Cooler running since firmware upgrade
Has any body else noticed a significant decrease in running temps since the firmware upgrade? I can now use it as a LAP top computer, whereas before it reguired a cooling pad just to use.
17" MacBook Pro
G4 1 Gig - Digital Audio Mac OS X (10.4.6)
Like tcdm said, the timer is based on the rate of drainage at that particular moment. Think of the timer being like the battery indicator of the ipod. On hard drive-based ipods, the battery indicator can tend to make a quick plummet when accessing music or larger files like movies. The battery is basically telling you how much is left based on the rate of power usage at that particular moment, but then when the hard disk stops spinning the indicator jumps back up with just a little taken away. If you see 5 hours at one moment, accessing large files(which kicks the HDD into motion) will suddenly put you at a little less. I set a stop watch on my macbook while it played a movie in MPEG-4 format. after playing movies continuously from full charge to near empty i got about 4 hours (roughly 3:53 by my watch) I count the time from full charge to the moment i get the first battery low warning. after that its just a few minutes before the computer sleeps to decrease the rate of power usage. So far no big changes as far as i can see, I think this firmware update mostly addresses the issue regarding the cooling system readings rather than energy efficiency, but who knows.
Similar Messages
-
Amazing improvements since firmware upgrade
Hi, I have had a pretty much trouble free (i still have an annoying CPU whine that applestore says is just my young ears being sensitive. Im 20 not stupid!!)
macbook, week 35.
I updated the firmware and now it runs VERY cool, and the battery life has become amazing!!!
4 hours-4 hours 20 mins, running full brightness and on airport connection.
It used to max out at 2.5 hours..
Also the sound is louder through the speakers.
Also, can I just say WOW I installed windows xp with bootcamp and it is AMAZINGLY fast. I did it for my games,
and the graphics card seems to handle the sims 2 perfectly at high settings.
It looks great!!
SO in my opinion the firmware upgrade gets the thumbs up!!Like tcdm said, the timer is based on the rate of drainage at that particular moment. Think of the timer being like the battery indicator of the ipod. On hard drive-based ipods, the battery indicator can tend to make a quick plummet when accessing music or larger files like movies. The battery is basically telling you how much is left based on the rate of power usage at that particular moment, but then when the hard disk stops spinning the indicator jumps back up with just a little taken away. If you see 5 hours at one moment, accessing large files(which kicks the HDD into motion) will suddenly put you at a little less. I set a stop watch on my macbook while it played a movie in MPEG-4 format. after playing movies continuously from full charge to near empty i got about 4 hours (roughly 3:53 by my watch) I count the time from full charge to the moment i get the first battery low warning. after that its just a few minutes before the computer sleeps to decrease the rate of power usage. So far no big changes as far as i can see, I think this firmware update mostly addresses the issue regarding the cooling system readings rather than energy efficiency, but who knows.
-
HDMI output not working since firmware upgrade
I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card. -
WAP321 Dropping Connection since firmware Upgrade
MyWAP321 is dropping connections at least once a day since upgradiing to firmware 1.0.1.10. before the upgrade I had no problems and I have another WAP321 with firmware 1.0.0.3 that never drops connection. Is anybody else having this problem since upgrading?
Hi ,
Ive just installed this WAP 321 wiht Radius server authentication.
I have the firmware version 1.0.2.3 and this WAP is now having Connection dropout and dosent connect again.
I have to do re try for several times and again it starts working.
Please see the log and advice me what is happeing inside it and why this connection is not staying persistent with the associated wireless clients.
Jun 9 2013 20:07:25
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:36
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:36
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:35
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:35
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:17
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:17
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:16
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:16
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:56
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:56
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:53
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:53
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:22
info
hostapd[1241]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:59:22
info
hostapd[1241]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:59:22
info
hostapd[1241]
EAP authentication with the authentication server completed
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:59:21
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:21
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:20
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:20
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:18
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:18
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:57:27
info
hostapd[1106]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:57:27
info
hostapd[1106]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:57:27
info
hostapd[1106]
EAP authentication with the authentication server completed
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS -
RVS4000 since firmware upgrade no IAC
Hello, since upgrading to the latest firmware V2.0.3.4 I can no longer access the "Forbidden Domains" field in the Website Blocking by URL Address section of the page. The field is greyed out. Tried several web browsers I.E., firefox, chrome, safari...
Thanks in advance for any tips.A *#7370# format fixed the issue.
-
Nokia E52 email issue since firmware upgrade (031....
