COPA extraction is taking too much time

Hi,
We are extracting data from R/3 by using COPA data Source with Delta update. It is taking 3 -4 hrs time to extract around 3000 records.
In the Job log:
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 2,535 records
Between these two statements 3hrs is taking.
Can anyone help to solve this .
Thanks in Advance
Chetan.

Try a smaller set of data .. like one day if you can. Also look at what else is happening in the system (SM50/SM51/SM66). If you are running in the middle of the day while someone else is running a big job, that could severely slow down a small system.
Also, the COPA datasets are usually very wide and contain a lot of data. You could potentially be going out and gathering a few gig of data ... which will take awhile.
Also, look at transaction KEB2 and make sure there are no errors (you may have to scroll down very far to find an error). Also, simulate it with KEB5 and see how fast it goes through that transaction.
The key is to let it do it's work. If you see nothing happening and cancel the job or start a new one, you have corrupted the queue and need to let everything finish running .... then reinitialize. I did this once .... restarted, waited 10 minutes ... nothing .. cancelled job, restarted again .... etc...
It wasn't until I walked away for a day and came back on a Saturday to reinitialize that everything went smoothly and quick.
Brian

Similar Messages

COPA based Dashboard taking too much time...

Dear All,
I have created two DataSources for COPA (1st. 1_CO_PA1001000 Fields: 307    2nd. 1_CO_PA600210913 Fields: 139) and I have four years of historical Data and my Data Flow is like: DataSource ---> DSO ---> InfoCube. Following is the Transformation for Time Between DSO and InfoCube: Rule Type is Direct Assignment
DataSourceObject: Fields
Target: IO InfoObject
0CALWEEK
0CALWEEK
0CALDAY
0CALDAY
0CALQUARTER
0CALQUARTER
0CALQUART1
0CALQUART1
0FISCYEAR
0FISCYEAR
0FISCVARNT
0FISCVARNT
0FISCPER
0FISCPER
0BILL_DATE
0FISCPER3
My dashboard is taking about 20 minutes to execute and it is taking so much time to my liking.
I have dropped the Data of InfoCube and reloaded the Entire data with following changes to Transformation For Time Between DSO and InfoCube:
DataStoreObject: IO
Target: IO InfoObject
0CALDAY
0CALWEEK
0CALDAY
0CALDAY
0CALDAY
0CALQUARTER
0CALDAY
0CALQUART1
0CALDAY
0FISCYEAR
V6
0FISCVARNT
0CALDAY
0FISCPER
0BILL_DATE
0FISCPER3
1. I'm already using Aggregates and Collapse function for the better performance. Now, what should I do to get the performance right?
2. How to resolve the issue of performance for COPA datasource or Data flow?
I will appreciate your reply.
Many thanks!
Tariq Ashraf

Hello Gajesh,
Once more thank you so much for your prompt detailed reply.
You asked how man queries being used in Dashboards and these are 8 queries.
1. What do you mean by number of connections in your reply?
2. How can we build our dashboard with only two queries?
3. We are not using BEx Query as Data Source for Dashboards instead we are using Universe
   which is created on top of an Multi-Provider and this Muli-Provider is based on (Five COPA
   InfoCubes Bifurcated by Transaction Type and have four years of Historical Data).
4. Why we have not used BEx Queries as the prompts of BEx queries can not get data from
   Dashboard Excel, only option is use as "Prompt Selector".
5. Please see below details of InfoCubes:
   InfoCube 1: COPA-Cube for 1000(F-type B0)
   KeyFigures: 200 Characteristics 50
   It has Aggreates and its compressed
   Approximately Number of Records: 3,832,922
   InfoCube 2: COPA-Cube for 1000(G-type B0)
   KeyFigures: 7 Characteristics 46
   It has Aggregates and its compressed
   Approximately Number of Records: 250
   InfoCube 3: COPA-New Fields Cube for 1000(F-type B0)
   KeyFigures: 9 Characteristics 44
   It has Aggregates and its compressed
   Approximately Number of Records: 280,860
   InfoCube 4: COPA_Cube for 1000(C-type B0)
   KeyFigures: 60 Characteristics 42
   No Aggregates no compression
   Approximately Number of Records: 11,000
   InfoCube 5: COPA-Cube for 1000(D-type B0)
   KeyFigures: 20 Characteristics 43
   No Aggregates no compression
   Approximately Number of Records: 28,000
6. Separate queries being used to calculate two years of data one for current and other for
   previous year.
7. How to split the data yearwise, should I split data year wise for all above five InfoCubes and for four years I will have 20 InfoCubes with each fiscal year data in different InfoCube?
8. What did you ask about BO Level Connections, we are using Universe on top of Mulit-Provider
   for Dashboards?
9. Above I have given you a snapshot of all COPA InfoCubes, now what should I do to make
   performance right, as there are number of Dashboards being created and designed on
   this COPA InfoCubes?
10.I want to make the performance tuned for all dashboards being at the safe side, but how do I proceed about it?
Many thank,
Tariq Ashraf

