers to MOGI Jobs.
Tthe execution that refer to Mogi Jobs is highlighted with "*in the below lines, that
must be delete of CATALYST_1
And must be executed in the new Job CATALYST_MOGI.
Currently the log of Catalyst_1:
Data       Hora     Texto mensagem
Regards,
Sonam
Edited by: sonamrata on Apr 20, 2010 11:53 AM
Edited by: sonamrata on Apr 20, 2010 11:57 AM

Hi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI. We have job CATALYST_1 with log entries as below.
Now I have to 1)create a new job CATALYST_MODI (I can do this using SM36 tcode.)
                        2)put some ofthe log entries into job CATALYST_MODI(highlighted by "* iin below logentries)
                        3) delete these entries from CATALYST_1..
In other words I have to include programs ZSYSDI_PARTS_HOLD_RELEASE and ZSYSDI_CALL_SHIP
in the new job CATALYST_MODI and delete these programs from Job CATALYST_1.
Currently the log of Catalyst_1:
Data       Hora     Texto mensagem
16.04.2010 10:40:44 Job executado
16.04.201010:40:44 Etapa 001 executada
(program.ZSYGLI_CONTROL_INTERFACE, variante ,
nome usuário MAESTRO)
16.04.2010 10:40:44 Enqueue em tabela Interface 0
"*16.04.2010 10:40:44 Buscando Diretórios das Interfaces
"*16.04.2010 10:40:44 Busca Arq. de ls -tr
'*/me/proj/BZLSBYSNG/SDI2034/InBound/sap/MOGI
"*16.04.2010 10:40:45 Start JOB CTR_INTRF-SD.I.2034M
'*ZSYSDI_PARTS_HOLD_RELEASE
"*16.04.2010 10:41:44 Aguardando JOB CTR_INTRF-SD.I.2034M 0
"*16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI0404/InBound/sap/MOGI
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.0404M ZSYSDI_CALL_SHIP
16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI2034/InBound/sap/SOR9
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.2034S
Regards,
Sonam

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

Cool new iPad case check this out!

http://www.kickstarter.com/projects/revolve/clutch-ipad-case-system
i found this today browing around this is really cool.

Not available. As it says on their web site, they're fishing for donations to try and bring this product to market.

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

All timer jobs don't start (paused in check job status)

Hello,
Some bad things have happend to our SharePoint Server 2010. All timer jobs suddenly stopped running. The last time they ran successfully was 09/26/11. Since that time all jobs have been scheduled to run according to their schedule but don't actually run.
In the Check Job Status view there is a list of jobs scheduled to run 09/26/11 which are currently paused for some reasons, other jobs don't run at all.
Is it possible to unpause these jobs and let other jobs to run? Any ideas would be very much apprecaited. Thank you in advance.

Hi,
Thanks for your post.
Pausable Timer Jobs
You can now create pausable timer jobs. This is done by inheriting from the
SPPausableJobDefinition and overriding Execute(SPJobState) instead of
Execute(Guid). You can then use the current job state (SPJobState) to store values which are retrieved when the job is resumed.
Running jobs on all content databases
Another new timer job derivative type is the SPContentDatabaseJobDefinition.This is a timer job specifically made to perform actions on content databases. The timer job is distributed on the WFE servers and each content database is only
processed by one job. Override the Execute(SPContentDatabase, SPJobState) to add your own processing. The job supports pausing.
Running jobs on all Site Collections
A really interesting new timer job type is the SPAllSitesJobDefinition. This one is derived from the SPContentDatabaseJobDefinition and has a method called
ProcessSite(SPSite, SPJobState) which you override to process the SPSite object. This could be very useful to build site inventories/directories.
Running job on a specific server
The SPServerJobDefinition is a pausable timer job that is designed to be targeted to a specific server (SPServer).
Running jobs for specific services
The SPServiceJobDefinition is another pausable timer job that runs a job on all servers where a specific
SPService has been provisioned. A very similar job is the
SPFirstAvailableServiceJobDefinition which runs the job on the first available server which has a specific SPService installed. If you would like to run a job an all servers you can easily use SPServiceJobDefinition. Then use the timer job service
(which is installed on all servers, except dedicated database servers) and pass
SPFarm.Local.TimerService as the SPService parameter in the constructor.
All of the new specific timer jobs are essentially smart derivatives of the SPJobDefinition but using these new abstract classes will certainly save you some time when you need to target your timer jobs.
I hope that helps.

Audit log trimmer timer job

HI
Audit log trimmer timer job
what this job do
I set the sitecollection audit settings to trim the audit data after 7 days
is this job before delete it generate Excel report and save in document library?
adil

The job 'Trims audit trail entries from site collections.'
It runs by defualt every month, which means you need to adjust the schedule so that it runs weekly so that it'll pick up your accelerated audit rules.
This is the job that exports the data to Excel and cleans up the entries from the database.

Why we are using event receivers in creating timer jobs?

Hi All,
Why we are using event receivers in creating timer jobs?
Thanks in advance!

Hi,
Suppose you are creating a custom timer job following the steps which are similar as what this demo provides:
http://www.codeproject.com/Articles/403323/SharePoint-Create-Custom-Timer-Jobs
In this demo, an Event Receiver is created for installing the Job Definition when we deploy the solution or uninstalling it when we extract this solution.
Here, the Event Receiver listens to the FeatureActivated evetn and the FeatureDeactivating event, which corresponding to the timing of activating and deactivating the feature
of this solution, it just like a switch during the life cycle of a solution in a SharePoint site collection which will make us easier to manage the features coming with a solution package.
More information about feature and solution:
http://msdn.microsoft.com/en-us/library/office/aa543214(v=office.14).aspx
https://www.simple-talk.com/dotnet/.net-tools/using-features-and-solutions-to-deploy-your-sharepoint-customizations/
Feel free to reply if this is not what your question about or there are still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

Cool part time job....check this....

Similar Messages

Maybe you are looking for