Hi guys,
Yesterday i successfully upgraded my E52 to latest firmware - 031.012. After upgrade i removed all previous email accounts (1 MFE, 1 pop and 1 imap) and start a new setup.
i have to mention, that i double checked that the email client version has updated to 2.1.0 (the old one was 2.0.5). There are also several visual changes during the email setup.
Now here is my issue: I recreated my exchange email account and it works perfectly, but when i try to add a second email account (Email->New), choose one of the providers from the list (Windows Live for example) and proceed here is what happens:
1. I get a promt to enter email address and password
2.Then "Validating settings" and "Downloading terms" progress bars start
3. After "Downloading terms" progress bar completes i am returned at the page where have to choose email provider again
Is there someone with similar issue as mine when has upgraded to 031.012? I hope someone will give me a clue how to fix it...
Thx in advance!
Regards,
EmilOn E52 or E72 (I haven't checked on other handsets), The problem occurs only if you try to add an account which is previously registered on Nokia Messaging Website http://email.nokia.com/ or has been added as an additional account within the Nokia Messaging Account.
Before adding/creating a new email account on E52 or E72, make sure the account has not been registered at Nokia Messaging Website or if it has been registered then make sure to delete those accounts before you add them in your phone newly.
You can delete account from Nokia Messaging Website by logging in with that account first on the website.
Remember that you have two ways to remove the account from Nokia Messaging Website.
1- If the account was used initially to signup on the website (actual Nokia Messaging Account) then you need to login with that account and Cancel the membership. It will delete all the additional accounts if you have added any.
2- If the account was added as an additional account in an existing Nokia Messaging Account, then again you would need to login with the Nokia Messaging Account and delete the account from the list as needed.
Note: If you are wandering that you never manually registered on the above website by visiting it on your computer, then keep in mind that the account is automatically registered on the website when you try to add or create the account on the Nokia Email Client on your phone. This could probably be the case that you would have registered once in the past via your Nokia Email client or directly on the Website. In either case you would need to remove the accounts from the Nokia Messaging.
I haven't read this any where but this is what I have got during fixing and finding the solution. I have created accounts on E52 (more than once after upgrading firmwares) very easily by following the above procedure. What ever it is, a bug? or an intentional reason, I don't know.
I hope it could fix your problems with the New Nokia Email client built-in with E52
Edit:-----
Note1: You would have to wait for a few minutes after removing the accounts from the Nokia Messaging Website, before trying to add in your phone.
Note2: First add the Ovi Mail Account(make sure you have it signed-up and configured on http://www.ovi.com/) in your phone and then add any of the other accounts later. -
Link problem since firmware upgrade
Hi,
Just upgraded to latest firmware on ix4-300d, link doesn't work anymore!!!
Any idea?
Thanks
Solved!
Go to Solution.Are you using the old Iomega Link or the new LenovoEMC Link? I would recommend downloading the LenovoEMC link if you haven't: LenovoEMC Link iOS and Android application
Have you enabled port forwarding on your router? You might need to. Check to make sure that the ports are forwarded correctly: Why can't I connect remotely to my Iomega device or Personal Cloud from my Iomega Link App?
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
PLOGI errors & warnings since firmware upgrade on Brocade Director 48000
Hi there,
I have a SFE25K with several domains. Some domains with Solaris 9 and others with Solaris 10. They have ISP2312 HBAs with firmware from 1.14.09 to 1.14.15, these are connected to a Director 4800 with the following version info:
Kernel: 2.4.19
Fabric OS: v5.1.0d
Made on: Tue Aug 8 18:35:50 2006
Flash: Thu Nov 23 23:17:35 2006
BootProm: 4.5.3
The firmware on the switch was recently upgraded without rebooting the switch.
/var/adm/messages on all domains record these messages every half hour:
Feb 15 13:23:39 myhost fp: [ID 517869 kern.info] NOTICE: fp(0): PLOGI to 610c13 failed state=Timeout, reason=Hardware Error
Feb 15 13:23:39 myhost fp: [ID 517869 kern.info] NOTICE: fp(0): PLOGI to 610c13 failed state=Timeout, reason=Hardware Error
Feb 15 13:23:39 myhost fctl: [ID 517869 kern.warning] WARNING: 184561=>fp(0)::PLOGI to 610c13 failed. state=c reason=1.
Feb 15 13:23:39 myhost fctl: [ID 517869 kern.warning] WARNING: 184561=>fp(0)::PLOGI to 610c13 failed. state=c reason=1.
