COPA Report-Actual and Standard.

Hi Guru,
We need to generate ther report in COPA actual and standard. Standard derived from our cost estimate. Actual are derived actual GI/gr and Billing.  We need to compare variance.
Kindly adivse me .
Thanks and regards.
Ramesh.

Hi Srina,
You can use Actual Cositng mainly to process Mateial Ledger, the result of actual costing also can be transffer to profitability analysis in month-end to be cheked and be compared.
best regards, Takashi

Similar Messages

  • Actual and standard cost

    Dear forum,
    I would like to seek clarification.
    Standard cost of a finish goods is getting from costing run. When it is sold, the cogs is a standard cost or it is actual cost?
    If it is standard, what transaction code should I get the actual cost of goods sold?
    Thank you very much
    Srina

    Hi Srina,
    You can use Actual Cositng mainly to process Mateial Ledger, the result of actual costing also can be transffer to profitability analysis in month-end to be cheked and be compared.
    best regards, Takashi

  • Current valuation, actual valuation, standard valuation stock and Value

    Dear mat
    Please explain me the what is current valuation, actual and standard stock and its value? what is the requirement for this in business.
    Thenna

    Any help?

  • COPA Report current period and previous period issue

    Hi Gurus,
    I have defined COPA report (Tcode KE94) based on line items. Now I want all values to be displayed based on an entry parameter in terms of period. That is to say that  If I give input values of "010.2013" as a period entry , my report should display the values for the the period specified i.e. 010.2013 in the first column and in second column  values for the period 009.2013 should be displayed and in the third column values for the period 001.2013 till 010.2013 should be displayed cumulatively.
    For this, I choosed the character "period/year" in General data selection tab, clicked "Variable on/off" tab and gave values "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year.
    For the 1st column (1st column which is suppose to display the values according to selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year.
    For the 2nd column (2nd column which is suppose to display the values for the immediately preceeding period of the selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year. While doing so, I selected operator as "-" and choosed offset as 1.
    For the 3rd column (3rd column which is suppose to display the cumulative values from the beginning of the fiscal year till the period mentioned in the selection parameter), along with the character "company code" , I choosed the character "period" and selected 001 in "From" and 016 in "To" tab.
    Company Code selected in all the three columns is same and I have selected actual values i.e. 0 for "plan/actual indicator" tab.
    When I run the report through Tcode KE30 , I give values as "010.2013" for the From and To selection tabs. System shows the values as per the selection parameter in the 1st column which is correct  but display values same as per coulmn 1st in the 3rd column which is wrong because it should be cumulative. 2nd column is blank. 
    How to display the values for the immediately preceeding period and for cumulative period?
    Regards,
    makrand

    Dear Ajay,
    Thanks for the reply. Here are the screen shots.
    For the general data selection tab
    For the first column "current month" i.e. for the month
    For the second column "Last Months"
    For the third column "Cumulative" i.e. year to date
    Following is the result of KE30
    Values for the period 010.2013
    You can see that values in the report for the period 011.2013 contains value for the previous period which is 59090.21
    This value is matching when the report is run for the period 010.2013.
    But in both the reports,the figures for Current month and YTD (year to date) are same.
    Please let me know what setting is required in the current month column.
    Regards,
    makrand

  • COPA Report Sales Actual value is not getting picked up

    HI,
    I have creted a COPA REPORT that is Plan vs Actual
    all values are getting picked up in report except sales actual value .
    could you give us some informatin regarding the same ?
    In column actual sales i have selection characteristics 0 only
    And my general data selection is Record Type is From A To I
    Thanks
    Nilesh R

    HI,
    I have creted a COPA REPORT that is Plan vs Actual
    all values are getting picked up in report except sales actual value .
    could you give us some informatin regarding the same ?
    In column actual sales i have selection characteristics 0 only
    And my general data selection is Record Type is From A To I
    Thanks
    Nilesh R

  • Report for production order with actual and target cost for each

    Hi
    Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
    I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
    thanks in advance

    Thanks a lot for that.
    I'm a little confused with the columns in the report.
    Which columns should I keep for my requirement? -
    Production Order
    Total Target Cost
    Total Actual Cost
    Total Actual Qty
    Total Target Qty
    Thanks

  • Actual and Commitments values are not Appearing in Internal order report

    Hi
    We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
    So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
    Please help me in this regard...
    Thanks,
    Saisri

    Hi,
    Here we are giving internal order in PO with account assignment category 'A'
    In case of Account assignment category 'K'  it is showing the Actual values in Report.
    Why is it showing Actal /commitment values incase of 'K'  ?
    Why it is not showing when we select the 'A' category ?
    Please provide me answer about my queries...plz
    Thanks,
    Saisri

