COPA realignment in R/3 and affect in BW

Hello Everyone,
When realignment is done in R/3 the delta in BW that has been running is "deactivated". So a new delta init must be done. With this said, is it correct that all data in the InfoProvider (that is within the timeframe of the delta), must be deleted from the InfoProvider?
This seems simple enough to me, but I just want to make sure to avoid any issues.
Thank you,
Colleen.

Hi Michael,
I think you can still maintain instead of reintializing if you can set the 'Flag Dirty' in table TKEBWL
Check the information from sap notes
The extractor looks for a realignment run and will invalidate the delta capability of the datasource order to avoid inconsistent data in BW. The customer has however the possibility to set the 'flag-dirty' in
table TKEBWL to avoid reinitialization when they are not concerned with reporting inconsistencies between R/3 and BW. (R/3 will return different values than BW for the same selection parameters without the reinitialization of the data) You can set the "flag-dirty" in table TKEBWL but the table is set at "no table maintenance allowed" so you'll have to write a program to fill this flag. Development states to use "just one update set..."
The flag has to stay as long as you want to do delta updates for the datasource without doing an initililization..
And i don't think there could be any issues even if you delete and reinitialize.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Similar Messages

COPA realignment?

Dear BW gurus,
I have a few questions about COPA realignment:
1. Who does the COPA realignment in R/3? Is it Functional SD or CO people?
2. What are the activites that a BW person has to do in R/3 and BW after the COPA realignment has been done in R/3? Please give the steps and any docs/links that provide this info?
Thanks a ton for your time and effort.
Thanks
Raj

Hi,
1) normally the co people
2) you need to reinitialize your delta again.
a) via complete load of the newly realigned data or
b) just via a init without data transfer (to keep the history) and load the new deltas then.
Mostly you do a).
Siggi

I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?

I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?

Highlight the movie, go to iTunes menu ADVANCED and select create iPad and AppleTV version.

How to make blank copies of a PDF file and put it into the printer tray.

Dear experts,
Before you try printing the data from the FM, How tomake several blank copies of the PDF file and put it in the printer tray so that you can print just the data from the function module on it??????
Please reply.

Hi drredwood,
When you open your PDF file a yellow bar will appear on the top of the screen.
Click on 'Enable All Features'.
Then you will be able to copy the content from your pdf and to paste in any of the file.
Regards,
Florence

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

COPA Realignment in R/3 -do i need to Re-initialize the Delta Process in BI

Hi frnds,
Im facing an issue related COPA realignment,
1.Once the COPA realignment is done in R/3, Do i need to Re-initialize the Delta Process in BI?
Edited by: MohanDP on May 4, 2011 8:37 AM

But i need historical data too,so how to avoid Re-initialization to get historical data.Can u please help
if you need the changed historical data, you have no choice but to reinit. you can do this at anytime, you don't need any downtime for copa init.
M.

My iphone 5 copies every email i send and sends it back to me

my iphone 5 copies every email i send and sends it back to me
this has just started happening randomly
i have 2 email accounts on this phone an apple account (@me.com ) and a gmail account

Open the Setting app > Mail,Contacts,Calendar. Scroll down to "Always Bcc Myself" and see if that is turned on.

I have four Macs. I want to download Lion to each. Do I have to buy four copies or just one copy and download it four times. Apologies if this has been asked and answered before!

I have four Macs. I want to download Lion to each. Do I have to buy four copies or just one copy and download it four times. Apologies if this has been asked and answered before!

The best procedure is to download Lion once but don't install immediately.
First, locate & copy the installer - preferably to another drive. Having done that you can then go ahead with the 1st install.
Subsequently copy the installer in turn to each other drive and install as required.
Note: the installer will be automatically deleted at the end of the installation if on the same drive as the new installation.
If you do what several posters have suggested you will be downloading the installer multiple times - which won't cost you as long as you log in to the App Store with the same ID & password. However, It will again take the download time and the install time.
Note also: When you login to install on another drive connected to your 1st Lion installation App Store won't give you the option of another install unless you hold the Option key while clicking on purchases.

