COPA extraction issues - Incorrect field name for selection

Dear gurus,
I've issues with my COPA extraction, hope you guys could give me some clue here, point will be rewarded if I could fine the solution.
Requirement:-
To add additional field.
Step:-
As usual 1) Delete
2) Create back with select the new field. (KEB0)
3) Do not have issues when check RSA3 from DEV, but when transport to QAS I hit this issues.
Issues:
At RSA3 , when do check hit the error, "Errors occurred during the extraction"
When check from RSA3 log here I get..
** Did try to find any solution in SCN forum, with no luck. Hope get some help here.
thank you
rgds
Edi.

Yes I did get this feedback ..
Hi Edi,
As per the standard SAP, once you have assigned characteristics and values fields to your operating concern (KEA0), you can't de-assign them. When characteristics or values fields are in assigned status, you can't delete them.
But I hope there won't be much problem of having that characteristic also. If you look at performance wise, then instead of deleting, make "not used" under profitability segment characteristics, remove from the characteristic groups etc. While doing so, please check any derivation rules written based on these, or any assessment cycles defined with these also..
Regards...
Jose
forward to my FICO ..

Similar Messages

Table name& field name for production order & operation confirmation

Hi All,
          I would like to know the table name and field name for the production order "confirmation" (CNF) and the operation confirmation (CNF).
Thanks and Regards,
PSS

Hi there,
CORU(R/3 Application development: PP Confirmations )
AFFW      Goods movements with errors from confirmatio
AFRC      Table of planned changes to conf.: Automatic
AFRD      Default values for collective confirmation
AFRH      Header information for confirmation pool
AFRP1      Table of planned changes to conf.: Automatic
AFRP2      Table of planned changes for confirmation: B
AFRP3      Table of planned changes for confirmation: C
AFRP4      Table of planned changes to confirmatn: Data
AFRU      Order completion confirmations
AFWI      Subsequently posted goods movements for conf
TAFWD      CORU: Messages that are not interpreted as e
TCORD      Table for field-dependent check routines
TCORU      Parameters for order confirmations
TCORV      Table with Routines for structureing variabl
TCORW      Confirmation: Window Control
TPARU      Control parallelized confirmation processes
TPRRU      Control table for process chain for confirma
TPRRUT     Text table for process control of confirmati
TRUGS      User status caused by deviation
CO(R/3 Application development: PP Production orders )
AFBP       CIM order: Batch print requests
AFFL       Work order sequence
AFKO       Order header data PP orders
AFPO       Order item
AFVC       Operation within an order
AFVU       DB structure of the user fields of the opera
AFVV       DB structure of the quantities/dates/values
FAPW       Index of production-/issuing plant for produ
FTIND       Missing parts index
ORDCOM      Communication control Operation download
T024F       Production scheduler
T399X       Parameters dependent on order type
T441C       Profile - availability check
T441CT      Texts for Profile "Display Availability Chec
T490       Transactions PP - orders - order category
T496B       CIM order: Assigning document types to refer
T496D       CIM: Destination/lists/spool parameters per
T496F       CIM order: Form description of the list
T496K       CIM order: Entity table of possible table id
T496N       CIM order: List descriptions
T496P       Print PP documents: Determination of output
T496R       Print PP shop papers: Report control
T496T       Print PP shop papers: Transaction control
T496V       PP Print: Default Value for Printing Online
T496Z       CIM order: Table-controlled table access
TC32       Assigning subscreen to processing location
TC34        Allocating operation to object type for the
TC62        Sequence of detail screens when processing h
TCO01      Sequence/operations control in logicstics or
TCO03      CIM order: Texts for TCO01, Description of o
TCO04      Table for controlling the screen sequence gr
TCO05      CUA status depending on panel, trans. type,
TCO06      Exclusive functions for PP orders
TCO09      CIM order: Text IDs of objects in orders
TCO10      Valuation variant for order costing
TCO11      Control table for production orders - availa
TCO12      Control table production orders - stock dete
TCO36      PP orders: Control table for calling up pop-
TCO41      CIM order: Default values for generating ope
TCO43      PP-SFC order profile
TCO43T      Description of production scheduler profile
TCO60      Sequence keys for input facility and verific
TCO61      Sequence key for PP orders
TCO62      Defining screen sequences for input facility
TCO63      Sequence of detail screens when maintaining
TCODB      Database fields development class CO per ord
TCOF        Profile for missing parts info system
TCOFF      Profile for Missing Parts Info System: Displ
TCOFFT      Texts for Missing Parts Info System: Display
TCOFG      Profile for missing parts info system: crite
TCOFGT      Texts for Missing Parts Info System: Criteri
TCOFK      Texts for functions in milestones/trigger po
TCOFS      Profile for Missing Parts Info System: Sort
TCOFST      Texts for Missing Parts Info System: Sort Cr
TCOFT      Texts for Missing Parts Info System
TCOKO      Constants for PP orders
TCOKT      Account assignment categories for order
TCOP        Field selection profile
TCOPS      Field selection profile
TCOPT      Description of Profile for Field Selection
TDUMMY      Dummy structure of a table for READ with VER
TRUG        Reason for variances in completion confirmat
TRUGT      Text describing the reason for a variance in
TXPR1      XPRA control - missing parts info system
Regards
Hemant G