Feb 15 13:53:39 myhost fp: [ID 517869 kern.info] NOTICE: fp(0): PLOGI to 610c13 failed state=Timeout, reason=Hardware Error
Feb 15 13:53:39 myhost fp: [ID 517869 kern.info] NOTICE: fp(0): PLOGI to 610c13 failed state=Timeout, reason=Hardware Error
Feb 15 13:53:39 myhost fctl: [ID 517869 kern.warning] WARNING: 184651=>fp(0)::PLOGI to 610c13 failed. state=c reason=1.
Feb 15 13:53:39 myhost fctl: [ID 517869 kern.warning] WARNING: 184651=>fp(0)::PLOGI to 610c13 failed. state=c reason=1.
In addition, every time we attach a new fiber from the hba to the switch in order to get new disk or tape devices, Solaris does not detect anything until a reconfiguration reboot (reboot -- -r). We tried cfgadm -c configure <dev>, luxadm -e forcelip <dev>, with not success.
Any advice would be appreciated.Use your service contract.
Open a support case with Sun.
http://www.sun.com/secure/contact/
These forums are not techsupport.
Don't trust the operation of such expensive enterprise class systems
to what some anonymous person tells you in a forum on the Internet.
The forums are for user-to-user discussions.
There is no guarantee on knowledge or experience levels.
(there are some extremely skilled contributors to these discussions,
but there are many novice contributors as well)
If you follow the advice on what someone says here,
and they are mistaken or incomplete in their advice...
You tell your employer: "But those people in the forum told me to do this ..."
Then you will need to go and re-write your resume.
Contact Sun.
Direct techsupport has accountability.
That is why you have that service contract.
With a SF25K in the building, you likely have
an assigned SSE on your account. They may even have
permanent residence in your building. Draw upon their skills and advice. -
I have upgraded my AppleTV 3 to firmware 6.0.2 for five weeks but always getting problem in Airplay my ipad2 and wired iMac to Apple TV3. Before that, the Apple TV3 in firmware 5.0 was fantastic in everything. Now, the all-time-sympton of my Apple TV3 waking up from sleep is:
1) iPad2 in IOS6..1.3 can't find any airplay icon, same as my new iPhone 5s
2) The wired iMac can't connect to AppleTV3 through Airplay, neither from Maverick's airplay icon nor from iTune's airplay icon.
3) Further than that, the home sharing from AppleTV3 is found to be disconnected from iTune in iMac
My port-scan towards ApplTV3 at this scenario is found all the Bonjour services are missing, including:
* Remote Audio Output (port 5000)
* _airplay (port 7000)
* _touch-able (port 3689)
* Sleep Proxy Server (port 57206)
* _appletv-v2 (port 3689)
My walk around at the moment is to restart AppleTV3, then all the Bonjour services come back and airplay, home sharing work again. However, this requires me to restart the box everytime I bring up the box from sleep. That means I have to turn on TV... quite fustrated.
I'm wondering if there is any similar problem encounted and any fix. Well, I can't find any formal description from Apple but their trouble-shooting document keeps saying to "restart Apple TV" as last resort.
Tks in advance!I finally found the like-symptom causing the issue of missing airplay services on ATV box.
Well, I have one airport express installed in my study room, which connects to the same LAN as ATV3 in living room. Today, I reset airport express to factory setting and reconfigured everything on AirportExpress, including its SSiD, wifi network key and device password. All of a sudden, my iPad, iPhone, iMac lost their airplay connection to ATV3. Port scanning found no airplay services on ATV3 box. It needed box restart to bring up airplay as my earlier walk around solution. I still performed reset -> restore for a "permanent fix".
That said we might have airplay icon disappeared again if there were more than one airplay device on the same LAN that would interfere to each other. Working on one airplay device from ground start would cause airplay service of another box malfunction.
My experience showed this twice. The first was happened when I put an airport express on the same LAN and I posted a thread here for help. The second was in this morning when i reset airport express to factory setting -
I recently bought an SPA 2102. Of course it is unlocked (I have full access to user and admin). The Software Version is 3.3.6. The Hardware Version is 1.2.5(a). Everything is working fine. I went to www.linksys.com to upgrade the firmware. I noticed that current firmware is 5.1.9 dated 04/03/2007. I was a little bit surprised with the huge gap between the current 3.3.6 in my SPA 2102 and the 5.1.9 posted on Linksys website as I bought my SPA 2102 a month ago. Nevertheless, I tried to update the firmware I provide the IP address for my SPA (the same one I use to gain access to the setting webpage). However I received a message “upgrade fail: No response from SPA”.
I have a feeling that my SPA is a SPA 2100 disguised in SPA 2102. When I went to SIPURA website, I found that the latest firmware for SPA 2100 is 3.3.6. The way I understand it is the SPA 2100 is phasing out and replaced by SPA 2102. I will be concerned that I will have a sort of a phased out device.
