Coolpix p80 - view without uploading

Hello,
I have two older C0olpix cameras (2500 and 2100) which can be connected via USB and show up as external drives that can be expored in the finder so I can look at images before downloading to the computer.
My new Coolpix p90 does not show up as an external drive. It seems my only options are to upload via iPhoto or Image Capture and then view and keep or delete.
Is there a way around this? I have not tried installing the Nikon software as it looks like a large app that I'd rather not waste space with, but if it would allow mounting the camara as a drive then perhaps I should.
Any advice is appreciated .
thanks
jv

jv
This is most likely a setting on the Camera rather than anything else. Make sure it supports the Mass Transit protocol for interacting with your Mac.
Other than that the best way is to pop the card into an inexpensive USB Card Reader. Then it will mount on the desktop.
Why use a Card Reader?
Because it’s safer: Less risk of your images being lost if your camera shuts down during transfer.
Because it saves the battery on your camera
Because it saves wear and tear on your camera ports
Because it’s almost always faster.
Regards
TD

Similar Messages

Adding Viewer to Uploaded photos

How I can I add a viewer to uploaded photos or do I have to upload them again?

I am sorry my question was not clear. I have uploaded a group of photos to share with some friends. I want to add another friend to the list of authorized viewers. How can I do that without uploading the whole file again? Thanks for your help.

How to make an alert view without buttons on iphone?

Hi,
I'm trying to create an alert view without buttons. On my iphone application I have to run a process, while the process is running I want to display an alert view with info about the process, and then when the process is done I want to dismiss that alert view.
Any ideas about how to do this?
Thx!

this is what i use. I added in an ActivityIndicator just for looks
UIActivityIndicatorView *loadingInd = [[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(120.0, 90.0, 30.0, 30.0)];
alertView = [[UIAlertView alloc] initWithTitle:@"Loading" message:@"Telling your Mom" delegate:self cancelButtonTitle:nil otherButtonTitles: nil];
loadingInd.activityIndicatorViewStyle = UIActivityIndicatorViewStyleWhiteLarge;
[loadingInd startAnimating];
[alertView addSubview:loadingInd];
[loadingInd release];
[alertView show];
[alertView release];

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

How to add a record in document library without upload file.

Hi,
how to add a record in document library without upload file?
Is it possible? I want to create a folders in Document Library but inside folders i do not want to upload a file instead of just i want to create a record. I will map my local file path to the records.
Can anyone help me on it?
Thanks & Regards
Poomani Sankaran

Hello Sankaran,
document library is to upload documents, without document you will not be able to add a record or Item to it.
for your requirement you can use a list and enable folders within the list and maintain the local path of the file as an item in list.
http://www.sharepointbriefing.com/spconfig/article.php/3834951/Enable-the-New-Folder-Creation-Option-in-SharePoint-Custom-Lists.htm
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to speed up fast refresh of materialized view without primary key

Thought I'd share this info, as I couldn't find anything on here to help me diagnose the issue:
I had a materialized view that was taking longer to perform a fast refresh than it took to perform a complete refresh. My mview had no primary key, as the base table had no primary key.
I created a trace file for the session and saw references to a column M_ROW$$ in my mview. Nowhere in the data dictionary could I find a reference to the m_row$$ column in my mview, but apparently it exists and is created automatically. After creating the index below, the fast refresh took 6 minutes to add 500k rows to the materialized view. (versus 4+ hours without the index) When I looked in the trace file, I noticed that for each row in the mview log, it first tries to update the mview with an UPDATE statement, then it performs an insert of the new data. Seems like it should be able to determine whether to perform an update or insert based on the DMLTYPE$$ column of the mview log. What was killing my performance was the UPDATE phase. Since I had no primary key on the mview, and no index on the m_row$$ column, the UPDATE phase was performing a full table scan of my mview for every row in the mview log. I was expecting it to be smart enough to only perform inserts, as the only transactions against the base table were inserts.
In summary: If you have a materialized view without a primary key, create an index on the m_row$$ column of the mview, even though no such column displays in the data dictionary.
ex:
CREATE MATERIALIZED VIEW mv_minidrr ...
CREATE INDEX pk_mv_minidrr ON mv_minidrr(m_row$$) ...

