Coordinates move after saving

Hi
Need some assistance here I think.
Not sure if I'm doing something wrong or if it's a bug.
I'm creating a pixel-like drawing using 1mm squares, need to be very accurate.
Going through this process...
- I've got a .psd file as a background reference image (the black on the attachment).
- 0 / 0 the rulers
- have a 1mm grid in place
- placing my first pixel to a whole number x / y coordinate
- then Object>Transform>Move by whole number digits
- then start creating the illustration (the magenta squares)
- every now and then I'll check the coordinates of the individual squares and all looks fine
Save the document
Then go back to find that what was 25 on the x axis is now 25.002 and likewise for the y axis.
Have tried with and without the grid, with and without snap to grid... all with the same results.
Can anyone help?
Cheers
Mick

Mick,
I believe you are looking at the inherent inaccuracy; all measures and coordinates are fundametally based upon points, so small deviations in other units form are well known. You will not encounter the issue if you work in points/pixels as the unit.
Apart from that, you may consider Effect>Distort&Transform>Transform, then set the Move and the number of Copies.
You may Object>Expand Appeanance afterwards if you wish to have individual squares.

Similar Messages

  • How do I  "mask" or blurr out sections of movie clips saved in windows media format in After Effects

    I was informed that I needed to use After Effects to "mask" or blurr out sections of movie clips saved in windows media format.
    I have the movie clip in composition, I see the effects and presets drop box on the lower right.
    How do I insert the text blocks to mask certain areas of the movie clip?
    Thank you,
    Preston

    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest
    There's seriously nothing more to say. Watch some tutorials, read the help, learn the program.
    Mylenium

  • Signature Scribble field not retaining image file after saving

    I have 2 issues with my PDF dynamic file I sent out
         1) The add/remove controls is adding a random amount of extra blank rows upon saving the PDF
         2) The image files selected for the Signature Scribble field is not retaining the image file after saving. It also doesn't give an opportunity to actually draw in a signature.
    I even tried to use the Subform Instance Controls Insert/Remove/Move in my table, but I keep receiving the error "You have reached the maximum number of items allowed"
    I would appreciate any help you can give me! I have been farting around with this for too long.
    Thanks!
    Rhonda

    Thanks Pat.  Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped.  Uninstalled Reader and Flash as well.  Strange thing with Flash, one of my online broker programs provides streaming of CNBC.  When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash.  I did, and it loaded again with no mention of Flash having already been installed.
    Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE).  Expanding the window in WE makes it large enough to read.  I would still like to find a way to open the files as they are designed to open.
    I have done all of the Adobe updates as they have been presented.  Microsoft updates load automatically, and restart my computer in the process.  I do not look to see what the updates have been.  I figure if there was not a need, Microsoft would not make the updates.
    [private data removed]

  • Error after saving co11n document

    Hi
    While Entering Confirmation of Production order using tcode CO11N, at the time of saving, it showing the message ( Confirmation Saved (Goods movement 2, Failed 0) )
    afterwards showing below message
    Express Document u201CUpdate was terminatedu201D received from author u201DUserNameu201D
    Message detail in INBOX
    Update was terminated
    System ID....   PRD
    Client.......   444
    User.....   CEO
    Transaction..   CO11N
    Update key...   51817DDDDE72F1F09150001A64484A38
    Generated....   08.09.2008, 14:07:45
    Completed....   08.09.2008, 14:07:45
    Error Info...   F1 109: Line item 001
    ============----
    Here we are started to capture Personnel ID
    Pls. help in this.
    Prakash

    Hi Prakash,
    As per your error message the problem is the document updation is not happening in the system according to your data, you tell ABAP or Basis people they will help you in that it may realeted to technical or configuration.The technical people can tell what is excatly happening.
    Please change the number range define for confirmation then try again.
    Please check T. Code SM21, SM22 and SM13
    Check the link below:
    Re: Me21n after saving Update Terminate Error Coming
    Check the 'Update debuggiing ' option from menu
    Regards,
    R.Brahmankar

  • Is there any user exit after saving the material doc

    Hi,
      Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
      thanks,
    lance

    Hi
    Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
    Regards
    Ramakrishna

  • Problem: after saving endtitle gets unreadable

    Hey there,
    I have a problem with the endtitle.
    It rolls from the right side to the left side. If I watch it in Premiere it looks very well,
    but after saving the movie as an mpeg-file the quality of the movie is great but the endtitle
    looks terrible...what could be a reason and how can I make it look better?
    Thank you!