Error -Your Computer Is Running Slowly and Affecting Audio Quality

Getting this error very frequent on Users Computer - I have made sure the Physical Memory and CPU usage is below 10 still we have the error for users .
Lync 2010 Client -Is there some logging that i can enable on Client side which will give me more insight as to what is the cause of error .
Have Already Checked below links these are very generic and basic but of no help !!!
http://social.technet.microsoft.com/wiki/contents/articles/7168.lync-troubleshooting-your-computer-is-running-slowly-and-affecting-audio-quality.aspx
http://office.microsoft.com/en-us/communicator-help/your-computer-is-causing-poor-audio-quality-HA102221829.asp
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Anand Shankar

Hi Anand,
Does the issue happen only with external users or all of the users? Do you use VPN? Please provide us more environment configuration information.
Please make sure your computer’s device drivers are up-to-date.
You can try a different audio device to test the issue.
For a list of devices optimized for Lync:
http://technet.microsoft.com/en-us/lync/gg278164.aspx
Here is another similar case for your reference:
http://www.techysnippets.com/your-computer-is-running-slowly-and-is-affecting-audio-quality-lync-2010/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If the issue persists, you can enable logging tool on Lync client to simple troubleshooting the issue with the help of the link below:
http://technet.microsoft.com/en-us/library/gg195661(v=ocs.14).aspx
What’ more, you can use the following methods for further troubleshooting:
Check the monitoring report:
http://blog.insidelync.com/2012/06/a-primer-on-lync-audio-quality-metrics/
Troubleshooting Lync Call Quality Locally with Snooper
http://blogs.technet.com/b/nexthop/archive/2012/12/10/troubleshooting-call-quality-locally-with-snooper.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

COPA Realignment in R/3

Hi friends,
I have one doubt in the Realignment activity...
1. After the completion of Realignment , i have checked the TKEBWL table in R/3... It was showing that the DIRTY FLAG is empty for certain COPA datasources....
Why some COPA datasources having DIRTY FLAG as empty???
What is the relation b/w COPA DS and the DIRTY FLAG???
Pls give some solution for this.......

Hi,
After COPA reallignment in the source system delta loads fail in the BW if teh Dirty Flag is not switched on.
By default all the COPA data sources have Dirty Flag remains as empty.In order to ensure that delta records continue to come in spite of the realignment, this flag needs to be set.However this flag can't be set manually. A program needs to be written for this.
For more information you can take help from following link :-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0e0d25d-cb7f-2e10-6abd-de25831a4efb?QuickLink=index&overridelayout=true
Navesh

Multiple copies of music on iPad, and some songs play as a different song

Hi,
I've been having this weird problem that I have been looking into for many times and never have found a straight answer.
I've been finding that I have multiple copies of the same song on my Music (built-in) app on the iPad 2. I don't know why it's been doing this. Yesterday, I finally got a chance to restore my iPad 2. After the restore, the same problem consisted. Not only has that been happening, but I also have been having another weird problem with the music app too. I have a song that I want to play , but it ends up playing a different song. For example, choose the song "we are the champions" or some song, and then it plays a different song like "We will rock you" or some other song. (it's not these songs, I don't have them in my library. They are just examples) but it keeps the name. So when the iPad "says" it's playing "we are the champions" it is actually playing "we will rock you" or any other song.
Sorry if I haven't made this clear enough. I tried the best I could. I have never had this problem until I updated to iOS 5. I am currently running iOS 5.0.1
Is there any way I can fix this problem I have been having? I already tried the restore. I don't know what else to do.

I'm not sure about the playing a different song when you choose a nother, but I Just figured out the multiple copies issue.I had been having the same problem and realize that some of the songs in that album were marked as "part of a compilation." SO i went to each individual song in that album and unchecked the box (when you go to th e"get info" screen) Hope that helps.

How do I manging multiple copies of movies for AppleTV and iPod in iTunes?