Well, there indeed is a column called M_ROW$$
Your MLOG$_EMP is nothing but the materialized view log on the base table.
SQL> create materialized view log on emp with rowid ;
Materialized view log created.
SQL> create materialized view emp_mview refresh fast on demand with rowid as select * from emp ;
Materialized view created.
SQL> desc mlog$_emp
Name                                                  Null?    Type
M_ROW$$                                                        VARCHAR2(255)
SNAPTIME$$                                                     DATE
DMLTYPE$$                                                      VARCHAR2(1)
OLD_NEW$$                                                      VARCHAR2(1)
CHANGE_VECTOR$$                                                RAW(255)
SQL> select table_name, column_name from user_tab_columns where column_name = 'M_ROW$$' ;
TABLE_NAME                     COLUMN_NAME
MLOG$_EMP                      M_ROW$$
1 row selected.
SQL>

Can you select the row in a table view without highlighting the cell?

I have an an app with a table view which is presented modally. Cell selections in this table are saved in the parent controller so that they can be reselected if the table is reloaded after being dismissed.
When the cell is first highlighted, I want to momentarily highlight the cell and have it fade out, which I do by unselecting the cell from the modal view controller's didSelectRowAtIndexPath by calling setSelected:animated on the table view cell.
However, when I present the table view controller modally again and want to display the previously selected cell as selected, I don't want the cell background to be highlighted, and I'm having trouble doing this.
In order to make sure the table view knows the cell is selected, I am calling selectRowAtIndexPath. I need to make sure the cell is selected so that I can set/unset the cell's accessoryType. However, this has the sideeffect of highlighting the cell too, which looks weird and confusing to the user.
I've tried things like temporarily setting the cell's selection style to none, but while that stops the cell background from highlighting? I've tried setting the selectionStyle to UITableViewSelectionStyleNone, but while this prevents the cell background from highlighting, the cell text still changes to white, so it the text is invisible against the white background.
Is there a easy way of setting a cell to selected in the table view without also changing the highlight and text colour of the actual cell? Immediately setting the cell to be unselected still makes the highlight visible for a split second.

I tried that, but setting the highlighted property doesn't seem to affect it.
I figured out how what I was doing wrong though. I was setting selection style UITableViewSelectionStyleNone, selecting the cell, then setting the selection style back to whatever it had previously been. This causes the background not to draw highlighted, but the text and accessory type to still draw highlighted.
In order to fix this, I moved the code to set the cell selection style to whatever it had previously been to the didDeselectRowAtIndexPath method.

How can I see more than 6 all day events in the week view without scrolling?

How can I see more than 6 all day events in the week view without scrolling? I need to see all of my all day events at once. I use this for scheduling and comparing of # invoices. Going back and forth to scroll is cumbersome. I just want to be able to expand the top section so I can see everything at once.

Any ideas, anyone?

How to call a view without event handler onaction method.

Hi Experts,
I have develop a WD application. It has three views let view1, view2 and view3.
In view1 one button is there (onaction) which navigates to view2 through outbound plug wd_This->Fire_Out_Screen1_Plg(   ). where Out_Screen1 is outbound plug of view1.
Now view2 appears , I want that after 10 seconds view2 automatically call view3, without action on view2.
I have written like wd_This->Fire_OUT_SCREEN2_Plg( ). where OUT_SCREEN2 is outbound plug of view2, which navigates to inbound plug of view3.
But its not working. Please suggest how to and where to write code to call a view without action .
for ur ref.

Hi Bhagat,
Yes, you can attach media objects into a view
Using IFRAME ui element and html mime object.
     Please refer the below link
To insert video in webdynpro - Web Dynpro ABAP - SCN Wiki
Using Flash Islands
          Here, you need to have your audio/video file as flash object
     Please refer the below tutorial on flash islands( a generic example )
     Adobe Flash Islands for Webdynpro ABAP
Hope this helps you.
Regards,
Rama

Pager app that can be viewed without unlocking the phone

I am looking for a pager app where the pages can be viewed without a person unlocking the phone or knowing the passcode to unlock. A doctor I work for wants his pages to come through to hs phone, but he doesn't want the nurses and others who check the pages for him to be able to go through his phone and see his personal information such as texts and emails. Is there any kind of app that would allow viewing of only the pages sent to him without unlocking the phone and giving multiple people access to any information in the phone? Currently, he just carries a pager as well as his phone which is not ideal. Thank you!