Taking too much time using BufferedWriter to write to a file

Hi,
I'm using the method extractItems() which is given below to write data to a file. This method is taking too much time to execute when the number of records in the enumeration is 10000 and above. To be precise it takes around 70 minutes. The writing pauses intermittently for 20 seconds after writing a few lines and sometimes for much more. Has somebody faced this problem before and if so what could be the problem. This is a very high priority work and it would be really helpful if someone could give me some info on this.
Thanks in advance.
public String extractItems() throws InternalServerException{
try{
               String extractFileName = getExtractFileName();
               FileWriter fileWriter = new FileWriter(extractFileName);
               BufferedWriter bufferWrt = new BufferedWriter(fileWriter);
               CXBusinessClassIfc editClass = new ExploreClassImpl(className, mdlMgr );
System.out.println("Before -1");
               CXPropertyInfoIfc[] propInfo = editClass.getClassPropertyInfo(configName);
System.out.println("After -1");
          PrintWriter out = new PrintWriter(bufferWrt);
System.out.println("Before -2");
          TemplateHeaderInfo.printHeaderInfo(propInfo, out, mdlMgr);
System.out.println("After -2");
XDItemSet itemSet = getItemsForObjectIds(catalogEditDO.getSelectedItems());
Enumeration allitems = itemSet.allItems();
System.out.println("the batch size : " +itemSet.getBatchSize());
XDForm frm = itemSet.getXDForm();
XDFormProperty[] props = frm.getXDFormProperties();
System.out.println("Before -3");
bufferWrt.newLine();
long startTime ,startTime1 ,startTime2 ,startTime3;
startTime = System.currentTimeMillis();
System.out.println("time here is--before-while : " +startTime);
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --new: " +startTime1);
bufferWrt.write(aRow.toCharArray());
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
startTime3 = System.currentTimeMillis();
System.out.println("time here is--after-while : " +startTime3);
               out.close();//added by rosmon to check extra time taken for extraction//
bufferWrt.close();
fileWriter.close();
System.out.println("After -3");
return extractFileName;
catch(Exception e){
               e.printStackTrace();
throw new InternalServerException(e.getMessage());

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
            while(allitems.hasMoreElements()){
            String aRow = "";
                XDItem item = (XDItem)allitems.nextElement();
                for(int i =0 ; i < props.length; i++){
                     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

ODS to CUBE load taking too much time..

Hi all ,
we are loading the data from our ZODS to ZCUBE, but the data load is taking too much time , we haven't created any indexes , we alsotried by making infosource for the ODS but still tha same problem .. It is always showing 0 from 345674 records that is the records are not getting extracted from ODS .
Can anybody help me in this regards , it is a bit urgent ..
Thanks in advance.