I called Linksys technical support and they were slightly above useless. The guy told me to contact my VoIP provider to upgrade the firmware. I told him I have no VoIP provider as the ATA is unlocked. He put me on hold for long time until the call got disconnected. Usually I don’t count on telephone technical support. Anyhow this is not the issue.
Here are my questions:
1) Did I miss something that prevented the upgrade of SPA 2102 to the 5.1.9 firmware? What settings I should look for to allow the firmware upgrade?
2) Should I upgrade my SPA 2102 to the 5.1.9 or I am considered part of the SPA 2100 family rather than the SPA 2102?
3) If I am actually an SPA 2100 in a SPA 2102 box, will I damage my hardware or make it functionless if I upgrade to 5.1.9?Krishna, this worked for me. I just connected my computer directly to the LAN/Ethernet port of the SPA-2102 and run the firmware upgrade executable file. I initially had the same problem since my computer was connected to the main router.
-
Firmware Upgrade Doesn't Recognize Pla
I'm trying to reload the firmware on my Zen Micro. It just stopped working for some reason. My computer recognizes the player and when I run Creative's Recovery Tool, it initially recognizes the player. However, when I run the firmware upgrade, the player is not recognized. I've done everything Creative suggests, including changing the registry permissions. I'm at a loss. Does anyone have any suggestions?
Ouch. You don't use preferences to point to a library on an external drive. I hope you didn't do anything with preferences. You use that to redirect iTunes to where you want to put just media which is only part of your library. The other part of your library is, uh, wherever you keep it.
If you really keep the whole library on an external, start iTunes and immediately hold down the option key, then point it to the iTunes folder on the external.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 -
Vision M - no connection with firmware upgrade with WMP
Now I know there's been a lot of fuss about WMP and firmware upgrades but I've got a problem with WMP0! If I connect my Vision M to the computer within seconds the Media Explorer page comes up and I'm away - success. If I run the firmware upgrade (ZENVision_PCFW_L6__42_0.exe) it comes up and says player is not connected. If I re-connect, Media Explorer pops up again and says player is connected but the firmware upgrade exe is still saying the player is not connected. It doesn't matter how many times I disconnect and reconnect, the upgrade program does not recognise the player! I checked WMP and that is version 0. So is this an earlier problem that someone's got an answer to I don't think I'll go to WMP! My Zen is version .40.02 and I'm trying to upgrade to .42.0. Please help?Glazza
Perhaps the player is faulty? Try to contact CS and see what they have to say:
http://us.creative.com/support/ -
Portege R400 - Firmware upgrade fails for 3G card
During the Firmwareupgrade of the embedded 3G Card(Expedite EU870D) in my Protege R400 I have a power fail. On next start I can't countinue with the upgrade. The Card don't work anymore.
The Modem and the COM Ports I can't see in the Device Manger. Is there a solution for that Mistake? Thanks for help!
PumbkinWhy you do the firmware update?
You should do this only if the Vodafone SIM card is not working properly!
I found this info which pop ups before running a firmware upgrade!
+Cautions in the FW Update:+
+Please be sure to read this carefully before upgrading the FW.+
+1. FW Upgrade is not needed when Vodafone SIM card is working properly under customers environment. Run the FW upgrade only when Vodafone SIM card is not detected. Please note that the FW is no longer revertible to the prior state once upgraded.+
+2. This upgrade tool is applicable for the following models with built-in 3G module:+
+ Portege R400+
+ Portege R500+
+ Tecra M9+
+3. Please exit 3G communication and close the Connection Utility before running the FW upgrade.+
+4. Close all the applications before running the FW upgrade. Please DO NOT launch any application during the upgrade process.+
+5. Please make sure to use an AC adaptor to power the computer during the FW upgrade process. Power failure during the upgrade process may lead to 3G modem failures.+
+6. Please DO NOT Suspend/Hibernation/Shut Down the computer during the FW upgrade process. Doing so may lead to 3G mode+
So please firstly these points before you would try to upgrade the firmware! -
G5 Firmware update necessary? Random problems since Tiger upgrade.
I have a PowerMac G5 (7,2) with a 1.8 GHz PowerPC 970 (2.2) CPU running under boot version 5.1.4f0. I have added memory.
I apparently upgraded from OS 9 to 10.2.8 without running any firmware updates. I quite frankly don't remember. I have since upgraded to Tiger, directly from 10.2.8. (There were OS X versions in between, I'm told. *wry smile*)
I am now having random problems.
The machine won't sleep. Display will but tower won't.