Hey guy;
I have the same problem and I do anything you can imagine. If you leave your phone about two or three days and after that plug in it your phone will be power on but your problem doesn't fix. I tried to restore as a new phone, reset all my settings and also I contacted Apple Support but I couldn't fix it. I think that it would be a software issue because it occurred right after iOS 6.1.3 update. It look likes that we have only two choice. First choice is waiting until Apple release next iOS update and check it in our phones, and the other choice is visiting an Apple retail store to diagnostic our phones for hardware issue.

I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

If your CDs are on your iPod/iPhone, they can be recovered from there,see this post:
https://discussions.apple.com/message/11857427#11857427
Your problem shows the importance of making backups.

Convert VMDK to VHD locally without uploading to Hyper-V or Azure

Hello,
I'm running Windows 8.1 Professional on my laptop. I'd like to convert a VMDK to a VHD, without uploading the resulting VHD to Azure or Hyper-V directly. I'll handle the image upload and VM creation through my own PowerShell scripts. How can I use the Microsoft
Virtual Machine Converter tool to achieve this? The GUI only gives me the options to upload directly to Azure or move the VM into Hyper-V, neither of which I want to do. I simply want to perform the conversion, for the time being.
Cheers,
Trevor Sullivan
Microsoft MVP: PowerShell
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

Hmmm, I just read the documentation for the PowerShell commands in the VM converter tool, and it appears that there is a command called ConvertTo-MvmcVirtualHardDisk that will do what I need it to. As I suspected, I might have to drop
the GUI and just go with whatever command line automation is available. Even better. :)
Cheers,
Trevor Sullivan
Microsoft MVP: PowerShell
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

No.

How can I view and upload videos to shared photos streams on mac

I use shared photo streams alot how can I view videos uploaded to a shared photo stream on my mac

You can not at this time - tha tis only an IOS 7 and PC feature today - mayber with future software releases
http://support.apple.com/kb/TS4379?viewlocale=en_US&locale=en_US
What software versions do I need to be able view and share videos, and contribute to other people's shared streams?
iPhone, iPad, or iPod touch with iOS 7.0 or later
PC with Windows 7 or later and the iCloud Control Panel 3.0 or later
AppleTV (second generation) with Apple TV Software Update 6.0 or later
If the owner of the shared stream has turned on the Public Website option and shares the link with you, you will be able to view videos and see photos and video added by all contributors from any up-to-date browser.
LN