What are the field names for below mentioned

Hello Friends
What are the fields names for below tables
in EKKO
Purchase Document Date
Net Value of the purchase document.
In EKPO
Item Description
From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
How many tables involve her to build this report. and also field names, they come under which table.
Please send me this information ASAP. PLz Plz Plz..........
Regards
Praveen

You can check the fields of these tables via SE11
Purchase Document Date - EKKO-BEDAT
Item Description - EKPO-TXZ01
Net price per item - EKPO-NETPR.
Regards,
Rich Heilman

Table and Fields names for following

Hi All,
1. What is the Table&Field Name for finding out Program Type[Report/Module pool etc..] of a Program!
2. Is there any Table&Field Name for Transport Request Name. We need to find out TR Name Based on Program name.
Can anybody solve above issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In TRDIR table specify the NAME as report name and SUBC is teh field whic gives u the report type.
1 Executable program
I INCLUDE program
M Module pool
F Function group
S Subroutine pool
J Interface pool
K Class pool
For the second one
Table name > RSEUMOD
Hope this solves ur query.
Message was edited by:
 Judith Jessie Selvi

Table names and field names for the PO item details

Hi,
I want table names and field name for the below fields.
I have PO number i want to get below fields for PO.
Confirmed Ship Date (or actual ship date if already shipped) PGI Date
Quantity of Product to be shipped (base unit of measure) Sales Order Qty
Shipped Quantity of Product (normally zero)
Shipped From Plant Name
Excellent reward is compulsary.
reagrds,
vijay

Hi,
Please find below the some of tables and fields for the PO. But from your query hope you are refering some other PO.
Table : EKPO
Fields
KTMNG - Target Qty
MENGE - Open Qty
WEPOS - Goods Receipt
LEWED - Latest GR date
Table : EORD
Fields
RESWK - Procurement plant
FRESW - Fixed Issuing plant
LIFNR - Vendor
FLIFN - Fixed vendor
Regards,
BK

What makes a field eligible for selecting data in a subreport?

Hello,
I have posted the following question to [StackOverflow|http://stackoverflow.com/questions/4366702/what-makes-a-field-eligible-for-selecting-data-in-a-subreport], but it has so far generated no replies. I decided to cross-post it here to see if I could get a better result.
The TL;DR of it is that I have a field which I should be able to link in my Subreport, but it does not appear, and I was wondering what I need to do to make it appear.
I have a Crystal Report I'm trying to recreate from scratch after an update from VS2008 to VS2010 caused it to implode horribly.
I've gotten most of the way through, but I'm at a stage where I'm linking a field in the Main Report to a corresponding field in the Subreport.
I have set up a bunch of Database fields in the Subreport, I've added the table I want, TableA, I've linked it up as everything was linked in the original report, with TableA at the head of the linking chain, so that all the rows I want can be derived from the result of that first query ( Actually, all of the links from the original Report were red in the Database Fields linking dialog, whereas mine are a bit rainbow-y. All the links in TableA are red, though... _ )
In the "Subreport Links" dialog, I have an integer which I know is being pulled from the database correctly. I've added it in the "Fields to link to" listbox, and selected the newly-created parameter in the "Subreport parameter to use" combobox. I've ticked the "Select data in subreport based on field" checkbox.
The database field I want to link to then does not appear in the second combobox.
Another integer field in TableA shows up fine in the "Select data..." combobox (and is linked to another field being passed in), so I don't know why these two integer fields, which are equally important, and exist on the same level, on the same table, are being treated differently by the report designed.
Any ideas what I'm doing wrong?

