COPA reports - Quantity in alternative Unit of Measure
Hi all
My clients requirement is to dispaly quantities in both base UoM and alternative UoM in COPA reports. Alternative unit of measure and the conversion factor is maintained in the additional data of material master. After reading through several forums and documentation, i understand that this can be achieved using COPA enhancement COPA0005.
I am thinking of creating new value field to store the quantity in alternative UoM and to calculate the required quantity using the conversion factors in MARM table.
But I have a few questions regading the same.
1. There are 2 function modules EXIT_SAPLKEII_001 and EXIT_SAPLKEII_002. Which one should i be using for my purpose?
2. Should enchanement COPA0003 be actived first to make COPA0005 active?
3. Is any other configuration required apart from created in new value field for quantity in alternative UoM.
Thanks
Vamsi
Edited by: VamsiM on Mar 17, 2011 7:21 PM
Thanks Ajay for ur reply.
When I created the quantity value field (say VVXXX), added it to Op. Concern and regenerated the structure; the system itself created the quantity unit field VVXXX_ME for alt UoM. This field is also added to field catalougue and is also readily avialable for used in KE30. So I didn't have to create a new Characteristic.
In my case, the alternative UoM is not the same and depends on the material.
Similar Messages
-
Sales Information System (SIS) Reporting- Alternative Units of Measure
Guys,
Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
Thanks a LotHai john ,
If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs .How to make program for calculating formulas.PLs reply me asap
Thanks in advance
viswa -
Alternative unit of measure in BOM explosion report
Dear gurus
I want to get the alternative unit of measure along with the base unit of measure during the BOM explosion report in CS11.I tried with the layout but I cant find the same.
How is this possible?
regards
kumar sHi Kumar,
You can develop a Z report. In the standard CS11, the functionality of displaying the alternate UOM is not feasible.
thanks and regards
Muruegsan -
Adding alternative unit of measure field in Internal Goods/services link
Hi Experts,
I have a requirement to display an Alternative unit of measure in the Add Internal Goods and services link of ADD ITEM tab in Shopping Cart which comes when user clicks the product id hyperlink of INTERNAL/GOODS AND SERVICES.The Alternative unit should be displayed beside the field Quantity unit .
If anyone has worked on this, Could you kindly help me out on how to proceed further ?
Thanks in advance,
umabalam.Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Stock and Values in Alternative Unit of Measure
Dear Experts,
Can anybody suggest me any Standard Report for Stock and Value in Alternative Unit of Measure.
Regards,
vgl
Edited by: vglokam on Aug 16, 2010 8:56 AMHi,
you cannot take stock report with alternate UoM. Alternate UoM is for "ORDERING" purpose only and not for SKU.
Arul -
QAC1 in alternative unit of measure
Hey All
I need to know how can I make the quantity correction of actual quantity of inspection lot based on the alternative unit of measure not the base unit of measure?
I have inspection lot (04) where it's actual quantity is in base unit of measure M2 but I need to make the correction in CAR which is the alternative UOM.
As i know there is a SAP not that allows the posting at UD to be done in alternative unit of measure so I am asking if there is any similar solution for QAC1?
I need that urgently and Thanks in advanceAs i know there is a SAP not that allows the posting at UD to be done in alternative unit of measure so I am asking if there is any similar solution for QAC1?
No its not possible !!
check Note 605861 - Provision of a BAdI for input help for quantities in UD -
GR IN ALTERNATIVE UNIT OF MEASURE
Dear Friends,
I want to know report for GR of production order in alternative unit of measure for a specific day.
Plz help me
Thanks
KKHi,
There is ni standard report in SAP for this.
As for the GR, this cannot be changed, you can disply stock in L or EA in many reports and transactions (MMBE and the physical inventory transactions can all be in either UOM for instance) but the main UOM for stock is the UOM defined on the issuing UOM on the plant / storage view of the material master. Or use MB51with movement type.
Or try report 'SAPMUNIT' from SE38
Regards,
R.Brahmankar -
RWBE and changing Alternative Units of Measure
Hi
I'm trying to use RWBE to view the stock holding of multiple materials. I want to change the base unit from Ea's to TON's for all the materials in the list however it seems that I can only do this one at a time for each material in the list. If I change the list display to the "Tree Structure" I get an ABAP dump when attempting to convert all the items at the same time.
Can this be done using RWBE or is there an alternative report which can be used.
Thanks in advance
FYI- MMBE is not an option since I need to view materials u201Cen massu201DHi,
To Check the available unit of measures or to create below gfiven the Path
SPRO->General Settings->Check Uuits of Measurements
Please check whether Alternative Unit of measure is maintaind.
Regards
Reward Points if useful -
Table for alternative unit of measure
HI
I have created a material whose Basic UOM is Kg
I have maintained alternative unit of measure as TON and maintained the relationship 1 ton = 1000 Kg in material master -- additional data -
units of measure.
