Cooling

I am receiving a message (detected a problem with the cooling system) anyone else receive this message and knows what is wrong.Fan is running,however not at full speed?

In my case the fan was part of the cooling module so the shop replaced the whole thing. I don't think the fan was even available as a separate part so it made sense to replace the whole unit. I would expect that configuration to be used on many if not all of Toshiba's notebooks. "Cooling module" may just be a fancy way of saying fan, mounting brackets, connectors and hardware.

Similar Messages

Is Cool 'n Quiet stable?

I run a K8N Neo2 Platinum (MS-7025) with 1.4 bios, 3800+ NewCastle CPU and Kingston HyperX 400MHz memory.
The setup works like a charm, but when I enable "Cool 'n Quiet" it seems to cause lock-ups and reboots.
The system is NOT overclocked, everything is set to AUTO in BIOS, except for memory which has been set to a bit slower settings than SPD reports.
When I have Core Center open on screen to watch what Cool 'n Quiet does, it seems like most of the time it reports 200MHz x 5.0 at idle, but when I start up an application, it can peak to 380MHz x 12 ?
Neither memory nor CPU should be able to handle that kind of FSB clock, so is it a system bug that the clock peaks at way above 200MHz? I really don't DARE to use "Cool 'n Quiet" for that reason, I need a stable system that doesn't hang or reboot in the middle of working.
Later,
Anders.

Quote
Originally posted by mrpiercer
{snip} both Core Center and cpu-z reports huge momentaneous jumps that takes the FSB to new heights.. Way over 300MHz in extremely short periods. Could it be that both applications simply gets tricked to think that the FSB is changed? If so, how come the systems locks up dead hard WITH C&Q enabled, but never once WITHOUT the C&Q enabled?
Andres,
I'm not getting the BSODs but the fluctuations do have me concerned. This thread is interesting. Blue screen caused by Vcore flucuations?
Raising the Vcore from 1.50 to 1.525 or 1.55 does seem to help stabilize my system but the CPU temp goes up. I've got a Thermalright XP-90 on the way so heat shouldn't be a problem.
===============================================
What I've found so far...
Cool & Quiet disabled in the BIOS.
Start CoreCenter running.
Start Speedfan running.
Start WCPUCLK
Put a full load on the CPU. (seti@home)
Just moving the mouse around causes a few alarming fluctuations seen in CoreCenter.
WCPUCLK doesn't register the fluctuations but I'm not getting BSODs.
1) Open CC. Click on CoreCenter , the program title button.
2) Click User
3) Set the fans on high
4) Click Apply.
Now the Vcore and FSB stabilize.
It appears that C & Q is turned off.
===============================================
It looks like what the other guys have been saying...Don't use CoreCenter except as a reference to help set up other programs like MBM and SpeedFan. Hmmm...RightMarks RM clock also sounds interesting.
Having a quieter system with Cool & Quiet turned on in the BIOS is nice. I'll have to do more testing to see if its stable. If C & Q is still causing instability after raising the CPU VID to 1.525 in the BIOS...I'll leave it off...Cie La Vie.
Later, Conrad

