Cooling System Error

I have a Toshiba NB305-N442BL. I keep getting an error message that says there is a cooling system error and that I need to turn the computer off and return it for service. Some quick internet research shows that Toshiba has had a history of this exact problem (I've seen other people's screenshots of the exact error message I get), but I can't find a solution for my model. What should I do?

You can seek service by calling customer support at (800) 457-7777.
- Peter

Similar Messages

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Cooling Fan Error Message & Computer Shut Down

Hello,
I have a 2 1/2 Satellite running W7 and recently started having a problem, receiving a Cooling System error message which tells me to shut down the computer immediately. I did and left it off to cool, then started it up again. Less than 5 minutes later, same message and the computer shut itself down. The fan starts normally, then becomes burdened, then stops. Is this actually fan related or hard drive related?

Hello Peter,
I already have the new BIOS you sent me. The problem persists. Toshiba has no Authorized Service for computers where I live (Brazil) as far as I can see on their site, which I can't understand since it is a global company. So, I can not use my business computer now. Apparently, I either have to ship it to the States (which will cost me more than the computer is worth, and I'm better off buying a new one of a brand that takes care of its customers globally), or I have to try and find someone here who thinks they might be able to discover the problem and fix it. Any suggestions?

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

LCD 100 PRO 40N error "Check Cooling System"

At our school, we have a Cisco LCD 100 PRO 40N that now shows a message on the screen that states "Check Cooling System". I have not been able to find any information or documentation on how to do this or how to clear the message. This message is coming for the LCD, not from the DMP it is connected to. Does anyone have any information that might help?

Hello James,
"Check Cooling System" message is displayed on the screen when there is an issue with the cooling fan. Couple of things you can do proactively are check for ventilation issues on the back of the LCD screen. Switch it off for around 5-10 minutes and turn it back on. If the issue persists, open a Cisco TAC case to get an RMA.
Thanks,
Sagar Dhanrale

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

Qosmio G20 - Cooling warning/error

Ok so i have not yet had any problems with cooling, and now today when I just booted up i got this message;
"System warning
Warning: A problem with the cooling system has been detected.
Please turn it off immediately and return it for service."
A soft humming sound was coming from the bottom left part of my computer, about where the DVD drive is [there is no disc in the drive]
I then reset the computer and did not again receive the message, but the soft humming was still there.
Is it possible to access this fan easily at all? it probably just needs a clean.
I REALLY do not want to have to send it away as i use this computer ALOT and there is no telling how long the service may take.

Hello,
This Series of Computer (Qosmio) is pretty nifty in the fact that it will let you know if a fan is not working correctly. If this error pops up chances are one of the fans is either stopped up and can not spin or is not spinning as fast as it should, or a fan is broken. The humming could be that the fan is starting to malfunction and because of this does not spin normally, causing the hum and the error. I would take it to your ASP and have them run RPM tests of the fan (should hit an upwards of 7500 RPMs in high mode if I remember correctly)If it is going bad they can replace it and the computer should work normally again. Have a nice weekend.

IBook G4 'Cooling system' broken - any advice??

My iBook G4's cooling system/fan does not seem to work anymore. It reaches up to 64 degrees(F). Any help/advice please. Could I have switched it off accidently when I changed my screen saver/sleep timers??
Any advice welcome.
Thanks,
Chris.

Welcome to Apple Discussions!
You might try running the Apple Hardware Test. It should show up an error code if the fan has failed.
Good luck!

Satellite 5200-903: cooling problem error message

few minutes after booting my Satellite 5200-903 (xp home sp1)an error message apears: "Problem with the cooling system, shut down your system and send it to the service" (it's a free translation from German..) I installed a temperature checking tool, the software shows cpu temperature of about 60C, however I do not hear the fan..
Can someone help?

Hi
You have a good chance that it's only a cooling module.
Generally such warning message appears because the CPU cooling module cannot cool the CPU properly or it doesn't work.
However, the best way is to contact the Toshiba service partner in your country. Ask the guys for the opinion and I'm sure you will get a proper answer.
Good luck

L675 cooling system problem

Have gotten popup cooling system problem turn off computer and service twice now
2 months ago turn it off went away. Again the other day kept popping up even after restart but next
day and since no sign of it pc monitor looks fine CPU temp and fan speed. Seemed to popup when
CPU temp showed 49% pop up then fan would start. Good for a while then the same.
No dust around fan or heatsink. Could a bios up date fix checked there is one foe my system, or does anyone have another fix?
Solved!
Go to Solution.