On occasion when I boot it up, I get the blue screen and nothing else; I have to shut it off with the power button and restart.
iPhoto (ancient version) is running agonizingly slowly (better since I did the fix suggested in the iPhoto forum in answer to someone else's question).
A short while ago, (in the last week) I noticed that some of my rules in mail ceased functioning (while others work fine). I deleted and recreated them to no avail. I previously had serious Mail problems that I fixed thanks to Mr. Gost, but those were largely of my own creation, so this latter might be unrelated.
If I'm reading things on the various boards and in Apple's Support forum right, in order to truly fix this I should deal with the firmware, to wit:
1. temporarily remove the memory I added (not factory-installed)
2. somehow (handwave) install OS 9 OR boot up from a OS 9 disk
3. download and install the 5.1.5f2 uniprocessor firmware update that Software Update keeps insisting I need.
4. reinstall the added memory
5. If I've reinstalled OS 9, reinstall 10.2.8 and then reinstall Tiger. (because I can't go directly from 9 to 10.4, right?) Otherwise, a clean install of Tiger might be a good idea.
Is this accurate?
Should this solve my blue screen and non-sleeping issues?
Are those issues indicative of a serious problem, or just annoying?
Is there more than one firmware update I should be using?
Will updating my firmware at this point create more issues than it is worth (as I'm seeing that many people had issues after firmware updates?)
Also, these problems seem to have intensified since the update to 4.10. Can I go back to 4... um... the last update? If so, can you point me to directions?
Sorry to be so verbose. I'm obviously more than a little behind the bell curve on this upgrade. The version of iPhoto I want (6) isn't even sold anymore.Software updater insists the firmware update I need is 5.1.5f2. The only information I can find on this is on a 2004 page at apple support (http://docs.info.apple.com/article.html?artnum=86117) that states:
These firmware updates cannot be installed when the computer is started up from Mac OS X. In order to install them, you must start up the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk (not from a CD).
When you click on the technical details it says:
Remove any third part RAM before installing this Firmware Update. After the Firmware Updater has verified that it has been completed correctly, you can re-install your third party RAM.
There are other firmware updates, but they don't appear to address the issues I have been having, and they're not what Software Updater says it needs. Am I missing something obvious here?
I will check the USB devices. Thank you. -
My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.
Etrecheck says:
Problem description:
Imac late 2009 running slow
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 4:33 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
Empty
BANK 1/DIMM0
Empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 5:5:56
Disk Information: ℹ️
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (308.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Western Digital My Book 111A 1 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
My Book (disk1s3) /Volumes/My Book : 1.00 TB (226.58 GB free)
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/hosts - Count: 30
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.roxio.TDIXController (1.7) [Click for support]
/Library/Application Support/LogMeIn/drivers
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) [Click for support]
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) [Click for support]
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Click for support]
[not loaded] com.novatelwireless.driver.3G (3.0.13) [Click for support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) [Click for support]
[not loaded] com.option.driver.Option72 (2.15.0) [Click for support]
[not loaded] com.option.driver.OptionHS (3.26.0) [Click for support]
[not loaded] com.option.driver.OptionMSD (1.21.0) [Click for support]
[not loaded] com.option.driver.OptionQC (1.11.0) [Click for support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) [Click for support]
[not loaded] com.vodafone.driver (3.0.9) [Click for support]
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) [Click for support]
[not loaded] com.zte.driver.cdc_usb_bus (1.0.1) [Click for support]
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) [Click for support]
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
/System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
[not loaded] de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (3.0.13) [Click for support]
/System/Library/Extensions/Vodafone.kext/Contents/Plugins
[not loaded] com.vodafone.driver.Data (3.0.9) [Click for support]
/Volumes/My Book/Extras/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
Startup Items: ℹ️
AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
Qmaster: Path: /Library/StartupItems/Qmaster
VirtualPCOSServices: Path: /Library/StartupItems/VirtualPCOSServices
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudphotosd.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.photolibraryd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[failed] com.apple.mtrecorder.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[failed] com.logmein.LMILaunchAgentFixer.plist [Click for support] [Click for details]
[running] com.logmein.logmeingui.plist [Click for support]
[running] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[running] de.novamedia.VodafoneDeviceObserver.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.bombich.ccc.plist [Click for support]
[running] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.logmein.raupdate.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Mail Application (/Applications/Mail.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
iAntiVirus Application Hidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.730 [Click for support]
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.730 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.730 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Adobe Version Cue CS3 [Click for support]
Adobe Version Cue CS4 [Click for support]
Déjà Vu [Click for support]
Flash Player [Click for support]
Growl [Click for support]
SixtyFourSwitcher [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 190.89 GB
Destinations:
My Book [Local]
Total size: 1.00 TB
Total number of backups: 13
Oldest backup: 2015-04-21 19:59:59 +0000
Last backup: 2015-05-02 19:49:37 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 190.89 GB X 3)
Top Processes by CPU: ℹ️
12% iavd
5% iAntiVirus
5% WindowServer
5% diskimages-helper
1% mdworker(5)
Top Processes by Memory: ℹ️
537 MB kernel_task
266 MB Google Chrome Helper(4)
111 MB Google Chrome
74 MB ocspd
74 MB WindowServer
Virtual Memory Information: ℹ️
1.45 GB Free RAM
2.55 GB Used RAM
59 MB Swap Used
Diagnostics Information: ℹ️
May 3, 2015, 11:26:23 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-05-03-112623_[ redacted].cpu_resource.diag [Click for details]
May 3, 2015, 11:22:17 AM Self test - passedThanks for all the replies.
