COPA Segment Not Updated during AFAB Run

Hi Experts,
While running AFAB run system is not recoganising the Product Category and Sales District
which is maintained in " KEDR" .
If we enter manually the entry in the system We will have to press one screen Derivation " Where it will pick up " automatically.
Is there any solution for this,
thanks,
regards
N. Kumar

Hi Siva,
I will brief the Scenario;
We have one Asset Class for Low Value Asset.
While running AFAB T-code System is not updating the COPA Derivation which is configured under KEDR.
Where the same has been updated while AFAB run ie Normal depreciation Items.
This is our problem,
regards
N.Kumar

Similar Messages

Apps not updating during sync

apps not updating during sync

It sounds like your iPad is sleeping or you lose your connection before the process completes. Try plugging the iPad in to a power out and do the update. Make sure you have a strong wifi signal.

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Indexed field num_comments on blog post not updating during incremental crawl

Hi,
Have a webpart that rolls blog posts from MySite and other Team sites.
Everything works fine excepts that the property ows_numcomments (which I have a managed property mapped to) is only updated after a full crawl has run (ie once per night or manually started).
Why is it so and what can I do to make updating during an incremental crawl?
Thanks,
/Owe
Background:
Query resulttype is RelevantResults
TrimDuplicate is true
MPNumComments is mapped to ows_numcomments
Searchstring
"SELECT Title, Author, Path, SiteTitle, MPNumComments, MPPublishedDate FROM SCOPE() WHERE scope='Blogs' AND contentclass='STS_ListItem_Posts' ORDER BY MPPublishedDate DESC";

Can you do full crawl and check this property is getting updated. If not then either incremental crawl is not updating the value or there is some problem with the field configuration.
Regards,
Milan Chauhan
LinkedIn
|
Twitter | Blog
| Email

WBS not updated during MIRO to asset

Dear Gurus
Our task is to post invoice directly to asset using ME21N->MIRO (without delivery) approach and get statistical WBS element commitments and actual values updated.
Commitments (ME21N with AAC "A") are working fine (using statistical cost element 90cat.)
During invoice posting (MIRO) no error generated; asset is capitalized with actual value; WBS element commitments reduced; BUT WBS element actual values not updated.
Configration:
1. Account assignment objects PS_PSP_PNR and PS_PSP_PNR2 activated
2. Acc.assign. objects specified in used depreciation area as "01 APC values posting" Acc.assign. type
Where could be the problem?

I agree, but in our case receipt (MIGO) is organizationally useless. And I don't want to belive this is the source of the problem. But I could be mistaken.
By the way I tried simulate process with MIGO - same issue.

RBA STO is not correlated during BOP RUN

Hi all,
We are facing a problem with delivery groups correlation during BOP when one of the items of the delivery group is confirmed using an STO created by RBATP.
For example, let's make a simple case
Product A,B and C are part of the same delivery group.
10 units of both products are requested.
Product A is confirmed in full using an STO from another plant created using a Rule
Product B is confirmed partially (say 5 units)
Product C is confirmed partially (say 4 units)
In BOP filter we have added only products A and B and checked "Correlation" parameter, so product C is added and correlated to the other two. We do not want that an ATP check be done during BOP for product C, so "Check Correlation Group" is not checked.
After running BOP, products B and C are properly correlated. While product A is not correlated an is confirmed for the full quantity.
It looks like during BOP, the ATP check is done as first step (and in the case of product A an ATP tree is created) and afterwards quantities and dates are correlated, but this correlation is not capable to modify the ATP tree.
Thanks in advance for your kind cooperation
Pablo

Hello Michael,
Yes I have already checked this note. Please note that as long as the activity in the rule is to create an STO no subposition should be created in Sales Order, so this note does not apply to my case.
On the other hand it is very interesting and helpful this part of your answer
Michael Thinschmidt wrote:
> Yes indeed quantity correlation should not work at STO level as it is not implemented in the coding. Just the date correlation should work.
Could you please refer me to any note or document where it is explained this situation. I have checked and rechecked notes and help and I have not find any hint a reason for this behavior.
Thanks in advance for your kind cooperation
Pablor

Do Not Update Display when running Batch Processes

This has been the case since the beginning of time so it would be great if this could be sorted.
I'm sure batch processes would be immeasurably faster if Audition didn't update the waveform display with every single process. When I'm batching hundreds of WAV files this makes things sllllooooowwwwww.
An option before running the batch to 'do not update waveform display' would be a godsend.

Bump

WBS not updated during asset invoice

Dear all,
I post an invoice through MIRO for an asset and i enter a WBS element. However, the line item of the asset is not updated and the WBS element is also not updated with the actual posting.
On the other hand, if i enter an expenses account everything works perfectly.
Any suggestions?

Hi,
Usually you should not assign Cost objects to balance sheet accounts. It has to be assigned only for Profit and Loss accounts.
For assets you can maintain the WBS element in Asset Master creation AS01 and that WBS will be taken for accounting for any depreciation or expenses posted for that particular assets.
thanks and regards
Praveen.J

Calendar not updated during importing MS Project

Hello guys,
I tried importing our previous schedule which was in ms project format into p6. It was imported successfully but when i browse the calendar date, it was "??" . I try to change my default calendar & assigned 6day/work but still not updating when i go to the activities. Is there any fastest way to shange the caledar? As of now, I'm updating them one by one activities which is very difficult for me to change 900+ activities.
Thanks in advance.
nhel

Hello,
You can add the Calendar as a column, and then change the Calendar for the first activity (at the top).Next, select all activities. Then, press and hold the Shift key, click on the Calendar cell of the last activity (at the bottom), right-click and choose "Fill down". That should assign all the activities to that calendar.
This method works while assigning all activities in a project to a single calendar, or while filtering out a group of activities and assigning them to a calendar.
Another method is to use a customized Global Change, but the above method is a whole lot quicker and easier.
Hope this helps!