Are you still having the overheating pop-up? I have been receiving the same annoying error for the past 3 weeks (model L675 S7049). Seeing that I am vigilant about not blocking vents and have inspected and cleaned cooling fins and fan blades, I suspect other issues...heat sensor problem, etc. I did break down today and upgraded to BIOS vers 1.7, up from 1.3. There was a mention of a fan error under ver 1.4 don't know this in anyway is related, but worth a try.

A problem with your cooling system has been detected.

I just started getting an error message saying my cooling system is not working and I need to shut down my computer immediately. I have a Toshiba Satellite S855-S5382 (part no. PSKFWU-002002)
This message just began showing up a day ago, the same day I upgraded from Windows 8 to the 8.1 update. The laptop does get very hot fairly quickly.
Don't know if it's remotely related, but I also get an error when trying to open certain programs that the Msvcp90.dll file is Not Found.
I just got the laptop on May of 2013, and have had a few problems with it so far but this is the first with the cooling system.

Hi When's the last time you cleaned the air vents??
Do not down load any thing from this link, just read how to clean your vents.
Dokie!http://www.mikescomputerinfo.com/cleanlaptop.htm
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

'System Error' status at Message Monitoring( HTTP to FILE )

I have created a scenario HTTP to FTP. I sent message to XI server using the HTTP Client.
After sending the message I am getting the response at browser.
Result:
http-Status: 200 Message accepted
Payload:
But when I look in to the Message monitoring at RWB, I am getting the message status as
System error. while going to the details i can see below error category.
Error Category MAPPING
Error Code EXCEPTION_DURING_EXECUTE
(Is the password different for port 50000 and 8000)
Please help me to solve this issue.
Thanks in Advance,
John

This is the trace message that I got for this error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46)</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>

Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

Dear All,
I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
CALL FUNCTION wa_funcnm
   EXPORTING
     /1bcdwb/docparams = fp_docparams
     invoice                     = invoice
   IMPORTING
     /1bcdwb/formoutput = fp_formoutput
   EXCEPTIONS
     usage_error        = 1
     system_error       = 2
     internal_error     = 3
     OTHERS             = 4.
The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
Regards,
Tushar.

Hi Tushar
You need to the following parameters when calling FM. Background WF process cannot handle dailog.
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf   = 'X'.
Refer to Thread below
Creating Attachments to Work Items or to User Decisions in Workflows
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
i_name     = l_formname
    IMPORTING
e_funcname = l_fm_name.
*   E_INTERFACE_TYPE           =
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf   = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel          = 1
usage_error     = 2
      system_error    = 3
internal_error = 4
OTHERS          = 5.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.
fp_docparams-langu = 'X'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION l_fm_name
    EXPORTING
/1bcdwb/docparams = fp_docparams
emp_info           = fs_per_info
    IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error        = 1
      system_error       = 2
internal_error     = 3
OTHERS             = 4.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.                               " IF sy-subrc <> 0
CALL FUNCTION 'FP_JOB_CLOSE'
*   IMPORTING
* E_RESULT             = result
   EXCEPTIONS
usage_error          = 1
system_error         = 2
internal_error       = 3
OTHERS               = 4
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.                               " IF sy-subrc <> 0.
ENDFORM.                    " GET_FUNCTION_MODULE
*& Form CONVERT_PDF_BINARY
FORM CONVERT_PDF_BINARY .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
BUFFER                = FP_FORMOUTPUT-pdf
*   APPEND_TO_TABLE       = ' '
* IMPORTING
* OUTPUT_LENGTH         =
    TABLES
BINARY_TAB            = t_att_content_hex .
ENDFORM.                    " CONVERT_PDF_BINARY
Regards
Sandy

How to fix file system error 56635 in windows 8.1

heelo pls help me to fix this problem i cant install any on my laptop.
file system error 56635 is showing up wen i install my kaspersky 2015

Hello Jay,
The current forum is for developers. I'd suggest asking non-programming questions on the
Office 2013 and Office 365 ProPlus - IT Pro General Discussions forum instead.

System error in Funds Management update

Dear you,
Have anyone seen the following when updating FM from FI document:
"System error:Funds management update (FMRI, CHECK_WE_RE)"
Any ideas what to do?
Thanks
Sonja

Hi there,
The update problem occurs both if we try to post with FB50L or if I try to make a transfer of FI postings in FM. This all happens in the new installation where we plan to use new GL and FM.
This note you gave did not ring a bell for me
The error message is FI057. But we have not yet found a suitable note.
Therefore any ideas are still welcomed.

Cooling System Error

Similar Messages

Maybe you are looking for