[865PE/G Neo2 Series] Suggestions for excellent Air/Fan Cooling - P4 Northwood

Guys, I need some advice here. I've got my 2.8 Northwood up to 3.16 (yea, I know, not great or anything but good enough for right now).
Anyway, with the coming of the blazing Summer temps hitting Michigan in the high 80-90s, my case and CPU temps are skyrocketing. I am finding that my idle temps, once at 31C are now at 35-36C, and the CPU temps once at 42C max under load are now reaching 50+ C. Also, this is the first time in months upon seemingly endless months that I am now getting random reboots, and I am sure it is due to soaring temps and heat problems. The room temps here are killer, and right now are in the high 70s...
I would like to please hear your suggestions/recommendations on a good AIR/FAN cooling solution for my specs I have listed below. I am looking for something that is not very loud if possible, I welcome and thank you for your comments!
865PE-NEO2-LS (601-6728-020)
AMI BIOS version 2.5
P4 Northwood, Socket 478, 2.8 Ghz/800Mhz FSB HT Enabled
4 DIMMS (256MBx4)=1GB KingMax PC3200 DDR400, Model # MPXB62D-38KT3R-PEA
PowMAX PS LP-8800D, 400 watt, max load +3.3@28A,+5@30A,+12@25A,[email protected],[email protected],+5vsb@2A, 70% min@full load
INTEL 865 .INF Drivers (6.0.1.1002 5/7/2004)
Main: Western Digital Raptor, 10K rpm, 36GB
2nd: Maxtor ATA133 7200rpm 120GB
CD-RW: Lite-On 52x32x52
BFG Tech GeForce 6800 GT OC 256MB GDDR3 AGP Graphics Card
SoundBlaster Audigy 2
ViewSonic Professional P225FB 22" monitor
Current Settings:
Configure SDRAM Timing by SPD   Disabled
CAS# Latency   3
RAS# Precharge   4
RAS# to CAS# Delay   4
Precharge Delay   6
Burst Length   8
AGP Aperture Size   128
FREQUENCY/VOLTAGE
Performance Mode (slow, fast, turbo, Ultra Turbo)   SLOW
DRAM Frequency   452
Adjust CPU Bus Clock (Mhz)   226
DDR Clock (Mhz)   452
Adjust AGP/PCI Clock (Mhz)   66.66/33.33
CPU Vcore Adjust   Yes
CPU Vcore   1.5375
DDR Power Voltage (Default is 2.50)   2.6500
AGP Power Voltage   1.5000
SiSoftware Sandra Prof. 2005 System Info
Front Side Bus Speed (4x)/Memory Bus Speed (2x)   226
Front Side Bus Data Rate (FSB Speed x4)   904
Memory Bus Speed (FSB Speed x2)   452
CPU SPEED (GHz with 14x multiplier)   3.16
CrystalCPUID 4.4.5.253 (C) 2002-2005 hiyohiyo
Crystal Dew World [http://crystalmark.info/]
OS : Windows XP Professional SP1 [ 5.1 Build 2600 ]
Date : 2005/06/08 0:48:10
CPU Name : Intel Pentium 4 HT (Northwood)
Vendor String : GenuineIntel
Name String : Intel(R) Pentium(R) 4 CPU 2.80GHz
Architecture : x86
Process Rule : 0.13 um
Platform : Socket 478 [2]
CPU Type : Original OEM processor
Number(Logical) : 2
Hyper-Threading : 2
Family : F
FamilyEx : 00
Model : 2
Stepping : 9
APIC : 00
Brand ID : 09
Microcode ID : 14
Feature : MMX SSE SSE2 HTT
PowerManagement :
Current Original
Clock : 3164.35 MHz 2800.00 MHz
System Clock : 226.03 MHz 200.00 MHz
System Bus : 904.10 MHz 800.00 MHz
Multiplier : 14.00 14.00
Data Rate : QDR
Over Clock : 13.01 %
L1 T-Cache : 12 KuOps
L1 D-Cache : 8 KB
L2 Cache : 512 KB [Full:3164.35 MHz]
Memory : 1024 MB
CPUID : EAX EBX ECX EDX
00000000 : 00000002 756E6547 6C65746E 49656E69
00000001 : 00000F29 01020809 00004400 BFEBFBFF
00000002 : 665B5001 00000000 00000000 007B7040
80000000 : 80000004 00000000 00000000 00000000
80000001 : 00000000 00000000 00000000 00000000
80000002 : 20202020 20202020 20202020 6E492020
80000003 : 286C6574 50202952 69746E65 52286D75
80000004 : 20342029 20555043 30382E32 007A4847
MSR : EAX1 EDX1 EAX2 EDX2
: 00000080 00000000 0E12000E 00000000
QPF : 3164.350000 MHz
Chipset Information
Chipset : Intel 865G/PE/P/848P (Springdale-G/PE/P)
North Bridge : [8086:2570.02] Intel 82865G/PE/P/848P
South Bridge : [8086:24D0.02] Intel 82801EB/ER (ICH5/R)
Video Chip : [10DE:0045.A1] NVIDIA GeForce 6800 GT (NV40)
BIOS Information by WMI (Windows Management Interface)
BIOS Vendor : American Megatrends Inc.
BIOS Caption : Version 1.00
BIOS Version : AMIINT - 10
BIOS Date : 09/29/2004
SM BIOS Caption : V2.5
SM BIOS Version : 2.3
Mother Vendor : MICRO-STAR INC.
Mother Product : MS-6728
Mother Version : 100
System Vendor : MICRO-STAR INC.
System Model : MS-6728
System Information by DMI (Desktop Management Interface)
SM BIOS Version : 2.3
BIOS Vendor : American Megatrends Inc.
BIOS Version : V2.5
BIOS Date : 09/29/2004
BIOS ROM Size : 512 KB
Mother Vendor : MICRO-STAR INC.
Mother Product : MS-6728
Mother Version : 100
CPU Socket : FC-478
CPU Vendor : Intel
CPU Version : Intel(R) Pentium(R) 4 Processor
Current Clock : 3164 MHz
External Clock : 226 MHz
Max Clock : 4000 MHz