Here is what I'd do:
1) Download CR 2008 eval designer from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
2) Try the linking in CR 2008 designer
3) If it does not work there, ask why not in the [CR design|SAP Crystal Reports, version for Visual Studio; forum.
4) If you get the linking working in the CR 200 designer, try to run the report in your VS2010 app (after ensuring the report woks as expected in CR 2008).
5) If (4) above works out for you, please let me know as this may be an issue with CRVS2010.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Can I get field name of Selection screen ?

Hi, experts.
I'd like to manage PGM's screens & fields of screens. I need to know field names of selection screen in external PGMs to manage input values of those fields.
For values, I'll use 'Dynp_values_read', but what should I use for getting field names of selection screen?
Is there any functions, classes or tables for PGM's fields of selection screen?
I've found tables&functions for this and I found D020S, D020T, D021T for PGM's screen. But I counld't see proper field names that shows on a selection screen when I excuted PGM. I guess there's a conversion routine between data that saved in repository and field name on screen.
Please let me know what should I use a function, tables or else.
Thanks.

Hi
Use Read text pool syntax
READ TEXTPOOL program name
INTO T_TPOOL
LANGUAGE 'NL'.
within TB_TPOOL all select option field namees will be stored under field ID with type S
Edited by: Lavanya K on Apr 22, 2009 10:02 AM

Field names for the following information in Production planning (PP)

Hi Experts
I am BI consultant, and I need the field name for 'actual production quantity' in the PP module, and also what is the difference between - Actual production Quantity, Actual Component Quantity (0WITHDRWQTY), and Actual Quantity (0CONFIRM_QTY) in the PP module.
with regards
Ajay

Hi,
Please find the production order details in the below tables:
AUFK - Order Master Data
AFKO - Order header data PP orders
AFRU - Order Confirmations
AFVC - Operation within an order.
Hope it helps you.
Regards,
Alok Tiwari

What is the table name and field name for Street 2, street3 in Vendor mast.

Hi,
I have a BDC code for Vendor master. I just need to insert the fields street 2, street3, stree4 and street5 in the code. Can I insert it in the code directly without re-recording? If yes then what would be the table and field names for the fields mentioned above.
Thanks & Regards,
Sriram

Hi Sriram,
   Its a Configuration Setting to bring the Check box ask your SD consultant, else directly insert this try, change your internal table filed here,
PERFORM bdc_dynpro USING 'SAPMF02K'    '0100'.
PERFORM: bdc_field USING 'RF02K-BUKRS' indata-bukrs,
           bdc_field USING 'RF02K-EKORG' indata-ekorg,
           bdc_field USING 'RF02K-KTOKK' indata-ktokk,
           bdc_field USING 'USE_ZAV'     'X',------------------------>this part is check box
           bdc_field USING 'BDC_OKCODE' '/00'.
for street just try this without re-recording,
PERFORM bdc_field USING 'ADDR1_DATA-NAME1'       indata-name1.
PERFORM bdc_field USING 'ADDR1_DATA-NAME2'       indata-name2.
PERFORM bdc_field USING 'ADDR1_DATA-SORT1'       indata-sortl.
PERFORM bdc_field USING 'ADDR1_DATA-STREET'      indata-stras.
PERFORM bdc_field USING 'ADDR1_DATA-POST_CODE1' indata-pstlz.
PERFORM bdc_field USING 'ADDR1_DATA-CITY1'       indata-ort01.
PERFORM bdc_field USING 'ADDR1_DATA-COUNTRY'     indata-land1.
PERFORM bdc_field USING 'ADDR1_DATA-REGION'      V_regio.
PERFORM bdc_field USING 'ADDR1_DATA-PO_BOX'      indata-pfach.
PERFORM bdc_field USING 'ADDR1_DATA-STR_SUPPL2' indata-suppl2.
PERFORM bdc_field USING 'ADDR1_DATA-TAXJURCODE' indata-txjcd.

