Cooling fan is not working

the CPU cooling fan of my new notebook is not working and i would like to ask where is the HP repair centre in Sottland?
The model is Pavilion g4-2316TX

Hi:
See here --
http://www8.hp.com/in/en/support-drivers/contact-centers/commercial/south.html#Hyderabad
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

  • Cooling fan is not working on Satellite Pro A300

    Hi Everyone
    I was asked by a friend to repair their Satellite Pro A300, as their CPU Cooling Fan had stopped working even during POST bootup and the laptop would overheat and shutdown. So I thought it could one of three things:
    # Fan is clogged with dust or dirt
    # Fan bearing has failed
    # Fan power cable was loose
    So I disassembled the laptop and cleaned the fan/heatsink using compressed air and checked the power connection which was solid, but this did not solve the problem, so I replaced the fan and heatsink with another one that I knew worked from the same model laptop that had a fault motherboard because of the random bios boot-up password bug (out of warranty) but still no joy.
    I am beginning to believe that the fan was perfectly fine rather the motherboards cpu temperature sensor(s) that control the fan activation has failed.
    Am I correct, in thinking that this is basically, irreparable without specialised tools and my friend will have content themselves with turning the system off every hourish or is there something else I am overlooking?
    Thank you, for any help.

    Hello
    Im not a technician but for me it sounds like that fan connector is malfunctioning if you have already replaced the fan and therefore it would be necessary to replace the mainboard
    Thats everything what I can say about this Have a look for second mainboard or notebook where you can get a cheap mainboard. Maybe it works. :)

  • I have a hp mini and a cooling fan is not working

    I have a hp mini and a cooling fan is nat working wat can I do ?

    Hi pamezcuar,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a problem with your TouchScreen and I will be happy to help. It almost sounds like it was going through a tutorial or configuration. To be able to assist you I will need to know what operating system you are running and the product number for your Ultrabook.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Cooling fan code not working (902)

    I caqnt get it to start up because it says theres a problem with the cooling fan

    Hi
    Please find the link given below might help you to resolve your issue. Incase if this does not help then you need to call HP Technical support check the warranty and get the part replaced.
    Error "Cooling Fan (902)" Appears when the Notebook is Powered On
    Reducing Heat Inside the PC
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Cooling fan is not working - How to disasemble Satellite L850

    How do you strip a Satellite L850 so as to get to the cooling fan and replace it. The cooling fan became noisy then stopped working and now the laptop is shutting down as it gets too hot.
    It is out of Warranty now as well.

    Hi
    Cooling fan replacement is pretty complicated procedure. Whole notebook must be disassembled and, as you probably know, it should be done by authorized personal only.
    Fact is that notebook disassembling procedure must be done by specific order to avoid some damage. Many plastic parts have small plastic holders and if you dont know how to remove certain part can be broken. The whole disassembling procedure is described in maintenance manuals but this document is not a public document and cannot be downloaded.
    What to say at this point? You can try to disassemble your machine but you will do this on your own risk. If you dont have experience with this I think it is not so good idea.
    Do you know someone who can help you with this?

  • Xserve cooling fan's not working properly?

    I have a slight problem with my XServe, it's an older PowerPC G4 (Dual 1.0Ghz) with 1.5GB RAM (3x 512MB).
    The fan's make a lot of noice, and I don't mean just the "normal" noice you'd hear from the fan's but more a sound as if the fan's can't run properly.
    according to Server Monitor, the fan's do run at quite regular speeds.
    the machine only has the options for one extra 512MB RAM module and one extra HDD, further it's "as good as it gets" for this model.
    I have the additional 512MB RAM module and I intended to put it in today, I noticed the noice when I started the machine as a test to make sure everything was OK before installing the additional 512MB, but it seems, it's not OK.
    I got the machine (for free! ^_^) a while ago with some spare parts (basically, two Apple Care part kits, but without the HD's) which included two cooling fan's, so I can replace them.
    that is, I could, if I'd know how....
    I wonder though, if there really is something wrong, or that the sound is just because the system hasn't ran for a while.
    it has been standing still for a few month I think, so it could be the fan's just need to "run in" a bit.
    the sound also it not very much standing out, yet it is quite easy to hear there is some sound there which shouldn't be.

    I had one of these units. It was a great machine but it was LOUD. The reason behind this was that the fans basically had one speed... FAST AND LOUD.
    The latter units had variable speed fans and were a little more quieter.
    It bothered me so much that I rigged the unit so the fans would only run at half the speed. It was useless though as the machine got pretty hot. Maybe if it was in an a/c data center it would be different.

  • Cooling Fan is not working properly

    I have taken this laptop around one and half year back.iam getting cooling fan exception while starting the windows.Please tell me the solution.

    Sometimes it is simply dirt,dust,pet hair,etc clogging the fan. Pick up a can of compressed air and blow out all of the vents, ports &  other openings. Clean it really thoroughly, then check to see if any change before resorting to changing the fan.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Upgraded RAM and now Fan is not working.