Quote from: swambast on 08-June-05, 12:54:14
Guys, I need some advice here. I've got my 2.8 Northwood up to 3.16 (yea, I know, not great or anything but good enough for right now).
Anyway, with the coming of the blazing Summer temps hitting Michigan in the high 80-90s, my case and CPU temps are skyrocketing. I am finding that my idle temps, once at 31C are now at 35-36C, and the CPU temps once at 42C max under load are now reaching 50+ C. Also, this is the first time in months upon seemingly endless months that I am now getting random reboots, and I am sure it is due to soaring temps and heat problems. The room temps here are killer, and right now are in the high 70s...
I only know that I can't suggest a HS and fan because my temperature is higher than my 2.6GHz Northwood's since i decided to install the Thermalright XP90 and the 92mm UFO Thermaltake fan(~82CFM max.). I recently discovered an old picture from Speedfan saying CPU temp: 40C!!! Now right after boot up, I get 40-44C idle and it can climb up to 60C at full load. I know for a fact that air flow is bad inside the case but it's unbelievable to have 40C+ idle. It can't possibly be the air flow so soon after boot. The pressure (and contact) on the CPU was enough to actually see my CPU stuck on the base of the HS after removing the HS!!! A few pins had to be straightened too.
So, from my experience I think you already rock, since we have 30C(86F) already where I live. The feeling of the XP90 crashed under my boot will ease my pain...Oh, yes it will.
P.S. I 'll give the Arctic Silver a try before smashing the XP90 junk...
P4 2,6GHz Northwood
MSI Neo2-PFS 865PE (v3.2 AMIBIOS)
1 GB RAM PC3200 Kingston & TwinMOS
WD 800JB 80GB-7200RPM
CLUB ATI Radeon 9600Pro
Creative Audigy2 ZS

K9n platinum compatible with arctic cooling freezer 64 pro?

I'm picking up the X2 6400+ black edition and I was wondering if the arctic cooling freezer 64 pro is compatible with the K9N platinum.

This is the kind of simple query that Google can answer very easily
http://www.arctic-cooling.com/cpu2.php?idx=80
Quote
Application:
Up to 130 Watts
AMD Socket AM2+, AM2, 939, 754
- All Athlon 64 X2, Athlon 64
- All Athlon 64 FX, Sempron
- Opteron

Is there software to cool down my AMD turion duel core (M530) processor?

What it would be is software to lower the Processor frequency thereby lowering heat output of course slowing the speed also. but if I can keep the dv4-2145dx processor from overheating, which it seems to do without hardly any load I think I can relax some. Right now it's 50 degrees centigrade, which I believe is to hot for not doing much just on the net. I have a laptop cooler under it to!! The computer is brand new so dust is not the issue................

AMD's Cool 'n Quiet application is supposed to take care of that.
Cool 'n Quiet Basics
50 degress C is actually not too awful for a Turion...70 is where it starts to get toasty.
Cool 'n Quiet should already be enabled on your system. Make sure the power setting is for laptop so the frequency stepping can operate. Which Windows version are you running?

Satellite M40-244 stops suddenly - cooling/temperature issue?

Hello everybody!
For about 1 week, my laptop M40-244 has become unable of cooling itself! So, off course, more and more often, it stops suddenly in order to avoid damage. I'm sure this problem is triggered off by cooling, simply in touching the left side of the key board it's easy to me to feel the high temperature 8-(
My QUESTION is : is it possible for me to avoid repairing???
I'm in Shanghai, I can not phone without expensive fees, and surprisingly I did not find in Toshiba website any way to contact a Toshiba support by e-mail (if anyone knows a way, please tell me!)
Because it is very curious : my laptop is "8-months-old", never this kind of problem until now and Toshiba is wellknown for a good system of cooling. Recently, my laptop has not known any shock. Would it possible that the fan has suddenly stopped working well?
So, I tried to "check" my laptop, but the installation of Speedfan failed, and Motherboard Monitor 5 seems unadapted to the M40-244, it is totally unable of finding any board sensor! Now, I have seen in some forums and website the possibility of the "underclocking", or a way of "reinitializing" the fan from the BIOS, but, oula!, I'm not a specialist! What does it mean? It is possible with a notebook or it is only possible with a PC?
Here we go! So, I can go to a Toshiba store and I have warranty, but it is bound to mean 1 week without my laptop and professionaly it is extremely ennoying for me!
Sorry, I'm a bit long, and sorry for my English (I'm French!), but IF ANYONE KNOWS A WAY THAT ENABLES ME TO SOLVE THIS COOLING PROBLEM BY MYSELF, please tell me!
Thanks in advance,
Fred

