COPA Assessment-Creation of set

Hi,
I want to apportion the Administration ,S &D etc expenses over the Material  which has been sold. In COPA report corresponding value fields have also been created.
Now when I Go to Assessment Cycle sender/receiver tab, i want to select product as receiver. But want to select only FERT items. I just cannot give the existing range of items which is whole material master I want to create the Group of Fert items. I tried to create a set (T code GS01) using table S039 and field name as MTART and defined value as FERT. But in assessment, I am not able to select the set I have created.
What is the correct way to create the set? Or is there any other way to create the Group of FERT items which I can use in assessment?
Requesting to guide me
regards,
makrand

Hi,
Instead of going for creation of Sets, U better to go for "Material Group". Whatever the materials you want to consider, maintain some value in the "Material Group" field in the concerned Material Master Records. and then select that material group as receiver in the Assessment Cycle.
Hope this will work...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Jan 30, 2009 7:05 PM

Similar Messages

  • COPA Assessment Cycle-USer Setting instead of Config

    Is it possible to make creation of assessment cycle as a user setting instead of configuration so that it does not create transport request and need not to be configured everytime.
    Thanks

    Hi Deepshika,
    Normally creation of cycles is a configuration and we will not be able to create cycles in testing and production clients (which are in non-modifiable status).
    But pls refer to SAP Note 326080 released on 20.02.2009 which will enable us to create cycles in testing clients also...
    Hope it will help you...
    Srikanth Munnaluri

  • How to analyse the Receiver Tracing Factor in COPA Assessment cycle -KEU5

    Hi
    While executing the COPA Assessment cycle,we will get receiver tracing factor.My client wants to know how we got that.How can i analyse that Receiver tracing factor?Kindly advice me...
    How can I recalculate the tracing factor for assesstment?
    For example, Actual Assessment Cycle RS_A01 under Segment ITCMFG2AD uses Variable Portions Rule for Receiver tracing Factor with Value Field of 62 Sales.
    The intent of this assessment was to be allocated based upon sales dollar values however when I review the test calculation, it appears the tracing factor is in billions of dollars when our monthly sales are in the million of dollars range.
    Supriya

    Hi,
    If Receier Tracing Factor Rule is Variable Portion, then please also check the Receiver Weighting factor (the last tab in the assessment cycle, it normally is 100 for the receivers.
    Secondly also check if there is different currency setting in CO Area & the Operating Concern which translates into different figures.
    Hope this works.
    Regards
    Saket

  • COPA Assessment Cycles

    Hi Guru,
    I really need some help with setting up COPA assessment cycles in 6.0.  I have used the best practice guides but unfortunately they were to lazy to be thorough.  I am using transaction code KEU7 to create the cycle.  I have attached a few segments to the cycle and added the sender/receiver (cost centers, companycode) details aswell. I checked it before saving the cycle and i got no error messages.  Now when i execute the cycle through tcode KEUB i get errorr/warning messages saying that "no valid sender entries found" and "this segment does not contain any senders".  I am not sure what i am missing and what i may be doing incorrectly.  Can someone please help me understand how to rectify this issue.  I am extremely generous with rewarding points!!!
    Thanks in advance,
    Shaun

    Hi Smith,
    Basically we created copa cycles in KEU1 and execute through KEU5.Find that recivers are product hi-erarachies, In our orgainisation  Corporate oh are be charge to products through copa cycles.
    Coming to your problem,When ever you define new copa cyle you find the error in differet ways.
    1) NO VALID SENDER FOUND  for segment means, Go to the segment there is an button ie consistancy chek box.Click on the check box System returns relavant segment.Observe that segment contains valid senders and revicers are produtc hierarachies or not.
    2) Other wise go to the segment and clik on find button, give the cost center, cost elements.Observe secondary cost elements and rules.
    3) other wise you can directly execute the co-pa cycle and click on segments.Here you can easily find that sender contains valid recivers or not.Basically these kind of error message will appears still now there is no Transaction passed to that products..
    I hope you understood.
    Regards
    Maruthi