Hi,
there are a few you can check. First you should check if this job hasn't ended in a dump with ST22.
The next thing you can do, if the job doesn't end abnormaly, is to reduce the amount of records processed at the same time. Sometimes the system has trouble if the amount of records that it has to process is too large. Go to the InfoPackage -> DataS. Default Data Transfer -> Fill the maximum to 10% of de the default value. Try to run the load again.
If the job still doesn't finish then you have to check wether or not there are any ABAP routines and/or formula involved in the update rule ? Maybe they running in a loop.
regards,
Raymond Baggen
Uphantis bv

Job is taking too much time during Delta loads

hi
when i tried to extract Delta records from R3 for Standard Extractor 0FI_GL_4 it is taking 46 mins while there are very less no. of delta records(193 records only).
PFA the R3 Job log. the major time is taking in calling the Customer enhacement BW_BTE_CALL_BW204010_E.
please let me know why this is taking too much time.
06:10:16 4 LUWs confirmed and 4 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
06:56:46 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Asynchronous sending of data package 1 in task 0002 (1 parallel tasks)
06:56:47 IDOC: InfoIDOC 2, IDOC no. 121289649, duration 00:00:00
06:56:47 IDOC: Begin 09.05.2011 06:10:15, end 09.05.2011 06:10:15
06:56:48 Asynchronous sending of InfoIDOCs 3 in task 0003 (1 parallel tasks)
06:56:48 Through selection conditions, 0 records filtered out in total
06:56:48 IDOC: InfoIDOC 3, IDOC no. 121289686, duration 00:00:00
06:56:48 IDOC: Begin 09.05.2011 06:56:48, end 09.05.2011 06:56:48
06:56:54 tRFC: Data package 1, TID = 3547D5D96D2C4DC7740F217E, duration 00:00:07, ARFCSTATE =
06:56:54 tRFC: Begin 09.05.2011 06:56:47, end 09.05.2011 06:56:54
06:56:55 Synchronous sending of InfoIDOCs 4 (0 parallel tasks)
06:56:55 IDOC: InfoIDOC 4, IDOC no. 121289687, duration 00:00:00
06:56:55 IDOC: Begin 09.05.2011 06:56:55, end 09.05.2011 06:56:55
06:56:55 Job finished
Regards
Atul

Hi Atul,
Have you written any customer exit code . If yes check for the optimization for it .
Kind Regards,
Ashutosh Singh

Delta Sync taking too much time on refreshing of tables

Hi,
I am working on Smart Service Manager 3.0. I have come across a scenario where the delta sync is taking too much time.
It is required that if we update the stock quantity then the stock should be updated instantaneously.
To do this we have to refresh 4 stock tables at every sync so that the updated quantity is reflected in the device.
This is taking a lot of time (3 to 4 min) which is highly unacceptable from user perspective.
Please could anyone suggest something so that only those table get refreshed upon which the action is carried out.
For eg: CTStock table should get refreshed only If i transfer a stock and get updated accordingly
Not on any other scenario like the changing status from accept to driving or any thing other than stocks.
Thanks,
Star
Tags edited by: Michael Appleby

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
            while(allitems.hasMoreElements()){
            String aRow = "";
                XDItem item = (XDItem)allitems.nextElement();
                for(int i =0 ; i < props.length; i++){
                     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

Performence?? pulling billing # with sales doc #, taking too much time???

Hi Experts,
Am looing to pull vbrp-vbeln i.e. billing doc #, based on the VGBEL i.e. sales doc #
i.e.
select single * from vbrp into wa_vbrp
where vgbel = wa_vbap-vbeln
and posnr = wa_vbap-posnr.
but, as there is no secondary index in vbrp for vgbel and there r tonns of recs in vbrp, its taking too much time?
so, wht is the alternative that i can find billing doc # with my sales doc #?
thanq

Mr. Srinivas,
Just a suggestion, if you need only the header details, then why not extract data from VBRK (header for billing doc) & VBAK (header for sales doc). These 2 tables contain only single line per billing or sales doc & hence the performance should be better.
If my suggestion is not what you are looking for, then apologies for the same.
Regards,
Vivek
Alternatively as Mr. Eric suggests, you can use VBFA
VBFA-VBELN = VBRK-VBELN
VBFA-VBELV = VBAK-VBELN
Logic is VBFA-VBELN is the subsequent document & VBFA-VBELV is the preceding document.
Hope it helps. (but be sure, the document created after sales order is billing document, there might be cases where there could be delivery documents after sales order & before billing document, so be careful)
Edited by: Vivek on Jan 29, 2008 11:11 PM

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Taking too much time in Rules(DTP Schedule run)

Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sree

Hi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

COPA extraction is taking too much time

Similar Messages

Maybe you are looking for