COPA plan version

Currently, only version 0 is used for actuals and plan.  Again this year we have used version 0 for cost center planning, profit center planning and also COPA planning.  The user community would like to create a new version for COPA planning only to upload new data.  Can I have a different plan version # for COPA only for this year?  If so, how do I do that?  Does it impact the other areas of planning?
Thanks for your help!

Hi,
Did you checked infoobject 0version??
Just check it
I think it is of char 1.
Thanks
Ajeet

Similar Messages

  • COPA Planning to Profit Center Accounting

    Hi,
    We are using ECC 6.0.
    When we do COPA planning and transfer the values of COPA to Profit Center, no data has been transfered to profit center plan items.
    We have not activated Planning version of Classic Profit Center Accounting. Is it required for ECC 6.0 also to activate Classic Profit Center Accoutning?
    We have Mapped requisit Value fields of COPA to GL Accounts.
    Can any one guide us in this regard.
    Thanks in Advance
    Sudhakar

    Hi,
       In COPA the planning has been done to the value field of PRCTR which represents Profit center. Through report forms the actual and plan data for the value fields can be derived in COPA itself. I dont think that the planned values can be transferred to profit center accouting. On the other hand the actuals of profit center with the same value fields can be derived in COPA.
    Assign points if its useful
    Regards
    Kaarthik.D

  • COPA planning

    Hi
    Currenlty we do COPA planning through KEPM but we have an issue,  previously the plan values for revenue,  cost of goods sold freight charges etc were determined in the same way by the same distribution key,  however,  we want to plan the revenue for each period in the year a different way, therfore we want ot use a different distribution key.  So I created two different planning parameters sets one for the cost of goods sold and freight with one type of planning layout and distribution key and then I created another parameter set for the revenue and used a different planning layout and distribution key.       These posted how I wanted them to,  however they posted into different COPA planning documents.  Is there a way I can incorporate them into the same planning document but with different distribution keys, because when you look at the line item you now get two line items in planning.
    please advise
    thanks

    Hi
    You need to have 12 columns in your Plan Layout so that you can enter Plan values for each month in one go... You shoudl npt be concerned about the no of docs that the system would generate...
    You would analyse Plan Vs Actual in KE30 reports which is a summarized report.... Hence, in my opinion, dont press too much on the no of docs generated in the process
    If you generate 2 docs in another versoin and then copy to Version 0, you would end up generating even more no of docs
    br, Ajay M

  • KG843 Currency type does not match plan version

    Dear all,
    we try to set up a CO-PA-planning in company code currency CZK / our operating corncern-currency is EUR - in the operatin concern we have maintained currency EUR and we have set the flag "Company-code currency" (TA KEA0).
    As actual/plan-Version we use Version 0 with the following settings for operation concern: Currency type B0 (Operating Concern currency).
    Now we try to plan our CO-PA characteristics and value fields with TA KEPM. Therefore we have created a planning layout. Here we receive the error message: KG843 Currency type does not match plan versionThe planning layout (TA KE15) is set up like this:
    1. By creation of the layout we selected "Operating concern currency / Company code currency" because we would like to plan in CC-Currency
    2. In the General data selection I have selected currency type = 10 = Company code currence because we would like to plan in CC-Currency
    3. In the value field I selected Plan/Act. Indicator = 1 = Planning data and Version = 0
    Do you know why I receive message KG843 - or what can I do so that I am able to plan with currency type 10 and version 0?
    Thanks for a soon feedback.
    Best regards,
    XmchX

    Ok, here's what SAP help has to say about multiple currencies in COPA planning:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/7a/4c3d494a0111d1894c0000e829fbbd/frameset.htm
    Basically it says you have to define one version for OC currency and one version to use CC currency. Then plan in one version and copy to the other. Currency conversion will happen when copying.
    REgards
    Nikolas

  • COPA Planning Framework

    Dear Experts,
           I am doing COPA Planning Framework.
    First Step: Created Planning Level as Co.Code Sales Plan.
    Second Step: Created Planning Package as Co.Code Sales Plan for 2010.
    Now I am trying to create Planning method. But system automatically showing that Planning Level as Planning Method.
    Why it is like that?
    Then Should I need to create directly the Parameter Set?
    Pls correct me.....
    Regards,
    Balaji Bhonsle..

    Hi Balaji ,
    A planning layout consists of a header area and the lead and data columns
    Header Area
    One or more rows make up the header area of a planning layout. These rows display the global selection criteria for all the plan data that is displayed, or to be entered in the layout. The characteristic values in the header area (for example version, fiscal year) move within the limits that are set by the selection criteria in the planning package or level. They are valid for the entire planning layout. The header area can contain only characteristics, that is, no key figures. You can also build planning layouts that do not contain header areas. Usually, however, this will only be appropriate when you use very few characteristics and especially when very few combinations can be formed from the characteristic values. Otherwise, the layout will contain either very many columns or very many rows..
    Lead Columns,
    The lead columns determine what the plan data displayed in the data columns refers to:
    If you display key figures in the data columns, then the lead column shows which characteristic values (or which combination of characteristic values) the plan data in the data columns refers to.
    If you display key figures in the lead column, then the lead column contains a list of all the key figures used in the layout. This means that each row in the data column contains the plan data for the key figure listed in the lead column.
    Each planning layout must have at least one lead column.
    Suppose Report is
    Fiscal Year                   Revenue
    2010                                500
    Then  fiscal Year will become lead colums ...
    Regards
    Sarada

  • Tcode KEFC and message:"Plan version is not supported"

    Hello all,
    Please is someone aware of solution for this situation:
    - I upload with tcode KEFC forecast datas from excel file in CO-PA
    - receiver records are created with errors
    - when I check for the errors system tells me that "Plan version is not supported, diagnosis : Plan version "0" has not been created in operating concern "1000", Procedure: Transfer version "0" to operating concern "1000" and maintain the attrributes for that version"
    - my concern is that when I check in customizing Planning, Initial Step: display view settings in operating concern details the version "0" is existingin the operati,ng concern "1000"
    So do you have a solution for this issue?
    Thanks and best regards
    JCO

    Hi Sudhakar,
    Thanks for answer but version "0" is tickled for Plan Actual, WIP and variance and I don't understand what to do about KEPM.
    Best regards
    JCO

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • "Open in Smart View" option. Hyperion Planning version 11.1.1.3

    Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
    Your feedback is appreciated.