Hi Fred
The vacuum cleaner cleaning procedure is not bad and very easy but you have to do it careful. But if it doesn't help you should contact the Toshiba service partner.
The fact is that your notebook is covered by warranty and if there is a serious problem with the cooling module and the fans the service partner should check it.
If you will click on this link you will find the list of the Toshiba ASPs:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Additionally you should check the settings in the Power saver because this Toshiba tool controls the usage of the CPU and the cooling method.
good luck

Satellite A200-1TW: loud cooling module due to the dust

Hey,
My fan gets louder by the day, and I think this is because there is a lot of dust inside my fan.
I have my laptop for about a year now, and live in an old house (= a lot of dust), so I was wondering: is there a tutorial somewhere on how to open it?
I can't find anything on this site, and on google neither.
The closest thing I found was this http://www.laptoprepair101.com/laptop/2006/02/04/toshiba-laptop-disassembly-manuals/, but unfortunately, it does not cover my laptop :(.
So I was wondering, does anyone have a tutorial on how to do this?
Or some experience themselves with it? I am mostly wondering whether I only have to take off the bottom, or the keyboard too?
Oh, and a last question: how about my warranty? If I open my laptop, do I loose it?

Hi
> Oh, and a last question: how about my warranty? If I open my laptop, do I loose it?
This is the most important reason why you should not disassemble your notebook!!!
Firstly you will lose the warranty secondly you could damage other parts!
Ive got other suggestion; why you dont clean the ventilators using a compressed air spray?
There are different compressed air sprays designed especially for such procedures!
This will help you to remove dust and debris from the cooling modules
I cleaned my fans many times using a compressed air this helped a lot of time

GT80 Titan Cooling Fans are on frequently than before

I just purchased the new 18 inch Titan and love it. However, I just started noticing the that the fans that use to come on infrequently and very quiet are now coming on more frequently. I have a cooling fan that sits underneath laptop there is nothing blocking or constricting the air ways. The laptop is turned off longer as I returned to a longer work day, and the temp in the home is in the low to mid 60s.
Is this something I should be worrying about? I have been frequently using the air duster on the laptop. Oh, I have only had the new monster machine for about a month.

Hi, how about updating BIOS and EC firmware to latest version?
Also maybe you have installed some resident programs in the background? Anti-virus and Windows auto update would also work in the background.
You can try to recover the OS to factory default and observe its status.
Using Shift feature to switch to Green mode might do some help when you only at office mode.

Satellite A215-S4757 - Battery life and cooling fan issue

Hello everybody,
I would like to ask a few questions abou my system: first of all, the cooling fan is running in my opinion too often: almost continuously, with brakes of 2-3 seconds. Is this normal?
I have my laptop since august last year and I think it shouldn't be a problem of dust, because it is too "young" for that and I don't live in a "dusty" appartment...
Anyway, I think the "almost allways running fan" problem appeared about 2 months after I purchased the notebook. I have installed "Speedfan" and I see "HD0" temperature is increasing from about 30deg immediately after I start the laptop, to about 39deg after 1 hour.
But the curious thing is that so named "Core" temperature is oscillating from the beginning between 45deg and over 52deg! The fan starts each time the core temperature is rising over 50deg and stops when the temperature reaches 45deg. Is this behaviour normal???
Is the core temperature of 45-50deg normal? I am just using my laptop for Internet browsing, e-mails, etc., no complex 3d games!
The second thing is that the battery life is (and was from the beginning) not spectacular: it lasts max. 1,5 hours with wireless on, but normal use of laptop (not playing dvd's or something like this). Is this normal? If yes, is it because of the amd turion 64x2 processors?
Please help me with some advices / opinions.
P.S. I've bought my Toshiba as I was on trip in USA (NY).
Thank you very much in advance.
Conrad