I've now installed the ad blocker, thrown away the unwanted files, and thrown away a copy of Firefox that Adware said had a problematic extension.
Things are better, but still slow.
Activity Monitor shows that with just Mail, Chrome and Excel running, 2.9GB of my 4GB RAM is used. Opening InDesign (always slow) increase that to 3.2GB. But the graph stays green.
Console shows several potential problems but I don't know if any are significant. In any case I will call my Mac store tomorrow to ask their advice about RAM.
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3383189 oid:3383189 ino:3383189 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5 -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3375445 oid:3375445 ino:3375445 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages
04/05/2015 18:52:10.564 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:11.090 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:12.727 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:52:13.021 Mail[309]: XOAUTH2 requires user
04/05/2015 18:52:13.022 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:52:14.284 helpd[296]: Cannot find executable for CFBundle 0x7fb412caabe0 </Library/Documentation/Help/iWorkFunctionsHelp.help> (not loaded)
04/05/2015 18:52:15.085 helpd[296]: Cannot find executable for CFBundle 0x7fb412d1f540 </Library/Documentation/Help/X422MFPHelp.help> (not loaded)
04/05/2015 18:52:17.455 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:17.456 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.737 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.738 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:23.292 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:31.811 AddressBookManager[428]: Validate metadata timed out, cancelling
04/05/2015 18:52:33.395 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.396 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.467 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:33.573 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.574 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.922 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.923 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.068 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:34.068 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.354 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:35.161 icbaccountsd[430]: Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fe8584355d0 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
04/05/2015 18:52:35.597 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.598 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.612 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:35.613 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3111641 oid:3111641 ino:3111641 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3078032 oid:3078032 ino:3078032 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected] -- /Users/leopard/Library/Mail/V2/[email protected]
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3096791 oid:3096791 ino:3096791 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox -- /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3112877 oid:3112877 ino:3112877 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3105498 oid:3105498 ino:3105498 fsEvents:1 /Users/leopard/Library/Mail/V2/Mailboxes -- /Users/leopard/Library/Mail/V2/Mailboxes
04/05/2015 18:52:39.465 sandboxd[328]: ([430]) icbaccountsd(430) deny mach-lookup com.apple.CrashReporterSupportHelper
04/05/2015 18:52:42.205 com.apple.backupd[433]: Starting automatic backup
04/05/2015 18:52:43.308 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:50.022 com.apple.backupd[433]: Backing up to /dev/disk1s3: /Volumes/My Book/Backups.backupdb
04/05/2015 18:53:40.588 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: server returned error: 404 for URL http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3
04/05/2015 18:53:40.589 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: Failed to load announcements document: Error Domain=GEOErrorDomain Code=-601 "The operation couldn’t be completed. (GEOErrorDomain error -601.)" UserInfo=0x7fba42c4deb0 {NSErrorFailingURLStringKey=http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3, HTTP Status Code=404}
04/05/2015 18:53:40.989 com.apple.xpc.launchd[1]: (com.apple.quicklook[440]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:53:41.159 nbagent[439]: XPC Activity invoked with state=0
04/05/2015 18:53:41.160 nbagent[439]: XPC Activity invoked with state=2
04/05/2015 18:53:41.329 storeaccountd[317]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff9a8580770> connection from pid 439 with interface <AccountServiceInterface: 0x7ff9a8598880> (PID 439)
04/05/2015 18:53:41.739 periodic-wrapper[441]: Running daily periodic task.
