Coolsense is blocked by Windows 10

I have just upgraded my Windows 7 to Windows 10 Pro. I am unable to open the coolsense. Windows is blocking the app with an error message: "App has been clocked ....".I tried disabling the smart filter settings and some other related stuff. No change.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the HP CoolSense Technology, and wanted to assist you! Please have a look at the following resource, and see if the solutions offered will help:HP CoolSense Stopped From Working After Windows 10 Upgrade If you are still having trouble, then I recommend using the Go back to an earlier build option, in your System Settings: HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Similar Messages

Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please help me.

Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

What happened to the "Block Popup Windows" menu item in Safari 6?

What happened to the "Block Popup Windows" menu item in Safari 6? Seems to be gone.

Shheesh! Loki is saying that this was a very useful tool/option. Is there any way to BRING IT BACK TO THE SAFARI MENU? Not how to do it in Preferences.
What I am saying is: What incompetent is responsible for this build of Safari? There was no reason to take that out... plenty of room in the Safari menu. But if you REALLY want to know why I'm ******, Older people can no longer go into "Appearances" and change the Fonts and Size without knowing how to use terminal or how to make .css files. (which doesn't work well anyway)
This build is infuriating.

Cannot block popup windows

Using Safari 3.1.
In the last couple of weeks I have noticed that popup windows are appearing, even though I have checked "block popup windows". If these are associated with a given site that I visit, I haven't figured out which.
Is anyone else having the same problem?

Sorry - but this does NOT solve the problem (Cannot block popup window). It will not prevent the same site (scanner2.malware-scan.com/5.swp/scan.php. .../) from popping up its window (and proceeding with an unauthorized download - of MS Windows .exe files) if you inadvertently revisit the site. So it is still an unresolved Safari "bug", as of 11 May 2008.
However, you CAN kill the download, using Safari > Quit, and then simply delete the .exe files from your Downloads folder.

Has Safari 5.1 broken the Block Popup Windows feature?

I like most of the changes in Safari 5.1, but the Block Popup Windows feature doesn't seem to work any more. Is anyone else having this problem?

Same problem on windows 7 64-bit i3-based machine.

My scrollbars disappear when resizing my LabView8.6 Block Diagram window

My design can't be seen in it's entirety within the Block Diagram window so I need to use the vertical and horizontal scrollbars to navigate the design. The scrollbars disappear if I resize the Block Diagram window past "some point". If I shrink the window very small, the scrollbars reappear. Other programs I've generated don't seem to have this problem. Any suggestions?

Hi,
Check the scrollbars settings, right click on vertical/horizontal scrollbars and change the settings. If the problem still exists, U can send me ur vi, let me have a look to know the exact problem.
regards
sunil

Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge

Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge is missing, so not clear how to import. Overall it seems unstable. Am I doing something wrong? Trying to evaluate before buying so working on a trial version (14 days left), but a bit concerned with Captivate 8 Performance. Please help! :-

Hi Vikram and Lilybiri,
Thanks for your responses :-)
I'm working on Windows 8.1... I think that I may have found the issue... I was saving the file in a project directory rather than the default My Captivate Projects folder...
Perhaps Captivate was struggling to find resources it needed?
It hasn't crashed for a while now, though it is struggling - I'm working with a 54 slide PPT presentation that is linked and it takes a very long time to interact.
Sometimes it says that I've removed slides, which I haven't?
Best,
Christy.

Uninstalling the 'block popup window' using ' safari'... preferences security did not help. Can somebody please help?

Why turning off ' block popup window' does not work for me when i open the page?

r! A popup blocker may be preventing the application from opening the page. If you have a popup blocker, try disabling it to open the win

Firefox is blocking popups that I want to see, even after I have unchecked the Block Popup Windows in Options.

There are several sites that provide popups that I want to see. Firefox had not been blocking them previously. Then today it did. I went to Options and listed these sites as exceptions. It still blocked them. I went to options and unchecked Block Popup Windows. It still blocked them. I uninstalled Firefox and reinstalled a new copy. It still blocks them. What do I do now?
BTW, this does not occur when I access the same sites with Internet Explorer.

I have the same issue. I am using windows 7 ultimate and have it on a laptop which has no issues. It is only one pop up i want to come up and it blocks it. I am using zone alarm as well, and I turn it off and it makes no difference. IE works and I HATE Microsoft. I wish Mozilla would come up with a fix.

How do I stop firefox from blocking next window unless I click on OK

Some how a while back I turned on the feature to have firefox block the next window or page to open. A message pops up "firefox preventing next page to open and at the other side of the screen there is a box that says allow" I don't know where to look to stop this feature. Not sure why I did it in the first place.

See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

Cannot connect to the iTunes store. Get 'Error 11222'. Claims it is being blocked by Windows Firewall when it is allowed through.