I want to capture the data for creation of report ....In which table this data is stored ?
Thanks
SaraMARM
-
Creation of Inspection lot in Alternative Unit of measure
Dear Guru,
Our implementation is going on in a Tube manufacturing company where Base Unit is maintain in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.Hi,
1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
2. add unit of issue as a Pieces in MM QM view
3. add in inspection paln Unit of measure as Pieces ( if possible )
Now during stock posting post the stock KG and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
Experts pl guide if i am wrong anywhere -
No alternative unit of measure specified, during creation of sales order
Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh VeerepalliDear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X AUn Measuremt unit text Y BUn Measuremt unit text
1 L l <=> 1 L l
1.121 KG kg <=> 1.000 L l
1 PCE Piece <=> 1 L l
1 BDL Bundle <=> 12 L l
1 PAL Pallet <=> 720 L l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
This alternative unit of measure is missing.
3.System response :
The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks -
Adding Alternative Unit of Measure to Outbound idoc
Hi gurus,
I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
Thanks!
WillHi Will
Unit of measure at item level is in
Segment --> E1EDP01 : IDoc: Document Item General Data
Field --> MENEE : Unit of measure
Do you want to convert the Unit of measure in outbound idoc?
Use conversion rules for this...
or
do you want send Unit of measure and secondary unit of measure ??
extend the idoc type and write user exit to populate date in extended segment...
i hope above info helps you
Thanks
RAMESH -
Adding Alternative Unit of measure as part of attributte of material
Hi gurus,
In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
I need to add this info as part of material attribute
e.g.
Material "A" 10CART = 1 PAL & 100CART = 1MT
This information captured in MM table "MARM" with material code as the
As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
CARTPAL = 0.1 (1/10)
CARTMT = 0.01 (1/100)
Please help to advice on how to enhance the extractor to cater the above requirement.
Your help highly appreciated
Thank youhi,
According to me you can enhance the 0Material_attr to bring the required information from ECC.
But before enhancing anything ask func consultant or business below ques.
1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
2) will this unit value get change for any material during its entire life
If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
For that u need to apply feedback concept in transaction dso.
Regards,
Ashish -
No alternative unit of measure specified
Hi,
We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case.
Hope you could help us.
ThanksHi
In the confirmation screen, in the yeild unit field is there. open the field there and check whether you units are displayed there or not. If they are not defined there then open the table and update your units there
Krishna -
Report Data in Alternate Unit of Measure
Hi
We are working on Unit of measure Conversion for this we are following How To .Report Data in Alternate Units of Measure document. We did all the steps as mentioned in the document still this is not working. All results are showing zeros with same units of key figure qty like EA, ROl, Boxes and so on. We want to convert this into Cartons and Pallets. My question is is there any thing we need to do which is not mentioned in this white paper.
For example maintaining Conversion Factor in R/3 side?
Do we need to add Conversion factor Key figure to Transfer Structure and Info cubes?
(Which is not mentioned in the white paper) if so which field we need to map this in Transfer Structure?
We are in Version 3.5
Thanks
NagaNaga,
For your first question.....you can "maintain" different units of measure in 0MAT_UNIT, but at one time you can report on only one alternate unit.
For your second question, I have a feeling that it is the problem with your enhancement to the std SAP code which is mentioned in the How to Paper. After you have done the enhancements did you activate the programs again? If there is somebody with you who is good in ABAP just run this enhancement through him.
Also just make sure you have followed everystep in that how to document, including the query designer part of it.
According to the logic of that paper, if the alternate unit is not available, then it is supposed bring back data in base unit, it is not supposed to error out. Check your ehancement piece again.
Thanks
Yashu Raj
Maybe you are looking for
-
Table name for opening and closing stock
Hi gurus, i want table name for opening and closing stock . How to calculate this opening and closing stock in report. Murali.
-
Viewing .pct / .pict files in Bridge CS3
Hello there, I'd like to view .pct / .pict files in Bridge, but I am not getting any previews. I've tried to find a topic about this but haven't had any luck. Does anybody know a way to view them... a plug- in maybe. Or is that going to be the 'way i
-
How can we bind Two Static Lists to a single Column.
Hi All, My requirement is 1) I have two different Static List's. 2) These two static list's are saved to the same column in the database table. 3) In the UI, I will be having different dropdown's. And each dropdown is bound to this column. Say if I h
-
New S6 and can't change language
Brand new phone, had hand on screen when i turned it on and it went to French, I can't change it as I don't speak French
-
Help to Slove a Problem ...
500ml,300ml glasses. How will you dole out 100ml,200ml water? this is the problem.. I need to use this in a program...but unable to solve it. pls help! s it possible to solve??