04/05/2015 18:53:43.613 storeaccountd[317]: ADI: {
"Accept-Ranges" = bytes;
"Cache-Control" = "max-age=14400";
Connection = "Keep-Alive";
"Content-Encoding" = gzip;
"Content-Language" = "en-us";
"Content-Length" = 793;
"Content-Type" = "application/x-apple-plist";
Date = "Mon, 04 May 2015 17:53:43 GMT";
Etag = "\"e20-5071070ddab80\"";
Expires = "Mon, 04 May 2015 21:53:43 GMT";
"Keep-Alive" = "timeout=15, max=281";
"Last-Modified" = "Tue, 04 Nov 2014 23:01:18 GMT";
Server = Apache;
04/05/2015 18:53:44.006 sandboxd[328]: ([447]) nbstated(447) deny ipc-posix-shm-read-data com.apple.AppleDatabaseChanged
04/05/2015 18:53:58.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
04/05/2015 18:53:58.472 mdworker[366]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.474 mdworker[435]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[436]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[437]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.478 CoreServicesUIAgent[359]: unexpected message <OS_xpc_error: <error: 0x7fff76be0c60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff76be0f70> { length = 18, contents = "Connection invalid" }
}>
04/05/2015 18:53:58.478 mdworker[438]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.558 fseventsd[42]: Logging disabled completely for device:1: /Volumes/Recovery HD
04/05/2015 18:53:58.565 mds[55]: (Volume.Normal:2464) volume:0x7f96c413b000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
04/05/2015 18:53:58.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
04/05/2015 18:56:38.724 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:39.031 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:39.031 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:40.704 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:40.977 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:40.977 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:43.160 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:43.428 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:43.428 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:00.920 WindowServer[154]: CGXDisplayDidWakeNotification [729933074334]: posting kCGSDisplayDidWake
04/05/2015 18:57:00.920 WindowServer[154]: handle_will_sleep_auth_and_shield_windows: Deferring.
04/05/2015 18:57:01.086 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: notification observer: com.apple.iChat notification: __CFNotification 0x7fd522414040 {name = _NSDoNotDisturbDisabledNotification}
04/05/2015 18:57:01.235 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: NC Disabled: NO
04/05/2015 18:57:01.241 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: DND Enabled: NO
04/05/2015 18:57:01.242 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: Updating enabled: YES (Topics: (
04/05/2015 18:57:06.630 com.apple.backupd[433]: Will copy (547 KB) from Macintosh HD
04/05/2015 18:57:06.720 com.apple.backupd[433]: Found 14392 files (112.99 GB) needing backup
04/05/2015 18:57:06.728 com.apple.backupd[433]: 136.19 GB required (including padding), 118.1 GB available
04/05/2015 18:57:09.840 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:10.119 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:10.119 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:12.387 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:12.668 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:12.669 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.340 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:14.619 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:14.619 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.620 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-02-204937 containing 782.8 MB; 118.88 GB now available, 136.19 GB required
04/05/2015 18:57:22.106 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-03-181125 containing 31.6 MB; 118.92 GB now available, 136.19 GB required
04/05/2015 18:57:22.108 com.apple.backupd[433]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:57:22.281 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:22.562 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:22.562 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:47.959 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-25-125849 containing 2.94 GB; 121.86 GB now available, 136.19 GB required
04/05/2015 18:57:47.960 com.apple.backupd[433]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:01.552 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-26-110446 containing 6.31 GB; 128.17 GB now available, 136.19 GB required
04/05/2015 18:58:01.554 com.apple.backupd[433]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-27-095120 containing 110.88 GB; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted 5 backups containing 120.95 GB total; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Backup date range was shortened: oldest backup is now Apr 28, 2015
04/05/2015 18:59:01.076 com.apple.xpc.launchd[1]: (com.apple.quicklook[533]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:59:09.015 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:10.846 nsurlstoraged[308]: purgeEntireFileSystemStore - failed to rename the current cache dir /Users/leopard/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple. mail/fsCachedData to new cache dir /var/folders/wv/x9z7l4911p33dv8jyv6nby6m0000gn/T/fsCachedData_remove. Errno=18
04/05/2015 18:59:14.837 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:51.249 spindump[412]: Saved spin report for System Preferences version 14.0 (14.0) to /Library/Logs/DiagnosticReports/System Preferences_2015-05-04-185951_Paul-Breedens-imac-5.spin
04/05/2015 19:00:05.000 kernel[0]: process WindowServer[154] caught causing excessive wakeups. Observed wakeups rate (per sec): 157; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 66094
04/05/2015 19:00:05.871 com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Root[544]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
04/05/2015 19:00:05.875 SubmitDiagInfo[340]: Couldn't load config file from on-disk location. Falling back to default location. Reason: Won't serialize in _readDictionaryFromJSONData due to nil object
04/05/2015 19:00:11.473 spindump[412]: Saved wakeups_resource.diag report for WindowServer version ??? (???) to /Library/Logs/DiagnosticReports/WindowServer_2015-05-04-190011_Paul-Breedens-im ac-5.wakeups_resource.diag
04/05/2015 19:00:56.197 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 19:00:56.530 iconservicesd[59]: Failed to move temp file /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata.tmp to /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata with error: Error Domain=NSCocoaErrorDomain Code=516 "“B9FF2D6E-5D0C-1218-402C-B706F28B0A68.isdata.tmp” couldn’t be moved to “com.apple.iconservices.store” because an item with the same name already exists." UserInfo=0x7fb949c13070 {NSSourceFilePathErrorKey=/Library/Caches/com.apple.iconservices.store/B9FF2D6E -5D0C-1218-402C-B706F28B0A68.isdata.tmp, NSUserStringVariant=(
Move
), NSDestinationFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0 C-1218-402C-B706F28B0A68.isdata, NSFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C -B706F28B0A68.isdata.tmp, NSUnderlyingError=0x7fb949c11ba0 "The operation couldn’t be completed. File exists"}
04/05/2015 19:00:57.204 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.211 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.796 QuickLookSatellite[545]: CGSConnectionByID: 0 is not a valid connection ID.