    I have upgraded my RAM to 2GB. (using video guide) Everything appeared OK, but the mac mini was overheating and shutting down after 10 - 15 minutes. It appears that the cooling fan is not working, as far as I can tell. I have checked and cannot find any loose cables, I have tried powering up with and without the fan control cable connected (next to the battery at front of mac).
    I have tried the hardware test but this is OK. I have tried some software downloads for monitoring the fan speed, but these appear not to work.
    Is there a cable or connect that I should be looking at? DVD, sound and all else seems OK. The memory passes all ram tests.

    I think you are referring to the fan control lead, which attaches at the front of the PCB near the battery. Is this the case? I have read that this only controls the speed so you don't have to attach the cable, in fact it suggests that if you leave this disconnected the fan should run at full speed.
    This is the only cable that I needed to disconnect, and have tried with it attached and disconnected, with the same issue. I am thinking that the fan is dead, or is being stopped by the magnetic tiles, I guess these are used to create a magnetic field that forces the blades to spin, so I guess if one of these has come away from the unit then it may not work. I can see that I can get a replacement fan for about $29.
    Can anyone confirm that these magnetic tiles are integral to the working of the fan?

  • Cooling fan is not operating correctly

    hello,
    my cooling fan is not working .and a massage showing as i start laptop and after showing massage ,laptop shut down in few second. please tell me what should i do.

    Hi
    Would you please advise which platform you are using? I suggest upgrade BIOS to see if it works, thanks.
    I am an HP employee.
    The opinions expressed here are the personal opinions of me, not of HP.
    Kudos are appreciated if I have helped you.

  • Fan is not working well of a pavilion g6

    when starting up my laptop, it reports that my fan is not working well and when it remains on for about 10minutes it starts to be hot at the position where the fan is located. the problem just started.

    Hello
    could you sense the fan is running by hearing and hot air blow out from air vent?
    1) if fan is running and running faster when hot, it means fan is working. please check if anything block the air vent or air intake. only Air can flow freely, it can cooling down the CPU.
    2) If Fan is running and air vent is not block and unit is been used long time, maybe the dust. if you have skill, please clean dust, it need remove some cover to disclose fan/heatsink.
    3) update BIOS to latest. of course Fan need to replaced if it is not run, but the running Fan usually don't need to be replaced.
    I work for HP.
    If you like my reply, please click "Kudos"

  • HP Elitebook 8470p - from battery the fan is not working

    Hello Everybody elitebook Expert!
    My laptop config in short: i5-3320m 2.60GHz with integrated graphics Intel HD4000, 4GB Ram.
    I don't like the elitebook 8470p cooling system and i can't see the normal reason of the machanism.
    So, there is no problem when the laptop is on AC power, the fan is on and works well and this is ok.
    But, i have problem when the laptop is on Battery because when the laptop is in idle mode the fan is not working but stay.
    Only  starts then just when it attains the 55 degrees.  This is not good, moreover it is bad for me, i dont like it because it is warm.
    I want the ventilator to work so when the machine is on AC power everytime on Battery too.
    In the BIOS there is no option for that and i can't see why...
    Plase help me! I need a program what can turn on the fan when the laptop is on battery or a tweaker or something else i don't know what but i need something.
    Aida64 says: motherboard name is: HP 179B
                              BIOS type is: Compaq EFI
                              BIOS version: 68ICF Ver.F.32            Date: 2012/05/12
    (I know that there is a newer BIOS but i don't think so that there is an option in the new that can handle the fan on battery mode).
    (Sorry for my English please).
    Ákos

    Thanks for the question Akos,
    I understand that CPU FAN does not work on battery mode in windows mode however it works in BIOS mode.
    firstly, as you know BIOS has control over CPU fan and CPU thermal table - however OS has better thermal managements. once PC is up, BIOS information and thermal control is handles by OS. to trigger a change it has to be still routed through firmware only however instructions are based on the BIOS thermal table and windows power management.
    we know the thermal management of windows is better than BIOS and best to provide you best battery performance. so in BIOS CPU fan may be not mostly spinning all the time but in windows its more effective.
    one example for the same is, when you update BIOS on your PC or we-write a BIOS - CPU FAn will be running at full RPM during the process because windows does not control the CPU fan at that time due to update/change process.
    its completely normal that you see most of the time CPU FAN is off or spins for a very minimal time. if its always off that means there is something wrong, however if its seen off on battery in windows - its ok. i do not think there is anything wrong here.
    if you want to have the FAN run always, that means you need to run your PC at a poor/bad thermal table. which i do not think possible with windows 8 platform because its largely looks like a mobile focused(better battery run time) platform.
    you may try installing any of the older (prefer non-windows OS) to check. however its not recommended. because it may result in a damage to hardware too (if a non-supported OS used).
    Hope this helps... Good Luck !!!!!
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • My hp laptop's fan is not working

    I have an HP Pavilion g6-1145sg. It was working properly all morning, and then I put it to sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and said something along the lines of
    "the system has detected that a cooling fan is not operating correctly. Continued operation would not be recommended at this time... may cause unpredictable behaviour that could result in random shut down, data loss or possible system damage." 
    Then after a few seconds it shuts off completely. There is an option to continue with system resume, and I clicked it once, but it didn't go all the way through to letting me use my laptop properly (I got to my desktop background and it shut down). 
    This has never happened before, and I have never had any problems with my laptop such as this before. I have had it since last August, and it has worked somewhat alright through until today. Of course, the system lags occasionally, but nothing serious, mostly just aggravating. 
    How can I fix this?