> I would like to ask a few questions about my system: first of all, the cooling fan is running in my opinion too often: almost continuously, with brakes of 2-3 seconds. Is this normal?
Im an owner of a Satellite A210. Its similar to the A215. The A210 is a European model and the A215 belongs to the US notebook series.
I have noticed the same on my A210 and I think its normal behavior.
> But the curious thing is that so named "Core" temperature is oscillating from the beginning between 45deg and over 52deg! The fan starts each time the core temperature is rising over 50deg and stops when the temperature reaches 45deg. Is this behavior normal???
The CPU temperature of 40-60deg is nothing unusual.
The temperature could arise up to 70-80degrees while playing a game. So dont worry about the temperature.
The cooling modules are controlled by BIOS. The fan table is stored in the BIOS and it contains informations about temperature limits and the cooling usage.
If a certain temperature level was reached the cooling module starts to rotate with a certain speed.
Now I would like to say something about the notebooks battery life time
Generally the battery life time depends on the notebooks usage.
While playing games or watching movies the battery would discharge much faster.
Anyway, your notebook was equipped with high-performance devices and as far as I know the Vista was preinstalled on this series. Both factors (high performance devices CPU and GPU) + Vista OS need a lot of battery power. Vista needs more notebook resources as the Win XP and therefore notebooks with Vista OS run shorter on battery as the notebooks with preinstalled Win XP.
Last but not least you have to know that there are different battery models A stronger battery with higher *mA* value would help to run the notebook longer using the battery power.
Hope I could clarify this question.
Bye

Memory cooling, good or not

Hy there,
have read several topics about cooling your memory for better performance. Some guys said is better other better no cooling on your memory.
Now my question is, see sig. I have 2 modules of apacer in slot 1 & 2 System works fine but still from time to time, blue screen, one or twice a month ??
Should I put some memory cooling on my memory or not. I have bought, some months ago, 2 copper memory heat spreaders and do not know if I better install theme or not ?

Set up for hard disks all are ide. Iomega Zip drive and Plextor Cd writer attached to a "CMD PCI-0649 Ultra DMA IDE controller" placed in PCI slot 5
In fact all is ide but now I remember in the past when I run Win 98 that extra DMA controller gave me some trouble when I installed win 98. Had to disconnect the controller thill win 98 set up was done and then connect the devices. Had to say was with another mobo abit and Pentium II
Running Win Xp no trouble at all.
With this mobo and Win XP setup all went fine. But mayby that controller causes the bleu screens so now and then.
And I know once or twice a month a bleu screen isn't so bad but still not so good I believe.

MSI Big Bang XPower II - Corsair H60 Water cooling issue

So I am using a Corsair H60 water cooling on my MSI Big Bang XPower II mainboard. I have followed the correct instructions on installation but every time I turn the computer on once it its 31 it shuts down. Everything seems to be working correctly except the cooling. There are no instructions that really relate well to installation for this water cooling to this mother board so I have tried placing the pump power and the fan power on various different inputs. I have the pump just on a sys power fan and the 120mm fan blowing through the coils on the back of the machine connected to the CPU 1 head fan (as instructed in their videos). I am not 100% sure the pump is working but I know that the fan is working and the hardware overview shows it recognizes the fan.
anyone have some ideas to try to see if I can get this to work? I am also wondering if it is a faulty pump or something but it seems to be working.

Quote from: seth.eckert
I have the pump just on a sys power fan
The pump is not working. The 3-pin connector for a fan header is just for reading out pump speed. You need to power it with the molex connector.

How to change the cooler on Satellite M30-344?

Hello,
I´m pretty lucky with my Satellite M30-344 but since 2 months the cooler starts to get louder every day. Is it possible to change the cooler on my own and how expansive is the original cooler? Do you know something like a tutorial for the changing process?
Originally 2 256MB Ram pieces is installed. Now I´m thinking about a bigger RAM piece. As far as I know the are only 2 slots for the RAM or am I wrong. Is it possible to install two 1GB RAM pieces???
Thank you for your help!