I do not have an AppleTV yet, but I am considering getting one. I was wondering how those who have both an iPod and ATV manage the syncing of Movies that may have different resolutions?
If I want to have the same movie on ATV and my iPod I would need two copies in iTunes at different resolutions, correct? At least when I look at the iTunes export in iMovie it shows I can have a higher resolution for the ATV than the iPod.
So, how do you manage the auto syncing of these multiple copies so that they aren't all copied to both devices? iTunes doesn't have good Movie management as far as sub-folders, etc. I would like iTunes to treat these copies as one movie and only sync the appropriate resolution for the device.
I also notice that multiple copies then show up in FrontRow as well. It would be nice if only the highest resolution would show up.
Thanks,
Scott

Just create 2 different playlists like
Movie-ATV
Movie-iPod
Put those video files with higher resolution on playlist Movie-ATV
Put those video files with lower resolution on playlist Movie-iPod
in iTunes Preferences choose your ATV only to sync the 1st movie playlist - and your iPod only to sync the 2nd one.

Multiple copies of email accounts, contacts and notes after syc.

Can anyone suggest why after a routine sync between iTunes on my PC and my iPhone I now have multiple copies of my email accounts showing in iTunes and multiple copies of my contacts and notes on my phone?
I have no iCloud account. I do not use iCloud. I have not changed any settings for the sync, which has been fine up until now.
What I am left with is four copies of each email account on my iTunes and my iPhone, which I cannot seem to change. Outlook has only one copy of each email account. Outlook also only has one copy of each contact and one of each note but my iPhone now has four copies of each contact and four of each note.
Any ideas what is going on and how I get back to normal please! Thanks.

Tried deleting the orange account and adding it back in, no difference unfortunately.

I moved my applications folder to the desktop, but modified the applications in my dock, and now i have too many copies of the applications folder and cant get rid of them without being unable to use the applications :(

I moved my applications folder to the desktop when i first got my imac. now i want to get rid of it, but when i put it in the trash, it wont let me use the applications, even though they are in more than one folder. I am at a loss of what to do now cause i have two copies of everything. please help me figure this out.

Marisalynne wrote:
I have the applications folder in my harddrive and then the one that I moved to my desktop when I first got my computer.
Where was the one that you moved to your desktop before you moved it to the desktop?
I really don't understand what you're trying to say. If I have a folder in A, and I move it to B, then the folder will be in B. There is no duplication. I still have only one folder, only the location is different.
Furthermore, your desktop is on your hard drive. Everything is on your hard drive.

Account Based COPA Cost of goods sold and Revenue Split

Dear Experts,
We are using account based copa in a automobile company.
As per the requirement when a car is sold, depending on the customer request the car goes for a conversion. like adding Radio, Seat cover, etc
As per our setup we have different profit centers for vehicle and Parts(radio, seat cover etc) and in this case radio, seat cover, etc are the classes of the material vehicle(not separate material).
After the vehicle conversion there is a sales order raised which goes to profit center derived from vehicle material master.
As per the reporting requirement I need to spit the Cost of good sold and revenue by vehicle profit center and parts profit center for COPA reporting purpose
Is there any way to do this in standard SAP? Or I need an exit?
Appreciate your response and please let me know in case of any clarification.
Many thanks
Roy
Edited by: roy001 on Aug 4, 2011 4:52 PM

For those who may need an answer to this, our solution was the following:
1)       Created new types for SO, SO Item, Sched. Line, Delivery, Delivery Item, Billing type
2)       Created new Pricing procedure
3)       Created new movement type Y61/Y62 modeled after 601/602
4)       Mapped Y61/Y62 to account modifier ZAX.
5)       Mapped GBB/ZAX to the new account.
Benefits, they now have better view of the orders going inter-company. It is flexible enough to adjusting prices for intercompany separate from standard orders, even though for now it is a straight copy of cost. They are able to remove the sales/use tax, from the calculations. They are able to plan with these orders separated out. Plus, this will standardize their process for inter-company.
Hope this helps someone.
Cheers!
Rick

COPA realignment in R/3 and affect in BW

Similar Messages

Maybe you are looking for