    Hi Shwetasonali,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1145sg Notebook and fan issues. Here is a link to overheating as this might be the cause of the shutting down. If the Notebook has dust on the fans it could be overheating the graphics card. If that does not help at the end of this document it shows you to do a hardware test. The final thing you should try is to update the BIOS.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My laptop says fan is not working but seems to be working fine!!

    Hi, 
    My laptop (HP, pavalion dv6) gives me the 90B error which says that the system has detected a cooling fan is not operating correctly. It says that If I press enter  I can continue into the windows but it may cause damage to my laptop. otherwise it automatically turns off after 15 seconds. 
    The strange thing is that this error doesn't pop up every time i turn on my lapton and I have been using my latptop for months now even when the error shows up and using the fanspeed software my cpu temperature is around 38 celesius when idle. (which seems to be normal) 
    I had the fan changed yesterday and all the vents cleaned out, still every once in a while the error comes up upon starting. 
    I also tried the hard reset trick but it didn't help.
    So can anyone please help? Shoul I be worried or keep working with my laptop despite the error? Do u have any suggestions on how to fix it?

    Help us to help you by posting the following information. 1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number. 2.  The complete version and name of the operating system you are using ( ie Windows 7 64bit ). If your notebook is from the model year 2012 and has UEFI PC Diagnostics, then there is a minimal risk with a BIOS update. You should also be able to safely update the BIOS by running an HP Support Assistant tuneup to see if there is an available update. Download the BIOS update via the HP Support Assistant if there is one available and perform the update.  Make certain that the power adapter is plugged in when you do this and do not remove power until the flash is complete! 

  • HSTNN-E06C - Fan is not working, need a replacement.

    Hello.
    I have a HSTNN-E06C laptop. It seems that my CPU fan does not work anymore.
    Before I got my  laptop  disassembled, I would like to prepare myself  with proper   components. I would like to ask You what is the  FAN product code, so I will be able to order a fan replacement?
    can you also provide me some  service manual, which will help me to take the laptop apart in proper  order.
    Fan replacement should not  be any problem for me, so I really   count on you, guys
    Thanks in advance.
    This question was solved.
    View Solution.

    If it is the fan that is you're having problem with, you can replace it. HP doesn't provide cooling fan alone as spare part.
    You might want to contact the online sellers mentioned above or your local stores with the part number & ask about it.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Cooling fan is not operating properly.

    I am using hp pavilion dv6 3123 tx with windows 7 ultimate os installed. I recently updated the bios via hp support assistant  and i don't know whether the bios is updated or not and after two  days ,I got a message while booting the system that the cooling fan is  not operating properly and it also shows the error message code (90b). Is it safe to use the laptop with a external cooler pad and my laptop is not getting heated too much while using with the cooler pad but before updating the bios too my laptop used to get overheated and it took time to boot. Before updating too i got blank screen while booting up and while playing games it  hung too.
    I don't know the error message occured was due to updation of bios or not and i also need to know can i use my laptop for final year project work with external cooler pad.can i give my laptop for service.

    Hi
    Please find the link given below might help you to resolve your issue. In case the issue still persits kindly request you to call HP Technical support check the warranty and get the Fan replaced.
    Reducing Heat Inside the PC
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for

  • SQ00 Restrict Access By User Group

    Hi all, I've just created a BOM Overview Report (Query) in SQ00 by using a logical database. I've assigned user's to the User group for the Z_BOM info set to run the report.    In Production client nobody has permissions to run SQ00 at this time. My

  • Persistent "cannot find symbol" error

    Hello, I'm trying to compile two classes, Customer.java and TestBanking.java (The third class in the common directory is Account.class, which compiled fine) The problem is that Customer.java uses Account.class, and TestBanking.java uses both Account

  • Same pc, replacement motherboard installed, won't accept activation

    Hi all, I have adobe installed on my main desktop and a laptop. The desktop recently went for repair and came back with a replacement motherboard (exactly same make/model etc) but now adobe won't accept the activation. I had assumed that after roughl

  • CSCur37347 - CSM 4.6sp1 find usage shows "Unable to display any data"

    Is there any solution for this issue at the moment? The suggested workaround (Recreate the CSM index using CSM Client > Tools > Cisco Security Manger - Administration > Customize Desktop > Recreate Index.) helps for a few minutes. 

  • How to export HD to iPod format from FCP?

    I have a 1080i timeline and am trying export using the iPod export..but instead of scaling it down to 320x180 (16:9) it scales it to 320x240 (4:3) filling the whole screen. Is there a setting or something I am missing? Is anyone exporting from FCP in