HERKL (country of origin) not updated during material master upload

Hi all,
I have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
where few ariund 800 records are not updated with HERKL( Country Of Origin).......
Could you please help on the above query.
Regards
Jagadeeshwar B
Moderator message: subject corrected, please use a more descriptive one next time.
Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

Have you analyzed what is common to the errors?
is it the countries that are used in this cases?
or is it a certain material type?
do you have any succesfull update with a country that is among the failed ?
Have you tried manually to enter this field in MM02 for such a material?
we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

Stock quotes will not update during market time, Have removed cookies and history. How do I remedy this?

Stocks symbols will not update without closing and opening the portfolio or just clicking on the stock to get the real time quote.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Withholding taxes not updated when program run in background

Hi,
in a z1 report i do:
SUBMIT z2
VIA JOB lc_jobname
   NUMBER v_jobcount
     WITH p_fecha = p_fecha
     WITH p_file   = v_file_in
     WITH p_e_file = p_efile
     WITH p_client = p_client
     WITH p_test   = p_test
      AND RETURN.
within this z2 report i do:
          PERFORM mrm_invoice_create_call(saplmrm_bapi)     USING     s_rbkpv
                                                       tab_frseg[]
                                                       tab_co[]
                                                       tab_ma[]
                                                       c_rbstat_posted
                                                       space
                                             CHANGING invoicedocnumber
                                                       fiscalyear
                                                       return[]
                                                       f_subrc.
          IF test IS INITIAL.
            COMMIT WORK AND WAIT.
          ELSE.
            ROLLBACK WORK.
          ENDIF.
the question is that if i run z1 report online there is no problem but if
i run z1 report in background, withholding taxes are not calculated.
After debugging this is what i´ve found out:
1.- in PERFORM mrm_invoice_create_call(saplmrm_bapi) there is a call to fm FI_WT_POST IN UPDATE TASK
2.- in FI_WT_POST table WITH_ITEM is updated
i guess this could be due to a delay in updating the table so i´m considering doing a WAIT UP TO X SECONDS.
why is it working in online mode but not in background mode?
any idea?
Best regards.

Hi,
in case someone is interested this is how i solved the question:
i had badi MRM_WT_SPLIT_UPDAT implemented.
in this badi implementation i had this code (among other checks too):
CHECK sy-tcode = 'MIR4' OR sy-tcode = 'MIR7'.
this code avoided the background job case.
It seems that In a background job sy-tcode is empty.
so i just needed to add this:
CHECK sy-tcode = 'MIR4' OR sy-tcode = 'MIR7' OR sy-batch = 'X'.
and then withholding taxes reappeared again.
(so sad, so true... one day of debugging, sigh)
Best regards.
Edited by: Pablo Casamayor on Feb 2, 2012 4:53 PM

Balancing field "Profit Center" in line item 003 not filled during AFAB

Hello all,
We have activated business function FIN_GL_REORG_1 on EHP5 in ECC 6.0 and related reporting business function. One of the advantages of activating this for Fixed Assets is now asset balances can be reported at Profit Center/Segment level in sub ledger.
During executing depreciation, we are getting the below error message
Balancing field "Profit Center" in line item 003 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting.
Below configuration is done in our system -
Document splitting is active with standard variants for FA accounts.
Segment Reporting is actived under Asset Accounting IMG (under Integration with General :edger Accounting)
Activation of account assignment objects is active for cost center and specify account assignment types for account assignment objects KOSTL is configured for all transaction types (*) for APC and Depreciation postings is activated.
APC, Accumulated Dep and Dep expense account field status groups are changed to have profit center and segment as optional fields for inputs.
After all these settings, I am still getting the above error message.
Can someone please let me know if you had similar situation and how to resolve this issue.
Thanks,
Praveen

Hi
Check the below locations
Fin Accounting(New)Fin A/c Global Settings NewLedgersAssign scenarios and Customer Fields to Ledgers (Here assign Profit Centre)
Fin AccountingGL Accounting NewBusiness TransactionsDoc splittingDefine doc splitting characteristics for GL Accounting (Here Profit Centre mandatory check) Check with Activate and Deactivate
Regards
Sridhara Rao D

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

Profit Segment not activated during creation of purchase order item

Hello,
While I create a Purchase Order Item, in the account assignment tab, I may fill in at least a cost center or a cost center and an internal order.
If I fill in only a cost center and key the enter buton, the profit segment is activated.
If I fill in the cost center and the Internal Order at the same time and afterwards I key the enter button, the profit segment is not activated. I have to click on the Profit segment button and validate the profit segment manually.
Could you tell me what the problem is?
Thank you in advance
Regards

Hi
That makes sense to me
In any entry you can enter One REAL Object and more than one Stat Object...
SInce you entered Cost Center in Option 1 - You were proposed with PSG and IO as the option
Since you entered Cost center *** REAL IO in Option 2 - The system got what it wanted i.e. One REAL OBJECT.. hence, no more objects are proposed to you... However, you can manually enter PSG or WBS if allowed in your Field Status Group in FI
br, Ajay M

COPA Segment Not Updated during AFAB Run

Similar Messages

Maybe you are looking for