ORA-01445: cannot select ROWID from, or sample, a join view without a key-p

Hi All,
I am facing issue with one sql query. It is giving me error:
ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table
I am not getting any clue to solve this. On internet, i didn't find proper reason for this error and troubleshooting way and solution for this error. Everywhere i saw one sentence, "Key preserved means the row from the base table will appear AT MOST ONCE in the output view on that table" but it didn't solve my problem.
I have 1099 columns in one select query. so avoiding the actual column list in select clause. Instead I am trying to select ROWIDs from all tables in join. My understanding is ROWID is a unique identifier in table not in database. But though I remove ROWIDs, I get same error. So please don't bother about these ROWIDs.
SELECT
TO_DATE(FACT.BUS_DATE_FKID,'YYYYMMDD')
,FACT.ROWID AS ABC1
,FACT_ADJ.ROWID AS ABC2
,DIM_SEC.ROWID AS ABC3
,DIM_SEC_ADJ.ROWID AS ABC4
,DIS_CAT.ROWID AS ABC5
,CTRY.ROWID AS ABC6
,BCP.ROWID AS ABC7
,STAGE.ROWID AS ABC8
FROM FACT_POSITION FACT
LEFT JOIN FACT_POSITION_ADJ FACT_ADJ ON FACT.POSITION_PKID = FACT_ADJ.POSITION_FKID
LEFT JOIN DIM_SOURCE_SYSTEM SOURCE ON FACT.SOURCE_SYSTEM_FKID = SOURCE.SOURCE_SYSTEM_PKID
LEFT JOIN DIM_SECURITY DIM_SEC ON FACT.SUBSYS_SECURITY_FKID = DIM_SEC.SECURITY_PKID
LEFT JOIN DIM_SECURITY_ADJ DIM_SEC_ADJ ON FACT.SUBSYS_SECURITY_FKID = DIM_SEC_ADJ.SECURITY_PKID
LEFT JOIN DIM_DISCLOSURE_CATEGORY DIS_CAT ON FACT.DISCLOSURE_CATEGORY_FKID = DIS_CAT.DISCLOSURE_CATEGORY_PKID
LEFT JOIN COUNTRY_REFERENCE CTRY ON CTRY.DESCRIPTION = DIM_SEC.ISSUER_COUNTRY
LEFT JOIN BUSINESS_CLOSE_PERIOD BCP
ON BCP.BUSINESS_CLOSE_DATE = ADD_MONTHS(TRUNC(TO_DATE(FACT.BUS_DATE_FKID,'YYYYMMDD'),'MM'), 1) -1
AND BCP.IS_LOCKED='Y' AND BCP.IS_ACTIVE='Y'
LEFT JOIN GUI_STAGING STAGE ON
FACT.POSITION_PKID=STAGE.POSITION_PKID
AND STAGE.IS_ACTIVE='Y'
AND STAGE.STATUS_ID IN(12,8,1,2,3,4,5)
WHERE FACT.POSITION_PKID=64524374;
While trying to sort this error, I found interesting things that made me more confused.
if I remove TO_DATE function from select clause, same join query works.
If I remove any table from join and keep TO_DATE function in select clause, query works.
That tells, there is no problem in query.
Then please anyone help me to sort out the error. FYI. I have googled a lot for this error. but didn't get solution/clue. That is why I am posting this problem to forum.
Thanks in advance. waiting for reply ASAP.
Pravin Pujari
[email protected]

I think i got the solution. The syntax i was using (ANSI syntax) doesn't work in the oracle database version i am using.
When i updated my query with older oracle syntax, it worked.
SELECT
TO_DATE(FACT.BUS_DATE_FKID,'YYYYMMDD')
,FACT.ROWID AS ABC1
,FACT_ADJ.ROWID AS ABC2
,SOURCE.ROWID AS ABC3
,DIM_SEC.ROWID AS ABC4
,DIM_SEC_ADJ.ROWID AS ABC5
,DIS_CAT.ROWID AS ABC6
,CTRY.ROWID AS ABC7
,BCP.ROWID AS ABC8
,STAGE.ROWID AS ABC8
FROM [email protected] FACT
,[email protected] FACT_ADJ
,[email protected] SOURCE
,[email protected] DIM_SEC
, [email protected] DIM_SEC_ADJ
, [email protected] DIS_CAT
, GUI.COUNTRY_REFERENCE CTRY
, GUI.BUSINESS_CLOSE_PERIOD BCP
, GUI.GUI_STAGING STAGE
WHERE FACT.POSITION_PKID=64517140
AND FACT_ADJ.POSITION_FKID(+) = FACT.POSITION_PKID
AND SOURCE.SOURCE_SYSTEM_PKID=FACT.SOURCE_SYSTEM_FKID
AND DIM_SEC.SECURITY_PKID=FACT.SUBSYS_SECURITY_FKID
AND DIM_SEC_ADJ.SECURITY_PKID(+)=DIM_SEC.SECURITY_PKID
AND FACT.DISCLOSURE_CATEGORY_FKID = DIS_CAT.DISCLOSURE_CATEGORY_PKID
AND CTRY.DESCRIPTION = DIM_SEC.ISSUER_COUNTRY
AND BCP.BUSINESS_CLOSE_DATE = ADD_MONTHS(TRUNC(TO_DATE(FACT.BUS_DATE_FKID,'YYYYMMDD'),'MM'), 1) -1
AND BCP.IS_ACTIVE='Y'
AND FACT.POSITION_PKID=STAGE.POSITION_PKID
AND STAGE.IS_ACTIVE='Y'
AND STAGE.STATUS_ID IN(12,8,1,2,3,4,5);

Coolpix p80 - view without uploading

Similar Messages

Maybe you are looking for