    Yes, if one uses the Title Animation Presets, the Duration of the Title affects the speed of the Animation.
    As the Title Animation Presets do not offer much control, other than that speed/Duration, mentioned above, I normally use the Fixed Effect>Motion>Position, to "animate" my Titles. This gives me ultimate control, and will even allow me to do things like "pause" a Title, within the animation.
    I also normally use an old "rule of thumb" by keeping the Title on-screen to give the viewer time to read it 1.5 times, and also use large, bold san-serif fonts, with good contrast in both density and color, for ultimate readability.
    Most of my Projects are SD to start, with DVD-Video being the ultimate output, and my Titles look great on an SD CRT TV, and with a good, up-rezzing DVD, or BD player, quite good on an HD TV.
    Now, with an MPEG output, quality, and especially regarding motion (what you have with an animated Title), much will depend on the Bit-Rate of the output file.
    For playback on PC's, it sounds like you are creating a DVD-Data disc (not a DVD-Video), with just the MPEG file. Is that correct?
    Good luck,
    Hunt

  • I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?

    I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?
    There is any way to let one page of the final pdf exported file editable?

    Hi there
    You haven't seen any replies because you posted this to the Captivate forums. Hang tight and I'll move it over to the InDesign forums where it may gain some traction.
    Best of luck in finding a solution! Rick

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Document number....posted in T Code F-53 is not popping after saving

    Hi,
    I am posting outgoing payment in new fiscal year 1.4.2014, in F-53. After saving the document, I am not getting the pop up message:
    "Document number .... posted in T Code F-53.
    But when I check the GL line item in FBL3N, the document number is visible there.
    Please advice what can be the reason.

    Hi,
    I didnt check with other users. But I am facing this issue. May I know how the Security guy can help me and how its related to my authorization, since until yesterday everything was working fine.
    Kindly advice, is there any link to the year end closing activity?

  • Could someone help me figure out why after saving a form some subforms are hidden again

    I am asking this on behalf of a coworker.  We have a form she is working on with a drop down (ddlDropDown) with 1, 2, and 3 listed (same values,,1,2,3)  That trigger hidden subforms to appear (Employee1, Employee2, Employee3).  Initially, Employee1 is visible.  If form user selects 2 or 3 in the dropdown then Employee2 and Employee3 become Visible.  Once the form is filled in, saved, closed and reopened Employee2 and Employee3 are hidden again even though the dropdown says 2 or 3.  The script behind the dropdown's change event is:
    subSELECT.Employee1.presence=this.rawValue==1?"visible":"hidden";
    subSELECT.Employee2.presence=this.rawValue==2?"visible":"hidden";
    subSELECT.Employee3.presence=this.rawValue==3?"visible":"hidden";
    I have tried adding this code to the form's initialize, docReady, preOpen, postOpen, layout:ready events but it still doesn't work.
    Any ideas?

    Here is a sample I created based on your comments and it works just fine for me after saving the form.
    Employee2 and Employee3 subforms have their presence property set to hidden.  I have the script in the exit event of the dropdownlist.
    Here is the sample:
    https://workspaces.acrobat.com/?d=YWMOMIyD2lLEqPSdO0vqYQ

  • In Sales Order form populate charges field after saving the Sales Order

    Can we populate Charges field in Sales Order form after saving the sales Order automatically.
    The charges to be calculated based on the amount entered and the item selected in Sales Order.
    In the Manual process it is done by hitting the Actions Button and then select the Charges.
    The charge type would be "Freight Costs"

    by using process_order API, I am able to update the charges field.