Table name and field name for accounting and material document in MM

Hi
Table name and field name for accounting and material document in MM
how can we diffreentiate the accounting document in MIGO and MIRO ?

Hi,
For Goods reciept documents you can search from the tables MKPF-Header: Material Document and MSEG-Document Segment: Material,
and for Invoice documents you can search in tables BKPF-Accounting Document Header and BSEG-Accounting Document Segment.
For differentiating the Accounting documents in MIRO and MIGO based on posting key and document types for GRN -document key is -WE and for MIRO document is -RE.......
Hope this may help you.....................

Required Field names for Creditor / Vendor Analysis.

Hi All,
i need to create a report for vendor analysis.
here i has no FN. Consultant at my client place.
i required field names that are to be considered to get TOTAL OUTSTANDING PAYMENT (as on due date and as on date)
for BSIK and BSAK.
Regards,
Srikanth.

Hi Srikanth,
Required Field names for Creditor / Vendor Analysis:
1) Company code
2) Vendor
3) Fiscal year
4) Days in arrears (pendays)
Here,
BSIK table shows all open items (both due and not due) and BSAK table shows all the cleared items for Vendors / Creditors.
Regards,
Kiran.

Field names for AP invoices

Hi All experts
I would like to have the table and field names for the below for vendor invoices header data and transaction data:
Digiscribe#
SAP Document #
Document Date
Vendor Name
Vendor ID#
invoice#
invoice Date#
Invoice Amount
Check#
Check Date #
Check Amt#
WBS #
Cost center #
internal order(i/o) #
profit center #
Thanks,
Rahul S

Thanks for the help.
From the tabled you provide,i am not able to fine Table name and field name for the below,
Digiscribe ID
SAP Document'
invoice date
invoice amount
check date
check amount
internal order (i/O)

How to find field name for BDC

Hi,
to find out the field name for BDC ,
1. press F1 for that field
2. click technical info
3. use SCRREN FIELD name given in Field desc for batch input.
NOw what to do if SCREEN field name in "Field desc for batch input." is not given...Even During BDC recording if we input values in those fields,values are saved in appropritae tables but not inn BDC recording fields

Hi again,
1. ABSOLUTELY Sure.
2. Container (Container Control)
   is nothing but an EMPTY control
   to place controls inside it.
    eg. Its a FRAME
    inside which, there are contros!
3. Container does not have any INPUT VALUE !
regards,
amit m.

How to add get the field name for a newly added site column.

I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>

So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
Regards

Hi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Technical Field name for Usage

Hi,
Could anyone please tell me whether there is any SAP standard field (technical) name & Segment structure for u201CUsageu201D for the automatic determination of Item Category.
More details:
User wants to send sales order through a non SAP application. So when the order comes to SAP through IDoc, I want the item category to be determined automatically. As you all knew, the rule for automatic determination of item category is Sales order type + Item cat. Group + Usage + HLevItCa. So I just need technical field name for Usage for XI mapping.
Is there SAP standard field for Usage just like we have field name (PSTYV) & segment structure (E1EDP01)for item category? Or it should only be achieved through any user exit? Could anyone ever done such setting? Could you please give me some inputs.
Thank you.
Regards, Sats.

HI
VWPOS - Item Category usage
Check using path
SPRO --> Sales and Distribution --> Sales --> Sales Document --> Define item Category Usage
Thanks & Regards
Edited by: WISH on May 17, 2010 12:13 PM

COPA extraction issues - Incorrect field name for selection

Similar Messages

Maybe you are looking for