  • COPA Assessment issue

    Hi
    I have set up a COPA Assessment (KEU1) using "variable portions" as the tracing factor. However, when I go to execute the assessment (KEU5) I get an error message GA733 "The segment contains no receivers". However, I have set up my receiving characteristics and value field correctly and do no see where there could be a problem.
    I have checked OSS Notes 61370 and 180993 but neither seems to resolve this.
    Has anyone had this problem before, or know of a resolution?
    Many Thanks

    There are two more notes 97087 and 128538. You may want to check them as well, provided they apply to your release.

  • How to find the receiver tracing factor in COPA assessment

    HI,
    how to  find out the receiver tracing factor in COPA assessment.Kindly help me the logic to anylise.
    Thanks
    Supriya

    Hi,
    If Receier Tracing Factor Rule is Variable Portion, then please also check the Receiver Weighting factor (the last tab in the assessment cycle, it normally is 100 for the receivers.
    Secondly also check if there is different currency setting in CO Area & the Operating Concern which translates into different figures.
    Hope this works.
    Regards
    Saket

  • COPA Assessment Cycles and FI Period closing.

    Hi Gurus,
    I have question related to the COPA Assessment cycles.
    We have closed the FI Period 03 and running the COPA Assessment cycles. while running the same, for few of the assesment cycles are completed and for the rest of the few  cycles it is error out stating the Period is closed.
    Why it is running successfully for few cycles and why it is complaining for Period closing for the others. We are on ECC 6 Version of SAP.
    Error out cycles contains Cost accounts and Asset Account GL Accoutns.

    Hi:
    If your CO allocation has some external postings (like GL or fixed assets) or generating some intercompany documents, then it needs FI to be open also. It happens sometimes if the allocation goes external so it would need fI period to be open also. If FI is close but CO is open, it would only work for CO specific allocations and others would error out.
    Please check the cycle/segment which is in error. If it is suppose to hit FI, then FI (OB52) and CO (OKP1) periods should be in sync.
    Thanks.
    Rahul

  • Value Transfer through Characteristics in COPA Assessment

    Dear All,
    Here I am getting one issue regarding Revenue doubled in COPA Reports, not matching between FI & COPA reports because of SD condition types problems some of billing documents posted double revenue in COPA reports.
    Now I want re-post extra revenues from Product/Customer Characteristics to Dummy Characteristics, how to solve this issue.
    I tried in COPA Assessment, but not possible because senders only Cost Elements or Cost Centers.
    My requirement is at month end we have to run TDD (Top Down Distributions) with reference of Actual Revenue. If I run TDD entire COPA report will show wrongly.
    How to solve above issue please help me.
    KBR

    Hi Reddy Anna
    How can double amount get posted in COPA alone and not in FI? Please check that
    May be you are seeing double because you are displaying both currency types in COPA report (Op Conc and Comp Code)
    However, if its truly genuine double amount, reverse the document and repost after making corrections in SD Pricing procedure.. Use KE4S
    br, Ajay M

  • CO period locked - can we unlock period and do COPA assessment?

    Hi Friends,
    CO period has been locked for last month, but some of the cost center assessment to COPA has not been carried out last month, resulting in amount lying in cost center itself.
    Could you please let me know whether we can unlock last month in CO through OKP1 and perform CC assessment to COPA now through KEU5? What impact or issue it would create if we unlock and perform COPA assessment now.
    Thanks in advance for your help.
    Regards,
    Dwarak.

    Hi,
    That's purely dependent on your business requirements. If the client wants to keep the period closed as he already published the financial figures, he might not be happy of having some updates afterwards. So, every opening of the period should be authorized by him. There are no technical aspects in this issue.
    Regards,
    Eli

  • COPA-Assessment cycle KEU5

    We have run cost center -assessment cycle for a cost center group and all the cost of the profit centers are distributed to respective costcenters.And now we goto COPA-Assessment cycle KEU5 and run the cycle for the cycle with same cost center group as sender.
    System posts a difference amount of positive amount in the credit side of each costcenter of that group.Which reduces the credit value and shows in over/under absorption.
    Please suggest where from the system is finding the difference when all the costcenters are with zero value as cost is distributed thru CCA assessment cycle.What differences will a cycle run in co-pa determine.Please suggest.