04/05/2015 19:00:57.796 QuickLookSatellite[545]: Invalid Connection ID 0
04/05/2015 19:01:02.753 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.824 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:02.837 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.896 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:08.015 com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.7940DB53-496F-47D2-87E2-C3EE3CBF1E27[545]) Service exited due to signal: Killed: 9
04/05/2015 19:01:19.128 apsd[75]: Illegal subject name missing 'courier.push.apple.com' (2.5.4.3): ({
label = "2.5.4.6";
"localized label" = "2.5.4.6";
type = string;
value = US;
label = "2.5.4.8";
"localized label" = "2.5.4.8";
type = string;
value = California;
label = "2.5.4.7";
"localized label" = "2.5.4.7";
type = string;
value = Cupertino;
label = "2.5.4.10";
"localized label" = "2.5.4.10";
type = string;
value = "Apple Inc.";
label = "2.5.4.3";
"localized label" = "2.5.4.3";
type = string;
value = "courier.sandbox.push.apple.com";
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.3 instead of 10.10.3. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 0 CarbonCore 0x93ff9291 ___Gestalt_SystemVersion_block_invoke + 135
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 1 libdispatch.dylib 0x9a9460b5 dispatch_once_f + 251
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 2 libdispatch.dylib 0x9a9470d8 dispatch_once + 31
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 3 CarbonCore 0x93f7269d _Gestalt_SystemVersion + 1050
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 4 CarbonCore 0x93f717c0 Gestalt + 150
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 5 AdobeAFL 0x016ebfae _ZN5adobe3afl12MacFileUtils13AFileToFSSpecERKNS0_5AFileER6FSSpec + 5254
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 6 ??? 0x8feb70b3 0x0 + 2414571699
04/05/2015 19:01:28.908 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 19:01:28.952 Adobe InDesign CS5[550]: The function ‘CGSFlushWindow’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
04/05/2015 19:01:29.229 Mail[309]: XOAUTH2 requires user
04/05/2015 19:01:29.229 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
Hope this isn't too much ... thanks again for everyone's input.
Maybe you are looking for
-
Error while installing AIA FP 2.5
Hi, I am trying to install foundation pack 2.5 in windows 32 bit system. I downloaded the setup (V18466-01) from edelivery but whenever I am trying to run the setup.exe it is throwing an error that: "Unzip: No matching wildcard found for ..stage\Comp
-
How to make Outlook 2013 automatically download all emails?
I have four IMAP email accounts. Currently, my Outlook 2013 only shows new emails when I navigate to the folder they are in. For example, if I navigate to my work email inbox, it suddenly fills with new emails. Previously, in Outlook 2010, this would
-
Changes to logical database SDF
I want to add Network field in dynamic selections for FBL3. This field is part of table BSEG only. I have added that field to output of FBL3.
-
Standby Database with RMAN on ASM
Hi, I am using redhat Linux AS 4 and my database is 10.2.0.1. This database used ASM for storage of data files, control files, online redo logs. Flash recovery area is also configured in the ASM. I want to create a physical standby database on a diff
-
When on my home screen and I swipe the screen to the left I get a blank screen. I thought this might me a 2nd home screen, but I don't seam to be able to do anything to it. What it is ? Thanks N97 Firmware Version 20 Solved! Go to Solution.