When an external application tries to connect to it through iTunes I get 'Error: 11222'. When I try to connect through the iTunes app it just continuously loads but nothing appears. Diagnostics says that Windows Firewall (Which is being managed by McAfee) is blocking it, even though it is allowed through both firewalls I have. Even when I turn WF off iTunes claims it is being blocked by it. I have done almost everything Apple's support pages have suggested but nothing has worked. I'm using it on an Acer Aspire laptop, and the main PC can use iTunes without trouble so it isn't the ISP. I have uninstalled and reinstalled iTunes twice. Here is a full diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Acer Aspire 5738
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0042AD4403249D18
Current user is an administrator.
The current local date and time is 2012-08-23 23:19:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Mobility Radeon HD 4570
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Lease Expires:       Fri Aug 24 21:30:18 2012
DNS Servers:         192.168.1.254
Adapter Name:        {43E41B54-39BF-45DB-A846-41062D127AFE}
Description:            Broadcom NetLink (TM) Gigabit Ethernet
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Thu Jan 01 00:00:00 1970
Lease Expires:       Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
Please help me!

The 11222 errors can sometimes be produced by LSP trouble. One of the suspects with that is some versions of McAfee Family Protection. For troubleshooting advice, see the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

Creation of blocking modal windows

Hi
I’m struggling, for sometime now, with the famous
a-synchronic behavior of flex.
I’m trying to develop a function that resembles the
famous VB “MsgBox ()” and opens a UI container (e.g.
like a Title window) in Modal mode while blocking the continuation
of the rest of the code until the UI closes.
I would like to be able to write something similar to the
following set of commands:
MsgBoxInFlex( …..); \\ blocks operation until UI closes
if (x=……)
Problem – as far as I know – is that such a call
to a function (i.e. MsgBoxInFlex) returns the control to the
calling code after the function has finished with no connection to
UI container status. This means that the if command will be running
as soon as the UI will be created and displayed.
Is there a way to both create and work with on the UI
container before the MsgBoxInFlex function returns?
Is there a way to return after a different event - such as
form closure?
Is there a way to capture and block the creation completed
event from being transmitted and decide on when to send it?
Any ideas will be welcomed.
Thanks
Raz

Thanks for your response –
The problem with using popup modal windows (such as Alert) is
that the calling program does not stop from executing while in VB
(or in other tools) the application waits for the Modal window
thread to return.
Raz

Blocking popup windows even when disabling the popup blocker

For quite some time now, Firefox has been blocking essential popup windows on my computer. It's not just those annoying ones, even those when I am trying to write an email and similar things. I have disabled the popup blocker and it does not change anything at all. It does not alert me that it has blocked anything either, it is simply as if I never clicked anything in the first place. I have tried adding exceptions to my popup blocker, and this does not work either. This is really frustrating and is interfering with my daily use of firefox, and forces me to use crappy explorer which does not block things. What can I do?

Hi Sachin
Thank you so much for the reply.
About your request, the codes that I used are:
HTML for the PopUp:
<SCRIPT LANGUAGE="JavaScript">
function popUp(URL) {
var iMyWidth;
var iMyHeight;
//half the screen width minus half the new window width (plus 5 pixel borders).
iMyWidth = (window.screen.width/2) - (250 + 10);
//half the screen height minus half the new window height (plus title and status bars).
iMyHeight = (window.screen.height/2) - (225 + 50);
//Open the window.
var win2 = window.open("http://xarao.businesscatalyst.com/caipiroska.html","Window2","status=no,height=450,width=500,resizable=yes,left=" + iMyWidth + ",top=" + iMyHeight + ",screenX=" + iMyWidth + ",screenY=" + iMyHeight + ",toolbar=no,menubar=no,scrollbars=no,location=no,directories=no");
win2.focus();
</SCRIPT>
For the Link:
javascript:popUp('http://xarao.businesscatalyst.com/caipiroska.html')
Of course for all the different links in the page I've changed the http of each image in both codes.
http://xarao.businesscatalyst.com/cocktails.html
Thank you once more.
Best regards,
Augusto

Oracle12c SQL*NET blocked by Windows 2008 firewall - what is the correct solution?

Hello,
I have a question with regards to the SQL*NET traffic being blocked by the Windows 2008 firewall. This document shows that disabling the firewall can resolve the problem:
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=166773506396122&id=1472931.1&displayIndex=13&_afrWindowMode=0&_adf.ctrl-state=o4dq0hlih_112
Is this really the solution?
From what I understand from other documents is that just enabling port 1521 will not resolve any issues, as SQL*NET can use redirection to other random ports. That is probably the reason why the Oracle installation does not alter any firewall settings.
What other methods do people use to connect a client to a DB server?
This document shows what other methods to use, but who uses them?
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=166043735580557&id=68652.1&_afrWindowMode=0&_adf.ctrl-state=o4dq0hlih_78
Does anyone use the Oracle Connection Manager for example?
Thanks
Richard

I configure firewall to allow DB Server to start new network connections

How to block popup windows that opens up on clicking a link?

Hi,
How to block pop-up windows that opens up when a link is clicked? The feature in IE is to set the Blocking level as 'High: Block all pop-ups (Ctrl + Alt to override)' in Pop-up Blocker settings.
Is there a similar feature in Mac?
Thanks & appreciate the support

In the menu bar, Safari > Preferences > Security > Web Content
Some popups will not be blocked by this method, but blockable popups will be.

Coolsense is blocked by Windows 10

Similar Messages

Maybe you are looking for