CoolerMaster Quick Fire TK NOT detected when directly plugged in.

Hardware
Keyboard : http://www.cmstorm.com/en/products/keyb … ickfiretk/
lspci : https://gist.github.com/CommanderAlchemy/6853973
lsusb: https://gist.github.com/CommanderAlchemy/6853979 (Bus 004 Device 101: ID 2516:0014  is the keyboard)
Issue
I have an issue where if the keyboard is connected directly to my PC by USB it wont get detected all the time. Sometimes it will detect it for 10+ boots and then it will suddenly stop and wont detect it at all on any of my 16 USB ports for unknown time.
Only life i get is
[ 928.475672] usb 8-2: new full-speed USB device number 14 using ohci-pci
[ 946.116238] usb 8-2: new full-speed USB device number 44 using ohci-pci
Then few minutes later it got detected when not even touching the keyboard or computer. (not always)
I tried connecting it to my laptop and it works each and every time. Detects it instantly.
Then I tried to connect CoolerMaster keyboard to my previous Logitech G15 keyboard by using it's ports and it worked flawlessly each time. Now instead of having 2 keyboards on my desktop I have a Intel USB HUB and it detects the keyboard.
[ 982.717841] usb 4-1.1: new full-speed USB device number 101 using ehci-pci
[ 982.805007] input: CM Storm Quickfire TKL Nkeys as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input18
[ 982.805421] hid-generic 0003:2516:0014.000C: input,hidraw2: USB HID v1.10 Keyboard [CM Storm Quickfire TKL Nkeys] on usb-0000:00:13.2-1.1/input0
[ 987.821264] input: CM Storm Quickfire TKL Nkeys as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input19
[ 987.821656] hid-generic 0003:2516:0014.000D: input,hidraw3: USB HID v1.10 Keyboard [CM Storm Quickfire TKL Nkeys] on usb-0000:00:13.2-1.1/input1
Looking at it I noticed just recently, ohci-pci when directly and ehci-pci when through a hub. Not sure what it used when it worked directly.
But any ideas why this happens?
Best Regards
Commander (Justice #archlinux)
Last edited by Commander (2013-10-06 13:23:19)

This is not solved but I mostly used to having a hub.
But i noticed that using different modes the keyboard behaves differently (obviously) however none of them behave the correct way.
kbd_mode -a (XLATE)
TTY switching works with ALT + F capslock/numlock LED's work partially*. And scrollock LED wont work.
* (Toggling numlock when capslock is enabled will turn of the LED for some reason)
And some keys are not mapped correctly (del arrows etc)
kbd_mode -u (Unicecode)
Same as above.
kbd_mode -s (RAW)
TTY switching does not work. capslock/scrolllock LED's wont work and wrong keyboard layout for del arrows etc.
kbd_mode -k (MediumRaw)
same as above
By default running showkey --scancodes in graphical mode returns
kb mode was ?UNKNOWN?
With this the layout where other modes fail is correct But switching TTY's wont work and LED's for capslock and scrollock wont work.
Any ideas how to proceed here?
Last edited by Commander (2013-10-24 09:38:59)

Similar Messages

  • I get the message Ipod detected but could not identify when i plugged in my new 7th gen Nano. Tried troubleshooting steps with no luck. Tried plugging in my old iPod and i get the same message.

    I get the message "Ipod detected but could not identify"when I plugged in my new 7th gen nano. Tried troubleshooting steps with no luck, Treid plugging in my old iPod that worked fine and I get the same message.

    Tried troubleshooting steps with no luck
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • X-fi fatal1ty device not detected when running speaker selection wizard

    Gx-fi fatalty device not detected when running speaker selection wizard? ?
    System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
    Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
    Origional CD fails to detect the card, claiming a supported device is not present.
    This card has worked prevously, and is verified as fully functional in windows Vista. ?
    Please note Windows Vista can not be used.
    I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
    Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
    I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
    does anyone hav a sugestion that is not already posted on this forum.

    Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
    I'm guessing that the card is pretty much toasted eh?
    --Jakk

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • My iphone text tone is not working when I plug in the earphone.

    Hi,
    My iphone text tone is not working when I plug in the earphone.
    My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
    As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
    Anyone pls help.. the problem still there even I updated..

    goh steven wrote:
    hi wjosten
    I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
    The iPhone is working exactly as it is designed.
    Your options are:
    1) Unplug the headset.
    2) Leave the headset plugged in and the earpiece in your ear at all times.
    3) Turn on vibrate and put the phone in your pocket.
    4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
    This is a user to user forum, these are the only solutions we can offer you here.

  • Battery icon dose not showing when i plug in to usb or power

    battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

    I would try another cable or try the cable in another ios device
    to verify if the cable was broken or your iphones connector is

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

  • ITunes does not start when iPhone plugs in

    my itune does not start when I plug my iphone or ipad in , this stater with lion install

    Please see here if it helps:
    https://discussions.apple.com/message/15705708#15705708
    Regards, Michael

  • Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Have you checker the connectors on both the transmitter and Nano for any signs of damaged, corroded pins?  It might help to take a can of compressed air to each.  The error message may be simply a result of the iPod Nano not getting a full connection with the transmitter at first.
    B-rock

  • I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    10. Reset the NVRAM.
    11. Reset the SMC.
    12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    13. Make a "Genius" appointment at an Apple Store.

  • I have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in?

    i have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in? Is it broken or do I need to download something to make it work?

    System Requirements
    MacBook Pro with Retina display
    MacBook Air computer
    Mac mini computer

  • Built-In Mic not working when Headphones plugged in?

    I'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.
    Does anyone have a solution to this?

    Use headphones that also have a microphone.

Maybe you are looking for