    I understand you are on 11.1.1.3.
    However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try: 
    When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide. 
    HTH-
    Jasmine.

  • Actual and Plan Versions annual view - Multiple versions per company code

    Good Day,
    Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
    Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
    Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
    Kind Regards

    Remove restriction on comp code. There could be 2 models.
    1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
    2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

  • Error While Deleting Planning Version

    Hello to all!
    We have problem with deleting planning versions:
    1. When i try to delete planning version, i recieve ABAP Dump with CONNE_IMPORT_WRONG_OBJECT_TYPE so i can't delete any planning versions in my system
    2.Then when i try to access properties of plannining version appers the message that liveCache is not avaliable
    3. In addition when i try to delete whole model it deletes it but when i refresh the screen i see model which i have already deleted
    Please help me to solve this problems.
    Thanks in advance!!

    Hello Brian!
    Look through  this note https://service.sap.com/sap/support/notes/781817
    You should delete variant in transaction SE38 (but i dont remember what variant (but this is one of the variant in this note) exactly you should delete so try it yourself.)
    Also it maybe useful to look through this note https://service.sap.com/sap/support/notes/752838

  • COPA Planning-Upload via KE13N

    Hi Experts ,
    I am doing COPA planning , but stuck with the excel upload via T code KE13N.
    -I have defined the planning level on the basis of the sales organisation
    -Planning packages on basis of years.
    -Paramater set has also been defined. Integrated excel is checked here .
    -While saving the planning layout i have defined the coloumns for Company code, distribution channel, division as Lead columns.
    When i am trying to execute the parameter set, excel gets generated. i am unprotecting the excel and doing the changes in layout, Since i want Characteristics in rows and Values in their corresponding columns . i save that excel to my desktop in text format.
    After this in KEPM i goto settings > fomatting > Save file description.
    It gives me mesage " File description 02_CE1CA00__SAP_001TEST7 was saved"
    After this i goto KE13N and trt to upload the text file i created before but i get the error message
    "File description 02_CE1CA00__SAP_001TEST 7 does not exist".
    Cld u pls advise where i am going wrong .

    Hi Christian,
    Thanks for your reply.
    I have corrected that error, now if i am trying to upload it is giving me the below 2 errors :
    1.Entry should have template  ___.____
    Message no. RRKEB001
    2.Error occurred when generating data for the planning processor
    Message no. K9400
    Cld u pls help me with this .
    Thanks !!
    Mani

  • Inspection lot creation based on "right" inspection plan version

    I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
    When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
    Is it possible ?
    When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
    Regards
    Silly

    You need to use one of the enhancements that Do-Wook has suggested.  There is no standard SAP way to suppress the inspection based on the vendor batch number.
    With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series.  In this case, the lot isn't created than due to the inspection lot control of the inspection type.
    With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
    You'll probably need to do one or the other.  Myself, I prefer the first enhancement.
    Craig

  • Error during creation of  Planning Version in SAP - ICH

    Hi All,
    I'm working on SAP-ICH, in that i tried to create planning version after creating the planning model but the system is giving information " General error in model/planning version management " . Could you please tell me the reason why this is happening and how to rectify the problem.
    Thanking U all in advance.
    Yashu Vyas.

    Hi Vashu
      My name is Vinod Tiwari.I am a SAP Technical Consultant with 4 years of exp in ABAP.Now i have a interest in SCM ICH 5.0.Could you pls guide me whats the way to start learning this.
    Mo mobile no is +919899119182.
    u can mail me ur valuable suggestion on my mailid [email protected]
    Waiting for your reply.
    Thanks and Regards
    Vinod Tiwari

  • Want to copy actual data to plan version for profit & cost center

    Hi,
    I want to copy data from actual to plan data for first half of the financial year.
    I was trying with T-Code CP98 . Are any Configration settings required to be done?
    But facing error "you have not selected a traget project" 
    Is there any other way out for doing these activity?
    Thanks & Regards,
    Mayur
    Edited by: Mayur on Feb 23, 2010 11:56 AM

    Hello Mayur,
    Please try with KP97/KP98 transactions.
    I suspect, that you are giving wrong target plan version.
    Please check your entries once again.
    Regards,
    Praisty
    Edited by: Praisty on Feb 23, 2010 12:04 PM

  • "no active plan version exists" while adding system in partner profile

    Hi,
    i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
    Can anyone answer me how to do the set active plan version. I asked my functional team and  they didnt know how to set it.
    Thanks,
    Gowthaman.

    Thanks Sonia,
    in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
    Now i am getting different error while creating partner profile in we20..
    *Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
        *Message no. E0624*
    *Diagnosis*
        *Object CENTRALADMIN of type US is not known in the system.*
    *Procedure*
        *Enter a valid object and check the type.*
        *Make sure upper case and lower case are used correctly.*

Maybe you are looking for