Hi
The replacement of the internal devices is not easy and a little bit risky.
I would not recommend replacing the cooling module yourself.
You could damage something on the board and as you know the motherboard is a one of the expensive parts of the notebook. The manuals are not published because such documents are only for the technicians and service partners.
Therefore I think you should ask a service partner for the help because these guys have more experience in such procedures.
I found a online site with the memory modules for Satellite M30-344
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=6958&ft=m&st=3
It says that its possible to update the memory to max 2GB. Therefore I Think its possible to use 2x 1024MB module.

Problem with motherboard and cpu cooler

First of all , hello.
Let me present my current pc.
Mainboard - MSI 880GM-E41
CPu - Amd phenom x2 560 black - unlocked to quad
Ram - 4 gb kingmax DDR 3
Video - Gainward GTS 450 512 DDR 5
Hdd - Western Digital 640 GB
Power suply - Sirtech 400 W
Now the problem.I bought a Scythe Katana 3 cooler because i couldnt stand the noise from AMD stock cooler anymore.
The cooler RPM in idle/load / full load is 2800 RPM (maximum !) Shoudnt the mainboard set the cooler's rotation to match the processor current usage ? My cooler stand in maximum rotations every single time.
Note that my temperatures are excelent.
I took a look in Bios and could find much.
H/W Monitor
Cooler - 4 pins selected
Smart fan target - disabled selected.Guess this is the automatic option.I dont wanna set it to manual in order to give some values.
Amd cool and quiet - enabled (tried it with disabled too , same deal)
C1E support - enabled.
Would updating my bios to lasted available solve this problem ? I wanted to do that but i wonder if updating the bios would interfere with my unlock of the processor's cores.
Thanks you very much.

Yes , it is
I dont actualy have an "enabled" option....just disabled or some values.
I heard from a friend that :
Smart Fan Target - the critical temperature from which the fan starts to grow in rotations
Cpu Min.Fan Speed - the desired rotations per minute in idle
Is this correct ?
Im thinking about
First - 45
Second - dont know....i have to test with different values.

My Iphone 4 wont restore from a back up, during the process the phone says it needs to cool down and disappears from itunes

I DROPPED MY IPHONE IN THE WATER. A MESSAGE SAYING THAT THE IPHONE NEEDS TO COOL DOWN APPEARED REPETEA REPEATEDLY. I RESTORE TO THE FACTORY SETTINGS AND NOW IT DOES NOT LET ME RESTORE FROM A BACK UP!!! IT KEEPS SAYING IPHONE NEEDS TO COOL AND IT DISAPPEARS FROM ITUNES
ANY SUGGESTIONS?!!!!!!!!!

We're fellow users, STOP YELLING AT US! At the very least, get your CAPS lock key fixed.
The device was dropped in water, it is damaged, take it to Apple along with cash or a credit card and get an Out of Warranty replacement.

New Features it would be cool to see implemented in the future

I really love itunes, but have some ideas of things that could be improved upon in the future:
Firstly this in an issue about something that used to work better than it does now: it used to be that if you had a smart playlist set to live update on your ipod it would update on the ipod itself, not just itunes. here's an example: if the list was set to only have songs with a playcount less than one (ie, unplayed songs) then if those songs were played and the playlist was exited from and reentered, those songs would then no longer appear in the playlist. This was a feature I used with regularity, but now cannot due to updates to my ipod's os.
Secondly, it would be great if more logic were added to the smartlist functionality. As of now, you can either have a list follow all or any of the options. it would be great to have logic more along the lines of: this and this or this or that. that way some very interesting and specific lists could be created.
also, it would be cool if the blue dot that appears next to a podcast if it is new would last until that podcasts has been played through in full (ie playcount=1) instead of just in part.
another useful addition would be the choice to designate a playlist as video only, audio only or any. that way videos wouldn't pop up in audio lists.
finally it would be great to have an option to say if the ipod it being charged, then the backlight would automatically turn on and stay on (timer turned off).

http://www.apple.com/feedback/

Can't open .ses file in Cool Edit 2.1

Hello,
I hope I'm on the right forum here. I have a big problem with a *.ses file in Cool Edit 2.1. When I try to open it it simply doesn't do anything. It starts Cool Edit but it doesn't start importing the files and effects of the tracks.
I saved the project last night, there is no recover file for it. There are to many wav files to recover it manually...
If someone could help me and give an advice why I can't open it anymore, I would be really thankful!
Greetings,
Christian

Thanks Steve
Just email me the ses file (no audio).
Send it to me via the aatranslator website
You should checkout my SesBackup program - also available via the same site

Cooling

Similar Messages

Maybe you are looking for