Cooler XP doesn't recognize MSI M/B

I have an MSI KT4V M/B.Earlier I could use cooler XP.Then after i overclocked the CPU a bit, it started asking "MSI Mainboard?" when I clicked on "Cooler XP".But the temperatures continued to be shown.I replaced my M/B with a new one when it stopped working.But the problem persists.I even reinstalled the software but to no avail.What can be the problem?

have you tryed installing the older version???by the way try emailing them again!more the maryier,and another thing,did you look at the trouble shooting threads at the begining,they talk about the bogus readings of pc alert..msi should realy get there act together or people will flock to asus

Similar Messages

  • Cooler XP doesn't regonise MSI mainbord

    When I use PC Alert 4 version 4.0.5.0 and earlier versions
    and I want cooler XP to run, I get the message "MSI mainboard?". I have a KT3 Ultra-ARU MS-6380E.
    In the past the cooler XP function did work.
    I tried everything. Disabled the firewal and Anti-virus programs and installed it again, but still nothing.
    I mailed MSI 3 times over the last 5 months but no respons!

    have you tryed installing the older version???by the way try emailing them again!more the maryier,and another thing,did you look at the trouble shooting threads at the begining,they talk about the bogus readings of pc alert..msi should realy get there act together or people will flock to asus

  • [VIA] MSI KT6V BIOS doesn't recognize my Maxtor 160GB SATA HD

    I bought new Maxtor DiamondMax 160GB SATA 7200RPM harddisk (6L160M0). For being able to install Windows on the new harddisk, I used the SATA RAID driver (VT6420/VT8237) floppy, that came with the motherboard and everything went fine. Now I have installed Windows but BIOS doesn't recognize the new harddisk at all. When I check the properties of the harddisk in Windows the size is correct (~160GB). 
    System is working fine, but I don't dare to split the partition, before I'm positive it won't cause any problems.
    Should I flash BIOS, install new sata drivers or nothing?
    Motherboard MSI KT6V VIA KT600 chipset

    I understand what you mean, kalasilma, but a SATA drive is not recognized by the BIOS in the same way as a PATA drive. In fact, you aren´t going to see any drive information in the BIOS at all. The situation is the same in Win XP. You can see the HD in My Computer, but despite that, you can´t get information about the HD in device manager as you would with a PATA drive. The SATA interface is much more like a software type of interface than the much older PATA interface. It´s a little bit like the old days, when you had to manually configure a HD even in BIOS in order to have it properly recognized. With that in mind, the situation is much more satisfying, as the HD is visible and the size is correctly recognized at least in Windows 
    In a near future the situation is most likely going to be much better when it comes to BIOS recognizing SATA drives, but with these "beta" testing motherboards of ours, the only thing we can do is to be satisfied with our drives beeing recognized by Windows, using software drivers loaded at bootup. In fact your system wouldn´t be booting at all if the drive wasn´t recognized, since the drivers are loaded from the same HD. I think you can feel completly safe with the situation, since I have seen PATA drives beeing incorrectly recognized by Windows at installation. I had one 200GB HD that appeared as only 130GB no matter what I would do. I finaly partitined it and formatted the boot partition and installed Win. I used Partition Magic to locate and format the "lost" partiton under Windows. I think you are ready to go... 

  • Mac Pro doesn't recognize USB 3.0 PCI express card

    Mac Pro doesn't recognize USB 3.0 PCI express card.  Does it need specific drivers? 

    I did a little searching for that card.  The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac.  So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

  • TS1591 i just got an ihome system and had trouble with it connecting to my iPhone.  I finally got it to work and now my itunes doesn't recognize my phone.  My software is up to date on both my Mac and my iPhone and I have shut everything down and restarte

    i just got an ihome system and had trouble with it connecting to my iPhone.  I finally got it to work and now my itunes doesn't recognize my phone.  My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted.  Does anyone have any other suggestions?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • !!!!!I CAN'T OVERCLOCK MY CPU. BIOS DOESN'T RECOGNIZE MY AMD ATHLON XP-MOBILE

    My configuration is this:
    Mainboard: MSI K7N2-DELTA2-FSR
    CPU: AMD Athlon XP-Mobile 2500+ 1855MHZ
    Video Card: CAPTIVA Nvidia 6600GT 128MB 128bit
    Hard disk: Internal Maxtor DiamonMax 10 300GB S-ATA 16MB Buffer
    Audio Card: Sound Blaster Audigy Live 5.1 24bit
    Power Supply: 400WATT
    DVD drive: LG 16X
    SO I OVERCLOCK MY CPU UNTIL 3200+ (2200mhz), AND IF I WANT TO OVERCLOCK MORE DURING "POST", BIOS DOESN'T RECOGNIZE THE NEW VALUE (ES: FSB 200  / X11.5  = 2300mhz . DOESN'T RECOGNIZE).
    PLEASE HELP ME OR CAN YOU TELL ME HOW CAN I RESOLVE THIS PROBLEM???
    THANKS A LOT. BYE
     

    Quote from: Grayone on 06-February-06, 00:55:59
    Please furnish us some more info concerning the memory you are using and power output of the 3.3v - 5v -12v rails of your power supply along with the name of its manufacturer.
    Some mobile cpus start up with a lower multiplier and then go to the bios to use the preset settings in the bios.  If the cpu can't start with the bios settings, it remains at its start up values.  Your mobile may not be able to run at a multiplier of 11.5 with a 200fsb.  Drop its fsb back to 166 (stock fsb 133) and see if you can run it at its rated multiplier of 14.  That will equal 2324mhz.
    Overclocking is finding a balance between the fsb and the multiplier that allows you to get the most stable speed out of the cpu.
    You also have not mentioned what vcore voltage that you are using or the temps.
    The memory that I'm using are : V-Data 512x2 MB DDR CL 2,5
    The power supply is 400watt chassis, 3,3V, 12V, 5V.
    I tell you that with the mainboard ASUS I did't have this problem with the multiplier because I put 11.5 x 200Fsb.
    Thanks of all.MSI DriversMSI Drivers

  • Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

    I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0013AC2C0E8DEF50
    Current user is an administrator.
    The current local date and time is 2012-06-12 20:13:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Tue Jun 12 19:48:36 2012
    Lease Expires:       Wed Jun 13 07:48:36 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Well, you do not mention what computer OS you are using, so here are the support documents for both.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • ITunes doesn't recognize either of my iPods

    I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

    Hi Tanskalinen,
    If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

    After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
    THis also happened with my old iphone 4s
    I need help!

    Hi loist,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • Tecra M4 - DVD drive doesn't recognize any disk under Vista

    Hi,
    after the installation of Vista my dvd drive doesn't recognize any disks !
    No upgrade from XP! It was a clean Vista installation.
    I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
    I tested the drive under XP it works fine and recognizes everything.
    Drivers are correctly installed no problems in the device manager is prompted.
    So i have no idea how to get it working, seems to be a Vista problem
    Could any one help me ? I'm really frustrated about this
    Thanks for your help

    Maybe this helps:
    - Remove the CD/DVD drive from the device manager.
    - Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    - Then reboot the notebook
    But what happens exactly? What disks are not recognized?

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • This Question is at least 2.5 years old.  But still an issue.  I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

Maybe you are looking for