  • Report displaying Material Standard Price and PO Price

    Hello Experts
    We have materials which are purchased. Price control is maintained as standard price and standard price is maintained using T Code MR21 periodically.
    Due to this when PO price is different from standard price maintained in material master (usually PO price is higher than standard price) all price difference are posted to price difference GL at the time of GR.
    Now users want to check variations between standard price and PO price for the material receipts.
    Can anyone suggest me any report which provides details of standard price and PO price for the material receipts?
    Thanks in advance for your help.
    Satya Alapati

    Nothing std I'm aware of either.  You could consider using the messages 06 205/6/7 to get a warning at the time POs are created that price varies significantly from std.
    Config help text below:
    Set Tolerance Limits for Price Variance
    In this step, you define the tolerance limits for price variances.
    When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
    Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
    In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
    Standard settings
    The standard SAP System supplied contains the following tolerance keys:
    PE Price variance, Purchasing
    Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
    SE Maximum cash discount deduction, Purchasing
    Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
    Note
    You can specify whether the system message appears as a warning or error message using the menu options Environment -> Define Attributes of System Messages.
    Activities
    Maintain the tolerance limits for each tolerance key per company code.
    Regards,
    Nick

  • Restatement and COPA Reporting

    Hello Everyone,
    I was wondering if anyone could share their experience with COPA reports with restatement...basically how to handle COPA restatement and reports.  Any pitfalls, anything at all.
    Thanks everyone,
    Colleen

    Hi Ashok,
    My email is [email protected]
    Thanks,
    Colleen

  • Report to check Standard WBS link to which standard network and activity

    Dear All,
    Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
    Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
    Thank you.
    Nies

    Hi,
    Please try this:
    1. Tcode : CN41
    2. Change database profile: In that in the origin check mark the Standard structure. Continue..
    3. At the bottom of the selection screen check mark the standard structures.
    4. In the selction area for the Project hit F4 and  select the project based on the standard WBS Element.
    5. Exceute the report.
    Hope this is useful.
    Reward points if found useful.
    thanks..

  • RE: COPA report and customer line item report not matching

    Hi All,
    COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

    ok

  • COPA report and purchase order value mismatched

    Dear Experts,
    In copa report ke30 COGS value come Rs 12129805 and in purchage order it shown 767537.34 which was assigned the sales order.
    In KE33 report i checked VRPRS was th value field which data flowing to copa and input parameter recoed type B to F.
    VPRS condition type assigned wit VRPRS value field in ke4i(Assignment of SD to copa value field).
    Please suggest why data coming mismatch.
    Regards,
    Debashis

    Hi,
    There could be difference in material prices mentioned in the PO,
    and at the time of PGI/billing. check material prices
    Please check material prices for those material for the period.
    Regards,
    Kedar

  • Customized and Standard Report

    How we can differentiate between Customize and Standard report???

    Hi Mike
    thats a tough one, the PO generation is a bit restrictive to say the least when it comes to customizing. It sounds like you have worked out how to get your own template in there to render the PO.
    On the data front, all I can think of is to customize and replace the seeded PO view with one that incorporates your extra data.
    Or, get into the page customization world and write your own extract and format concurrent program/procedure and then hook it onto the buttons where you want to launch it.
    You might have more luch, response wise from the EBS PO forum.
    Procurement : Procurement
    OAF: OA Framework
    Regards
    Tim

  • Expense report and Standard Invoice in ap.

    hi
    Difference b/w Expense report and Standard Invoice in ap. plz give me example
    thks

    Hi,
    AFAIK Oracle EBS does not keep that sort of info. When looking for the payment you may know that both documents were included in that payment. But when looking at the the invoice or at the DR/CR Memo you will not see any cross reference between them.
    Octavio

  • Actual quantity updation in COPA report

    Hi Experts,
    How to update the actual quantity in copa reports. At present we are getting the plan quality in copa reports. Any settings are missing or what could be the reason for this updation.
    Can any one please clarify this issue
    Regards,
    Ram

    Hi
    If you are in MTO, follow the steps below to update sales Qty in COPA
    1. Go to your PA Trf Str in KEi1
    2. Add an assignment line to it, say, 100....
    3. TICK the QTY BILLED/DELIVERED for this assignment line
    4. DO NOT assign any cost element in SOURCE
    5. Assign a COPA Qty Field for this assignment line
    6. Execute VA88
    Br, Ajay M

Maybe you are looking for