  • BADI / User Exit after Saving of Business Partner

    Hi Experts,
    Is there a BADI / user exit that is triggered after saving / updating of Business Partner using transaction code "BP"?
    We want to send a XML file thru ALE after creation/modification of BP. We are using CRM WinClient 4.0.
    Thanks.

    Hi Mikhail Khorpyakov,
    Thank you very much for your reply. It was a helpful answer.
    BUPA_GENERAL_EXPORT is triggered before database update of table BUT000 and other related tables.
    Is there a BADI that is called after saving which contains general data of business partner?
    Thanks in advance..

  • I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

    Can anyone help with this - do I have to uninstall Reader and then reinstall?

    I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

  • Bug Report:  "View PDF After Saving" Does Not Work When Saving as Photoshop PDF

    The saved PDF file is not opening in Acrobat after saving a file as a Photoshop PDF. I noticed it happening a few times in earlier beta testing, but today it happened again.
    I have Adobe Acrobat Pro 10.1.2 installed on MacPro with Lion OS 10.7.3. Photoshop public beta m415.  System info can be provided if needed.
    The file I was trying to save was about 8 MB. Once it failed to open after save, I tried varied PDF settings and save locations. Also tried several different files. All were saved properly as PDF files, but would not continue to open in Acrobat as previous versions have done. The files open properly when you click on the file names in saved location.
    3153152
    3153152

    I'm happy I could help and feel a bit proud to have found a real bug. The simplest work around is just clicking on the file list once it's done...that's certainly not a problem.
    Larry
    =====================================
    Larry Guyer
    A la Carte Digital Studios
    Archetype Digital Imaging Alliance
    P.O. Box 4365
    Foster City, CA 94404-0365
    650-348-2525   office
    323-372-1669   fax
    650-444-7100   cell
    www.alacartedigital.com
    www.archetypeimaging.com

  • Front Panel objects do not stay in place after saving, closing, and reopening the VI.

    I have been working with a couple of versions of a main VI. The original VI was given to me so that I could add additional functionalities to it. I had been designing the front panel of the latest version of the VI on a Dell laptop running Windows 7 and LabView 2011 SP1 using a monitor with a resolution of 1920x1080. My booleans, numerics, and plots on the front panel had always stayed in place after saving, closing, and reopening the VI. Once in the field, I connected my laptop to a cRIO9073 and used my laptop screen with a resolution of 1366x768 to operate the VI. I made some changes to the VI, saved it, and reopened it. This time I noticed that the front panel objects had become overlapped, resized, and generally rearranged. I tried fixing the objects but I noticed that they reverted back to the incorrect positions after saving and reopening the VI. I was successful in keeping the objects in position a couple of times, but when I would open the VI at a later time, the objects were again rearranged. This is happening on both my monitor and laptop screen. The original version of the VI, however, does not behave this way and I have opened it on both my monitor and laptop screen. In this version, the front panel objects always stay in place. Both VI's have the same window size properties. Could I have corrupted the latest version of my VI somehow? Below are screenshots of the front panels of both VI's.
    Attachments:
    Blender Controller Original.PNG ‏140 KB
    Blender Controller.PNG ‏203 KB

    Hi Miguel,
    It is possible to programmatically set or change the position of front panel objects. (for example: http://digital.ni.com/public.nsf/allkb/4D0DA06B431​95B3F862572F3000AF2D3?OpenDocument) However, if you haven’t intentionally done that, it seems unlikely that it is the problem.
    Have you tried copying the entire block diagram in to a new VI to see if the problem persists? While it is unlikely, you are right that it is possible for VIs to become corrupted. I’ve never heard of a situation like this except in the situation where the settings Tom had you check have been changed. Here is some information about those settings:
    http://digital.ni.com/public.nsf/allkb/7567EF257B9​CFDF986256F630073228F?OpenDocument
    Since there was no rearrangement when you copied the front panel to a new VI, you might try copying the block diagram a little bit at a time to see if there is some particular part of it that creates the problem somehow.
    K. Johnson

Maybe you are looking for