    Hi,
    Actually, the Sales overhead and Corporate expenses which are captured in the Cost Center shall be allocated to the COPA. All other expenses captured in other Cost Centers shall be allocated to the Production and shall be absorped into the products manufactured. Hence, the same Cost Center shall not be used as sender in both the cycles. If we use like what you described, it will definitely result in over absorption that is more credits. Hence, please describe why need to add the same Cost Center group in both the CC cycle and Copa CC cycle.
    Trust this helps much!
    Cheers!

  • Posting - COPA Assessment Cycle

    Hi
    when i am trying to run KEU5 for period 12 for the previous fiscal year,the system is posting (with warning)but when i am running for period 1 for this fiscal year,the system is not posting.Can anyone please help me out.
    Whether any fiscal year change over or period end/year end activity has to be carried out for the COPA ASSESSMENT CYCLE.
    Appreciating for the help extended.
    Thnx & Regards
    Pran

    praveen,
    please check have u maintained fiscal year for the new year in fi and co
    sateesh

  • COPA assessment-reciever profit center

    Hi there,
    If in receiver of copa assessment cycle profit center being one of the receiver, will profit center get a debit and i will be able to see the cost in profit center/ or the segment consisting of profit center and other receiver will get a debit?
    Thanks
    Deepshikha

    Hi,
    Here i will explain you clearly.
    e.g Cost center 1000 and assgined to profit center 1000
    and your assessing to profit center 2000
    you booked actual cost $9000 to cost center 1000 and profit center 1000
    when you assess the posting like this
    Cr:$9000 to CC 1000 and PC1000
    Dr:$9000 to PSG and PC2000
    postings are going to be in PCA also.
    Hope this helps you.
    Thanks,
    Rau

  • COPA Assessment Cycle

    Hi,
       I prepared one copa assessment cycle(T.code : KEU1) with a receiver type -Variable portions / Revenue with Billing type (F) . When i run the COPA Assessment cycle , i got a message that no sender values found. I created some revenue entries in the period 12 and some Cost center related expenditure.
      I prepared another cycle with receiving type as fixed amounts. When i run the KEU5 , The values are perfectly flowing.
      Any inputs on this. Thanks in advance.
    Thanking You,
    D.K.Lakshmi Narayana

    Hello Pran,
    With reference to your Error
    1) Please check the value of Sender. I think it is 0.
    2) In second case please add the reported GL in allocation structure KF which you are using.
    Hope this will help you.
    Regards,
    Pawan Kumar

  • COPA Assessment cycle + OKP1

    Hi,
    As part of month end activities, OB52 and OKP1 were closed for last month.
    But still COPA assessment cycle is not completed.
    Pls. let me know if they need to be opened again for executing the assessment cycles.
    Thanks,
    Sridevi

    Hi Sridevi,
    Goto OKP1 T.code and open transaction "Assessment to CO-PA" for particulare period and execute Assessment cycles for COPA and  Goto OKP1 T.code and close transaction "Assessment to CO-PA" for previously open period.
    Hope this helps you.
    Thanks,
    Rau

  • COPA Assessment cycle run KEU5

    What all  can be as a Reciever in COPA Assessment cycle.Why is COPA Assessment cycle run KEU5.

    Hi,
    What all can be as a Reciever in COPA Assessment cycle.
    ..this is [documented|http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c48c64a0111d1894c0000e829fbbd/frameset.htm] in help.sap.com. As per [rules of engagement |/thread/931177 [original link is broken];pls. search before posting
    Why is COPA Assessment cycle run KEU5.
    ...no idea what you mean. Pls. explain.
    Regards
    Karl

Maybe you are looking for